Related
Hey all, I want to write a new image to what is currently a verygreen size-agnostic card, but Windows, EASEUS and the NC itself only see the boot partition. If I try to format it from Windows 7 x64, will it just wipe the partition, or format the whole card? Is there a way to do it from CWM?
I have:
verygreen's latest size-agnostic card running CM7.0.3 + dal's 4/24 OC kernel
the 3.1 beta running dal's 5/13 OC kernel on eMMC
the latest CWM on eMMC
EASEUS on my PC
I do not have:
another SD card
a card reader other than the NC
Obviously "get a card reader" and "get another card" are answers I could come up with myself. Do I have any options using what I have? The goal is to write racks' Phiremod/HC dual-boot to the card.
ETA: I am hesitant to attempt formatting from CM7 due to the big red letters in the dev thread for 3.1:
DO NOT FORMAT YOUR SD CARD IN CM7. DUE TO A VOLD ISSUE THIS WILL FORMAT YOUR /BOOT INSTEAD OF THE SD CARD!
****Should be fixed in nightly 13****
Click to expand...
Click to collapse
Does that still apply? Does it apply to the 7.0.3 build? Would flashing eMMC to CM7.0.3 and formatting the card be a possibility?
UPDATE [SOLVED]: As the final post says, the best method to revert a bootable card to storage seems to be, in EASEUS, deleting all partitions except the "SDcard/CM7 SDcard" partition, then dragging that partition to take up the unallocated space.
I use XP and using a USB adapter plug it in go to my computer right click on the drive which will say boot and click format. It takes about 5 seconds to format. Tou will get a warning. Not sure if it is the same with Win 7 but cannot see why it wouldn't format the same way.
Well, I did order a card reader from Amazon. This one seems like it may actually come in handy down the road and not be a one-use thing, and it should be here tomorrow. Maybe for experimentation's sake I'll do one last back-up and try formatting the card in the NC.
I can't sync my apps from Titanium + Dropbox until I get Titanium pointed at a bigger partition.
In the interest of completeness and for the unknown googler: Windows was incapable of formating any but the first partition of the card whether in the NC or a card reader. I tried "Wipe drive" in EASEUS, after which neither Windows Explorer nor the NC would recognize the card to format it. I wrote a new image to it (the HC/Ph dual boot) with WinImage, which worked fine. However, CM7 on the NC still only had access to the boot partition, and I needed more space so that I could sync Titanium Backup with Dropbox to restore my apps and settings from my old SD installation.
Again, there was no formating the partitioned card, so in EASEUS I deleted all the partitions except SDcard, extended that partition, and then formatted it in Windows. I was almost right--the last step was not only a waste of time, but rendered the card readable to Windows but not to CM7 or CWM. So, I once again wrote an image to the card, deleted all the other partitions, extended SDcard to to take up the unallocated space, and then jammed the card in the NC: success!
And Titanium Backup FCed whenever I tried to sync to Dropbox :/
Well, so be it. I manually replaced the Titanium Backup folder on the SD card with the one from my Dropbox, and it's almost done restoring now #knockonwood
Hi,
I just got myself a Nook Color with version 1.2 update and I am planning to root the device from a microSD Card with CM7 or Honeycomb. But before I start, I have two basic queries:
1. Which rooting will give a better and stable web browsing experience - CM7 (Gingerbread) or Honeycomb
2. Can I store and view my personal files (e.g, movies) from the microSD Card which will boot my Nook Color with CM7/Honeycomb? I am very concerned about this, as the Nook Color v1.2 comes with only 1 GB of free space for personal files storage and so I need to store my movies in mircoSD card. At the same time, I don't want to change the stock software thus violating warranty, so I have to root using a microSD card.
I am very new to this, so will appreciate your response very much. Thanks in advance.
Dazed378 said:
Hi,
I just got myself a Nook Color with version 1.2 update and I am planning to root the device from a microSD Card with CM7 or Honeycomb. But before I start, I have two basic queries:
1. Which rooting will give a better and stable web browsing experience - CM7 (Gingerbread) or Honeycomb
2. Can I store and view my personal files (e.g, movies) from the microSD Card which will boot my Nook Color with CM7/Honeycomb? I am very concerned about this, as the Nook Color v1.2 comes with only 1 GB of free space for personal files storage and so I need to store my movies in mircoSD card. At the same time, I don't want to change the stock software thus violating warranty, so I have to root using a microSD card.
