I'm getting the following errors trying to install Darky's 9.3 rom from CW
I have tried wipe and no-wipe and get the same error all times.
I have wiped from CW and get the same error.
I have tried with voodoo enabled and disabled. I have tried downloading the install file from different computers and still get the same errors.
Error is:
E: can't chown/mod /system/bin/netconfig
failure at line 75
set_perm 0 3003 02753 system: bin/netconfig
Once this happens the phone is ****ed, it won't boot, so i flash back to darky 9.2 using odin. Try to upgrade to 9.3 straight away aftet the 9.2 flash and get the same errors above...
Can anyone assist please.
did you try other rom, or is it just darky?
Have you tried redownloading the rom?
EDIT: Sorry, just reread your post.... What model of phone is it?
Soniboy84 said:
did you try other rom, or is it just darky?
Click to expand...
Click to collapse
Well i have been flashing darky's ROM since before version 9 without any issues.... Its only version 9.3 which i have problems with
kolipko said:
Have you tried redownloading the rom?
EDIT: Sorry, just reread your post.... What model of phone is it?
Click to expand...
Click to collapse
Yep downloaded it a few times, using different computers as well.
Its an I9000 Aussie model.
I'm hoping for an odin version on 9.3 to see if that works.
Is there anything else i can try? Perhaps going back to a stock firmware, then flashing to darky's would be an idea.... or perhaps try doc's rom?
I would go to stock and then flash 9.3 with wipe
it seem that no one else have the same issue. try to
DISABLE ALL LAG FIX
re-flash Darky
you can try to flash DocRom indee,
I switch from Kitchen966 to Darky93 (+speedmod250Hz) since 2 days, both use JS5, I don't know why but I feel darky 93 is snappier and more stable than Kitchen966. (But it just 2 days of use)
kolipko said:
I would go to stock and then flash 9.3 with wipe
Click to expand...
Click to collapse
Is the best way to flash back to stock to disable voodoo then flash with Odin?
pascaliut said:
it seem that no one else have the same issue. try to
DISABLE ALL LAG FIX
re-flash Darky
Click to expand...
Click to collapse
Done this numerous times. Voodoo lagfix is what i run and it always fails when its disabled or enabled.
Is the best way to flash back to stock to disable voodoo then flash with Odin?
Yes and i prefer to tick repartition with a bad rom and clean everything .
Then build yourself a rom that works .
http://forum.xda-developers.com/showthread.php?t=817703
jje
Everyone says to flash back to stock but iv always used darkys ressurection edition then install darkys config app and tick wipe then reflash in cwm
Sent from my GT-I9000 using XDA Premium App
Haviic said:
Everyone says to flash back to stock but iv always used darkys ressurection edition then install darkys config app and tick wipe then reflash in cwm
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
same as my problem. already flash back to stock but still cannot resolved the problem. hope to find a way to upgrade to darky rom again
are you able to ssh in to the phone and set the permissions yourself?
Related
hi all,
i've got a problem which hopefully you guys can help me with. i rooted my i9000(2.2) with z4root and then installed oclf....
now i wanted to flash gingerbread 2.3.3, so to backup the current ROM i installed ROM manager 3.0.2.2 and did flash cwm recovery, then proceeded to 'backup current ROM' but i'm getting this screen - Android system recovery (3e) and its giving me the message that its' updating media, installing mulit-csc and install default apk-files... how can i backup the ROM? i tried searching but couldn't come up with anything useful...any help would be appreciated.. i'm pretty much a newbie when it comes to this stuff
you can't install a custom zip with 3e recovery install a kernel containing cwm or if it is easier for you a rom including it(darky resurection for example) you can also downgrade your recovery and then install cwm with rom manager(2.1 roms have 2e recovery it is even possible to downgrade it with a script)
easiest would be darkys rom with odin
do you have 3btn?
edit:btw you need clockworkmod(cwm) to do a backup
Sent from my GT-I9000 using Tapatalk
gbohm said:
do you have 3btn?
edit:btw you need clockworkmod(cwm) to do a backup
Click to expand...
