Bricked.. - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi,
I installed Jellybeer rom, and then the hydracore kernel..
Then i got the samsung note screen but nothing else..
I then followed another tut to revive it..
I flashed an odin rom (GB) but now it bootloops..
Anny suggestions?

yes.. boot into recovery and do a data factory reset and then restart
Sent from my GT-N7000 using xda premium

That kinda solved the problem ..
Thx!
Now i'm flashing a pre rooted GB rom with odin..
Then just go in CMW & flash an ICS rom?
Or first flash a safe kernel?

Gb has safe kernel, so get rooted, then use mobile odin to flash ics retaining root, then you'll need to flash a safe kernel once on ics such as hydracore or philz
Sent from my GT-N7000 using xda premium

timmeke154 said:
Hi,
I installed Jellybeer rom, and then the hydracore kernel..
Then i got the samsung note screen but nothing else..
I then followed another tut to revive it..
I flashed an odin rom (GB) but now it bootloops..
Anny suggestions?
Click to expand...
Click to collapse
You didn't get bricked at all, you just flashed an incompatible kernel on JellyBeer Rom. HC uses different Mali from Jelly.
All you had to do at that point was to reflash JellyBeer and reboot, and all would be well.

Related

[Q] Phone not booting up!

Hello..
I was on cm7 nightly rom. I wanted to switch to Juwe's rom because of camera.
I formatted my system and did a factory reset and flashed to JVQ rom via ODIN.
Flashed speedMod kernal.
Then booted into recovery mode and formated cache and did a factory reset and then flashed juwe's rom via CWM.
after I rebooted , I got stuck on Galaxy S logo!!
I tried to flash many times(By flashing to stock via ODIN and then trying to flash juwe's via CWM) and also tried Simplicity rom... It just gets stuck on that galaxy S logo!
Help!
Did you re-partion when flashing stock samsung firmware. CM7 and samsung based firmware have different file systems.
Sent from my GT-I9000 using XDA App
Yeah... I did re-partition while flashing stock rom.
Try flashing stock jvr via Odin 1.3!
Sent from my sgs
kernel: galaxian
Rom: jetpack
If you are still stuck try either the froyo or the gingerbread ezbase rom, both good recovery roms flash with ezodin, all files and instructions found in ezbase thread over at dev
Sent from my GT-I9000 using xda premium
What was the original problem with the camera?
Wrong thread
Sent from my GT-I9000 using xda premium
slaphead20 said:
If you are still stuck try either the froyo or the gingerbread ezbase rom, both good recovery roms flash with ezodin, all files and instructions found in ezbase thread over at dev
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Its working after I flashed EZbase froyo..
saba_rish91 said:
Its working after I flashed EZbase froyo..
Click to expand...
Click to collapse
glad it worked, i use it as my stock recovery if all else fails...all praise to nitr8...its creator!