I am very new to this, so will appreciate your response very much. Thanks in advance.
Click to expand...
Click to collapse
1. Without a doubt cm7. Honeycomb will unfortunately be forever buggy.
2. Yes you can use the left over storage on your SD card for files, music, videos, app etc.
And FYI you can root the internal memory and if you need to return for warranty then you can just return to stock and b&n will not know a thing but if you are going to run off the SD card make sure that it is a sandisk.
Sent from my NookColor using Tapatalk
The thing to remember if you want to access the 4th partitiion for storage is that you have to do it while the SD is in the NC. Win xp will only see the first partition which has only about 155 megs.
Thanks a ton! I have few more quick questions.
1. What is the most stable CM7 version for rooting 1.2 version Nook Color as of today?
2. Will the rooted nook be able to play AVI video files? What app I need to download for that?
3. I found that PDF page load is very slow in my Nook Color. What app do you suggest for a good reading experience?
Once again, thanks in anticipation.
1. 7.0.3 is the latest stable version of CM7, however, most people keeps up-to-day with nightly builds.
2. it should, if not, install Rock Player Lite, it plays virtually everthing
3. Either Adobe Reader or Alkido would do the job
Not able to copy files to uSD card which boots CM7
Hey thanks for your all your support. I was able to install CM7.0.3 on my 1 GB uSD card and also installed Adobe Reader and Moboplayer. Everything works fine, except when I connect my NC to my PC, and then turn on USB Mass Storage on NC, I can only explore my Nook Color (showing as F: drive) to copy files. I cannot open/explore my SD card, though the PC shows the uSD card as "Removable Disk (E. When I try open this E: drive, I get the message "Please insert a disk in E: drive".
Also, my NC does not seem to identify the SD card. When I go to Settings -> Storage, it shows total space unavailable under SD card. Even when I open Moboplayer, I get the message "There is no SD card, make sure it is usable". I could only play videos copied to my NC internal memory.
I was told that I can use the leftover space of the uSD card to copy personal files, but I have no success on that front yet :-(. Any idea/suggestions how to fix this issue?
More information:
In my NC Storage Settings, it shows:
1. SD card: Total space unavailable, Available space unavailable.
2. Internal storage: Total space 525 MB, Available space 449 MB
3. Additional storage (emmc): Total space 1 GB, Available space 63.51 MB
Wondering what is 2nd one (Internal storage)? Is that the data partition of my SD card? If yes, how can I copy personal files there?
Did you say you are using a 1GB uSD? IMO, that's way too small for what you want to do. I would recommend either a 4 or 8GB sandisk card to allow you enough space for files and the OS. Remember that this is also your boot disk and the cm7 files are taking up most of the available space on a 1GB card. Just sayin......
Sent from my NookColor using Tapatalk
I have ordered for a 16 GB class 4 SanDisk uSD card. I had a 1 GB uSD card at hand, so wanted to test with that first before I receive the 16 GB card. And as I said, I had no prob at all installing CM7.0.3 on the 1 GB card and if I am not wrong the card still has hunderds of MB memory free. My question is why can't I explore the SD card when I connect my NC to PC thru' the USB cable?
Dazed378 said:
I have ordered for a 16 GB class 4 SanDisk uSD card. I had a 1 GB uSD card at hand, so wanted to test with that first before I receive the 16 GB card. And as I said, I had no prob at all installing CM7.0.3 on the 1 GB card and if I am not wrong the card still has hunderds of MB memory free. My question is why can't I explore the SD card when I connect my NC to PC thru' the USB cable?
Click to expand...
Click to collapse
I don't recall the specific partition sizing of SASD but I would suspect there is no space available on the uSD after SASD creates the first 3 partitions... thus no partition 4 to be mounted as /sdcard.
Ok, thanks. As a mentioned in couple of posts back, any idea what is the "Internal Storage" of 525 MB total space that shows up in my storage settings? It is different from the emmc storage, because that shows up as the third storage option with 1 GB total space.
Ok - just found this thread and had to ask:
I'm running a stock 1.3 on the eMMC, and CM7.1 on a 16G micro-SD.
When I boot into the stock ROM, I see that my SD is mounted, but that the stock ROM mounted the /boot partition, rather than the /SD Card partition.
Is there a way to set the stock rom to boot /SD Card, or hide the other three from it?
