Related
Credit goes to deis, who found this fix first. Again, I am just passing it on and packaging it for everyone.
As always, USE AT YOUR OWN RISK. This is an OpenGL driver change and could cause system instability. Limited testing has shown no issues so far, but YMMV.
--------------------------------------------
Link: http://www.mediafire.com/?cr1c8lx6hj94q9l
-------------------------------------------
This is an update.zip with a recovery command file. You would run this the same way you would run any firmware update (for cwm users, just extract and place the update.zip anywhere on /sdcard - for non-cwm users, you need to drop update.zip on the root of /sdcard and the recovery folder there as well, and run recovery). After reboot, give the system a minute or so to stabilize.
Also, to install Angry Birds (on TnT Lite), mount /sdcard to your PC (so it's no longer accessable to Android) and then sideload Angry Birds or install it from the Market. It should install. EDIT: Here's a trick to do that, if you have the Marketplace working via the cache / Titanium Backup hack:
1. Go into Settings -- Storage and unmount the SD card.
2. Go into the Marketplace and install Angry Birds. It should be successful.
3. Go back into Settings -- Storage and re-mount the SD card.
4. Enjoy AB and all the hours of time you will waste playing it.
If anyone has any major problems with this change, please PM me and I'll update this post with a backout update.zip. Essentially, this fix is one file that was taken from the latest Nvidia development kit.
EDIT: This fix has been integrated into TnT Lite 2.00.
People are going to love you man.
Okay so. When I try to install from market, I get download unsuccessful. When I try to sideload, it says Application not installed. And I don't know how to sideload when SD is unmounted. Suggestions?
edgevision said:
Okay so. When I try to install from market, I get download unsuccessful. When I try to sideload, it says Application not installed. And I don't know how to sideload when SD is unmounted. Suggestions?
Click to expand...
Click to collapse
Got it to install by plugging into my computer turning USB storage on then inststalling from market. But no video on zpad
Double post
Installed update (zpad 1.X). Update applied fine, but when going to market I get an error stating there isn't enough room (settings showing SD Card Not mOunted), and Internal phone storage at 3.37GB
akodoreign said:
Got it to install by plugging into my computer turning USB storage on then inststalling from market. But no video on zpad
Click to expand...
Click to collapse
Yes, good point on sideloading. I use "adb install" and that worked for me, and I used the Marketplace as well. I guess you could also use Dropbox as a solution?
cannot get this to work on zpad, i flashed the fix in cwm but ab will not install. can anyone confirm it works on zpad?
Saved for future reference. I actually was able to install from the market and play just fine, but this is good to now in case anything goes wrong.
Sent from my SAMSUNG-SGH-I897 using XDA App
Installed fine in Zpad but no video.
Crimton said:
cannot get this to work on zpad, i flashed the fix in cwm but ab will not install. can anyone confirm it works on zpad?
Click to expand...
Click to collapse
I can confirm it works on zpad. You must mount your sdcard to your computer or ab will not install.
roebeet said:
Credit goes to deis, who found this fix first. Again, I am just passing it on and packaging it for everyone.
As always, USE AT YOUR OWN RISK. This is an OpenGL driver change and could cause system instability. Limited testing has shown no issues so far, but YMMV.
--------------------------------------------
Link: http://www.mediafire.com/?cr1c8lx6hj94q9l
-------------------------------------------
This is an update.zip with a recovery command file. You would run this the same way you would run any firmware update (for cwm users, just extract and place the update.zip anywhere on /sdcard - for non-cwm users, you need to drop update.zip on the root of /sdcard and the recovery folder there as well, and run recovery). After reboot, give the system a minute or so to stabilize.
Also, to install Angry Birds (on TnT Lite), mount /sdcard to your PC (so it's no longer accessable to Android) and then sideload Angry Birds or install it from the Market. It should install.
If anyone has any major problems with this change, please PM me and I'll update this post with a backout update.zip. Essentially, this fix is one file that was taken from the latest Nvidia development kit.
