Related
I was wondering if anyone else was experiencing this also. Sometimes my milestones touch screen start goin all crazy an pushing buttons an sliding pages an pretty much making a huge mess.This has happened before, an it went normal after 4 to 5 hours later, an now its happening again. I did some research sayin somethin about the touch screen an its reaction to humidity an stuff, but i wasnt sure. So im hoping someone here knows what is up an can tell me what i have to do.
TONKAFORCE said:
I was wondering if anyone else was experiencing this also. Sometimes my milestones touch screen start goin all crazy an pushing buttons an sliding pages an pretty much making a huge mess.This has happened before, an it went normal after 4 to 5 hours later, an now its happening again. I did some research sayin somethin about the touch screen an its reaction to humidity an stuff, but i wasnt sure. So im hoping someone here knows what is up an can tell me what i have to do.
Click to expand...
Click to collapse
Did you have your phone plugged in to a USB charger at the time? Was it the stock charger?
no, it doesnt happen jus when its chargin, it happens randomly, an no its not a stock charger, but i dont see what that would have to do with the screen goin crazy pushing everythin
TONKAFORCE said:
no, it doesnt happen jus when its chargin, it happens randomly, an no its not a stock charger, but i dont see what that would have to do with the screen goin crazy pushing everythin
Click to expand...
Click to collapse
Well, I would suggest that you try reverting back to using the stock charger for a few days and see if that helps. Using other chargers (esp from ebay) can cause similar effects on the Milestone/Droid due to voltage variances.
ill give it a try, an let you know what happens, thing is i bought the phone alone with no stock charger, so im gonna have to check on ebay for a stock one, but thanks again
TONKAFORCE said:
ill give it a try, an let you know what happens, thing is i bought the phone alone with no stock charger, so im gonna have to check on ebay for a stock one, but thanks again
Click to expand...
Click to collapse
Well, try buying a stock one from an authorized Motorola dealer. Every since I purchased one on ebay, I always make sure my Moto chargers come in a sealed, hard plastic, package in attempt to improve authenticity (However, I'm not sure how much that buys me).
Good luck.
I get this same issue.
Unplugged or not, on various roms from stock to motofrenzy.
sometimes the screen will just become really crazy.
If i open a webpage and just hold my finger on the screen in one place it will zoom in scroll up and down, all sorts.
I verified what was happening by downloading Multitouch visualiser 2 from the Market.
A reboot always fixes the problem
Its kinda frustrating, because i know that Moto just direct you to the place of purchase and i was not the original purchaser, so i have no chance of a warranty repair.
yeah ive tried everything, its driving me up the wall, its been like this for the last 30 hours,an i cant even use the phone, this is the worst it been, it usually goes away after 5 to 6 hours , but now its jus gone crazy, an ive restarted an removed the battery countless of times
but burko, are you using a sock wall charger or a ebay or differant brand wall charger.thanks
knowthenazz said:
Well, try buying a stock one from an authorized Motorola dealer. Every since I purchased one on ebay, I always make sure my Moto chargers come in a sealed, hard plastic, package in attempt to improve authenticity (However, I'm not sure how much that buys me).
Good luck.
Click to expand...
Click to collapse
could you tell me how much the out put of volts an amps the motorola milestone wall charger is, thanks
I actually use a BlackBerry charger, as i assumed Micro-Usb would be the same for all manufactures, but as above, it does start the screen going mad, as soon as i unplug it, it stops!
Ill see if i can make it go mad without being plugged in!
Good shout Knowthenazz!
That happened with me, when the temperature degree outside is very high, I live in region the degree reach to 48degree, my phone screen goes crazy, so I think your charger make your phone very hot, so the sensitivity of your screen begin not work properly. I'm note sure, just want to share my idea.