Thanks!
traumadog said:
Ok - just found this thread and had to ask:
I'm running a stock 1.3 on the eMMC, and CM7.1 on a 16G micro-SD.
When I boot into the stock ROM, I see that my SD is mounted, but that the stock ROM mounted the /boot partition, rather than the /SD Card partition.
Is there a way to set the stock rom to boot /SD Card, or hide the other three from it?
Thanks!
Click to expand...
Click to collapse
To my knowledge, no, you cannot make the stock OS see any but the boot partition of the SD card. Both stock and your CM7 card can access eMMC storage, but stock can only see the first partition of your card. If you want a stock and a CM7 installation to share one /sdcard partition, you will have to set up a dual boot on internal storage (mine is linked in my sig).
If you just want to have some SD storage available to your stock install, you might be able to stretch the card's /boot partition and store some files in there, but I don't know if your SD install would remain stable. You could always back up your card as a disk image and try it out.
Taosaur said:
To my knowledge, no, you cannot make the stock OS see any but the boot partition of the SD card. Both stock and your CM7 card can access eMMC storage, but stock can only see the first partition of your card. If you want a stock and a CM7 installation to share one /sdcard partition, you will have to set up a dual boot on internal storage (mine is linked in my sig).
If you just want to have some SD storage available to your stock install, you might be able to stretch the card's /boot partition and store some files in there, but I don't know if your SD install would remain stable. You could always back up your card as a disk image and try it out.
Click to expand...
Click to collapse
I would also like to know the answer for how to make the /boot partition larger on various images to allow sufficient room when booted from eMMC. I tried doing this with EASEUS Partition Master but it will not let me resize the boot partition. Any other options to solve the issue? The only other options is to swap cards when you know you are booting off eMMC and that is a pain.
hikersc said:
I would also like to know the answer for how to make the /boot partition larger on various images to allow sufficient room when booted from eMMC. I tried doing this with EASEUS Partition Master but it will not let me resize the boot partition. Any other options to solve the issue? The only other options is to swap cards when you know you are booting off eMMC and that is a pain.
Click to expand...
Click to collapse
What are you trying to accomplish?
What is your running system?
Why do you want to expand the boot partition?
votinh said:
What are you trying to accomplish?
What is your running system?
Why do you want to expand the boot partition?
Click to expand...
Click to collapse
Sorry, I guess that I could have been more clear in what I am trying to do. I have a rooted nook color 1.1. I burned the image for the dualboot phiremod/Honeycomb that is approximately 3.5 Gb. I burned it to an 8 Gb card and then expanded the 7th (/sdcard) partition to use the space which is available when booted to phiremod. When I boot (with the card installed) to eMMC via J4mm3r's u-boot menu, my rooted 1.1 comes up but sees the /boot partition as the SD card. Since it is the /boot partition, it only has 80 Mb free which is not enough for Titanium Backup, etc. If I could make the /boot partition larger (say 2 Gb) then everything would work as desired.
1. I don't use dual boot option so can't help you
2. I don't use either Phiremod nor Honeycomb so can't help you but
a. I think the NC should still the left-over of the uSD card. if not
b. Try using MiniTool Partition wizard to expand the boot partition and see what happens. Not so sure if it allowed to do so.
hikersc said:
Sorry, I guess that I could have been more clear in what I am trying to do. I have a rooted nook color 1.1. I burned the image for the dualboot phiremod/Honeycomb that is approximately 3.5 Gb. I burned it to an 8 Gb card and then expanded the 7th (/sdcard) partition to use the space which is available when booted to phiremod. When I boot (with the card installed) to eMMC via J4mm3r's u-boot menu, my rooted 1.1 comes up but sees the /boot partition as the SD card. Since it is the /boot partition, it only has 80 Mb free which is not enough for Titanium Backup, etc. If I could make the /boot partition larger (say 2 Gb) then everything would work as desired.
Click to expand...
Click to collapse
Mmm, I think you maybe just need to make up your mind, or deal with the limitations--have your cake or eat it, because you can't do both. That said, I see no reason EASEUS wouldn't let you expand the boot partition, unless there's just no unallocated space, in which case you need to shrink your storage partition first. I don't know whether your card would boot properly with an expanded boot and random files in there, but you should be able to move the partitions around just fine.
Still, your better bet is to decide what's going to be your primary OS and stick with it. You can even dual-boot from eMMC and have two full OSes, but as long as you're using the SD as a boot drive, you're going to be trading off its ability to serve as storage for your interal OS.
