So it all started when i had flashed JV1 and after a while i couldn't stand with the small problems i had so i tried to flash back to stock JS5 but then it didn't reboot
Then i just flashed to JP2 as i always do when i have problems. Rebooted succesfully and then i tried to install voodoo to get 2e recovery but when i flashed it didn't reboot.Then i again flashed back to JP2 and after that tried the darky's ressurection (odin) edition. Didn't work either. after that flashed back another time and tried xxjpy but didn't work either What to do??
Try jpu with reparticion first and pit 512.
Sent from my GT-I9000 using XDA App
Related
Once after restarting my galaxy s i9000 i could not get phone signal. I reinstalled eclair with odin and it worked properly. then using clockwork recovery and returning back to doc 5.1 the phone signal is still not there. tried dark's 7.0 too. with the same result no phone signal. any help is appreciated
Since you recovered all settings went back.i had this once.maybe try to flash a modem file with odin,no repartition and no pit clicked.
Sent from my GT-I9000 using XDA App
I did not revert back to my old settings. I checked re partition and installed eclair. Then i flashed doc 5.1 without restoring my settings. Plus i tried to manually push modem.bin file using odin. No result
Can you check if you Flight mode is working or gets stuck?If it gets stuck then there is something wrong with modem version.When it happened to me i had to flash a 2.2 modem to get it to work.
Yes my flight mode did get stuck. But i tried installing new XXJPY firmware's modem through clockwork recovery and still same result. Which one did you flash? Plus my baseband version is unknown in the settings app.
I was on stock JPU at that time,i had flashed it through Odin and by mistake i had not clicked Modem and flashed without it while i was at work.Then i got home and didnt have JPU there but had JPA so i though,wtf,it was on factory reset anyway(after i had a major brick) and flashed the JPA modem on its own,no pit,not repartition,did a factory reset again,clear cache and it worked.Hope it fixes yours too.
Tried that too. Still the same. No difference. I am getting the range in eclair but not in custom firmwares. Plus the baseband is unknown
Hi guys i searched for other threds before making this one but none of them had download mode working
i tried flashing jpy and jpx with odin using the 512 and the 813 pit files, my problem is that after showing the sgs screen(really effing loud) the screen goes dark and vibrates in a pattern that goes like ........1....2................1...2...........1............2 and repeats, i can accces both the download and recovery modes
Extra maybe important info:
came eclair jm4 flashed with kies then from jm7 i think with the bujp5 modem(the vodafone one) tried to flash jpy & jpx still stuck on darkscreen
in odin i only had the pit+pda checked with repartition, autoreboot and f.reset time ticked. Did i miss something?
I also tried to flash jpo, no dice.
Try to flash an other firmware (2.1)
Take it from samfirmware
They supply 3in1 packages that need to be put in only pda
Use pit 512
Repartition
If that worked, then try a 2.2(.1)
______________________________
Send from my shiny gadget!
Cypher_X said:
Try to flash an other firmware (2.1)
Take it from samfirmware
They supply 3in1 packages that need to be put in only pda
Use pit 512
Repartition
If that worked, then try a 2.2(.1)
______________________________
Send from my shiny gadget!
Click to expand...
Click to collapse
As Cypher_X said try 2.1 i always go jm8 never failed me
Ok thanks gonna try with that
Sent from my X10i using XDA App
Ok that worked booted up perfectly fine but....I retried flashing jpy and I keep getting the damm dark screen could the file be corrupted or something? Also don't know if this is normal but after flashing I always get booted up in recovery that didn't happen when on kies again don't know if this is normal
calexus1182 said:
Ok that worked booted up perfectly fine but....I retried flashing jpy and I keep getting the damm dark screen could the file be corrupted or something? Also don't know if this is normal but after flashing I always get booted up in recovery that didn't happen when on kies again don't know if this is normal
Click to expand...
Click to collapse
Where did you get jpy from? I got mine from samfirmware and had no dramas. Went from jm8 to jpy you could always flash a 2e recovery kernel cf root for example then install cwm so you can install custom jpy roms..i use darkys and love it
Got it working : D For any future reference flash jm8 with repartition on then jpy with repartition off...
on another note what do I do when I already have jpy working and want a clean instal of it plus different modem and kernel? (repartition on/off, do I use any pit files ?
Happy new year
can someone please tell me where to get these files from?
i've searched but keep getting the wrong pit or stock firmware..
i'm a noob and i'm confused, excuse me of my ignorance but i've tried sooo much lol
btw i have a bell I9000M which i think is my problem.. help
Odin gets stuck when trying to flash JV1....
Gladly I can still use download mode so I'm able to restore my galaxy s....
But I really want to install gingerbread... any ideas on how to install it?
I uploaded an image of the part where the flashing gets stuck... in the image iim using pit 512 but I have also tried with 803 and I get the same result... after odin fails I can disconnect my galaxy s... and boot into download mode again
Have you tried to download odin 1.3 maybe this one is corrupted. Try to restart pc, run odin, put all files, connect the device.
Sent from my GT-I9000 using XDA App
I 've had the same problem. Flash with Odin 1.3 should work.