Thanks,
well its been about 4-5 days already, an my phones touch screen still goin crazy, i thought maybe id go back, like the other times, but this time seems permanent an its extremely depressing thinkin about it cus i jus got it like a week and a half ago off a guy.ive tried countless of chargers, even my bros motorola backflip charger, an nothin. so im gonna assume its permanently gone. i would switch the digitizer but thats gonna cost money an might jus lose the entire phone, so im jus gonna throw it back on ebay an go back to my htc hero an jus wait for the milestone 2 to come out. but if anyone does find a solution please post it here. thx everyone R.I.P. MILESTONE
TONKAFORCE said:
could you tell me how much the out put of volts an amps the motorola milestone wall charger is, thanks
Click to expand...
Click to collapse
All chargers using the micro USB spec should be the exact same voltage (and different current ratings depending on the charger, although different current values shouldn't affect your screen at all). I suspect that the voltages are very close, if not generally the same, but, the voltage may slightly fluctuate (or ripple) over time, which I believe may be causing the issue. The better quality the charger, the more constant the voltage.
If I were you I'd purchase an authentic Motorola Micro USB charger, and call it a day.
Burko said:
I actually use a BlackBerry charger, as i assumed Micro-Usb would be the same for all manufactures, but as above, it does start the screen going mad, as soon as i unplug it, it stops!
Ill see if i can make it go mad without being plugged in!
Good shout Knowthenazz!
Click to expand...
Click to collapse
Glad I could help!
Not sure if this is true, but, I heard that most Motorola chargers work on Blackberry units, but, the converse isn't always the case.
well its been about a week and a half an the crazy screen thing finally stopped, i used my friends motorola backflip charger, an seems like evrything is back to normal, but now the "back" button does not work, an it really is a verry important button, so im jus hopin time will fix that button too
TONKAFORCE said:
well its been about a week and a half an the crazy screen thing finally stopped, i used my friends motorola backflip charger, an seems like evrything is back to normal, but now the "back" button does not work, an it really is a verry important button, so im jus hopin time will fix that button too
Click to expand...
Click to collapse
Glad things are returning back to normal for you with regards to the screen.
Not sure what's going on with your back button though. Hope it works itself out for you.
knowthenazz said:
Glad things are returning back to normal for you with regards to the screen.
Not sure what's going on with your back button though. Hope it works itself out for you.
Click to expand...
Click to collapse
thanks for your help knowthenazz an everyone else =]
Go to a service center asap!
Dude, use your warranty. Take it to a service center.
Mine happened the same, and I decided to send it back to motorola and just got it back yesterday.
They replaced the glass screen and the frame which surrounds the glass.
It seems they removed that plastic from behind the screen on the slider, or also replaced the slider module.
I'd guess it might be a known issue for motorola, because my phone had scratches on the glass, plus a small crack on the screen ( yeah, I know, it's gorilla glass, but I'm an orc with mobiles ), the metal frame was all dented, and they replaced it anyway, when they could just said "this is misuse, it's failing because you drop it several times, go buy another one"
I already had this issue a few months before, it got better and I decided to keep on, and then it started again and got unusable, so don't get excited about it getting better, because probably will eventually start failing again.
AdrienC said:
Dude, use your warranty. Take it to a service center.
Mine happened the same, and I decided to send it back to motorola and just got it back yesterday.
They replaced the glass screen and the frame which surrounds the glass.
It seems they removed that plastic from behind the screen on the slider, or also replaced the slider module.
I'd guess it might be a known issue for motorola, because my phone had scratches on the glass, plus a small crack on the screen ( yeah, I know, it's gorilla glass, but I'm an orc with mobiles ), the metal frame was all dented, and they replaced it anyway, when they could just said "this is misuse, it's failing because you drop it several times, go buy another one"
I already had this issue a few months before, it got better and I decided to keep on, and then it started again and got unusable, so don't get excited about it getting better, because probably will eventually start failing again.
Click to expand...