Click to collapse
yes i've got 3btn and about the cwm it's currently unable to backup... should i install speedmod kernel?.... i'll try darky's rom like you mentioned but won't i need to backup first?
thanks for the reply
well you can't backup without cwm any kernel flashable with odin/heimdall having cwm will do it ...
with darky's resurrection you will loose all apps and everything
you should use titanium to save them but don't restore system apps in 2.3
backing up efs is a must tho...
Sent from my GT-I9000 using XDA Premium App
thanks for the reply
read this it clears a lot of questions
http://forum.xda-developers.com/showthread.php?t=723596
Sent from my GT-I9000 using XDA Premium App
il_bruto said:
hi all,
i've got a problem which hopefully you guys can help me with. i rooted my i9000(2.2) with z4root and then installed oclf....
now i wanted to flash gingerbread 2.3.3, so to backup the current ROM i installed ROM manager 3.0.2.2 and did flash cwm recovery, then proceeded to 'backup current ROM' but i'm getting this screen - Android system recovery (3e) and its giving me the message that its' updating media, installing mulit-csc and install default apk-files... how can i backup the ROM? i tried searching but couldn't come up with anything useful...any help would be appreciated.. i'm pretty much a newbie when it comes to this stuff
Click to expand...
Click to collapse
sounds like CWM is NOT installed to me? (3e would seem to indicate it hasn't to me) but I haven gone to gingerbread myself yet.
gbohm said:
read this it clears a lot of questions
http://forum.xda-developers.com/showthread.php?t=723596
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
did it!... flashed speedmod with odin and used the 3btn for going into recovery mode... selected backup and restore and then backup all.... got the backup file on the sd card and copied it to the pc too... so i guess i'm ready to install darky's resurrection...thanks a lot for the link
one more question, after installing darky's rom can i upgrade to gingerbread 2.3 with kies if samsung releases the upgrade?
il_bruto said:
did it!... flashed speedmod with odin and used the 3btn for going into recovery mode... selected backup and restore and then backup all.... got the backup file on the sd card and copied it to the pc too... so i guess i'm ready to install darky's resurrection...thanks a lot for the link
one more question, after installing darky's rom can i upgrade to gingerbread 2.3 with kies if samsung releases the upgrade?
Click to expand...
Click to collapse
no it will not work with kies buth with odin
remember you will delete everythinv on your phone (not the files/media but settings apps contacts etc. so save them)
you can use darkys normal rom no need for resurection
Sent from my GT-I9000 using XDA Premium App
i had oclf and speedmod installed.. so i disabled the oclf lagfix and removed the ext2 tools... but before flashing darky's rom i forgot to go in recovery mode and disable lagfix, is that a problem?? the rom is working perfectly but i read some posts that the lagfix should be disabled...
il_bruto said:
i had oclf and speedmod installed.. so i disabled the oclf lagfix and removed the ext2 tools... but before flashing darky's rom i forgot to go in recovery mode and disable lagfix, is that a problem?? the rom is working perfectly but i read some posts that the lagfix should be disabled...
Click to expand...
Click to collapse
they aren't on by default with speedmod.
even if on it shouldn't be a problem because both kernels(you used dark voodoo with darky ?) know ext4 but it is better to deactivate it. i myself had a problem with it it didn't mount data..
if it works now you are good to go
just a tip make nandroid backup before any lagfix chance
Sent from my GT-I9000 using XDA Premium App
gbohm said:
they aren't on by default with speedmod.
even if on it shouldn't be a problem because both kernels(you used dark voodoo with darky ?) know ext4 but it is better to deactivate it. i myself had a problem with it it didn't mount data..
if it works now you are good to go
just a tip make nandroid backup before any lagfix chance
Click to expand...
Click to collapse
before flashing i installed darkyrom manager and in the kernel option selected skip since i already had speedmod... i think i didn't use dark voodoo(installed version 9.5)?...but i did go in the advanced options in speedmod before the flash and enabled the lagfix and changed the data_fs, cache & DBDATA to ext4... i have already done nandroid backup....the phone has become so smooth it just feels different
thanks for replying gbohm.. you've been very helpful
you are very welcome.
you kept the kernel so what you flashed had no influence on your lagfix.
only if you chance ther kernel there could be problems.
if you flash a kernel better turn off lagfix (just to be safe)
in many cases there is no need to put it off but you have to know them with off you are safe to go...
