Database Develop

Unable to flash Anything else

i have done quite a few searches on this and yet have found nothing so i hope i dont get reamed for posting this.
if someone has a link for this answer id be very thankful.
if not then PLEASE SOMEONE EXPLAIN!!!!!!!
at the moment i am running drizzy hero rom. to do the update i did use the one touch root. on a second phone i did it manually. on both i added the hard spl and am running the RA v 1.2.1 recovery. I liked this ROM and wanted to see what bugs it had. after a few days i wanted to switch and try a different ROM I have dl most of the ROMs available and already have them on my sdcard once i did this no ROM would load except for Drizzy(new Vision v2.8). after trying a few things and accomplishing nothing i decided to redo EVERYTHING. unrooted my phone rooted again applied recovery made sure radio was to date and spl. and still nothing i cant even run the original jf1.5 that i was using before deciding to port. this issue is occuring on both phones. 1st phone was again done with one step root and the 2nd phone was done completly manually. I REALLY REALLY REALLY want to try these other roms SO PLEASE SOMEONE HELP. if you need more information on what i did with these phones ill gladly tell you step by step on what i did.
sorry for that.
I was using my G1 and also had a friends. On my g1 i used the one step root. I used the Instructions from The Unlocker.com. It uses flashrec.apk and also Amon Ra's recovery image. After that i went over to the How to Load a Custom ROM. same site. It asks you to check the Radio and the Spl. The radio is 2.22.19.26I and the spl used was the HARDSPL 1.33.2005.
Once i finished that i went and formated the sdcard to Fat32+Ext2+LinuxSwap also converted Ext2 to Ext3.Then I did-Move Dalvik Cache to SD. last 3 steps to speed up hero. after all of that I loaded 4 ROMS CyanogenMod ROM, jACXHeroSkiv Hero ROM v1.8, Drizzy’s NewVision TouchFlo ROM, and JF v1.5 Cupcake ROM. I have only flashed Drizzy's until last night.
I was unable to flash any other one and when i flashed back to drizzy I had problems loading it back but eventually loaded fully the issue was running the startup wizard it kept crashing. after a reboot it was ok.

Give us step by step on what you did and USE PARAGRAPHS
that whole thing looked like mumbo jumbo to me
put new lines where they belong to help separate out the steps you took

FIXED! thanks!

hobbitton said:
FIXED! thanks!
Click to expand...
Click to collapse
did you do a data wipe? you need to wipe going from hero to cupcake/donut

When I first did all of that I did. Am I supposed to data wipe everytime I switch the Rom?

hobbitton said:
When I first did all of that I did. Am I supposed to data wipe everytime I switch the Rom?
Click to expand...
Click to collapse
when your using hero rom's, yes.
if your upgrading cupcake roms (ie cyan 4.0.4 to 4.1.9.2 ), no
If its not working, WIPE
you cant go from hero to cupcake without wiping and not expect a lot of problems. they cause too many issues.
hero roms use the data partition differently

also remember to wipe /system/sd/ to clear all of that out. pull your /system/sd/ to your computer first though

thanks you guys it helped alot

I need some help please

I've been on XDA today for atleast 3 hours and havent gotten anywhere, I have owned my G1 since dec. 08, rooted it, and kept the firmware at 1.1. I have jesus freak recovery 1.41.
Like I said, I've been on XDA forums for 3 hours already and haven't had any clarity what so ever and am just frustrated right now. Without being 100% I managed to upgrade to 1.6 withy cyanogen 4.2.15.1 I lost everything that was on my phone, it hurts but I'm just frustrated to the point right now that the phone is functioning slower than before and theres lag between the screens and functions. With the upgrade, all of the phones original fucntions "contacts, alarm clock, calculator, etc." force closed and nothing worked, i tried to factory reset and because of the stupid sync issue from the begining skrewed me and about half of my info saved to my google account. I'm so frustrated right now.
I need to know how to install the newest recovery to hopefully work with Nand because I had to Manually rename the DRC83_base_defanged to update.zip and then had to manually rename update-cm-4.2.15.1-signed to update.zip to install each one at a time without having the ability to freely choose what zip i wanted to install.
I haven't been able to find what issues there are with using another phones firmware on the G1, i've seen the Hero firmware, the home screen looks gorgeous and runs like a dream, but I haven't been able to find anything saying that it is okay or a BAD idea to attempt to install it, also I havent been able to find any info on finding the newest g1 firmware or any mods to be able to make the g1 firmware look like the hero, or any other android platforms. I have just found constant cooked firmware after firmware with a hard time decyphering why one may be better than the other. If someone could help me, I would GREATLY appreciate it.
I continute to run into threads "how to root" or "down load this, and download this, and assuming you have something with options you dont have, make it work like this"
Please someone help.

