Hello..
I was on cm7 nightly rom. I wanted to switch to Juwe's rom because of camera.
I formatted my system and did a factory reset and flashed to JVQ rom via ODIN.
Flashed speedMod kernal.
Then booted into recovery mode and formated cache and did a factory reset and then flashed juwe's rom via CWM.
after I rebooted , I got stuck on Galaxy S logo!!
I tried to flash many times(By flashing to stock via ODIN and then trying to flash juwe's via CWM) and also tried Simplicity rom... It just gets stuck on that galaxy S logo!
Help!
Did you re-partion when flashing stock samsung firmware. CM7 and samsung based firmware have different file systems.
Sent from my GT-I9000 using XDA App
Yeah... I did re-partition while flashing stock rom.
Try flashing stock jvr via Odin 1.3!
Sent from my sgs
kernel: galaxian
Rom: jetpack
If you are still stuck try either the froyo or the gingerbread ezbase rom, both good recovery roms flash with ezodin, all files and instructions found in ezbase thread over at dev
Sent from my GT-I9000 using xda premium
What was the original problem with the camera?
Wrong thread
Sent from my GT-I9000 using xda premium
slaphead20 said:
If you are still stuck try either the froyo or the gingerbread ezbase rom, both good recovery roms flash with ezodin, all files and instructions found in ezbase thread over at dev
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Its working after I flashed EZbase froyo..
saba_rish91 said:
Its working after I flashed EZbase froyo..
Click to expand...
Click to collapse
glad it worked, i use it as my stock recovery if all else fails...all praise to nitr8...its creator!
Related
Odin gets stuck when trying to flash JV1....
Gladly I can still use download mode so I'm able to restore my galaxy s....
But I really want to install gingerbread... any ideas on how to install it?
I uploaded an image of the part where the flashing gets stuck... in the image iim using pit 512 but I have also tried with 803 and I get the same result... after odin fails I can disconnect my galaxy s... and boot into download mode again
Have you tried to download odin 1.3 maybe this one is corrupted. Try to restart pc, run odin, put all files, connect the device.
Sent from my GT-I9000 using XDA App
I 've had the same problem. Flash with Odin 1.3 should work.
I tried with odin 1.3 too...
And it didn't work either =/
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
renatofontes said:
I tried with odin 1.3 too...
And it didn't work either =/
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
themate1987 said:
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i am on darkeys 9.3 now how can i flash ultibread 1.4 pl guide me step by step
I will PM when i get home
naishadh said:
i am on darkeys 9.3 now how can i flash ultibread 1.4 pl guide me step by step
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
themate1987 said:
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Sadly that didn't work either... D:
I'm downloading the JV1 rom directly from samfirmware and if ir doesn't work again I'll try flashing from another computer =)
Well now that JVK has been released I tried flashing that too...
And I can't
It's really weird the bootloaders just don't seem to want to get into my phone x3
I tried using odin and heimdall using the version with the safe bootloaders and it never flashed completely.
Gladly my phone hasn't been bricked... maybe it's because odin and heimdall don't ever get close to flashing the bootloader?
Anyway... I have a mexican galaxy s... I think the name of the model is I9000T
Can someone help?
There's a problem that I've came on while downgrading to stock 2.3.3 from MIUI 1.11.11 2.3.7 with CWM. I've wiped partillion chache and dalvik chache, installed rom XWJVH (it went correctly) rebooted, it stuck on booting screen. Restarted into download mode tried to install another kernel (cf-root 3.2 because it worked in past) and got fail in Odin.
Is my phone fully bricked? 'Cuz I can't get into CWM anymore.
HELP PLEASE!!!!!!!!
If u can get into download mode, you will be fine. Just flash a full stock rom with odin.
If u still have no joy, flash eclair jm9 (from samfirmware.com), it will resurrect most fxxk ups.
Sent from my GT-I9000 using xda premium
woolf clubs said:
If u can get into download mode, you will be fine. Just flash a full stock rom with odin.
If u still have no joy, flash eclair jm9 (from samfirmware.com), it will resurrect most fxxk ups.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Ok, let's try but on other combinations Odin said connecting after starting a process (tried 1.3, 1.7, 1.8 versions to flash 2.3.3 and 2.3.5, none worked) but whar if it will not work? What next, because on recovery it gives "black screen of death" as said in this topic:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Series
But at least download mode works.
P.S. I get modem and code files in jm9 download, which to put in pda? csc?
Is odin detecting your phone, yellow light?
Sent from my GT-I9000 using xda premium
yes it detected.
AND YES its going now, I've put pit file in and it is working now!!!!!!!
PASSED in odin, booting up........ boot logo......... please boot up!
something wrong, boot logo loop.
flashed cf-root 4.3 and I hope for the best.
P.S. nooooooooo, boot loop again
P.P.S. thank you anyway, at least boot loop is easier to work on.
Have you tried jm9 yet?
Sent from my GT-I9000 using xda premium
Taxiozaurus said:
flashed cf-root 4.3 and I hope for the best.
P.S. nooooooooo, boot loop again
P.P.S. thank you anyway, at least boot loop is easier to work on.
Click to expand...