Sent from my GT-I9000 using XDA Premium App
Noob question but I can't find a definitive answer from the search and want to be absolutely sure.
I'm currently on CM9 nightly builds but I'm finding it a little laggy if I do not reboot regularly and have been curious to test out the DMORE gingerbread ROM
What is the best way to do this?
Am I right in thinking that I can flash CF-Root with Odin now and then flash DMORE with cwm after that?
Do I tick repartition in ODIN?
Ta v much
Hi , you are already rooted so no need to flash new cf root.....in the op of cm9 it says that going back to gingerbread(cm7) will need flashing twice , so you could just put the new rom on your internal sd then flash it twice without reboot inbetween , after wipe of course.
imgibby123 said:
Hi , you are already rooted so no need to flash new cf root.....in the op of cm9 it says that going back to gingerbread(cm7) will need flashing twice , so you could just put the new rom on your internal sd then flash it twice without reboot inbetween , after wipe of course.
Click to expand...
Click to collapse
Ah, so I don't even need to bother with ODIN, thats good.
Cheers
EDIT: Even though in the OP of the DMORE rom it says I must already be on Gingerbread just doing two flashes will get around this?
I would probably take the safe option and downgrade to gingerbread ....but the 2 flash method should do the trick , worst that could happen would be having to go back stock through odin anyway
Sent from my GT-I9000 using xda premium
Just tried to flash dmore then and got a 'installation aborted' message :\
Should I flash GB in Odin first?
Yes , flash a stock Samsung gb firmware ...was worth a try.
Sent from my GT-I9000 using xda premium
No need to flash a full rom just flash cf-root with odin without reboot.when flashed,pull out battery.boot to recovery using 3 button combo.factory reset,wipe cache and dalvik and flash d-more.reboot.
I come back to gingerbred from the onecomisc rom one month ago, I just erased everything andput back the old bootloader before flashing gingerbread stock
Everything seems fine. 2.3.6 seems nice!
Hi guys. I have a I9000 and i want to install the CyanogenMod 9 on it. I`ve Already rooted my phone using the Unlock Root. However, I can`t go to the Clockworkmod recovery to install customs rooms. I tried to flash the CWM recovery using the Rom Manager app, but when i was installing, an error happened. I figured out that the problem is my kernel that is not compatible with the CWM. I know that i have to flash a compatible kernel using Odin, but which kernel should i flash??? My device is a Galaxy S I9000, 2.3.5 android, and 2.6.35.7-I9000XXJVT-CL617736 kernel. Already rooted. Please someone could help me??
Thank you so much
Don't use rom manager, use Odin to flash, CWM is bundled with rooted kernel (CF-root, Semaphore)
Here is a collection of links and tips to tackle different situations when flashing, updating, fixes...
http://forum.xda-developers.com/showthread.php?p=30415128
This guide could work for updating to cm9.1
http://forum.xda-developers.com/showthread.php?p=22471340
Most important is to start making a backup of files in /efs folder in case of IMEI loss after some flash job.
http://forum.xda-developers.com/showthread.php?p=9567974
O-T said:
Don't use rom manager, use Odin to flash, CWM is bundled with rooted kernel (CF-root, Semaphore)
Here is a collection of links and tips to tackle different situations when flashing, updating, fixes...
http://forum.xda-developers.com/showthread.php?p=30415128
This guide could work for updating to cm9.1
http://forum.xda-developers.com/showthread.php?p=22471340
Most important is to start making a backup of files in /efs folder in case of IMEI loss after some flash job.
http://forum.xda-developers.com/showthread.php?p=9567974
Click to expand...
Click to collapse
Hi, I have the same error problem, cf root was not bundled with my own root package. I flashed to gingerbread 2.3.6 xwjw1, I also tried rom manager to flash recovery and it was successful, but when I rebooted to recovery to backup my current rom it bootes to the android (3e) recovery. As I've discovered it seems rom manager is not compatible with the xwjw1 series. How do I get the correct cf root for xwjw1? Believe me I have tried google and am scared of the things I see since "jw1" is not behind any of the cf root packages I see. Any help would be appreciated, thanks.
xtome
On xwjw1 you can Odin flash as PDA Semaphore 250 tar kernel
http://forum.xda-developers.com/showthread.php?p=14481782
Untick re-partition before flashing.