First you need to upgrade your recovery b/c the one you have is very very Ancient with a capital A....You have to wipe before you flash the defanged then flash cyan w/o rebooting.

I want to upgrade my recovery, but I haven't found anything that can help me upgrade the thing. any links to tell me how to do it? and is there no order that I have to install the firmware? instead of having to go from 1.1 to 1.5 to 1.6, can i just go from 1.1 to 1.6 in one hit?

step 1: search the development forum for amon ra's recovery. read the instructions to flash it.
step 2: go to cyanogenmod.com and read the instructions for upgrading from scratch.
once you've done those two things, you'll be much happier.

maniacallyhappy said:
I want to upgrade my recovery, but I haven't found anything that can help me upgrade the thing. any links to tell me how to do it? and is there no order that I have to install the firmware? instead of having to go from 1.1 to 1.5 to 1.6, can i just go from 1.1 to 1.6 in one hit?
Click to expand...
Click to collapse
You don't re-root when you need to change roms you just wipe in recovery mode
You need amon_ra
http://forum.xda-developers.com/showthread.php?p=4647751#post4647751

Like the other guys have said, upgrade to Amon_RA recovery. This allows you to flash updates from any filename, not just update.zip. The link is in my signature, or it's on the G1 Dev Forum in the sticky threads.
After that, boot into recovery and go to the Wipe section. Wipe all the things there, not just data. I never used to wipe everything either and I found that was the source of alot of my problems when changing ROMs. Obviously if you have your SD card partitioned and you choose to wipe your ext then you will lose what is on there.
Cyanogen has good instructions on his Wiki, but basically you want to flash DRC83_base_defanged, DO NOT reboot, and flash CM over the top straight away, then reboot your phone and you'll have a nice clean CM install.
This flashes the HTC Developer image which includes legal Google apps (Gmail, Maps, etc) and then flashes CM over the top which includes all his cool changes but does not delete the Google apps which we aren't supposed to distribute because it's illegal. Perhaps you are not aware, but Cyanogen got a Cease & Desist letter from Google, which is why we now do the defanged base method. More ROMs are moving to this method as time goes on, Pay's ROM and Super D are two which do this.
As an aside, I have found CM is not the fastest ROM. Some people have had better success with a ROM called Super D which is quite popular and includes many of the Eclair bits and pieces which CM does anyway. I personally use Dwang's ROM which is a much more plain Donut image however it absolutely flies. Both of these are linked in my sig, and are usually within the first few pages of the G1 Dev Forum anyway.

Thank you guys so much! I really appreciate how helpful the community has been. I've been having some issues with the the upgrading and maintaining because of my memory card slot dying out. A lot of the times the system will not register that I have my micro sd card in it or it'll say the sd card is blank. I just hope the phone lasts the extra 6 months till the end of my contract
Sent from my T-Mobile G1 using XDA App

maniacallyhappy said:
I've been having some issues with the the upgrading and maintaining because of my memory card slot dying out. A lot of the times the system will not register that I have my micro sd card in it or it'll say the sd card is blank.
Click to expand...
Click to collapse
I used to have this problem too, but it went away when I moved to 1.6 (coincidentally the same time I replaced the SD Card that came with my phone with a new Class 6 card). So either the upgrade of the OS or the SD Card fixed it.

