Hello all,
I seem to have a very confusing situation at hand. My home and back keys on my Captivate (Rogers, Serendipity 5.12, 2.2 rooted) seem to be confused; that is to say, they are performing the exact same function which is that of the back key. So when I am in an app and hit the home key, it just takes me back to the previous screen (same function as the back key). I went into recovery -> advanced -> key test and much to my sad discovery, both keys had the same value of 28 (the search key had a value of 107). Does anyone know how to fix this?
Thanks!
NewbDroid said:
Hello all,
I seem to have a very confusing situation at hand. My home and back keys on my Captivate (Rogers, Serendipity 5.12, 2.2 rooted) seem to be confused; that is to say, they are performing the exact same function which is that of the back key. So when I am in an app and hit the home key, it just takes me back to the previous screen (same function as the back key). I went into recovery -> advanced -> key test and much to my sad discovery, both keys had the same value of 28 (the search key had a value of 107). Does anyone know how to fix this?
Thanks!
Click to expand...
Click to collapse
im not sure where that file is but thee is an app called button remapper and it might help.
Related
Hi i have a problem with my MDA IV Compact. I searched the forums but found no answer to my problem.
I want to do some basic button remapping and so i go to settings -> personal -> buttons and guess what. There are NO buttons listed in the buttons list.
Has anyone come across this before and if so can you help me solve it? I mean there are only few hardware buttons present in diamond its a shame not to be able to map them.
Button mapping...
The only button you can map by default is the long press of the 'dial' hardware key. This should be showing in your button list as 'Button 1(Hold)'. There is an application called GScroll available here, which lets you map the four hardware keys by touch (double tapping them). Not exactly what you're after, but it's all I can think of to help you out
thats thing. i get NO buttons on my list gscroll looks nice. too bad its not free ware. but its cheap so i may get it.
you can use dredsensor
this tool allow you to remap buttons depending on running programs
No, no, no!
Diamond CAN have its call key remapped via Windows.
I had the opposite; a glitch entry appeared in the buttons list.
I am attaching a reg-file which will bring back the call button mapping. But be careful, this comes from Windows with localization patch.
Or, you can hard reset. If MDA CIV ROM creators didn't remove it intentionally, it should be there.
Hello,
i'm looking for a replacement for AEBplus
I only need a few simple things:
left and right button - should rotate my screen, like it does when i open the keypad
ok button - task manager (or today screen from where i could start the taskmanager)
ok button (long press) - start an application
end call (long press) - lock the device (the you need to enter your password kind of lock)
What program other that AEB can do that and wont use as much CPU resources as AEB does?
you can just go to settings>buttons and assign either keft or right soft key to screen rotate, easiest way IMO
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
nurps said:
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
Click to expand...
Click to collapse
x1ButtonMapper, already tried that?
cheers
I use AEButon Plus on my X1a and I am thrilled with it. It doesn't have much (if any) negative effect on performance on mine.
Have you tried it on the X1?
Also for End Key there is a program called "Long Press End Key" I think. It is nice, and cooked into a lot of ROMs.
Hannigan174 said:
I use AEButon Plus on my X1a ...
Have you tried it on the X1?
Click to expand...
Click to collapse
hi m8, he's trying to replace it with an alternative app...as stated in #1
DrakenKorin said:
x1ButtonMapper, already tried that?
cheers
Click to expand...
Click to collapse
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Is there a way to change some of the keys directly in the registry?
nurps said:
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Click to expand...
Click to collapse
have a look here, didn't check, just searched (doing your homework btw...)
nurps said:
Is there a way to change some of the keys directly in the registry?
Click to expand...
Click to collapse
advanced config - menu (button) - more settings - key mappings
Mobile Magic doenst support the buttons i need. No longpress for End and no support for the OK button at all..that was the first program i tried.
To bad the options for the End key are grey in Advanced Conifg.
X1BC should allow for a lot more options than mx X1ButtonMapper. I think there is also a second application from the same author called X1BH or something. Check that out.
X1ButtonMapper is pretty lightweight actually. The most overhead involved will be by calling the script functionality but that is done asynchronous, meaning that X1ButtonMapper doesn't wait for the called application or script to finish - it just launches it.
I didn't remap the red and green phone buttons because they can't be easily remapped and I think they are central buttons which should keep their original functionality. I think remapping them will cause more bugs than you will gain functionality. With X1ButtonMapper you already gain enough options for the remaining keys (each with short and long press) which should be enough for most applications. You can also reassign the missing FN+key combos on the keyboard.
I did use the Tab key as Ctrl substitude because I think Tab is not important for Windows Mobile. It is substituted in most dialogs with the right/left keys so use these. You can get the original Tab function when pressing FN+Tab for the few situations where you really need it.
I am using X1ButtonMapper for a long time now and havn't had any stability issues - maybe that's the trade off for having less features.
X1Button manager somehow didnt react to my OK key. I allready have a standalone taskmanager mortscript could run but Ok didnt do anythink. Longpress of the softkeys to rotate the screen worked nicely though.
Longpress delay is a little longer than im used to but that not a big problem.
The longpress of the End key has allready a keylock function as standard setting (wich i find totally stupid because i turn the device of with the switch on top). There must be a registry setting that i could alter so it would run the password lock instead.
I will check into X1BC...
X1BC works thank you...and i like it much more than X1BM because i can setup everything to my likings, longpress timing, vibration on/off and wether i want a Control key replacement.
I could even use the panel key to lock my device if reprogramming of the end key button is not possible.
Does anyone know wich program i have to run to password lock my device? Maybe its possbile with mortscript..i should check that...
Any apps to make it open something else?