After reboot you may need to install Superuser from Play Store.
That will give you root, CWM, gingerbread ready for CM9.1
O-T said:
xtome
On xwjw1 you can Odin flash as PDA Semaphore 250 tar kernel
http://forum.xda-developers.com/showthread.php?p=14481782
Untick re-partition before flashing.
After reboot you may need to install Superuser from Play Store.
That will give you root, CWM, gingerbread ready for CM9.1
Click to expand...
Click to collapse
Thanks a lot ot will try it out and get back to you. Once again thanks.
Or you can use the app SGS kernel flasher. Find in play store.
renanrolim said:
Hi guys. I have a I9000 and i want to install the CyanogenMod 9 on it. I`ve Already rooted my phone using the Unlock Root. However, I can`t go to the Clockworkmod recovery to install customs rooms. I tried to flash the CWM recovery using the Rom Manager app, but when i was installing, an error happened. I figured out that the problem is my kernel that is not compatible with the CWM. I know that i have to flash a compatible kernel using Odin, but which kernel should i flash??? My device is a Galaxy S I9000, 2.3.5 android, and 2.6.35.7-I9000XXJVT-CL617736 kernel. Already rooted. Please someone could help me??
Thank you so much
Click to expand...
Click to collapse
Use Odin to flash (put .tar in PDA and uncheck repartition). You can flash Semaphore JVT 1.8.0 or CF-Root v4.3
Sunnymen1975 said:
Or you can use the app SGS kernel flasher. Find in play store.
Click to expand...
Click to collapse
Thanks Sunny men, but OT's advice worked, I can now boot to semaphore recovery and wipe etc.
Question though, if I now flash cm9.1 rom, will I be able to boot to recovery without the holding any button combinations. What I mean is can I boot to recovery from the shutdown menu or do I need an app for it?
Also is cm9.1 the best rom for my phone? any thots guys? Thanks again.
xtome said:
Thanks Sunny men, but OT's advice worked, I can now boot to semaphore recovery and wipe etc.
Question though, if I now flash cm9.1 rom, will I be able to boot to recovery without the holding any button combinations. What I mean is can I boot to recovery from the shutdown menu or do I need an app for it?
Also is cm9.1 the best rom for my phone? any thots guys? Thanks again.
Click to expand...
Click to collapse
Yes, in CM 9.1 you can boot directly to recovery from the shutdown menu. CM 9.1 is very stable and fast, so try it. And when you flash CM9 for the first time, your galaxy will go into a bootloop. Then remove the battery, put it in, go to recovery with 3-button configuration and flash it again.
sin007 said:
Yes, in CM 9.1 you can boot directly to recovery from the shutdown menu. CM 9.1 is very stable and fast, so try it. And when you flash CM9 for the first time, your galaxy will go into a bootloop. Then remove the battery, put it in, go to recovery with 3-button configuration and flash it again.
Click to expand...
Click to collapse
Thanks sin007, that is invaluable advice. Will do just that. thanks again.
Hi guys, thanks for all the help. I have flashed CM 9.1 successfully.
Everything works OK for now.
Also flashed gapps, CM 9.1 seems to be a great ROM.
I have a question though, the gapps I flashed seems to have only a few Google apps, play store and Google talk. The file size was 49mb so is that all that's in gapps or is there a hidden mode or something.
Also, sin007 I can't find any reboot to recovery from the shutdown menu, though I flashed a stable version of CM 9.1 and not a "nighty version". Could that be the reason? But no biggie, CM 9.1 comes with rom manager.
Finally I wouldn't mind any tips you guys have on making the most out of the ROM.
Thanks and all the best.
Shutdown menu - Reboot - Recovery
OK?
There is an APP on google play, sgs kernel flash, it is easier and faster than Odin. And works perfectly. I've flash the speedmod kernel and finally upgrade to cyanogenmod 9.1.
Anyone knows if this APP works on galaxy s2 (i9100)?
Thankss
Sent from my Nexus 7 using xda app-developers app
O-T said:
Shutdown menu - Reboot - Recovery
OK?
Click to expand...