I tried with odin 1.3 too...
And it didn't work either =/
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
renatofontes said:
I tried with odin 1.3 too...
And it didn't work either =/
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
themate1987 said:
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i am on darkeys 9.3 now how can i flash ultibread 1.4 pl guide me step by step
I will PM when i get home
naishadh said:
i am on darkeys 9.3 now how can i flash ultibread 1.4 pl guide me step by step
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
themate1987 said:
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Sadly that didn't work either... D:
I'm downloading the JV1 rom directly from samfirmware and if ir doesn't work again I'll try flashing from another computer =)
Well now that JVK has been released I tried flashing that too...
And I can't
It's really weird the bootloaders just don't seem to want to get into my phone x3
I tried using odin and heimdall using the version with the safe bootloaders and it never flashed completely.
Gladly my phone hasn't been bricked... maybe it's because odin and heimdall don't ever get close to flashing the bootloader?
Anyway... I have a mexican galaxy s... I think the name of the model is I9000T
Can someone help?
I was on Vodafone UK JS3 froyo 2.2.1. After using OCLF 2.3.0, I later decided to downgrade to froyo 2.2 JPY using clockworkmod.
I forgot to disable OCLF before restoring my old rom. My phone boots to the Samsung galaxy screen and ends there.
Download mode works. I`ve flashed stock JS3 rom+pit 512 with odin, but nothing.
I flashed voodoo lagfix, hoping it will convert my internal flash to ext4 so I could then disable it and it will convert the whole flash back to default to get my phone booted.
I donot know if OCLF spoiled my phone because it was not disabled, or even what went wrong. Please can someone help?
a67543210 said:
I was on Vodafone UK JS3 froyo 2.2.1. After using OCLF 2.3.0, I later decided to downgrade to froyo 2.2 JPY using clockworkmod.
I forgot to disable OCLF before restoring my old rom. My phone boots to the Samsung galaxy screen and ends there.
Download mode works. I`ve flashed stock JS3 rom+pit 512 with odin, but nothing.
I flashed voodoo lagfix, hoping it will convert my internal flash to ext4 so I could then disable it and it will convert the whole flash back to default to get my phone booted.
I donot know if OCLF spoiled my phone because it was not disabled, or even what went wrong. Please can someone help?
Click to expand...
Click to collapse
so first OCLF is ext2 with system binds, so voodoo won't help
Flash a Rom with 3 Parts + .pit file and repartitiom checked
than you should be fine i always flash back to eclair when a flash fails so keep tryin
Sent from my GT-I9000 using XDA Premium App
Thanks very much. Your solution worked. But I directly flashed 2.2.1 JPY
There's a problem that I've came on while downgrading to stock 2.3.3 from MIUI 1.11.11 2.3.7 with CWM. I've wiped partillion chache and dalvik chache, installed rom XWJVH (it went correctly) rebooted, it stuck on booting screen. Restarted into download mode tried to install another kernel (cf-root 3.2 because it worked in past) and got fail in Odin.
Is my phone fully bricked? 'Cuz I can't get into CWM anymore.
HELP PLEASE!!!!!!!!
If u can get into download mode, you will be fine. Just flash a full stock rom with odin.
If u still have no joy, flash eclair jm9 (from samfirmware.com), it will resurrect most fxxk ups.
Sent from my GT-I9000 using xda premium
woolf clubs said:
If u can get into download mode, you will be fine. Just flash a full stock rom with odin.
If u still have no joy, flash eclair jm9 (from samfirmware.com), it will resurrect most fxxk ups.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Ok, let's try but on other combinations Odin said connecting after starting a process (tried 1.3, 1.7, 1.8 versions to flash 2.3.3 and 2.3.5, none worked) but whar if it will not work? What next, because on recovery it gives "black screen of death" as said in this topic:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Series
But at least download mode works.
P.S. I get modem and code files in jm9 download, which to put in pda? csc?
Is odin detecting your phone, yellow light?
Sent from my GT-I9000 using xda premium
yes it detected.
AND YES its going now, I've put pit file in and it is working now!!!!!!!
PASSED in odin, booting up........ boot logo......... please boot up!
something wrong, boot logo loop.
flashed cf-root 4.3 and I hope for the best.
P.S. nooooooooo, boot loop again
P.P.S. thank you anyway, at least boot loop is easier to work on.
Have you tried jm9 yet?
Sent from my GT-I9000 using xda premium
Taxiozaurus said:
flashed cf-root 4.3 and I hope for the best.
P.S. nooooooooo, boot loop again
P.P.S. thank you anyway, at least boot loop is easier to work on.
Click to expand...
Click to collapse
I am a little bit confused, and you too...
To bring back to life your phone you have flashed jm9, eclaire....ok.
But why have you flashed a CF-root 4.3?
It's for JVS gingerbread rom.
Edit: If your 3 keys combo still works, try to flash a stock 2.3.x
If the problems happen while using MIUI, better you select eclair rom first. Then you can upgrade to GB that have bootloader.
From MIUI directly to gingerbread will have fuzzy screen problem.