In going to have to try the new men card cause the system is already at 1.6 but the phone is still trying to kill itself.
Sent from my T-Mobile G1 using XDA App

[Q] Updated cdma hero rooting help?

I'm pretty new to this stuff so i went for the easiest and fastest way to root, the universal android root.
I tried it and it wont root it. Ive been reading and im guessing its because my hero is at the newest update.
Firmware version: 2.1-update1
Software number: 2.32.651.2
any solutions? or other legit methods?
pm me or post
anything helps
thanks

That version has been rootable for a long time. There is a method here. Can't link since I'm mobile, but the intro threads should have directions in them; or the Wiki for that matter.
Check them out! They're full of good info.

This solution is reported to work for 2.32.651.2:
One click Root APK for CDMA Hero

Search for super one click. I use it on mine when I want to start fresh. It works on the newest update. But you do need windows sdk installed.

HELP! Im confused..Sprint Hero 2.1update
Ive been looking through these threads for a couple hours now and I cannot seem to find any of them that apply to my phone. I have a different build number and all of that. My phone is running super slow and about to bounce off a wall. I am looking to root but I have no clue what all I need to do with the different ROMS and everything to speed it up. Any ideas everyone?
Sprint Hero
baseband version 2.42.02.10.29
Build number 2.32.651.2 CL282911 release-keys
Software Number 2.32.651.2
Any Ideas would be GREAT!!! Thanks

I am having the same issue. I did get it rooted with SuperOneClickv1.7-shortfuse.zip file. However, I'm not sure where to go from here. This is a lot more complicated than it was to root and upgrade my Moment to Froyo. I'm now working on my husband's HTC Hero CDMA build number is 2.32.651.2, Sprint release Android 2.1-1 update. I want to do a nandroid backup from what I understand (no clue how to do this!) and then flash a 2.2 or even 2.3 custom ROM to the phone after wiping some files? I have this process down on the Moment, but the Hero is completely different and I'm lost.
I have ASTRO file manager installed and under apps after using the SuperOneClick, I do see SuperUser. I was thinking I wanted to update to the CM 6.1 ROM for now, until the newer systems are completely stable and up-to-date... but I have no clue where to go from here as most directions I've found don't apply to this build. Since I'm 6 months pregnant and off of work until after baby gets here, I have most of the day to tinker with it, when not chasing a rowdy 3.5 year old around the house. Just need some guidance.
Attached is the ZIP file for SuperOneClick

T3chnologicallyChallenged said:
I am having the same issue. I did get it rooted with SuperOneClickv1.7-shortfuse.zip file. However, I'm not sure where to go from here. This is a lot more complicated than it was to root and upgrade my Moment to Froyo. I'm now working on my husband's HTC Hero CDMA build number is 2.32.651.2, Sprint release Android 2.1-1 update. I want to do a nandroid backup from what I understand (no clue how to do this!) and then flash a 2.2 or even 2.3 custom ROM to the phone after wiping some files? I have this process down on the Moment, but the Hero is completely different and I'm lost.
I have ASTRO file manager installed and under apps after using the SuperOneClick, I do see SuperUser. I was thinking I wanted to update to the CM 6.1 ROM for now, until the newer systems are completely stable and up-to-date... but I have no clue where to go from here as most directions I've found don't apply to this build. Since I'm 6 months pregnant and off of work until after baby gets here, I have most of the day to tinker with it, when not chasing a rowdy 3.5 year old around the house. Just need some guidance.
Attached is the ZIP file for SuperOneClick
Click to expand...
Click to collapse
You need a custom recovery installed to nand and flash. Rom manager is the easiest way to install recovery. Once you have that, backup, wipe data, cache, and dalvik, install rom zip just like on the moment. Also to get to recovery, hold down home then power.
Sent from my HERO200 using XDA Premium App

I'll try that this evening when my husband comes home with his cell. I have a recovery file on the SD that I put there via Windows (recovery-RA-heroc-v1.2.3). Is this a good one to use? I'll download ROM manager onto the phone this evening and go from there. Or, if updating to CM 6.1 should I just flash that with the ROM manager?

