Hi,
I'm having a problem when I hit update in the settings section on the optimus 2x.
If I try to update it gives me a notification:
Connection failed caused by athentication error.
What i did:
-Installed a different launcher
-Installed some apps
Anyone else having this problem or has a solution? Could the launcher be the problem?
Note: Update history:
Last update: Not updated
Next update check : Not updated
I'm having the same error: Connection failed caused by athentication error.
I'm from Poland, and i'm using this phone here, however i bought it in Netherlands
And i'm using stock LG Launcher and no root yet
Maybe update server is not available yet?
There aren't any updates available that's why you get that msg. Dont worry it's with all the providers, vodafone or t-mobile it doesnt matter.
Related
so, i have a german milestone, running a 2.1 serviceable non-branded german rom. the device originally had a vodafone rom.
i checked for updates today and it found an update as available, around 34mb.
i downloaded it via wifi but the update process failed, probably to the vulnerable recovery installed.
so, i've gone back to stock, and i'm trying via cable, but the software update hangs forever in the "reading configuration data". any solution for that?
can anyone else in germany verify if the update appears as available for them too?
l.e: gave up on cable update, trying hsdpa since i have no wifi available nao ; it's caled "update package" and is 32.1mb in size.
saptemai said:
so, i have a german milestone, running a 2.1 serviceable non-branded german rom. the device originally had a vodafone rom.
i checked for updates today and it found an update as available, around 34mb.
i downloaded it via wifi but the update process failed, probably to the vulnerable recovery installed.
so, i've gone back to stock, and i'm trying via cable, but the software update hangs forever in the "reading configuration data". any solution for that?
can anyone else in germany verify if the update appears as available for them too?
l.e: gave up on cable update, trying hsdpa since i have no wifi available nao ; it's caled "update package" and is 32.1mb in size.
Click to expand...
Click to collapse
any news? anyone?
32mb is quite small for an update like that... but who knows. i've just checked android-hilfe.de and motorola europe group on facebook- none of them telling anything about any update.
@saptemai- which version are you currently running anyways?
this is probably the 2.1-update1 update.
It has to be the 2.1 update-1 Version.
Maybe you haven't applies that Update to your Milestone.
I believe Motorola will announce it in Facebook, etc if Froyo will be available for download any day now.
yup, false alarm, no froyo - still shows 2.1.
however i was already running update1, which doesn't explain exactly what this update package was.
nevertheless, this thread can be closed nao. sorry if i got people's hopes up.
Just so you know, for the false hoping...
Dude we hate you...
Sent from my Milestone using Tapatalk
Has anyone managed to update their phone by OTA in the setting,about menu??
If i try to update its just sitting there for a good minute or two, then just times out saying connection problems.. (over wifi, not able to try over 3G)
Ok, maby there's no update to get, but shouldnt the phone state so, not connection problems?
Anyone actually got this feature working?
It works.
I did a OTA update from V10c to V10d 3 weeks ago.
It depends on the day. Sometimes the Update Server seems to be offline and sometime online. I get the message "You have the lates Version" which pops up very fast or "Connection failed" after a few minutes.
No problems here.
Mine just pops up with the usual 'you have the latest version' message
I just get the usually message stating my phone is on the latest version, even though I'm on v10b...
I get a connection fail everytime I try...
I checked now on another wifi (iphone wifi hotspot ) an it works, so apparently there is an issue with my wifi/router...
I have no update option in "About" settings. I searched and saw a thread but no solution on how to get it back. I am on 10b version with 405 baseband from India. Any advice / solution on this
Hi ,
in Italy OTA update works from V10A to V10B.
But V10B on my phone not work fine , It make reboot or freeze my P990.
The new V10C ( beta ) are very good for now
I think there was a similar thread. If you have an unbranded phone you might not be able to use ota as its via a network provider. However you'll more likely get any update quicker via the lg update tool because of this
Sent from my LG-P990 using XDA App
when you check if are avaible an update , the P990 ask you to enable wi-fi
Mine comes up Connection Failed, Authentication problem
In Italy the servers were not working from the beginning of the marketing .
Try again next week
In Bulgaria,whit Vivacom also not working, "authentification error whit the server" every times when i check for new firm...