Edit: sorry, didn't realize how old the thread was...was trying to find my info with the forum search. ^^;
In the original post the user asked if you could use the microSD for both booting/rooting and for storage -- when I tried this, I got a "SD Card must be formatted" error in my rooted Nook. I let it rty to format the card (then let Windows format it) and -then- I was able to store on the SD card.
But when I rebooted my Nook Color, it got stuck Infinite-looping the Nook Color splash screen. =\
I'm about to root it again, and I'd like to use the same SD card I use to root to have some storage space on it. I (had) a 4GB microSD card, but because the slot is in the worst place it could possibly be on the device...I've already managed to get it wedged inside the casing. =\ The drive still works but I'd rather not have to worry abotu swapping cards in and out and in and out; maybe I have fatter fingers than It hink, but that SD card slot is a pain in my arse.
What did I do wrong my first go 'round? I had a 4GB card, so I used the 4GB CWM image for it. Is it...really simple, and I need to format it into two partitions in windows; set 1GB aside for the CWM boot disc and the other 3GB would be available for file storage?
1. use SD formatter
2. if you used a 4GB CWM image, did you manually update it to the latest build? If not, just grab the 1GB image in the quote at the top of this thread: updated CWM. If you're planning to wipe it right after, it doesn't matter how big it is.
Also, regarding the OP and my response, I later found this link I'd saved about pointing stock to the storage partition of a CM7 SASD card: http://forum.xda-developers.com/showpost.php?p=13668471&postcount=529
I haven't tried it or seen anyone report back after trying it, but there it is if anyone wants to give it a go.
Hi,
I just changed the mounting of the sdcard and emmc to be reversed. As far as I understand, the sdcard is "usually" the internal sd, and emmc is "usually" the external sd.
The biggest issue I faced was that everytime I reboot my phone, I'll have to remove and reinsert the sd card so that the sdcard is detected by the phone. After I swapped the mounting, everything went well. Is there a reason why the devs use the scheme?
Thanks
EDIT: I'm seeing this on CM nightly 204
haven't use nightly 204 but in stable CM7, there is an option called 'Use Internal Storage' under setting menu 'CyanogenMod Settings'->'Application', check it then internal sdcard would be mount as /sdcard.
Hmm... That's a good option.
Just wondering why the it is not checked by default.
I didn't have sd inserted at first, so *nothing* is working. Camera complains, installing apps failed, etc.
CyanogenMod reverses the sd and emmc mountain as the internal sd is rather small and external is typically larger. They do this since many apps do not offer a way to switch storage location. It is possible to switch them back and there is a tread on it but since I'm on mobile I really can't link to it right now.
Sent from my LG-P999 using Tapatalk
I see, that made sense... Yes, option to swap it back is mentioned by hkkp.
But I still think it should default to sd as internal sd, emmc as external flash. Let user make the switch if they wishes to...
thloh85 said:
Hi,
I just changed the mounting of the sdcard and emmc to be reversed. As far as I understand, the sdcard is "usually" the internal sd, and emmc is "usually" the external sd.
The biggest issue I faced was that everytime I reboot my phone, I'll have to remove and reinsert the sd card so that the sdcard is detected by the phone. After I swapped the mounting, everything went well. Is there a reason why the devs use the scheme?
Thanks
EDIT: I'm seeing this on CM nightly 204
Click to expand...
Click to collapse
i use nightly 204, and didn't happen like you did. i prefer external sd card is default and internal to be external. because external sd is bigger then internal one and faster i use class 10
antec123 said:
i use nightly 204, and didn't happen like you did. i prefer external sd card is default and internal to be external. because external sd is bigger then internal one and faster i use class 10
Click to expand...
Click to collapse
Odd... Must be some dirty data during flash. Could you check this out?
1. Go to Terminal / adb to the phone
2. type "cat /etc/vold.fstab" without the quotes
3. paste the output here
Could you also check if "Settings->Cyanogenmod Setting->Applications->Use Internal Storage" is checked by default?
If anyone gained success in moving apps from internal storage to expandable memory card :good:
goldenlark said:
If anyone gained success in moving apps from internal storage to expandable memory card :good:
Click to expand...
Click to collapse
The GAAPS installed and OTA off using Cyanogen Mode thought not rooted but can sideload apps
goldenlark said:
If anyone gained success in moving apps from internal storage to expandable memory card :good:
Click to expand...