Click to collapse
thing is i bought it off anothere guy, an he was a phone dealer an it was given to him as a gift from motorola, an like it had no papers or charger or service carrier, jus the phone alone straight form hong kong. an yeah couple hours later my screen went crazy again, so its on ebay atm lol, but thanks anyways
It happened with me too. Somebody told me that was cause by sweat. So i took it to service center.
started happening to me yesterday, anyone know a fix yet?
ok so these days... i been using RA. alot probably flashing 30 times a day
because of the wifi problem.
the trackball decided to stop working
when i scroll it up it wont work.
scrolling down , left, right works.
(my phone is unlocked) <- i know it avoids the warranty.
so..i decided to take chance and call HTC about warranty
this is what im gonna tell them
that my wifi isnt working
and i didnt find it out till now cause i never used wifi, and used 3G. and recently i canceled my plan and i dont have data plan anymore
so when i tried to use wifi it didntt work , and tell them i already did hard reset and soft reset and even called my router's company and changed the setting of the router and they told me that it has to be the hardware problem of my phone
So, this is my plan
1, call HTC
2, tell them wifi isnt working and its a hardware problem
i have that strange screen touch issuse too when i hold the phone tightly and try to touch the screen it doenst work, and it thinks im touching the bottom of the screen so it goes into menu and dialer when im clicking the middle of the screen, or vibrate cause it thinks im clicking the capacitive button.
3. i'll demand a replacement, and when i send my phone back hopefully it will cover by warranty( i know unlocking the phone avoids the warranty but i know many people have succeded getting replacement eventhough their phone was unlocked)
4. when they receive mine and it turns out its not covered by warranty are they going to charge my 500 dollar.
or find out that my trackball is broke.
what things do that ask? when i call them ? did anyone go through the process? do they require credit card number and all?
bought my phone through craigs about 3 weeks ago i think
lost the number of the seller..( that son of [email protected]#@# told me everything was working when i got it the wifi wasnt working)
EDIT: should i just complain about the screen?
i doubt they're gonna test the wifi and all.
does anyone knows how they inspect their device?
in what awy do i have higher chance getting replacement without issue.
Complain about the screen not working properly which is hardware issue
complain about the wifi <--- could b cause of rooting and messing up idk..
well..i already googled it and trackball isnt covered by warranty..
i have AMOLED screen but..dont really care about if i get SLCD or not..
so just your trackball doesnt work?
just flash everything back to stock recovery partition and all, then call them and say your trackball stopped working
disgustip8ted said:
so just your trackball doesnt work?
just flash everything back to stock recovery partition and all, then call them and say your trackball stopped working
Click to expand...
Click to collapse
i already did but i heard that trackball are not covered by warranty.
It wont be a problem. I had trackball problems too and got a replacement by the end of the week. They don't care about your bootloader. Try it. It's as painless as possible. Stop worrying.
pwig said:
It wont be a problem. I had trackball problems too and got a replacement by the end of the week. They don't care about your bootloader. Try it. It's as painless as possible. Stop worrying.
Click to expand...
Click to collapse
Thank you i am going to call HTC
I'll keep you guys updated.
Update:1 nov-26-2010 , wow less than 10 min i went through the swap process, and got an email for credit card process. ..Now let's just hope they dont charge me $200 cause i rooted the phone!
eunkipark92 said:
Thank you i am going to call HTC
I'll keep you guys updated.
Update:1 nov-26-2010 , wow less than 10 min i went through the swap process, and got an email for credit card process. ..Now let's just hope they dont charge me $200 cause i rooted the phone!
Click to expand...
Click to collapse
you need to go back to stock rom. unlocked bootloader is fine, i suggest NOT sending it back without stock rom
andy2na said:
you need to go back to stock rom. unlocked bootloader is fine, i suggest NOT sending it back without stock rom
Click to expand...