Sent from my E15i using XDA App
just installed new firmware OTA - updated my V10c to V10d
baseband 1035.21_20110725
kernel 2.6.32.9
version FRG83G
changelog (translated from LG Italy):
Improved stability of the software (patches applied to reset terminal block)
Fixed problems with audio playback on some TV connected with HDMI cable
Solved the problems of abnormal termination of applications for LG Facebook, Twitter for LG, LG and widgets for MySpace Music
Fixed problems on FM radio (slowness in setting up and occasional cases of no audio)
Fixed display problems in the Car Home
Applied patch to avoid network even in the presence of absence of signal
Applied security patches to Google Calendar, Picasa and address book to prevent unauthorized access to confidential information
Implemented the Google Mobile Suite r10
Implemented Google Maps version 5.7.0
Improved update via FOTA
Improved management of the pinch and zoom into the image gallery
The alarm sounds even when you close the process forcibly
Fixed problems with log-in account E-mail service, Yahoo and push activated
Improved compatibility with Wi-Fi Access Point Belkin
Fixed connection problems with WPA secured networks Enterprise
I can immediately verify the "Improved pinch and zoom in the image gallery"
Updating now. Thanks for the heads up.
Update in Sweden as well.
... and norway
Sent from my LG-P990 using Tapatalk
10d Voda Greece.
With this version you can't force stop an app.
Why's that?
How can we force stop them now?
Has anyone made flashable zips from the 725 BB and RIL?
torespen said:
Has anyone made flashable zips from the 725 BB and RIL?
Click to expand...
Click to collapse
http://android.modaco.com/topic/344840-baseband-725-9-aug-fls-files-for-smartflash/
Got update too. V10d here in Finland.
Thought it was GB
Update v10D also rolled out here on my 2x speed in the Netherlands
Its here in denmark too
Sent from my LG-P990 using XDA App
Noticeable improvements, i must say. Not GB but still, better than nothing
Installed the update, but still having random restarts. They can't get this problem fixed.
Sent from my LG-P990 using XDA App
Your phone have a hardware fault. Get it repaired.
Got it in Sweden, and my free memory after killing all apps is 222 MB
got an update in India, baseband version 1035.21_20110725, lge version v10e, hope this update fixes my wifi error and random reboots !!
Got an update here at Maldives too, but after downloading the data, the update gets stuck at 4%. After that it asks to reconnect the mobile and click retry, I have done it too but still no progress. Can anyone help me out?
I had that problem, too. The problem is that the phone doesn't boot into software upgrade mode. I solved it by rebooting my pc, and did the complete upgrade routine again, then it worked. If that doesn't work, then you could try to manually boot into S/W upgrade mode, haven't tested it, though.
Sent from my LG-P990 using Tapatalk
When i try to install the phone boots up in CWM without installing anything?
Any suggestions?
Every time it boots, it tells me there is a update which should be installed.
EDIT:
Can't remove the annoying top bar telling me to install the update! Arghhh!
Vidroid said:
I had that problem, too. The problem is that the phone doesn't boot into software upgrade mode. I solved it by rebooting my pc, and did the complete upgrade routine again, then it worked. If that doesn't work, then you could try to manually boot into S/W upgrade mode, haven't tested it, though.
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
Thanks, the update completed after I rebooted the PC and tried it over again. It got updated to V10e.
Not yet in Spain T.T
Sent from my LG-P990 using XDA App
Hi all,
I'm trying to upgrade my P9 to the latest software build but I've hit a brick wall. The phone is currently on L09C432B182 software version.
My phone was originally branded to EE (C440), but I followed the guide posted here to debrand it to C432. This was successful and after getting to B136 firmware I then got the updates to B166 and B182 in succession.
I've been using B182 for a couple of months, and all is working fine, but I've now got the urge to try Nougat. The problem is, all of the methods I've tried seem not to work.
- Huawei built in Updater app says no updates available
- Hisuite says no updates available
- Using the "Huawei Updater" via Hisuite/proxy method doesn't work as Hisuite is saying no internet connection (I think the custom ROM URLs are no longer valid)
- Using the Firmware Finder app and proxy add-on method gets me further in that I can download the updates (B360 or B361) in the built in Updater app and the phone will successfully verify them; however in all cases the installation fails at 5% due to "Software update failed! Failed to check the package"
- As a last resort, I tried extracting the update.app files from downloaded firmware, mounting in SD card/dload and then using the Dialer method to install from SD card; this also fails with a "Software update failed!" error
Has anyone had this issue when trying to upgrade from B182 and if so, did you manage to resolve it?