Click to collapse
Stock does not have the option to use Apps2sd. But why would you want too? Stock basically has unlimited app storage space as long as you do not load up your internal media SD with media files.
Or were you meaning that you wanted to move apps installed on stock to your SD installation of CM? Apps2SD does not accomplish that. You must manually copy them from stock to CM.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Stock does not have the option to use Apps2sd. But why would you want too? Stock basically has unlimited app storage space as long as you do not load up your internal media SD with media files.
Or were you meaning that you wanted to move apps installed on stock to your SD installation of CM? Apps2SD does not accomplish that. You must manually copy them from stock to CM.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Hi Larry hope you doing good. I am running CM10 on my nook HD+ thus could sideload apps but I didnt rooted it (Following the thread http://forum.xda-developers.com/showthread.php?t=2062613 performed the point 1. and 3. and skipped 2.) . I installed certain games like NFS: Most Wanted which are extremely big almost 2 GBs and so others. Is it possible that if I can move them on the external SD card as they are currently installed on the inbuilt memory.
goldenlark said:
Hi Larry hope you doing good. I am running CM10 on my nook HD+ thus could sideload apps but I didnt rooted it (Following the thread http://forum.xda-developers.com/showthread.php?t=2062613 performed the point 1. and 3. and skipped 2.) . I installed certain games like NFS: Most Wanted which are extremely big almost 2 GBs and so others. Is it possible that if I can move them on the external SD card as they are currently installed on the inbuilt memory.
Click to expand...
Click to collapse
You are talking a little apples and oranges (stock and CM10).
If you followed the instructions in that thread, you installed those things to stock, as that is what those zips do.
CM10 is already rooted. If you wanted gapps on CM10, you needed to flash the gapps-jb-20121011-signed.zip from goo.im. Use the CWM from the SD install to install them.
If you installed that game on stock, then what I said earlier about internal memory still applies. It has a huge area to install apps. No need to use Apps2sd.
If you installed the game to CM10, then the app is installed on the SD /data partition. But that is only 2GB. So that game would have trouble with CM10. But CM10 has apps2sd built in and you can move the game from the SD /data partition to the SD CM10SDCARD partition. Just go to settings, applications and pick that app and say to move to SD. It will move it from what it calls internal memory (but is really the SD /data partition), to SD (which is really the CM10SDCARD partition).
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
You are talking a little apples and oranges (stock and CM10).
If you followed the instructions in that thread, you installed those things to stock, as that is what those zips do.
CM10 is already rooted. If you wanted gapps on CM10, you needed to flash the gapps-jb-20121011-signed.zip from goo.im. Use the CWM from the SD install to install them.
If you installed that game on stock, then what I said earlier about internal memory still applies. It has a huge area to install apps. No need to use Apps2sd.
If you installed the game to CM10, then the app is installed on the SD /data partition. But that is only 2GB. So that game would have trouble with CM10. But CM10 has apps2sd built in and you can move the game from the SD /data partition to the SD CM10SDCARD partition. Just go to settings, applications and pick that app and say to move to SD. It will move it from what it calls internal memory (but is really the SD /data partition), to SD (which is really the CM10SDCARD partition).
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Okay I think I am getting little confused. I am not running CM10 on my Nook HD+. What I did actually is or have is (http://forum.xda-developers.com/showthread.php?t=2062613): following this thread I entered into Clockworkmod (CWM) Recovery and then flashed (Gapps/Play Store + Extras (rev2 - 2/3/2013) ) into CWM.
Thats all. I didnt flash the zip for rooting the device. Now I have access to the file browser and permission to install apks. And I am using it happily. But when I install the apk it gets installed in the device internal memory, the 32GB model. Thus it gets installed there but not to the external 16 GB memory card that I have inserted.
Going to the application manager doesnt shows with the option to move it to SD card. This is what I see. I am attaching the screenshot for so to avoid confusion.
goldenlark said:
Okay I think I am getting little confused. I am not running CM10 on my Nook HD+. What I did actually is or have is (http://forum.xda-developers.com/showthread.php?t=2062613): following this thread I entered into Clockworkmod (CWM) Recovery and then flashed (Gapps/Play Store + Extras (rev2 - 2/3/2013) ) into CWM.
Thats all. I didnt flash the zip for rooting the device. Now I have access to the file browser and permission to install apks. And I am using it happily. But when I install the apk it gets installed in the device internal memory, the 32GB model. Thus it gets installed there but not to the external 16 GB memory card that I have inserted.