Click to collapse
yup already put everything back to stock. FRG83D
update #2 nov-30 2010
got my replacement from HTC it looks like they sent me a brand new spanking phone
no dusts under the screen, no scratches what so ever, everything works perfectly
, and it looks have it has new parts(which means SLCD)
my old nexus one had dark grey-ish trackball and this one have white-ish light trackball. it looks like the notification light is brighter.
is going to send my old nexus one tomorrow or the day after tomorrow
hopefully they wont charge me.
will update soon
So they send you the replacement first? When u send ur old one do they fix it or do u keep the replacement. The vibrate on mine is screwed up so im thinking of sending it also
Sent from my Nexus One using XDA App
mac208x said:
So they send you the replacement first? When u send ur old one do they fix it or do u keep the replacement. The vibrate on mine is screwed up so im thinking of sending it also
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
When u call them, you have 2 choices, you can either do swap or do repair
in my case i did swap. they will require your credit card number
and you will have $530, pending on your credit card, you have to send it back your old n1 if you want the charge to be dropped
or you can just send your n1,which will take longer..
Rather than creating another thread for a similar issue...I am having issues with my power button. Sometimes it takes about 5 tries to get the screen to come on.
My question is, are they swapping with N1's or does the AT&T version get something else? I have heard about someone receiving a Captivate instead and I do not want a branded / locked phone.
eunkipark92 said:
update #2 nov-30 2010
got my replacement from HTC it looks like they sent me a brand new spanking phone
no dusts under the screen, no scratches what so ever, everything works perfectly
, and it looks have it has new parts(which means SLCD)
my old nexus one had dark grey-ish trackball and this one have white-ish light trackball. it looks like the notification light is brighter.
is going to send my old nexus one tomorrow or the day after tomorrow
hopefully they wont charge me.
will update soon
Click to expand...
Click to collapse
just a question, why do people dislike the SLCD version vs the AMOLED? Isnt SLCD better with battery life and easier to see in sunlight?
andy2na said:
just a question, why do people dislike the SLCD version vs the AMOLED? Isnt SLCD better with battery life and easier to see in sunlight?
Click to expand...
Click to collapse
AMOLED produces more vibrant and richer colors and SLCD creates a sharper picture and a warmer tone,
as far as i know amoled is a little bit better in sunlight, not by much. Its not the screen but its how htc makes thier glass.its like glossy and stuff)
and no amoled have better battery life
eunkipark92 said:
AMOLED produces more vibrant and richer colors and SLCD creates a sharper picture and a warmer tone,
as far as i know amoled is a little bit better in sunlight, not by much. Its not the screen but its how htc makes thier glass.its like glossy and stuff)
and no amoled have better battery life
Click to expand...
Click to collapse
yea, I JUST read the article on engadget comparing the Desire's Amoled vs SLCD:
http://www.engadget.com/2010/09/13/spot-the-difference-htc-desires-slcd-versus-amoled/
I hope I dont have to send mine in now :/
andy2na said:
yea, I JUST read the article on engadget comparing the Desire's Amoled vs SLCD:
http://www.engadget.com/2010/09/13/spot-the-difference-htc-desires-slcd-versus-amoled/
I hope I dont have to send mine in now :/
Click to expand...
Click to collapse
its ok most people cant tell the difference unless its side by side
i cant tell the difference..
update #3: dec-02-2010
i have sent out my old nexus one to HTC
and i just got a mail from them saying they have received my n1 and is in process of inspecting
we'll see how it goes, hopefully they wont charge me
update #4
service is complete. they didnt charge me
update #5 dev-04-2010
sold my nexus one now have mytouch 4g. bye guys
OK well i was installing Darkys latest rom. I was at the point where i was in
download mode and odin. While odin was loading files the usb slipped out of the
phone because nothing besides the stock usb cord happens to stay firmly in the
charging port on this phone. This is the 2nd time this happed but when it
happened this time my phone just stopped working and by stop working i mean i
get absolutely no picture on the screen. nothing happens when its plugged into
power cord or usb cord. nothing. tried holding all 3 buttons in tons of times and
nothing.