Click to expand...
Click to collapse
When you say mount to pc.....that is to turn off debug and enable sd to pc correct? Then when you say side load, what does that mean? Sorry for dumb question...only way i have been able to load AB is with adb install which i dont think works when you enable pc to sd setting. Thanks
rothnic said:
I can confirm it works on zpad. You must mount your sdcard to your computer or ab will not install.
Click to expand...
Click to collapse
ok, i've just been having trouble getting things to install from the market lately and i can't loading it from the sd while its mounted to pc. so i gues my only other choice is to load via adb but i have been unsuccesfull writing to anywhere but root of sd with adb(in tnt at least)
insight3fl said:
When you say mount to pc.....that is to turn off debug and enable sd to pc correct? Then when you say side load, what does that mean? Sorry for dumb question...only way i have been able to load AB is with adb install which i dont think works when you enable pc to sd setting. Thanks
Click to expand...
Click to collapse
There are two problems with AB - getting it to install and getting it to run with full video.
This is exactly how I got Angry Birds to install, on TnT Lite:
- Download the 1.4.2 pk from anywhere, ie. from getjar.
- Setup the Android SDK so I can use ADB.
- boot up the device, connect to USB and enable USB debugging (so that ADB will function).
- mount the storage to my PC (this is the critical part - if you don't do this you can't install the app). This disables /sdcard from being visible in Android.
- run "adb install Angry_Birds_v1.4.2.apk" to install the app.
Now some of you probably don't have ADB - in that case, I would recommend trying to use the Marketplace, possibly Dropbox or maybe even copy the file via root explorer to some other location than /sdcard and then run it there. You have a few options.
The fix I posted assumes that you already have Angry Birds installed, and you are having the "no video, only sound" issue. This fix should correct the video problem.
Btw, I really hate this game.
Thank you
I have AngryBirds working on stock Now
also says installed on market
My Viewsonic Birds are singing too ... LOL
catttman said:
I have AngryBirds working on stock Now
also says installed on market
Click to expand...
Click to collapse
ok... got it installed... using this method... But after the first "round" when it ends, it aborts instead of going to the next round.
I am running full vanilla.
I did the open gl zip update, then connect to usb, mounted sd, enabled debug and loaded it via adb.
Also had loaded it several times from root explorer before I did it this way. But in any case, it still aborts after first game
Tried clearing davlic cache... no difference...
works- Thanks guys!
TnT Lite 1.02
insight3fl said:
ok... got it installed... using this method... But after the first "round" when it ends, it aborts instead of going to the next round.
I am running full vanilla.
I did the open gl zip update, then connect to usb, mounted sd, enabled debug and loaded it via adb.
Also had loaded it several times from root explorer before I did it this way. But in any case, it still aborts after first game
Tried clearing davlic cache... no difference...
Click to expand...
Click to collapse
You mean "Mighty Hoax"? I'm still on "Poached Eggs" 2-10. Not sure if that helps.
roebeet said:
You mean "Mighty Hoax"? I'm still on "Poached Eggs" 2-10. Not sure if that helps.
Click to expand...
Click to collapse
No ..I mean like the very first round with the red birds and one pig....after it tallys the score instead of advancing to the next game, it aborts and returns to gtablet hopme screen. It is as if it is not able to "Save" that first score somewhere, and it then closes....what a tease this was!
insight3fl said:
No ..I mean like the very first round with the red birds and one pig....after it tallys the score instead of advancing to the next game, it aborts and returns to gtablet hopme screen. It is as if it is not able to "Save" that first score somewhere, and it then closes....what a tease this was!
Click to expand...
Click to collapse
Sorry, did not have that issue (I almost wish I did). TnT Lite 1.02.
I fully rooted my NC and installed a number of apps that work but now my NC wount mount to my computer as separate flash drives. How can i fix this problem? Did i do something wrong? Ill appreciate the help.
