[Q] Can't flash JV1 - Galaxy S I9000 Q&A, Help & Troubleshooting

Odin gets stuck when trying to flash JV1....
Gladly I can still use download mode so I'm able to restore my galaxy s....
But I really want to install gingerbread... any ideas on how to install it?
I uploaded an image of the part where the flashing gets stuck... in the image iim using pit 512 but I have also tried with 803 and I get the same result... after odin fails I can disconnect my galaxy s... and boot into download mode again

Have you tried to download odin 1.3 maybe this one is corrupted. Try to restart pc, run odin, put all files, connect the device.
Sent from my GT-I9000 using XDA App

I 've had the same problem. Flash with Odin 1.3 should work.

I tried with odin 1.3 too...
And it didn't work either =/

I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
renatofontes said:
I tried with odin 1.3 too...
And it didn't work either =/
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App

themate1987 said:
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i am on darkeys 9.3 now how can i flash ultibread 1.4 pl guide me step by step

I will PM when i get home
naishadh said:
i am on darkeys 9.3 now how can i flash ultibread 1.4 pl guide me step by step
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App

themate1987 said:
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Sadly that didn't work either... D:
I'm downloading the JV1 rom directly from samfirmware and if ir doesn't work again I'll try flashing from another computer =)

Well now that JVK has been released I tried flashing that too...
And I can't
It's really weird the bootloaders just don't seem to want to get into my phone x3
I tried using odin and heimdall using the version with the safe bootloaders and it never flashed completely.
Gladly my phone hasn't been bricked... maybe it's because odin and heimdall don't ever get close to flashing the bootloader?
Anyway... I have a mexican galaxy s... I think the name of the model is I9000T
Can someone help?

Related

Please help

Hi I installed JVK no probs then installed the ext 4 but something went wrong so i flashed back to JM1 with odin using 3 files and checking re-partition, which is what ive got now but i am tring to root it so i can restore in CWM, but i cant root it, so far ive tried Z4root. OCroot. and flashing chainfires kernel all of which does not work. I also have a copy of O2 file from JJ which i have tried to flash but that just goes to loop. can anyone helpplease im starting to pull my hair out. I can get download and my pc does have drivers many thanks
flash something newer using odin.
JM1 is really old now, flash to froyo and flash a kernel such as speedmod, then flash what you like from recovery
azzledazzle said:
flash something newer using odin.
JM1 is really old now, flash to froyo and flash a kernel such as speedmod, then flash what you like from recovery
Click to expand...
Click to collapse
Just downloading JP6 now from samfirmwares what is the best way to root this please so i can flash speedmod
I use js7 to flash back then i use jva and cf root and extra tools to convert to ext 4 now its as fast as you like but any rom with bootloaders
Sent from my GT-I9000 using XDA Premium App
kezgez said:
Just downloading JP6 now from samfirmwares what is the best way to root this please so i can flash speedmod
Click to expand...
Click to collapse
flash speedmod through odin, no need for any other tools as speedmod kernel has root option

[Q] Phone not booting up!

Hello..
I was on cm7 nightly rom. I wanted to switch to Juwe's rom because of camera.
I formatted my system and did a factory reset and flashed to JVQ rom via ODIN.
Flashed speedMod kernal.
Then booted into recovery mode and formated cache and did a factory reset and then flashed juwe's rom via CWM.
after I rebooted , I got stuck on Galaxy S logo!!
I tried to flash many times(By flashing to stock via ODIN and then trying to flash juwe's via CWM) and also tried Simplicity rom... It just gets stuck on that galaxy S logo!
Help!
Did you re-partion when flashing stock samsung firmware. CM7 and samsung based firmware have different file systems.
Sent from my GT-I9000 using XDA App
Yeah... I did re-partition while flashing stock rom.
Try flashing stock jvr via Odin 1.3!
Sent from my sgs
kernel: galaxian
Rom: jetpack
If you are still stuck try either the froyo or the gingerbread ezbase rom, both good recovery roms flash with ezodin, all files and instructions found in ezbase thread over at dev
Sent from my GT-I9000 using xda premium
What was the original problem with the camera?
Wrong thread
Sent from my GT-I9000 using xda premium
slaphead20 said:
If you are still stuck try either the froyo or the gingerbread ezbase rom, both good recovery roms flash with ezodin, all files and instructions found in ezbase thread over at dev
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Its working after I flashed EZbase froyo..
saba_rish91 said:
Its working after I flashed EZbase froyo..
Click to expand...
Click to collapse
glad it worked, i use it as my stock recovery if all else fails...all praise to nitr8...its creator!