Click to collapse
Oops sorry, didn't bother pressing the reboot button, typical noob error. Thanks OT.
I have a problem though, I just discovered my phone's imei number has changed after I flashed cyanogenMOD 9.1. How is this possible and how do I get back my original imei number?. Thanks.
xtome said:
I just discovered my phone's imei number has changed after I flashed cyanogenMOD 9.1. How is this possible and how do I get back my original imei number?. Thanks.
Click to expand...
Click to collapse
read this http://forum.xda-developers.com/showthread.php?t=1857054 and solutions for it on My Android Solutions, link below
xsenman said:
read this http://forum.xda-developers.com/showthread.php?t=1857054 and solutions for it on My Android Solutions, link below
Click to expand...
Click to collapse
Thanks xsenman, you're a lifesaver. Love all ur posts, really useful to have. Thanks again and also a big thanks to all who helped out.
Cheers everyone.
Hi guys. I got a real weird problem or so.
I was on a kingdroid rom based on 4.0.4.
Everything ok, no problems, until I turn off the cellphone to take the SD card. From that moment my note just dont turn On.
The thing is I was able to go in to recovery (nice), so I flash a safe kernel. All ok.
And then after a full wipe I tried to flash a rom, and here is the weird stuff: After flash any rom, the cellphone go into restart, everything is new but surprise, am still in Kingdroid v7, even when I flash a 4.1.2 based rom.
I tried many many times, and always the same. I can´t flash a new rom.
My kernel is the Philz one.
Hope someone knows what is happening.
Did you wipe data dalvik cache? If you still have issues you can wipe /system before flashing new ROM (recommended)
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
Did you wipe data dalvik cache? If you still have issues you can wipe /system before flashing new ROM (recommended)
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I can full wipe, and format/data, but when I try Fromat/system, recovery get freeze. :/
You mean Format/system, right?
So weird. Every time, the same, am stuck in Kingdroid. :S
It concerns me that you can't wipe /system
Hopefully someone can chime in here
you can try flashing from diffrent CMW recovery version.. try flashing speedmod 3-15 and reboot recovery and try to fullwipe and install..
i had weird problem when using diffrent CMW like abyss. i had quite similar problem..
try Speedmod 3-15. it is safe and flash speed is faster
asf58967 said:
It concerns me that you can't wipe /system
Hopefully someone can chime in here
Click to expand...
Click to collapse
mmm.
When I try format/system, recovery freeze and the phone restarts. And the Rom is formatted, so I have to put all my info again (select lenguaje, config wifi, config google account, etc). And still in kingdroid.
mistajoe83 said:
you can try flashing from diffrent CMW recovery version.. try flashing speedmod 3-15 and reboot recovery and try to fullwipe and install..
i had weird problem when using diffrent CMW like abyss. i had quite similar problem..
try Speedmod 3-15. it is safe and flash speed is faster
Click to expand...
Click to collapse
Never think on that. Will try. Thanks
That is a great idea try speed mod
Sent from my GT-N7000 using Tapatalk 2
I tried Speedmod kernel, full wipe, flash alliance rom and after restarts, Kingdroid again.
The only thing that change was the kernel. So i have Philz again.
I will try with another kernel.
Is like to have a briked note
You may want to try flashing stock gingerbread (pre rooted from dr.ketan) from PC Odin...
I had some weird issues once and it reset me..
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
You may want to try flashing stock gingerbread (pre rooted from dr.ketan) from PC Odin...
I had some weird issues once and it reset me..
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Yep. I will do that.
now I lost recovery.
The phone just get to "samsung galaxy note gt-n7000" and stay there.
I can go on donwload mode, so I will try to flash a stock rom.
Thanks guys. I will report tomorrow with news. Hope works.
Do that stock GB (pre rooted) though not ICS...in PC Odin... that way when you wipe you can do it safely in stock setup without having a custom kernel...
Then just flash whatever with Mobile Odin
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
You may want to try flashing stock gingerbread (pre rooted from dr.ketan) from PC Odin...
I had some weird issues once and it reset me..
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
try this method.. it might worked.
May be your downloaded new rom corrupt
Sent from my GT-N7000 using xda premium
dsmas said:
May be your downloaded new rom corrupt
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I tried with four different roms.