Going to the application manager doesnt shows with the option to move it to SD card. This is what I see. I am attaching the screenshot for so to avoid confusion.
Click to expand...
Click to collapse
And this SD card listed in the screenshot is actual Nooks Memory but not that of external SD card. The apps are treating device internal memory as the SD card memory
Well, as I have said to you many times, stock does not have apps2sd capability. But it can use most of that 32GB to install that huge app. As long as you have not loaded up your media sdcard with media files, you should have plenty of room. If you have it loaded up, move some of that to external sdcard.
Edit: some apps are hard coded to try to install to SD with apps2sd. That may be the issue (Edit: it is not). It definitely says it loaded it to SD (edit: not). One thing you could try is my swap SD zip so that the external SD becomes SDCARD.
And your third post said you were running CM10.
Edit2: that SD card number just means that it has 2GB of data that it uses on sdcard, not that it is installed to sdcard. The app itself is only 30MB. So if you do not want the app using 2GB of your internal media file space, do the swap I mentioned above.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Well, as I have said to you many times, stock does not have apps2sd capability. But it can use most of that 32GB to install that huge app. As long as you have not loaded up your media sdcard with media files, you should have plenty of room. If you have it loaded up, move some of that to external sdcard.
Edit: some apps are hard coded to try to install to SD with apps2sd. That may be the issue (Edit: it is not). It definitely says it loaded it to SD (edit: not). One thing you could try is my swap SD zip so that the external SD becomes SDCARD.
And your third post said you were running CM10.
Edit2: that SD card number just means that it has 2GB of data that it uses on sdcard, not that it is installed to sdcard. The app itself is only 30MB. So if you do not want the app using 2GB of your internal media file space, do the swap I mentioned above.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
I think I understood it. Thanks man. But if i perform a swap by flashing sd card zip. Will I be able to install in future the apps on internal memory or will this capability be gone forever? and in future after performing this flash, I can only install apps on external sd card. ?
goldenlark said:
I think I understood it. Thanks man. But if i perform a swap by flashing sd card zip. Will I be able to install in future the apps on internal memory or will this capability be gone forever? and in future after performing this flash, I can only install apps on external sd card. ?
Click to expand...
Click to collapse
The swap has nothing to do with where the apps get installed. You misunderstand. They still always get installed to internal. All this changes is where the apps store their data. By default apps install their data (media files and helper data files like that app does) to SDCARD. And on stock, SDCARD is the internal sdcard. The external SD is called ext_sdcard and apps don't use it. All my swap does is make the external card be SDCARD and the internal sdcard be ext_sdcard.
So if you uninstall that app, do the swap, reboot, then reinstall the app, the 30MB app still gets put on internal and the 2 GB of helper files get put on your external SD.
If you want to understand how the swap changes things, go to my HD/HD+ Tips thread and read about it.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
The swap has nothing to do with where the apps get installed. You misunderstand. They still always get installed to internal. All this changes is where the apps store their data. By default apps install their data (media files and helper data files like that app does) to SDCARD. And on stock, SDCARD is the internal sdcard. The external SD is called ext_sdcard and apps don't use it. All my swap does is make the external card be SDCARD and the internal sdcard be ext_sdcard.
So if you uninstall that app, do the swap, reboot, then reinstall the app, the 30MB app still gets put on internal and the 2 GB of helper files get put on your external SD.
If you want to understand how the swap changes things, go to my HD/HD+ Tips thread and read about it.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Ohhh yesss. I think I understood it thanks friend
leapinlar said:
Stock does not have the option to use Apps2sd. But why would you want too? Stock basically has unlimited app storage space as long as you do not load up your internal media SD with media files.
Or were you meaning that you wanted to move apps installed on stock to your SD installation of CM? Apps2SD does not accomplish that. You must manually copy them from stock to CM.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
So I rooted my nook hd and i have 2 questions, is there any way to move the data of my apps to my ext_sdcard now that i have rooted? I tried an app2sd app but it said my device does not have this capability. Also is your version of verygreen's CM10.1 compatible with the 7 inch nook hd? because it only sayd HDplus. Thank you, i hope you respond.
zamplifier said:
So I rooted my nook hd and i have 2 questions, is there any way to move the data of my apps to my ext_sdcard now that i have rooted? I tried an app2sd app but it said my device does not have this capability. Also is your version of verygreen's CM10.1 compatible with the 7 inch nook hd? because it only sayd HDplus. Thank you, i hope you respond.