[BOOT LOOP] Flashed LPY From Stock GB

Hi Guys
I seem to be stuck in a bootloop.
I tried flashing the latest GERMAN ICS (LPY) usind Dr.Ketans Guide. I Used Mobile ODIN PRO.
What seems to happen now, is when I turn on the phone it loops from the Samsung Splash Screen to a short burst of mobile odin/chain fire (Blue Android in background)
I'm not sure how to proceed, since my home button doesnot work too..
Any help would be appreciated
PS: I was rooted running STOCK gingerbread.
why LPY ,,,
why wud u do that after everyone is facing issues with LPY man!!!
gurnishdhillon said:
why wud u do that after everyone is facing issues with LPY man!!!
Click to expand...
Click to collapse
Guess I was curious.... Wrong move I suppose
zakdoc89 said:
Guess I was curious.... Wrong move I suppose
Click to expand...
Click to collapse
wrong indeed brother...
Ummm ,,,not sure what to tell u man,,,,u need to consult the experts now since u cannot/shouldnot go into recovery at all ...
Ok fixed....
Got into download mode
Used pc odin to flash LPY only..
Works ok now
Sent from my GT-N7000 using Tapatalk 2
zakdoc89 said:
Ok fixed....
Got into download mode
Used pc odin to flash LPY only..
Works ok now
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
you're lucky. but i wondered why that happened to your note. i also flashed lpy and cf-root kernel from GB using mobile odin pro but it was successful. yesterday i did a full wipe and format the internal storage and now my note is super smooth and the battery lasts more than before (GB).
ayongkot said:
you're lucky. but i wondered why that happened to your note. i also flashed lpy and cf-root kernel from GB using mobile odin pro but it was successful. yesterday i did a full wipe and format the internal storage and now my note is super smooth and the battery lasts more than before (GB).
Click to expand...
Click to collapse
Not going to do factory reset.... Till I know the kernal wont mess it up..
Sent from my GT-N7000 using Tapatalk 2
ayongkot said:
you're lucky. but i wondered why that happened to your note. i also flashed lpy and cf-root kernel from GB using mobile odin pro but it was successful. yesterday i did a full wipe and format the internal storage and now my note is super smooth and the battery lasts more than before (GB).
Click to expand...
Click to collapse
STOP TELLING PEOPLE TO WIPE on affected kernels. Damn..
Sent from my GT-N7000 using XDA
You can do a full wipe but only after flashing Abyss kernel under CWM.
Sent from my GT-N7000 using Tapatalk 2
musashiro said:
STOP TELLING PEOPLE TO WIPE on affected kernels. Damn..
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
He didn't tell anyone to wipe on an affected kernel. He only said he did it himself.
Sent from my GT-N7000 using Tapatalk
zakdoc89 said:
Hi Guys
I seem to be stuck in a bootloop.
I tried flashing the latest GERMAN ICS (LPY) usind Dr.Ketans Guide. I Used Mobile ODIN PRO.
What seems to happen now, is when I turn on the phone it loops from the Samsung Splash Screen to a short burst of mobile odin/chain fire (Blue Android in background)
I'm not sure how to proceed, since my home button doesnot work too..
Any help would be appreciated
PS: I was rooted running STOCK gingerbread.
Click to expand...
Click to collapse
Please help me! i flashed rocketics rom v1 from rooted GB rom and now my phone keeps rebooting after every 15 secs. I have tried to do a full wipe and reboot but it doesnt help. I heard from experts that now i have to install and root LPY stock rom. Please tell me how to install and root LPY stock rom! please.
myemintun said:
Please help me! i flashed rocketics rom v1 from rooted GB rom and now my phone keeps rebooting after every 15 secs. I have tried to do a full wipe and reboot but it doesnt help. I heard from experts that now i have to install and root LPY stock rom. Please tell me how to install and root LPY stock rom! please.
Click to expand...
Click to collapse
What are you using to flash the roms? CWM, mobile odin, PC Odin or Kies?
Sent from my GT-N7000 using Tapatalk 2
zakdoc89 said:
What are you using to flash the roms? CWM, mobile odin, PC Odin or Kies?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
i have been using CWM to flash the rom. But i rooted my note with PC odin. thank you!
myemintun said:
i have been using CWM to flash the rom. But i rooted my note with PC odin. thank you!
Click to expand...
Click to collapse
Ok I would suggest to try PC Odin to flash the Rom.
And maybe just STAY away from LPY at the moment, unless its absolutly necessary. I flashed my note with LPY and regret it since I have NO root, and am afraid to copy any large files to the storage.. Due to the kernal issues.
If you do decide to flash LPY make sure its through PC Odin and you dont do a wipe.
Can you get your Note into download mode?
Sent from my GT-N7000 using Tapatalk 2
This is how i did it:
Flashed LPY with odin PC (untick auto reboot)
Flashed CF-root with PC odin (untick auto reboot)
Booted into CWM and flashed franco r3 that i had on my sdcard
Reboot phone again in CWM on franco's kernel and then wipe/factory reset.
Running LPY like a boss!
SquirtingCherry said:
This is how i did it:
Flashed LPY with odin PC (untick auto reboot)
Flashed CF-root with PC odin (untick auto reboot)
Booted into CWM and flashed franco r3 that i had on my sdcard
Reboot phone again in CWM on franco's kernel and then wipe/factory reset.
Running LPY like a boss!
Click to expand...
Click to collapse
But tell me... isn't the CF root kernel affected... ?
Sent from my Nexus One using Tapatalk 2
zakdoc89 said:
But tell me... isn't the CF root kernel affected... ?
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
Yes CF-root kernel is affected, but i think its no problem to flash franco with it because you wont touch the factory reset/wipe.
I'm not 100% sure if flashing a kernel on cf-root kernel uses the MMC_CAP_ERASE command.
SquirtingCherry said:
Yes CF-root kernel is affected, but i think its no problem to flash franco with it because you wont touch the factory reset/wipe.
I'm not 100% sure if flashing a kernel on cf-root kernel uses the MMC_CAP_ERASE command.
Click to expand...
Click to collapse
So what would you suggest? I'm on Stock LPY.. I obviously want root... Flash franco and root?
Sent from my GT-N7000 using Tapatalk 2
i was on stock unrooted GB and flashed the official german LPY the day it was released via pc ODIN (before the warnings came about), everything is fine uptill now, i dont plan on rooting or using any sort of rom... am i in the clear or should i be worried???
---------- Post added at 09:58 PM ---------- Previous post was at 09:47 PM ----------
what i mean is am i ok for now? or should i roll back to GB, also, as i am on the official german ICS and unrooted, will i get future official OTA updates??
bump!!! anyone?