Funny, I just realized this happened on my NookColor as well - just got to the bottom of it though.
Somehow, my Windows box was recognizing the Android Composite ADB device twice, and this was somehow nuking the usb-storage mode. The fix was simple:
Make sure adb shell isn't running
Go into device manager, and uninstall both instances of "Android Composite ADB Interface" - I deleted the device drivers to be sure (Windows 7 option)
Unplug NookColor from USB
Plug it back in after a few seconds. Let Device manager do its thing. For me, it fails and gives me the 'Drivers not installed' caution symbol next to the "Nook" entry in the Device manager.
Rightclick on the Nook entry in Device Manager, then select 'update drivers.' Point it back at the original USB drivers that you used while rooting when prompted.
Wait for the system to do its thing, installing all the drivers - takes a good minute or so. Drives appear in your Explorer
(I had to unplug and replug before the computer would actually let me access CONTENT on the Nook and the SDcard - your experience may vary.)
Or you could just use adb to push/pull files.
You could - but I find it easier when my media directory (for instance) is just mounted as part of explorer.
Mine does the same thing. Tried your solution and it still don't work?
Plumbergeek -- I have found that sometimes the last installed APK (application) causes this fuss. Uninstall the last thing you added, reboot and try again. Sometimes I have to go back several applications to find the culprit. Once the offending APK is identified I then try to find an alternative application to install.
If you don't know how to uninstall applications, search the threads ... the answers are here. You can also install an application called Quick Uninstall. This app, though, usually will not delete/uninstall system applications.
Hope this helps!
indeana said:
Plumbergeek -- I have found that sometimes the last installed APK (application) causes this fuss. Uninstall the last thing you added, reboot and try again. Sometimes I have to go back several applications to find the culprit. Once the offending APK is identified I then try to find an alternative application to install.
If you don't know how to uninstall applications, search the threads ... the answers are here. You can also install an application called Quick Uninstall. This app, though, usually will not delete/uninstall system applications.
Hope this helps!
Click to expand...
Click to collapse
Well, the last one was Auto Config Script so I'll just wipe it and start over.
I have the same problem and can't figure out how to fix this
Both drives are listed in Device manager as B&N Ebook USB Disk storage
but the won't mount in windows.
When connected to PC that wasn't use to root it driver installation will fail
and there is Unknow device listed in Device manager (Nook) and two B&N USB Drives
but they will not mount as well.
Did anyone found what causes this ?
Thanks
Never mind, got it,
you have to push the n button to get it in to USB mode.
lifeisfun said:
Never mind, got it,
you have to push the n button to get it in to USB mode.
Click to expand...
Click to collapse
That's strange... i've never heard of anyone having to do that before...
Anyone else need to do this to mount?
I've always had to unlock mine to get it to mount in Windows. I just thought that was normal... is it not?
Sent from my Nooted friend...
I was going crazy unable to mount the storage and this did it for me
I have no-lock installed so unlocking wasn't the problem for me.
This didn't help. I can't even find those in Device manager
I'm also stuck with this problem. I am on Linux and can see two drives listed as B&N Ebook Disk, with all the other properties "unknown". I can neither open the drives nor connect to them with adb. It says that there is no device connected when I try to connect with adb.
This problem only started after installing Honeycomb. I was able to connect to the device through USB just fine when I was on a normal-but-nooted os.
Drive letters appear in explorer, but still can't write to them
Hi, I have a variation on the problem... My ADB install is confirmed (via cmd line) and I have two new drive letters appear (I guess it's one for the nook's internal memory, the other for the micro SD card). However, when I try clicking on either letter, Windows pops up an error message saying "please insert card". If it helps, my device list ID's the nook as a "composite USB device", not as a "nook"... Any suggestions? Thanks in advance!