Im out of warranty and got no insurance. I did get att to give me 180 credit cuz
i threatened to cancel. so if i cant fix this im gonna use a crappy prepaid phone
for the time being. If the SGS2 doesnt come out by march then ill probably get
an axtrix even tho i would rather get SGS2.
So please does anyone know of anything i can try?? i'm probably gonna goto an att store and try a new battery. Any suggestions would be appreciated???
You tried pulling everything, plug in usb, hold rocker, put back in batt? My understanding is, if you have the bad luck of that cable coming out while loading the boot loader then you r indeed SOL.
Sent from my Inspire '4g'.
Buy or make a jig
Double spacing isn't necessary. We aren't going to grade your post.
You hopefully now understand that flashing to stock isn't the way to avoid problems; it's the way to create big ones.
Try removing the battery, wait a couple of minutes, plug in USB, hold volume up+down, while holding up+down insert the battery and see if that gets you back into download mode.
hololight said:
You tried pulling everything, plug in usb, hold rocker, put back in batt? My understanding is, if you have the bad luck of that cable coming out while loading the boot loader then you r indeed SOL.
Sent from my Inspire '4g'.
Click to expand...
Click to collapse
I tried all that. Ive probably flashed every single rom in the development section of the forum.
If it gets unplugged while doing an update then usually it displays the phone..!..computer picture and you can still get into download mode from there. I'm getting nothing tho.
the reason i think it could be the battery is because it may have been pretty close to dying which is stupid for flashing when it was close to dead but i wanted to hurry up because i had to leave the house. i'm wondering if since the software on there now is corrupt would that make the phone unable to charge. thats why i want to try a new battery
opcow said:
Double spacing isn't necessary. We aren't going to grade your post.
You hopefully now understanding that flashing to stock isn't the way to avoid problems; it's the way to create big ones.
Try removing the battery, wait a couple of minutes, plug in USB, hold volume up+down, while holding up+down insert the battery and see if that gets you back into download mode.
Click to expand...
Click to collapse
just tried what you recommended and nothing happened. tried it a few times. Thanks for helping. I really hope the SGS2 comes out in march. I am not wasting my upgrade on an old phone and i dont really want the atrix
mcord11758 said:
Buy or make a jig
Click to expand...
Click to collapse
would a jig really help me in this situation???
I don't think a jig will help. Usually it is used when your buttons never worked.... but hey... only a couple bucks vs the cost of a new phone.
Sent from my Inspire '4g'.
hololight said:
I don't think a jig will help. Usually it is used when your buttons never worked.... but hey... only a couple bucks vs the cost of a new phone.
Sent from my Inspire '4g'.
Click to expand...
Click to collapse
yeah i know my buttons work, i just cant get my phone to turn on at all. also tried multiple chargers and usb cables. I think i'm screwed. im hoping someone on here heard of this problem before but ive never read anything about it on here before.
Using a POS phone till the SGS2 comes out is gonna suck
anyone know anything?
I will be trying another battery today.
Besides a jig, I have nothing else for you sorry.
But on a different spectrum, if you do get a new phone, dont get the atrix, it is the worst phone out of all the phones coming out on att. Get the inspire our the infuse if you dont want to hold a dinner plate to your head.
Sent from my SGH-I897 using XDA App
JoeyGuard said:
would a jig really help me in this situation???
Click to expand...
Click to collapse
There is no guarantee, but it certainly could
juts tried a new a battery and still nothing.
I'm now rocking a Nokia 2320.
SGS2 I guess but i think i'm gonna be waiting a long time.
this nokia is so bad i dont think im going to make it thru the end of the month
Try the jig. It can not make things worse for you and MAY actually work for your issue.