T3chnologicallyChallenged said:
I'll try that this evening when my husband comes home with his cell. I have a recovery file on the SD that I put there via Windows (recovery-RA-heroc-v1.2.3). Is this a good one to use? I'll download ROM manager onto the phone this evening and go from there. Or, if updating to CM 6.1 should I just flash that with the ROM manager?
Click to expand...
Click to collapse
That's an older version. You can flash that way. I prefer to go into recovery to flash. Better luck that way for me. At least you don't have to run the updater to have factory to flash like the moment. You do need to nand restore to a sense rom to update profile and PRL though, and then nand back to CM.

CM has a great guide on their wiki... http://wiki.cyanogenmod.com/index.php?title=HTC_Desire_(CDMA):_Full_Update_Guide

[Q] Help restoring phone needed

Sprint Hero
8gb new SD card
Was rooted to a cyanogen mod 6 (???)
The other day my sd card needed to be replaced. This card had my backup info on it, but became corrupted. I tried using various utilities in Win7 to try to fix the card, but had no success. Somewhere during the process of everything, I must have erased/corrupted the info on the phone itself, as it will no longer boot.It just freezes at the HTC screen.
I am trying to flash a new rom to the phone via the sd card using the hboot method. I have tried various roms, and had one actually start to install itself, but at the end it said the system info is older (not sure of the exact words) and would not proceed. So now I am stuck in what to do.
I want to get my phone working. I don't care if it is the basic stock OS, or something better at this point, as I can mod it once get it up and running. I am able to get to the clockword recovery prompts (if this helps any).
Any help in resolving my problem would be appreciated! Specific steps would even be better
I can't stand being without a phone... and this is driving me crazy!

U still have a recovery on ur phone?
Sent from my HTC Hero CDMA using XDA App

i have clockwork, if that is what you are referring to???

Run the RUU from bootloader and restore to factory. Re-root and you'll be good to go.
If you still have Clockwork recovery you can flash a new ROM from there and the problem should be fixed as well.

Is this a new ROM you are working on?

Thank you.. I think I have it working again.. I downloaded a rom from this link... http://forum.xda-developers.com/showthread.php?t=581521 and it booted back up....
so, if I want to go to a different rom, say CM 7, or even a different one all together... I can do it from here using rom manager, right ??????? Thanks for your help!!!!!

Did you make sure you were fully charged. My phone sometimes refuses to get past the white HTC screen. If I make sure it's charged and sometimes I pull the battery and just let it sit. I always boots. It never did this on any rom previous to gingerbread. I would do this before spending an hour or two rru'ing or reflashing. My phone didn't seem to like the cwr 3.0.0.5 either, lots of booting issues. I had to downgrade back to 2.5.whatever. Looks like you got it fixed though.
Sent from my HTC Hero CDMA using XDA App

Moved to Q&A...

[Q] HTC Hero looping on the boot screen. How can this be fixed?

Phone: HTC Hero, CDMA
Carrier: Sprint
While others have reported of this problem, the solutions that worked for them dont work for me. Im really stuck.
I know, its an old and slow phone, but I was hoping to go to CM7 to get better performance out of it. Well, I must have done something wrong in the process. My current android version is 2.1-update1. I used z4root to root it and used the clockworkmod ROM manager to install a recent nightly after backing-up my current ROM. Installing the nightly failed, something to do with the zip, but my phone had already been wiped and rebooted in default factory mode. I tried doing the install again with the same nightly and a more recent one, but it kept failing due to a problem with the zips. After one of the reboots, the OS just wouldnt load; seems to be looping on the 'HTC quietly brilliant' screen. I am able to boot in recovery mode, but cant figure out how to get past this looping issue.
Ive tried booting using the back-up I created with no luck. Ive even tried going through the RUU process (cant post a link cause Im a new member here), which results in an error message stating that theres an incorrect bootloader.
I did figure out that I was trying to install CM7 using the wrong zip; had the GSM version. Ive tried installing CM7 with the correct zip, but, after reboot, it loops at the animation with the android on the skateboard and the blue arrow around it. Not sure what it means that the two different OSs loop at, what looks like, the same points.
I probably did something wrong, but Im hoping somebody with a better understanding of all thats involved can let me know if there is any way for me to fix this. Thanks in advance for the help.