[Q][HELP!!!]How can I bring my phone back to life if it only accesses download mode?

There's a problem that I've came on while downgrading to stock 2.3.3 from MIUI 1.11.11 2.3.7 with CWM. I've wiped partillion chache and dalvik chache, installed rom XWJVH (it went correctly) rebooted, it stuck on booting screen. Restarted into download mode tried to install another kernel (cf-root 3.2 because it worked in past) and got fail in Odin.
Is my phone fully bricked? 'Cuz I can't get into CWM anymore.
HELP PLEASE!!!!!!!!
If u can get into download mode, you will be fine. Just flash a full stock rom with odin.
If u still have no joy, flash eclair jm9 (from samfirmware.com), it will resurrect most fxxk ups.
Sent from my GT-I9000 using xda premium
woolf clubs said:
If u can get into download mode, you will be fine. Just flash a full stock rom with odin.
If u still have no joy, flash eclair jm9 (from samfirmware.com), it will resurrect most fxxk ups.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Ok, let's try but on other combinations Odin said connecting after starting a process (tried 1.3, 1.7, 1.8 versions to flash 2.3.3 and 2.3.5, none worked) but whar if it will not work? What next, because on recovery it gives "black screen of death" as said in this topic:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Series
But at least download mode works.
P.S. I get modem and code files in jm9 download, which to put in pda? csc?
Is odin detecting your phone, yellow light?
Sent from my GT-I9000 using xda premium
yes it detected.
AND YES its going now, I've put pit file in and it is working now!!!!!!!
PASSED in odin, booting up........ boot logo......... please boot up!
something wrong, boot logo loop.
flashed cf-root 4.3 and I hope for the best.
P.S. nooooooooo, boot loop again
P.P.S. thank you anyway, at least boot loop is easier to work on.
Have you tried jm9 yet?
Sent from my GT-I9000 using xda premium
Taxiozaurus said:
flashed cf-root 4.3 and I hope for the best.
P.S. nooooooooo, boot loop again
P.P.S. thank you anyway, at least boot loop is easier to work on.
Click to expand...
Click to collapse
I am a little bit confused, and you too...
To bring back to life your phone you have flashed jm9, eclaire....ok.
But why have you flashed a CF-root 4.3?
It's for JVS gingerbread rom.
Edit: If your 3 keys combo still works, try to flash a stock 2.3.x
If the problems happen while using MIUI, better you select eclair rom first. Then you can upgrade to GB that have bootloader.
From MIUI directly to gingerbread will have fuzzy screen problem.