Sent from my SGH-I897 using XDA App
phone needs to be able to power on for a jig to work.
how are you out of warranty? (besides the custom rom) the phone has a 1 year warranty and it is not been on the market that long.
if the phone *happened* to be *dammaged* in a way that they would never notice AND would NEVER be able to read the memory (with out spending thousands of dollars), THEY WOULD NEVER KNOW you flashed custom rom and voided your warranty. they would try to test it, nope, broken, NEXT...
and SGS2 expected in june
Trusselo said:
phone needs to be able to power on for a jig to work.
how are you out of warranty? (besides the custom rom) the phone has a 1 year warranty and it is not been on the market that long.
if the phone *happened* to be *dammaged* in a way that they would never notice AND would NEVER be able to read the memory (with out spending thousands of dollars), THEY WOULD NEVER KNOW you flashed custom rom and voided your warranty. they would try to test it, nope, broken, NEXT...
and SGS2 expected in june
Click to expand...
Click to collapse
yeah your right i still am in warranty but 2 weeks after i got the phone i dropped it and the screen cracked but the cracks not that bad. So i cant warranty the device because the crack. I did get att to give me $180 credit on my bill. $30 of every 6 month.
Ive heard the international version of the SGS2 will be out long before the att version will be. So i might use my upgrade on an iphone 4 and then sell it and buy the international SGS2.
what do you guys think about that idea?
JoeyGuard said:
Ive heard the international version of the SGS2 will be out long before the att version will be. So i might use my upgrade on an iphone 4 and then sell it and buy the international SGS2.
what do you guys think about that idea?
Click to expand...
Click to collapse
im pretty sure thats what im gonna do. Just not sure if i should use my upgrade on the 3gs for $49 or $200 on the 4g.
What do you guys think we will get me the most profit towards the int version of SGS2??
any opinions would be appreciated.
thanks guys
My first One worked perfectly for 2 months. Then it got stolen. On the 3rd of august I bought a new one and it got replaced three times because one had a huge scratch on the screen ( I unboxed it right there at the store so the employee directly gave me another one) and the second shut down randomly! How can something like this happen?
So I got my third(!) HTC One today. I unpacked it and it just doesn't turn on. I thought maybe the battery is low (even though that should not be the case because li-po batteries should be stored at about half charge ) But even after charging it for an hour where it does only blink with the red LED it does not turn on.
Any ideas or should I just go back to the market and directly demand a replacement.
And I really can't trust the One anymore... It's hands down the most beatiful phone with awesome specs. But what if I can't make that call in a dangerous situation because HTC has no QC?
Dr. lele said:
My first One worked perfectly for 2 months. Then it got stolen. On the 3rd of august I bought a new one and it got replaced three times because one had a huge scratch on the screen ( I unboxed it right there at the store so the employee directly gave me another one) and the second shut down randomly! How can something like this happen?
So I got my third(!) HTC One today. I unpacked it and it just doesn't turn on. I thought maybe the battery is low (even though that should not be the case because li-po batteries should be stored at about half charge ) But even after charging it for an hour where it does only blink with the red LED it does not turn on.
Any ideas or should I just go back to the market and directly demand a replacement.
And I really can't trust the One anymore... It's hands down the most beatiful phone with awesome specs. But what if I can't make that call in a dangerous situation because HTC has no QC?
Click to expand...
Click to collapse
Hold down power and volume down buttons while holding the proximity sensor directly under a bright light (sounds strange but it works!). This will reboot to the bootloader, them reboot from there.
dgtiii said:
Hold down power and volume down buttons while holding the proximity sensor directly under a bright light (sounds strange but it works!). This will reboot to the bootloader, them reboot from there.
Click to expand...
Click to collapse
I'll try that. What does it do, and why could that help?
EDIT: Im trying but so far nothing happens. Is it possible that HTC sent a bricked device to the store?
Dr. lele said:
I'll try that. What does it do, and why could that help?
Click to expand...