Thanks in advance
Nick
Don't try Nougat the battery life is ****
I tried the hisuite and Huawei updater route and got the no internet connection all the time. I gave up and went back to the firmware finder and tried to download B386 using the proxy method. This came back with failed to download. By random choice I checked the updater app on the phone to download latest full package. This immediately brought up and download the B386 firmware and it installed without a problem with no loss of data. Just to check it wasn't a bit of luck I did the same with the wife's phone and it worked the same way . As for battery life I don't see any problems with it
My new P20 Pro (Canadian Telus) is having issues updating to CLT-L04 8.1.0.109(C792) from CLT-L04 8.1.0.107(C792).
The Problem is that the device simply will not update no matter the method.
My device is unrooted at this point.
What Happens.
When going through each of the scenarios,
1) The firmware is downloaded,
2) The phone then boots into firmware installation mode,
3) Firmware supposedly is updated
4) Phone Boots
5) Upon checking in phone status the phone is still on CLT-L04 8.1.0.107(C792)
Methods I have Used to Update
A) OTA Update (result: not updated)
B) Factory reset the device and then trying to OTA Update. (result: not updated)
C) Update via HiSuite (result: not updated)
At this point, I am unsure why this is happening and how I can update to the new firmware.
Any advice or guidance is greatly appreciated!
Did you factory reset? After the last attempt? Is your bootloader unlocked? Have you tried eRevovery?
I have the same issue: new P20 Pro from Koodo (single SIM version), out of the box it prompted me to update, after I did this, I had for example a corrupted Settings app (name was a mix of letters and numbers and same name corruption with Chinese characters within). After this happened I did a factory reset, was back on 107 and was prompted to update again in the morning, which I did. Same outcome as above, after apparently successful installation and restart, I was still on 107 ...
Just got off a chat with Huawei Canada and apparently technicians are aware of the issue and are working on a hot fix that should resolve the update issue.
ccwestcliff said:
I have the same issue: new P20 Pro from Koodo (single SIM version), out of the box it prompted me to update, after I did this, I had for example a corrupted Settings app (name was a mix of letters and numbers and same name corruption with Chinese characters within). After this happened I did a factory reset, was back on 107 and was prompted to update again in the morning, which I did. Same outcome as above, after apparently successful installation and restart, I was still on 107 ...
Click to expand...
Click to collapse
You issues are very similar to mine.
I also had a corrupted settings app as well (mix of letters and numbers with Chinese characters)
Still no fix for the 107 to 109 update to report on.
So I had a chat session with a rep on Huawei Canada's site, he mentioned that my phone was 'Not Ready' for the update and hence why it was not updating.
I opted into an email notification through the rep for when the update becomes available.
I would recommend anyone else with this issue to bring it up to Huawei Canada and opt into a notification when the issue is resolved.
aglbz said:
So I had a chat session with a rep on Huawei Canada's site, he mentioned that my phone was 'Not Ready' for the update and hence why it was not updating.
I opted into an email notification through the rep for when the update becomes available.
I would recommend anyone else with this issue to bring it up to Huawei Canada and opt into a notification when the issue is resolved.
Click to expand...
Click to collapse
Well, given the corrupted Settings app that I (and seemingly others) had, I would say that "not ready" is rep speak for "we screwed up, please wait until we fix it" ...
Was delighted to see that CLT-L04 8.1.0.111(C792) showed up as update on my phone this morning and I hit the install button right away. Sadly (and really really annoyingly) the behaviour is the same as with the 109 update: the update seems to work but after restart the Settings app is corrupted and system shows still to be on 107. Immediately after the restart I was told to update to 111 which I tried once more, only to got a "Update couldn't be installed" fail message.
I then downloaded 111 again, wiped the cache partition and tried another installation. This time, the installation happened a lot faster (given the amount of update data, unrealistically fast) and I got the Update success message again. However, upon restart, I was still on 107 - this is pathetic!
Just to add to this story, I had to send my phone in for repair and apparently (according to repair report) the mainboard was replaced?! I am on .111 now and sincerely hope that future updates will perform as intended ...
ccwestcliff said:
Just to add to this story, I had to send my phone in for repair and apparently (according to repair report) the mainboard was replaced?! I am on .111 now and sincerely hope that future updates will perform as intended ...
Click to expand...
Click to collapse
Why u had to send it to repair?? is it because of the 'Update' not really updating issue? If you got any further solution for this,please let me know. I am also having the same problem.
Has anyone had any success with updates yet? I am still stuck on 107 and it say 114 is ready but always goes back to 107. No updates have installed, had the Telus p20 pro since July .
I haven't had any success yet. This is my last phone from them