[Q] Bootlooping Problem in Galaxy S I9000

Hi,
I have a problem when trying to flash my galaxy s and install ICS Dark night v5.5.
When I try updating the kernel using ODIN, my phone gets into bootloop.
It is a froyo installed phone. Also, I am unable to get recovery mode. It enters download mode though.
Can anyone help me out in this??? I am very new to this stuff... I am a beginner...
Held up in this for a couple of weeks.....
Thanks,
Sridhar
If you can boot into download mode, use ODIN to flash a stable rom, then get CWM and your back to where you were, hold off the nightly builds or post in the Cyanogenmod official thread or forums.
Thanks a lot... That did work.. But now i have got Mobile network not available error after flashing.....
Probably best to mention which version of software you are using and the source...
Best option is to flash stock gingerbread version via Odin.
www . theandroidsoul . com / xxjvu /
sorry can't put correct address in yet dont have enough thanks...
it would be better to update to any stable stock rom, go to sammobile.com...
i suggest you update to the latest firmware or ics stock rom for i9000 via odin then root that firmware you have chosen(CF-ROOT) and then update the custom rom darknight v5.5 via cwm...
I think you need gingerbread bootloaders for ics.. You were on Froyo, so it won't work.. You'll need to install a stock gingerbread rom with the pit file and repartition.. After that you can try an ics rom..
I found this thread. After attempting to get CM9 onto my S it wouldn't boot so I used odin to install a stock from from sammobile but now the phone just boot loops.
Could someone please help me.
More info:
After the odin flash - I get a screen like the recovery menu saying things such as "E:Format_volume:rfs format failed on /dev/block/stl10" and things of a similar nature - will have to see what the others say.
Any ideas?
You probably flashed a rom without bootloaders. Try flashing a 3 file rom from here and repartition with 512 pit.
http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Thank you. Will try that tonight
Sent from my GT-I9000 using XDA
vanisleryan said:
You probably flashed a rom without bootloaders. Try flashing a 3 file rom from here and repartition with 512 pit.
http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Click to expand...
Click to collapse
Thank you sooooo much that worked an absolute treat.
Sent from my GT-I9000 using XDA

[Q] Rogers Captivate stuck in bootloop, Please Help

I was trying to install CM10 onto the device, i followed the instructions on the CM Mod wiki.
But after i flashed the hemidall kernel with
heimdall flash --kernel zImage --no-reboot
My phone is now stuck in a bootloop and everytime I tried to start it it just loop I896 Samsung screen over and over.
I can still enter download mode, but I have no idea how to get out of this loop.
Please i need help
ncdecay said:
I was trying to install CM10 onto the device, i followed the instructions on the CM Mod wiki.
But after i flashed the hemidall kernel with
heimdall flash --kernel zImage --no-reboot
My phone is now stuck in a bootloop and everytime I tried to start it it just loop I896 Samsung screen over and over.
I can still enter download mode, but I have no idea how to get out of this loop.
Please i need help
Click to expand...
Click to collapse
If you already have the GB bootloaders, flash Odin KK4 without bootloaders.
If you were on Froyo or Eclair prior to flashing the kernel image, flash Odin KK4 with bootloaders.
From there, follow this guide to root and get a cwm recovery.
P.S.: You'll have to use a different usb port than the one you used Heimdall on as it installs it's own drivers and Odin won't work on it.
BWolf56 said:
If you already have the GB bootloaders, flash Odin KK4 without bootloaders.
If you were on Froyo or Eclair prior to flashing the kernel image, flash Odin KK4 with bootloaders.
From there, follow this guide to root and get a cwm recovery.
P.S.: You'll have to use a different usb port than the one you used Heimdall on as it installs it's own drivers and Odin won't work on it.
Click to expand...
Click to collapse
hello there, i tried to use the odin on flash and use it on a new usb port, but it does not recognize my device. what do i do now?
the driver is gadget serial if that helps
ncdecay said:
the driver is gadget serial if that helps
Click to expand...
Click to collapse
have you tried installing the drivers??
Id suggest you search for the hemidal stock Rom and try to flash with a different port. Back to stock Rom and start over again. It happened to me and I don't partically like Odin a lot, I prefer hemidall more
Sent from my SGH-I897 using xda app-developers app
n205des said:
have you tried installing the drivers??
Click to expand...
Click to collapse
yeah i did, but now it doesnt even show up under the devices, and still wont be recognized by odin
uninstall drivers for anything else you run or have ever run on the usb ports
reboot pc, then install the drivers you need
androidfine16 said:
Id suggest you search for the hemidal stock Rom and try to flash with a different port. Back to stock Rom and start over again. It happened to me and I don't partically like Odin a lot, I prefer hemidall more
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
hey man, thank you so much, i downloaded the stock rom for heimdall, and it recognized it, and i flashed everything and it worked!! thx bro!
ncdecay said:
hey man, thank you so much, i downloaded the stock rom for heimdall, and it recognized it, and i flashed everything and it worked!! thx bro!
Click to expand...
Click to collapse
Your welcome
Sent from my SGH-I897 using xda app-developers app

Categories

Resources