Click to collapse
The bright light triggers the proximity sensor, kind of tells it the phone is not in your pocket and it will let it turn on.
dgtiii said:
The bright light triggers the proximity sensor, kind of tells it the phone is not in your pocket and it will let it turn on.
Click to expand...
Click to collapse
Does not seem to work. I am pretty sad I would have never thought any company could send a absolutely bricked and useless product to a customer. Unbelievable.
Dr. lele said:
Does not seem to work. I am pretty sad I would have never thought any company could send a absolutely bricked and useless product to a customer. Unbelievable.
Click to expand...
Click to collapse
That is very strange. All I can think is to let it charge more and keep trying
dgtiii said:
That is very strange. All I can think is to let it charge more and keep trying
Click to expand...
Click to collapse
Yeah, I'll let it charge overnight and hope the battery is just totally empty. But if thats the case didn't that damage the battery already?
Dr. lele said:
Yeah, I'll let it charge overnight and hope the battery is just totally empty. But if thats the case didn't that damage the battery already?
Click to expand...
Click to collapse
Should not have damaged the battery, no, lithium polymer battery should be fine. Good luck
I've had 3 One's aswell, and none of them had any software/hardware problems. I replaced them because of cosmetic issues. Sadly for me, I bought the Developer Edition and replacement of these is done through the worst company ever LetsTalk. In order to expedite the process, I had to do a "cross shipment" where I would pay the value of two phones and have a phone sent by them without returning mine first. Had to do two cross shipments because 2nd phone also had cosmetic problems and instead of them refunding me back two cross shipment values of 1299 each, they just refunded me two phone values... had to get my bank involved to get my money back.
Wow. Just wow. Maybe I was just lucky that my Desire HD was perfect. Funny thing is: How can HTC expect me to pay for a phone on August 3rd but til today I do not have the product for which I payed. This is ridiculous. I'm going on vacation on Wednesday and I can't take my phone for which I payed 18 days before because it's in repair for 2 - 3 weeks. Great... I always recommended HTC to my friends because of my Desire HD but I think everybody should skip the One. The chance of getting one that is looking okay and working is really not that high as it seems. For me it's a 1 out of 4. Get your QC done, HTC.
Dr. lele said:
Yeah, I'll let it charge overnight and hope the battery is just totally empty. But if thats the case didn't that damage the battery already?
Click to expand...
Click to collapse
charge it with Stock USB Cable and Stock Charger,
and then let it charge for 4 hours
Muhammad.Muayad said:
charge it with Stock USB Cable and Stock Charger,
and then let it charge for 4 hours
Click to expand...
Click to collapse
Still nothing. Going to the store
Dr. lele said:
Still nothing. Going to the store
Click to expand...
Click to collapse
that is your best bet
What they said: 'Oh damn, another one'
Seriously HTC?
My new one has the worst screen of all my Ones til now, but it does power on. Also there are some huge gaps between the speaker grills and the plastic band. No problem for me though, and they won't give me another replacement. So I'll have to live with it. Installing ARHD now, thread can be closed.
hey guys, so i have the newest lp bootloader, i installed microkat for testing purposes, then i saw blisspop v3.0 is out, then i downloaded, flashed and it was well over 20 minutes, so i pressed and held power button to get out of the stuck flash process, and then when i go to do power button + vol down to get into recovery it just powers off the device, i do have a low battery, and alot of the fastboot stuffs say low battery, so i left it to charge then i flashed this all + twrp 2.8.6.0:
http://forum.xda-developers.com/moto-g-2014/general/bootloader-update-t3060007
and still whe ni try to enter recovery or factory reset from the menu it just powers off
so please help me get my device booting!
@Pizza_Dox
Oh no man, thats really sad to hear
Hmmm... thats really strange , have you tried flashing a stock rom through fastboot and then installing twrp ??
metalrules321 said:
@Pizza_Dox
Oh no man, thats really sad to hear
How much battery have you let it charged to ??
Click to expand...