How to safely upgrade to ICS

Hi guys
Just wondering how I should upgrade my note to ICS?
I am currently on the stock AUS GB rom with Hardcore's speedmod kernel k2 12 I have been waiting a while to do the upgrade as I'm a little scared to flash since I heard of the bricking bug. I have downloaded the got brick bug app from chainfire post and i do have the bricking bug hardware in my gnote
I have also put off the upgrade as I haven't found a stock AUS ICS rom that is available from sam firmwares or the stock rom post by dr ketan.
I phoned Vodafone today to ask if they have released ICS for the samsung galaxy note and they told me that they have, so any ideas on what I should do?
mattybxda said:
Hi guys
Just wondering how I should upgrade my note to ICS?
I am currently on the stock AUS GB rom with Hardcore's speedmod kernel k2 12 I have been waiting a while to do the upgrade as I'm a little scared to flash since I heard of the bricking bug. I have downloaded the got brick bug app from chainfire post and i do have the bricking bug hardware in my gnote
I have also put off the upgrade as I haven't found a stock AUS ICS rom that is available from sam firmwares or the stock rom post by dr ketan.
I phoned Vodafone today to ask if they have released ICS for the samsung galaxy note and they told me that they have, so any ideas on what I should do?
Click to expand...
Click to collapse
download your preferred ics rom, (I prefer kingdroid 4.4 with speedmod k3-7 kernel combo)
put the rom and the kernel to your sd card.
So you are on gb rom with speedmod. go to recovery, flash jbdroid kernel cleaning script after that do a factry reset ( you do no need to wipecaceh and dalvik coz' jbdroid kernel cleaning scrip does it )
afeter facory reset install the rom, install jbdroid kernel cleaning script and install the preferred ics kernel and reboot.
while you are on ics and want to wipe I HIGHLY prefer to you flash abyss 4.2 touch recovery and wipe there!!!
Flash your ics rom from PC Odin and never ever wipe data /factory reset
If u follow the instructions right then u face no problems
Sent from my GT-N7000 using xda premium
hi danteoo7 I also read the same information on another thread about never wiping data which a reason why I posted this :|. So why should I download the ICS rom and use pc odin over a recovery or mobile odin?
Refer to this thread
Refer to this thread:
http://forum.xda-developers.com/showthread.php?t=1763151
Because Samsung stock rom kernel have emmc brick bug problem which can brick your mobile and its a hard brick not recoverable by jig ...
And PC Odin is always safer than mobile Odin ..
Sent from my GT-N7000 using xda premium