MityaCat said:
Hi, I have a variation on the problem... My ADB install is confirmed (via cmd line) and I have two new drive letters appear (I guess it's one for the nook's internal memory, the other for the micro SD card). However, when I try clicking on either letter, Windows pops up an error message saying "please insert card". If it helps, my device list ID's the nook as a "composite USB device", not as a "nook"... Any suggestions? Thanks in advance!
Click to expand...
Click to collapse
Same issue. This is killing me.
I fully rooted my NC I have Superuser and Busybox and a number of apps that I installed via Adb but now it only mounts to Adb it does not mount as a external storage for my micro sdcard or the storage on the NC so I cannot transfer files yo my microsd I have to take it out. What did I do wrong? If anybody can help me out. Did I install an app that corrupted the storage. Ill appreciate the help.
List of apps installed.
Dolphinbrowser
Dolphin addons
Blogger
Miui browser
Facebook
Kindle
Googlemaps
Youtube
Angrybirds and angrybirds seasons
Doddle jump
Busybox
Superuser
Adw launcher
Beautiful widgets
Widget locker
Handlerexploit widget
Quickboot
Astro filemanager
K9 mail
Shootme
Fring
Titanium backup
Sheadspreet
Youtubedownloader
i ran into something like this yesterday, i just popped the card out and put it back in, seemed to fix it...
I tried it a number of times. I uninstalled the adb composite drivers seemed to had worked but then it stooped working. It was working when I first updated the drivers the first time.
yep
Confirmed... I am having this problem as well after rooting device.
I just noticed the same today
Is there solution to this ?
An obvious thing, but important. Your NC needs to be on and unlocked for it to recognize as external storage, but it only needs to be plugged in for adb access.
If this is already the case, try going into device management and uninstalling (but not deleting) the Android Phone or Android ADB Device or whatever the entry is called. Scan for changes again. It should show up as external storage now. If you need adb access again, you can simply install the driver using the usual method.
I had to repeat this once or twice, but my NC always shows up as external storage in Explorer now. I think this is what fixed it (maybe + a couple reboots)
When I go to device manager there is no Android Phone or Android ADB Device listed
The only strange thing is that under Portable devices I get I: drive with yellow triangle.
So I made my Froyo bootable SDCard and I am stuck, it boots fine and runs fine my PC FINALLY recognizes it as an Android composite device. The froyo image comes with no file browser so I can't install my apks that I moved to the internal memory, and my wireless doesn't work and I have no way to troubleshoot or configure it, I can't find any "settings" or anything like that.
When I try to do an adb install (I am trying the adbwireless.apk) the adb shell just hangs and hangs. The wiki says that I need wireless to get Gapps to get market . . . but I'd be happy with a way to install adks either via adb or sideloaded and browsed.
i am all broken.
i don't really NEED this to work but I sort of need flash for the NC to be what it needs to be in my life.
Had to factory reset kfhd7 and when I did, it booted up like an android phone. ... Now there's no browser and I can't get play to work. Usb debug is enabled but when I connect to the computer to try and push a browser, my computer doesn't recognize it. I have all the newest drivers installed and just about every program that I can think of (adb, sdk, jdk) What I don't have is a fastboot cable. Any ideas?
Missing my kindle
Edit* So I do have chrome installed but when I open it, I get an error message saying "critical functionality required to run chrome is missing; either your chrome installation is incomplete, or not compatible with this version of android"
Terminal emulator installed too but when I try to open it I get a "terminal emulator has stopped" error.
Super SU installed, works.
No es file explorer
edit#2
Ok, so I decided to open cmd just to see if I can recognize my device.... and it did! So how can I fix my kindle if adb is connecting?
Edit#3 adb devices shoes device but when running a command, it says "device offline"....
Edit#4 plugged usb into another port and reloaded drivers = adb connects, device is online. I have tested by pushing an app to the sdcard. My goal now is to be able to push es file explorer to /system/app/ .... or ..... /data/app/ ...... or where ever it will become active for use. (you know what I mean?) I don't know how to change the permissions via adb and push to system folder. I believe I have successfully pushed es file explorer to the /sdcard/ but I have no idea where to go next.