Click to collapse
I cant tell what % the battery is at, but last i had it at was 7% so its quite possible its very low, but the issue is theres no sure way for me to know if its charging, its hard to explain, but i have a wonky charger and to charge my phone i need to fiddle with the wire to keep it charging then i need to not touch it at all so it charges :/
@Pizza_Dox
Have you tried flashing a stock rom through fastboot , then installing twrp and bootloader?
metalrules321 said:
@Pizza_Dox
Have you tried flashing a stock rom through fastboot , then installing twrp and bootloader?
Click to expand...
Click to collapse
hmm no, i dont want all my internal storage wiped O.0 if theres a way to flash stock rom without wiping internal then ill do it
@Pizza_Dox
I always keep a backup of of internal card, so I advised it
Geez, sorry man. Thats the answer I could give to the best of my (limited) knowledge
Pizza_Dox said:
I cant tell what % the battery is at, but last i had it at was 7% so its quite possible its very low, but the issue is theres no sure way for me to know if its charging, its hard to explain, but i have a wonky charger and to charge my phone i need to fiddle with the wire to keep it charging then i need to not touch it at all so it charges :/
Click to expand...
Click to collapse
7% won't do it. You don't have an old charger laying around? Even my Motorola Bluetooth charger will charge the moto. I've got 8 or 10 old chargers and only one of those won't work.
metalrules321 said:
@Pizza_Dox
I always keep a backup of of internal card, so I advised it
Geez, sorry man. Thats the answer I could give to the best of my (limited) knowledge
Click to expand...
Click to collapse
Oh well i will start doing that soon but mtp is slow lol thanks anyways for the help!
Tel864 said:
7% won't do it. You don't have an old charger laying around? Even my Motorola Bluetooth charger will charge the moto. I've got 8 or 10 old chargers and only one of those won't work.
Click to expand...
Click to collapse
Thing is no matter what charger i use i have to fiddle it and theres no sure way if it will charge, my device now wont even boot up, i think its the battery issue but ive tried 4 chargers, all of them are the same, no sure way if my phone is charging or not... i think ill submit it to warranty, problem is i have local warranty not Motorola one, so they have different rules, they only accept devices that are not "jailbroken" (thats what the warrenty rules say, so i will see what they can do, maybe some nice talk will get me in there good books lol
@Pizza_Dox
Oh man, I seriously hope that your phone gets fixed man
We dont wanna lose a good dev
Pizza_Dox said:
Thing is no matter what charger i use i have to fiddle it and theres no sure way if it will charge, my device now wont even boot up, i think its the battery issue but ive tried 4 chargers, all of them are the same, no sure way if my phone is charging or not... i think ill submit it to warranty, problem is i have local warranty not Motorola one, so they have different rules, they only accept devices that are not "jailbroken" (thats what the warrenty rules say, so i will see what they can do, maybe some nice talk will get me in there good books lol
Click to expand...
Click to collapse
In the US Motorola warranty is void if u unlock the bootloader and root it...Which I have done...But when I needed a new screen (because of a bad pixel) they didn't care and got me a free replacement
Try calling Motorola and say "I was updating to lollipop (with 80% charge) and all of a sudden the phone went black ....Blame Motorola.....I used a similar excuse when I bricked my S3 and Samsung bought it....
Hope all goes well
Shawn5162 said:
In the US Motorola warranty is void if u unlock the bootloader and root it...Which I have done...But when I needed a new screen (because of a bad pixel) they didn't care and got me a free replacement
Try calling Motorola and say "I was updating to lollipop (with 80% charge) and all of a sudden the phone went black ....Blame Motorola.....I used a similar excuse when I bricked my S3 and Samsung bought it....
Hope all goes well
Click to expand...
Click to collapse
Haha well im going out soon to take it to the local retailer here to get it fixed, im sure they wont say no, since its not software issues, its hardware hope to get it fixed soon lol