Thanks.
there are plenty
quicksettings
quickdesk
handcent sms
are a few off the top of my head
i used to have a bunch more, but i have since uninstalled after trying nearly all the apps i want to try
(these will allow you to launch them by long press. i dont know if you can replace the short press)
Pretty sure short press is not easily changed. With froyo though longpress opens Google voice commands.
Sent from my SAMSUNG-SGH-I897 using XDA App
Nice.
Thank you.
id be interested in a kernel or rom that would allow this to be changed. long press on menu opens search so why a seperate key that can be usefull as something else? can any of those apps change the short press? ive only seen long press on search and on home.
I use visual task switcher and assigned the long press of the search key to bring up a list of currently running apps. Pretty handy.
I installed "screen lock" and assigned it to screen lock to take some stress off the power button.
I don't remember where, but I found a post somewhere on how to change it, short press on mine opens camera.
Button Shortcut in the market.
Sent from my Captivate.
Dani897 said:
id be interested in a kernel or rom that would allow this to be changed. long press on menu opens search so why a seperate key that can be usefull as something else? can any of those apps change the short press? ive only seen long press on search and on home.
Click to expand...
Click to collapse
AReynante said:
I don't remember where, but I found a post somewhere on how to change it, short press on mine opens camera.
Click to expand...
Click to collapse
wow, this is an old thread, for those interested dragon remaps the key as camera launch.
can be done in button remapper. also touch jestures can be mapped as keys in galay tuner.
for people who want to get custom and dont see the otions they want in button remapper, i think the key table is in /system/usr/keylayout/s3c-keypad.kl
this is good for fixing i9000 roms (partially) when no kernel is available for those who want to try samsung gingerbread
I like the long press for google voice search. Thanks for the idea.
If you end up flashing a ROM, CM7 has a way to change the search key in the settings menu
I took a look at the system/usr/keylayout/s3c-keypad.kl file but I'm having trouble figuring it out. Anyone know how to get more info on it? Would love to map QuickDesk to it
Dani897 said:
wow, this is an old thread, for those interested dragon remaps the key as camera launch.
can be done in button remapper. also touch jestures can be mapped as keys in galay tuner.
for people who want to get custom and dont see the otions they want in button remapper, i think the key table is in /system/usr/keylayout/s3c-keypad.kl
this is good for fixing i9000 roms (partially) when no kernel is available for those who want to try samsung gingerbread
Click to expand...
Click to collapse
OK.. I have the issue, seems quite random with the Search button. Am wondering if it is related to moisture from my palm (right-handed)... not sure. Will have to try the rice trick.
Have also taken a look at the remapping option, but don't seem to have write permissions to any of the files, much less, what values to place in the file(s).
Any assistance would be appreciated on teh edit option.
BTW: Captivate with CM7.1 (and a functional GPS after a number of patch/fixes applied)
cm7 has this option.
Just wondering if anyone has started to mess around with the hardware buttons yet to change their functions? I've looked over the keypad_8960.kl file but it only contains the volume and power buttons. There are other keylayout files in that directory but im not sure which key number is assigned to the HOME button and the BACK button. I'm trying to switch long press home from "Google Now" search to "in-app search" like you caould do on Sprints Evo LTE. Any ideas?
http://forum.xda-developers.com/forumdisplay.php?f=2117
its hard i understand
any new leads on this?
So, if you were following my other thread (which I doubt anyone was since no-one offered help), I managed to fix my incredibly hard soft brick
Everything's running great now, except the menu key isn't functioning. This would be fine, except the 3dot menu xposed module is causing other problems when installed and I'm not running a CM ROM so I can't simply make it double press the home button for menu or anything like that.
So I actually need to get the menu button working, not find an alternative. I can't seem to find the number of the button tho. I know you can check with CWM but I don't have it and don't want to risk stuffing up my phone again right now because I will be relying on it pretty heavily for the next week or so. How can I remap the menu button so it can be used as the menu button if I don't know the hard key number? International S4 Active, thanks.
You can try here
http://forum.xda-developers.com/showthread.php?t=2534697. In the Aroma Installer, there's is a button fix of sorts, used on the i537 in safestrap, so we could use regular s4 roms, soomewhere else, don't remember where, the is the button .zip file, by itself.
Sent Via Smoke Signals
tiskael said:
So, if you were following my other thread (which I doubt anyone was since no-one offered help), I managed to fix my incredibly hard soft brick
Everything's running great now, except the menu key isn't functioning. This would be fine, except the 3dot menu xposed module is causing other problems when installed and I'm not running a CM ROM so I can't simply make it double press the home button for menu or anything like that.
So I actually need to get the menu button working, not find an alternative. I can't seem to find the number of the button tho. I know you can check with CWM but I don't have it and don't want to risk stuffing up my phone again right now because I will be relying on it pretty heavily for the next week or so. How can I remap the menu button so it can be used as the menu button if I don't know the hard key number? International S4 Active, thanks.
Click to expand...
Click to collapse
You should be able to flash the keys fix in the MasterPatch that @captaincado posted above. For the actual key numbers see below.
Code:
key 115 VOLUME_UP
key 114 VOLUME_DOWN
key 172 HOME
key 139 MENU
key 158 BACK
Good luck.
Just an update, I followed all the instructions, couldn't get this working. It's possible that the button just happened to physically break when I flashed the ROM but it doesn't matter, because I found All in one Gestures (link below) which I used to replace the menu button... and then every other button, plus some. It's really good, I recommend it to anyone who has trouble reaching certain button, has a broken button or would just wants to have a go at increasing speed:
https://play.google.com/store/apps/details?id=com.phoenixstudios.aiogestures&hl=en