So I tried with Odin, with no problems in the process, but when the phone restarts just get to "samsung galaxy note gt-n7000" and stay there.
Now even the batterie freeze
are you sure that the Odin flash was successful?
if yes, the now try to boot into recovery and do a factory reset, reboot again
Ok. good news. I tried a few times with the GB pree rooted of dr.ketan, with no positive results. So I tried with a diferent one, from sammobile. Is a stock from my country. This one works.(a little hope). Well, now the phone is crazy. super unstable. But, is something.
nokiamodeln91 said:
are you sure that the Odin flash was successful?
if yes, the now try to boot into recovery and do a factory reset, reboot again
Click to expand...
Click to collapse
Yep. Odin flash was successul. With green colors and all. But at restarts the phone was freeze and no chance to get recovery mode.
As I say in previus post, now the phone turns on,but is unstable. Is a stock GB rom.
I get a lot of error messages like:
Android.proces.acore has stoped.
com.android.phone has stoped.
So the phone is unusable
ok great.. this is the time when you HAVE to somehow get into the recovery mode and do a factory reset.. coming from a ics rom will give these errors.. just needs a wipe
nokiamodeln91 said:
ok great.. this is the time when you HAVE to somehow get into the recovery mode and do a factory reset.. coming from a ics rom will give these errors.. just needs a wipe
Click to expand...
Click to collapse
Ok. I flashed the Pre-rooted again, and now I am in recovery mode. OMG xD
Question. IS safe to do a full wipe in this kernel? or do I flash a safe kernel, like speedmod??
Am gonna search a new religion to believe or something after this.
Edit: Ok, after think about it I did it a full wipe. (I am on gb so no problems)
The phone is OK. fully working!!! omg guys. Thanks so much!
Am gona do a resume of my problem, maybe gonna be of help for someone.
Got CyanogenMod 10.1.2 on my i9000 but want to go back to Darky 11 black edition because it's still the best fully loaded Rom for the i9000.
Tried the full wipe, and mounts, followed by flashing the DarkyRom, but it keeps failing and going back to Cyan.
How can I get Darky back please?
Hey
Did u take a backup of darky Rom?
Also what's the error u get?
Sent from my GT-I9300 using xda app-developers app
What errors did you get ??? some screenshots would help....:good:
Didn't do a back up of Darky bacause I've tried a few Roms since then (GamerzRom was a recent one).
As for the error, it's not an error as such. I have the Darkys Rom zip and when I try to install it via Recovery, it starts "preparing" and then the phone reboots back to recovery.
Maybe I need to flash a stock rom via Odin and then go to Darky?
forcedv said:
Didn't do a back up of Darky bacause I've tried a few Roms since then (GamerzRom was a recent one).
As for the error, it's not an error as such. I have the Darkys Rom zip and when I try to install it via Recovery, it starts "preparing" and then the phone reboots back to recovery.
Maybe I need to flash a stock rom via Odin and then go to Darky?
Click to expand...
Click to collapse
Ye i think that you need to flash to stock and than Darky i had same problem and that worked for me
Have you you tried just flashing it via odin? There is a ressurection edition just for this case if i remember correctly...
Sent from my GT-I9000 using xda app-developers app
forcedv said:
Got CyanogenMod 10.1.2 on my i9000 but want to go back to Darky 11 black edition because it's still the best fully loaded Rom for the i9000.
Tried the full wipe, and mounts, followed by flashing the DarkyRom, but it keeps failing and going back to Cyan.
How can I get Darky back please?
Click to expand...
Click to collapse
darky rom and cm10.1.2 have different memory partitions...old one and new....you need to flash stock 2.36 jvu via odin to change partitions then darky rom on the top of stock
Most important is that you tick repartition and that your rom is a full one (4 parts)
Sent from my GT-I9000 using xda app-developers app
sorry forgot to tell you...after flashing stock 2.36 jvu via odin to change partitions,you also need to root that stock again(and to get cwm) before flashing darkys. how to flash stock via odin? http://forum.xda-developers.com/showthread.php?t=2149455
I actually popped to phone in a draw and forgot about it.
Thank you for all the replies. Will give it a go on my next day off.
Thank again