Now what..... ?
How to Install Packages using adb install
Krsmqn said:
Had to factory reset kfhd7 and when I did, it booted up like an android phone. ... Now there's no browser and I can't get play to work. Usb debug is enabled but when I connect to the computer to try and push a browser, my computer doesn't recognize it. I have all the newest drivers installed and just about every program that I can think of (adb, sdk, jdk) What I don't have is a fastboot cable. Any ideas?
Missing my kindle
Edit* So I do have chrome installed but when I open it, I get an error message saying "critical functionality required to run chrome is missing; either your chrome installation is incomplete, or not compatible with this version of android"
Terminal emulator installed too but when I try to open it I get a "terminal emulator has stopped" error.
Super SU installed, works.
No es file explorer
edit#2
Ok, so I decided to open cmd just to see if I can recognize my device.... and it did! So how can I fix my kindle if adb is connecting?
Edit#3 adb devices shoes device but when running a command, it says "device offline"....
Edit#4 plugged usb into another port and reloaded drivers = adb connects, device is online. I have tested by pushing an app to the sdcard. My goal now is to be able to push es file explorer to /system/app/ .... or ..... /data/app/ ...... or where ever it will become active for use. (you know what I mean?) I don't know how to change the permissions via adb and push to system folder. I believe I have successfully pushed es file explorer to the /sdcard/ but I have no idea where to go next.
Now what..... ?
Click to expand...
Click to collapse
Krsmqn,
Sorry for the delayed response, we have been real busy the last few days. You may use the
following command to install or reinstall software on the Kindle:
Code:
adb kill-server
adb start-server
adb devices
android update adb
If adb is working move on to install software:
Code:
adb install package-whatever.apk
You need to make sure the .apk software package in in the same directory as adb. If
you can not get the Kindle stable you may need a USB Factory Cable, you may order
one from XDA User SkOrPn just send him a PM with the subject Factory Cable Info Please,
include your ship to country and number of cabled needed. He will respond with a PayPal
Invoice. The cable is about $15 USD and is worth every penny since it allows quick
recovery of your Kindle.
prokennexusa,
I want to thank you for all your help. Unfortunately, my issue was kind of a rare issue. I had deleted some amazon apps that were system apps. I tried your solution time and time again to no avail. I was stumped until I remembered a thread I saw in development.
http://forum.xda-developers.com/showthread.php?t=1886189
I was able to download and unzip the 7.2.3 update version and simply install the apks that I was missing. Then, as far as google play went, I just went into System>Applications>Installed Applications>Appstore (Amazon)> Force stop, clear data & cache. Reinstalled Vendor.apk and then updated. Viola!
The USB notification came back, as well as all the other options in settings. Problem solved. Hope this helps future users.
Follow Up - Feedback
Krsmqn said:
prokennexusa,
I want to thank you for all your help. Unfortunately, my issue was kind of a rare issue. I had deleted some amazon apps that were system apps. I tried your solution time and time again to no avail. I was stumped until I remembered a thread I saw in development.
http://forum.xda-developers.com/showthread.php?t=1886189
I was able to download and unzip the 7.2.3 update version and simply install the apks that I was missing. Then, as far as google play went, I just went into System>Applications>Installed Applications>Appstore (Amazon)> Force stop, clear data & cache. Reinstalled Vendor.apk and then updated. Viola!
The USB notification came back, as well as all the other options in settings. Problem solved. Hope this helps future users.
Click to expand...
Click to collapse
Krsmqn,
Great post Krsmqn, I am glad to hear your problems are solved! We offer a fresh copy of the /system/app
folder here: https://dl.dropbox.com/u/54456659/app.zip
Anyone who is experiencing odd issues can download this folder and side load it back to the Kindle through
adb or ES File Explorer. Thank you again, I was getting a bit worried.