Click to collapse
I am a little bit confused, and you too...
To bring back to life your phone you have flashed jm9, eclaire....ok.
But why have you flashed a CF-root 4.3?
It's for JVS gingerbread rom.
Edit: If your 3 keys combo still works, try to flash a stock 2.3.x
If the problems happen while using MIUI, better you select eclair rom first. Then you can upgrade to GB that have bootloader.
From MIUI directly to gingerbread will have fuzzy screen problem.
Can someone please help me find the stock UGKG3 kernel for a GT-i9000M running Gingerbread 2.3.3?
I used Odin to flash the latest SpeedMod kernel to get CWM Recovery on my phone and now it's stuck in a logo boot loop.
I need the stock UGKG3 2.3.3 kernel but can't seem to find it anywhere.
http://forum.xda-developers.com/showthread.php?t=1211939
dlockhart said:
http://forum.xda-developers.com/showthread.php?t=1211939
Click to expand...
Click to collapse
I found the rooted stock kernel in this post but even after I flash that with ODIN I'm stuck on the boot logo. I had flashed SpeedMod, and then Voodoo and both had me stuck in boot loop. After flashing the stock rooted KG3 kernel I'm just stuck at the boot logo, i.e. no loop.
Go into recovery and do a full wipe before and after flash
Sent from my GT-I9000 using xda premium
Also, what were you on originally. 2.2, 2.3?
Sent from my GT-I9000 using xda premium
dlockhart said:
Also, what were you on originally. 2.2, 2.3?
Click to expand...
Click to collapse
I was on stock 2.3.3, bought the phone used so I don't know how the previous user had updated to 2.3.3
In any case, this is a non-issue now because I was able to use CWM recovery that came with the Voodoo kernel to flash ICSSGS which was my ultimate goal anyway. I don't see myself ever going back to stock Gingerbread.
Thanks for the help!
Hi,
I have a problem when trying to flash my galaxy s and install ICS Dark night v5.5.
When I try updating the kernel using ODIN, my phone gets into bootloop.
It is a froyo installed phone. Also, I am unable to get recovery mode. It enters download mode though.
Can anyone help me out in this??? I am very new to this stuff... I am a beginner...
Held up in this for a couple of weeks.....
Thanks,
Sridhar
If you can boot into download mode, use ODIN to flash a stable rom, then get CWM and your back to where you were, hold off the nightly builds or post in the Cyanogenmod official thread or forums.
Thanks a lot... That did work.. But now i have got Mobile network not available error after flashing.....
Probably best to mention which version of software you are using and the source...
Best option is to flash stock gingerbread version via Odin.
www . theandroidsoul . com / xxjvu /
sorry can't put correct address in yet dont have enough thanks...
it would be better to update to any stable stock rom, go to sammobile.com...
i suggest you update to the latest firmware or ics stock rom for i9000 via odin then root that firmware you have chosen(CF-ROOT) and then update the custom rom darknight v5.5 via cwm...
I think you need gingerbread bootloaders for ics.. You were on Froyo, so it won't work.. You'll need to install a stock gingerbread rom with the pit file and repartition.. After that you can try an ics rom..
I found this thread. After attempting to get CM9 onto my S it wouldn't boot so I used odin to install a stock from from sammobile but now the phone just boot loops.
Could someone please help me.
More info:
After the odin flash - I get a screen like the recovery menu saying things such as "E:Format_volume:rfs format failed on /dev/block/stl10" and things of a similar nature - will have to see what the others say.
Any ideas?
You probably flashed a rom without bootloaders. Try flashing a 3 file rom from here and repartition with 512 pit.
http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Thank you. Will try that tonight
Sent from my GT-I9000 using XDA
vanisleryan said:
You probably flashed a rom without bootloaders. Try flashing a 3 file rom from here and repartition with 512 pit.
http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Click to expand...
Click to collapse
Thank you sooooo much that worked an absolute treat.
Sent from my GT-I9000 using XDA
Hi,
I installed Jellybeer rom, and then the hydracore kernel..
Then i got the samsung note screen but nothing else..
I then followed another tut to revive it..
I flashed an odin rom (GB) but now it bootloops..
Anny suggestions?
yes.. boot into recovery and do a data factory reset and then restart
Sent from my GT-N7000 using xda premium
That kinda solved the problem ..
Thx!
Now i'm flashing a pre rooted GB rom with odin..
Then just go in CMW & flash an ICS rom?
Or first flash a safe kernel?
Gb has safe kernel, so get rooted, then use mobile odin to flash ics retaining root, then you'll need to flash a safe kernel once on ics such as hydracore or philz
Sent from my GT-N7000 using xda premium
timmeke154 said:
Hi,
I installed Jellybeer rom, and then the hydracore kernel..
Then i got the samsung note screen but nothing else..
I then followed another tut to revive it..
I flashed an odin rom (GB) but now it bootloops..
Anny suggestions?
Click to expand...
Click to collapse
You didn't get bricked at all, you just flashed an incompatible kernel on JellyBeer Rom. HC uses different Mali from Jelly.
All you had to do at that point was to reflash JellyBeer and reboot, and all would be well.