grins1 said:
Phone: HTC Hero, CDMA
Carrier: Sprint
While others have reported of this problem, the solutions that worked for them dont work for me. Im really stuck.
I know, its an old and slow phone, but I was hoping to go to CM7 to get better performance out of it. Well, I must have done something wrong in the process. My current android version is 2.1-update1. I used z4root to root it and used the clockworkmod ROM manager to install a recent nightly after backing-up my current ROM. Installing the nightly failed, something to do with the zip, but my phone had already been wiped and rebooted in default factory mode. I tried doing the install again with the same nightly and a more recent one, but it kept failing due to a problem with the zips. After one of the reboots, the OS just wouldnt load; seems to be looping on the 'HTC quietly brilliant' screen. I am able to boot in recovery mode, but cant figure out how to get past this looping issue.
Ive tried booting using the back-up I created with no luck. Ive even tried going through the RUU process (cant post a link cause Im a new member here), which results in an error message stating that theres an incorrect bootloader.
I did figure out that I was trying to install CM7 using the wrong zip; had the GSM version. Ive tried installing CM7 with the correct zip, but, after reboot, it loops at the animation with the android on the skateboard and the blue arrow around it. Not sure what it means that the two different OSs loop at, what looks like, the same points.
I probably did something wrong, but Im hoping somebody with a better understanding of all thats involved can let me know if there is any way for me to fix this. Thanks in advance for the help.
Click to expand...
Click to collapse
I *think* your error, in general, was using a bunch of "easy" one click methods and not properly learning (READING) about what the proper steps are. Here is my advice (assuming you are still rooted) -
1.boot into recovery (power off phone, hold home button, press power)
2.wipe data/factory reset
3.mounts/storage - wipe system and boot
4.restore nand backup OR flash ROM/gapps (from the same thread)
5.reboot, and be patient, bootup could take 5-10 minutes.
Good Luck.

You are the man (or woman)! I believe the formatting of system and boot is what did it. Really appreciate the help.

grins1 said:
You are the man (or woman)! I believe the formatting of system and boot is what did it. Really appreciate the help.
Click to expand...
Click to collapse
It is important, as Il Duce said, that you definitely do a good amount of reading when you want to get involved in rooting your phone. You are opening yourself up to some great innovation and fun, but you can also cause yourself a lot of headaches.
Recovery is your friend. If you can get into that, at least you know things are ok. I like to wipe (or format) system, data, cache, and boot 3x just to make sure that clockwork recovery cleaned everything and there are no dingleberries from the last rom I was using.
Flashing the correct type of rom is even more important. Don't flash a gsm rom to a cdma phone and NEVER flash a gsm radio to a cdma phone. Once you delve into the reading aspect of XDA, you will see that is the sure way to brick your phone.
Some roms take longer than others to boot up. Let it run its course. Sometimes it will reboot right after installing. At some point, you might want to make a nandroid of the new rom you are running and go back to your stock (2.1 update 1) and update your PRL, baseband, etc. (if you haven't done an update in a while).
Have fun, that is the most important part and we seem to have a lot of it here in HeroC XDA land.

You know, I put in a fair share of reading about how to update the ROM on my phone and I was under the impression that it would be fairly simple. I figured that since this has been done for quite a while and all these tools have been developed, I wouldnt need to know what happens on the back end during a root or ROM install.
But I did get myself into a bind that I wasnt able to figure out on my own. And with the help of this forum, I was able to get past my problem. Im glad to say I now have a phone that is functioning very smoothly with CM7 and the apps I need.
Next step for me is figuring out how to save my apps to the SD card so that I can install from there if/when I update my ROM in the future.
Thanks again for the help!

Get titanium backup FTW.
BANG! from my shooter...