Click to expand...
Click to collapse
When you say you have rooted your HD, do you mean you have rooted stock so that it has root access, or do you mean you replaced stock with CM10.1?
And what do you mean my version of verygreen's CM10.1? I don't have a version of CM10.1. Or did you mean my swap zip?
Sent from my BN NookHD+ using XDA Premium 4 mobile app
@leapinlar
I'm using Unofficial Carbon JB3 on a Nook HD+ 16GB. Settings | Apps | <select app> doesn't show any option to move apps to SD.
App Mgr III when installed says:
The device does not have a real primary external storage, or the primary external storage is emulated.
Moving app to SD function cannot be supported by this device.
Have you seen or used the App 2 SD option on a Nook HD+?
Alternatively I'd like to use your sdcard / ext_sdcard swap utility. If I do I'd like to move everything currently in the sdcard folder to my actual external SD card. Would this be a good way of doing that?:
1) Copy sdcard contents to ext_sdcard
2) Run utility
3) Delete ext_card contents
MossyTC said:
@leapinlar
I'm using Unofficial Carbon JB3 on a Nook HD+ 16GB. Settings | Apps | doesn't show any option to move apps to SD.
App Mgr III when installed says:
The device does not have a real primary external storage, or the primary external storage is emulated.
Moving app to SD function cannot be supported by this device.
Have you seen or used the App 2 SD option on a Nook HD+?
Alternatively I'd like to use your sdcard / ext_sdcard swap utility. If I do I'd like to move everything currently in the sdcard folder to my actual external SD card. Would this be a good way of doing that?:
1) Copy sdcard contents to ext_sdcard
2) Run utility
3) Delete ext_card contents
Click to expand...
Click to collapse
Yes, follow those steps.
And app2sd positively does not work on the HD/HD+. And the reason it does not is the reason stated in the message, emulated storage. I don't know what the app would say after you ran my swap. Probably the same thing.
But be warned I have the CM10 swap set so it only will install on official CM builds.
Sent from my BNNookHDplus using XDA Premium HD app
Hello,
I'm currently running my Nook HD+ on Jellybean, using one of verygreen's boots.
(NookHDplus-verygreen-New-SD-add-bokbokan-Cyanoboot-rev0-(06.01.13) to be exact)
I'm wanting to upgrade to KitKat, because a few reviews say it provides a better experience.
So I followed the instructions here:
http://forum.xda-developers.com/showthread.php?t=2602796
It's all very familiar, and is pretty much the same exact process as I followed when I successfully did the verygreen boot above.
I've got everything loaded onto my 8GB SanDisk SD Card, it's in my Nook HD+, and I'm ready to go.
At least, that's what I thought.
I seem to be having this issue where it's not able to find my SD Card.
When I load cyanoboot universal bootloader, CWM only gives me the options to install zips from /sdcard.
Correct me if I'm wrong, but /sdcard is classified as the internal "sd card"; and the thing I'm wanting is ext_sdcard, right?
So the question is, how do I point my device in the direction of the external SD Card, so it can boot from it?
Not sure if this helps, but when I spring my SD Card out and back in, it returns the following:
/storage/ext_sdcard: Idle-Unmounted
/storage/ext_sdcard: Checking
/storage/ext_sdcard: Idle-Unmounted
I could be wrong; as I'm no programmer, or by any means a developer, but this sounds like it's recognizing the drive, but unmounting it immediately after recognition.
Thanks in advance,
Vahn
I'm definitely no expert, but looking at the link you provided, step 6 says to copy the files to the INTERNAL SD (internal memory) as the current CWM can only read the internal SD. So it seems you boot from the external SD card, but you need the files on the internal memory for it to find them?
Update:
Fixed it myself.
I just had to completely re-format the SD Card, and drag/drop the ZIP files (CWM-Recovery-Ovation, CM-11, and PA_GAPPS).
Then I restarted the Nook WITHOUT THE SD CARD, and it started recognizing external_sd.
I put the SD Card in, mounted it, loaded the zips from external, and it worked like a charm.
Since your HD+ already had CM10.x on EMMC, there is a simpler process that does not require use of an external SD card: http://forum.xda-developers.com/nook-hd/general/how-to-updating-hd-hd-internal-emmc-to-t2863171.