[Q:] Need Bootloader file for ODIN

i Have Brike my Galaxy Note GT7000.
i see only the Boot Logo.
Via ODIN i am able to install the Stock Roms,
But this do not Fix the Boot Loop Problem.
i see in ODIN the Option "Phone Bootloader update"
can somebody send me a Bootloader file for any Stock ROM ICS or GB ?
or have anyone a other idea ? its my first Brike, so please help
After flashing have you wiped cache and data?
Sent from my GT-N7000 using xda app-developers app
Yes, but zu 99% the Wipe process hangs also up to 10 min, than the phone makes a restart.
When you flash a stock ROM via pc odin, does it complete successfully? If you're on stock ics, flash hydracore kernel via pc odin, then try to boot. Sounds like it's a corrupt kernel installation.
Sent from my GT-N7000 using xda app-developers app
SpyderTracks said:
When you flash a stock ROM via pc odin, does it complete successfully? If you're on stock ics, flash hydracore kernel via pc odin, then try to boot. Sounds like it's a corrupt kernel installation.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Its the same,
i have flash the Stock ICS via ODIN, and after this i have Flash the HydraCore v5.1
its the same, (now the Galaxy Note Logo has the Triangle to)
try flashing back to stock GB and see if you can bootup your Note after. Usually corrupted bootloaders are fix when you flash back a stock ROM on it...if stock ICS does not work.. then try flashing your phone back to Stock GB.
After installing hydracore... Try do a wipe cache dalvik and factory reset.
Sent from my GT-N7000 using xda premium
---------- Post added at 04:09 AM ---------- Previous post was at 04:09 AM ----------
Yellow triangle can be removed by triangle away
Sent from my GT-N7000 using xda premium
letters_to_cleo said:
try flashing back to stock GB and see if you can bootup your Note after. Usually corrupted bootloaders are fix when you flash back a stock ROM on it...if stock ICS does not work.. then try flashing your phone back to Stock GB.
Click to expand...
Click to collapse
I have try a Stock GB via ODIN, but its still the same
for what is the PhoneBootloader Update in ODIN, exist any Firmware for this ?
India KL3 having bootloader.(that's why i prefer it all time)
wipe cache and data after flashing said ROM.

[Q] How to flash Hydracore via PC Odin

Hello guys,
So I just downloaded the leaked official JB ROM for my N7000 and flashed it successfully via Odin (I came from the latest CM10 Nightly build).
After that I wanted to flash the latest Hydracore to have my phone rooted, but apparently it comes in .zip format only.
Since I'm not rooted and I don't have CWM now, how can I get to flash Hydracore via PC Odin?
Hope someone has the answer for this, as the internet is just full of bullocks all websites are describing the same non working procedure....
Thanks all
//M
Sent from my GT-P6800 using xda app-developers app
latest jb leak does not work with hydracore. If you want to root use philz kernel zip file and install using stock recovery.
Sent from my GT-N7000 using xda premium
Thanks much
will do so... I already flashed Hydracore and now I'm stuck @ Samsung's logo
Hopefully I won't face such issues again
Sent from my GT-P6800 using xda app-developers app
Well, I've downloaded both v3.65 .zip files (XXLSA and XXLS7) and tried flashing them through CWM which was already on the device.
After rebooting either, it goes into a black screen after the initial boot screen (Galaxy Note GT-N7000).
Bear in mind I had already flashed Hydracore before that...
Any helpers as to what I'm doing wrong?
Should I reflash the stock ROM via PC Odin then flash Philz kernel via stock recovery?
Thanks in advance
P.S. I know I messed up big time
As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.
antique_sonic said:
As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.
Click to expand...
Click to collapse
That's what I'm thinking and doing now, wish me luck
I've also downloaded xxlsa to have 4.1.2 .. according to online tutorials I should flash cf-root via odin, then flash the rom via CWM .. any thoughts?
[Update - 1] phone is ok, re-flashed the stock firmware via PC Odin and it is working now, no problem! tried flashing cf-root, got stuck at the yellow triangle screen and nothing happens ... so I reflashed the stock rom again.
will try now to flash cf-root then boot into recovery, i just might be lucky
[Update - 2] upgraded to JB 4.1.2 successfully and rooted!
So which kernel are you using? and which Jelly bean?

Categories

Resources