Database Develop

Bell Stock firmware?

Anyone know where I can get the Bell stock firmware for Galaxy Tab???

jaykim85 said:
Anyone know where I can get the Bell stock firmware for Galaxy Tab???
Click to expand...
Click to collapse
Instead of making another thread, figured i'd bump yours up
I too am looking for a copy of a RotoBackup of the Bell Canada Galaxy Tab Stock firmware.
Thanks.

Same here... we need this for warranty .
if someone can help!..
Sent from my GT-P1000(M) using XDA App

This should be the stock firmware. I haven't tested it though.
http://www.multiupload.com/EIQQV7S6H8
Pass: samfirmware.com

neuropass said:
This should be the stock firmware. I haven't tested it though.
http://www.multiupload.com/EIQQV7S6H8
Pass: samfirmware.com
Click to expand...
Click to collapse
Thank you...
I didn't realize there was a newer firmware for it though... i believe i had the jj7 one (p1000UGJJ7) or somewhere in the JJ range.. lol.
I will grab that right away.
Thanks!

Can you comment on whether JM7 is the correct firmware for Bell users? I need to submit mine for warranty, too.

awryter said:
Can you comment on whether JM7 is the correct firmware for Bell users? I need to submit mine for warranty, too.
Click to expand...
Click to collapse
I dont' know if it is... I did go from a JJ firmware (can't remember if it was 3 or 7) directly to roto's jme.
According to samfirmware, there is the jj3 and then it goes to jm9.
At least these are for the "americas" versions.. i don't recall my tab being named p1000L, although it probably was..

No, the L version is for Latin "Americas" so that version is likely not for Bell users. I am fairly sure the stock Bell firmware is JJ7 which isn't available for some reason on Samfirmware.com... Is it possible for someone to use RotoBackup to dump a stock (or rooted stock) JJ7 and us use that to restore to it?

awryter said:
No, the L version is for Latin "Americas" so that version is likely not for Bell users. I am fairly sure the stock Bell firmware is JJ7 which isn't available for some reason on Samfirmware.com... Is it possible for someone to use RotoBackup to dump a stock (or rooted stock) JJ7 and us use that to restore to it?
Click to expand...
Click to collapse
Ahh that explains it.. thank you.
I presumed then that our bell tab's were P1000M (as is the Galaxy S being an M).
Let's hope someone has a bell stock roto backup.

I just bought one today to try out. I've already installed Apps and such. But I can reset it then do this roto backup. What are my steps, I won't lose root if I do a factory reset right, but do I need to do that?
Sent from my GT-P1000M using XDA App

Gochris said:
I just bought one today to try out. I've already installed Apps and such. But I can reset it then do this roto backup. What are my steps, I won't lose root if I do a factory reset right, but do I need to do that?
Sent from my GT-P1000M using XDA App
Click to expand...
Click to collapse
Hi there.
That's great, thank you!
If you do a quick search for rotobackup, that will explain how to do the backup.
Here's the Link to Rotobackup.
You have to be rooted to do the backup.
I don't believe you will lose the root, although its not hard to re-root
I haven't done the backup myself but will attempt to so I can do the next upgrade.
thanks again!
Sent from my GT-I9000M using XDA App

**** sorry, forgot to do this earlier. I just returned the tab back to the store. Again, sorry

I should have a backup of a mostly vanilla (few apps, that sort of thing) Bell tab from Dec. I'll have a look tomorrow when I'm back on my office computer.

PrinceOD said:
I should have a backup of a mostly vanilla (few apps, that sort of thing) Bell tab from Dec. I'll have a look tomorrow when I'm back on my office computer.
Click to expand...
Click to collapse
That would be great, thank you PrinceOD...
Much appreciated.

Any update on this? I'm desperate here.

Well, I had a look at my backup and it's not completely vanilla (rooted, couple apps) but if it'll help, I can package it up and upload it somewhere. Let me know. Sorry it took so long, it was on a portable drive that I'd loaned out, thought I had it on my desktop as well!

PrinceOD said:
Well, I had a look at my backup and it's not completely vanilla (rooted, couple apps) but if it'll help, I can package it up and upload it somewhere. Let me know. Sorry it took so long, it was on a portable drive that I'd loaned out, thought I had it on my desktop as well!
Click to expand...
Click to collapse
Hey there.
That would be great. In fact once reflashed we can always do a factory reset.
I'm not sure how big it would be nor do i know where one can send the file. Perhaps that multiupload site. Ive never used it so i dont know off hand.
Really appreciated!
Thanks!
Sent from my GT-P1000 using XDA App

I have a rooted Bell SGT with some applications installed. Let me know if I can be of any help. I haven't done a device backup or anything like that before, although I do a lot of this on BlackBerry devices - it won't be difficult for me.
Anyway, let me know if I can be of any help!

jlandon said:
I have a rooted Bell SGT with some applications installed. Let me know if I can be of any help. I haven't done a device backup or anything like that before, although I do a lot of this on BlackBerry devices - it won't be difficult for me.
Anyway, let me know if I can be of any help!
Click to expand...
Click to collapse
Hi jlandon
Yes that would be great if you could do it as well. i provided a link earlier in this thread for how to do the rotobackup.
Please and thank you very much.
Sent from my GT-P1000 using XDA App

One little thing I just thought of, I performed a carrier unlock already. Will this be a problem?

galaxy tap sprint after flashing arabic rom .blank screen

plz need help here
phone working after flashing arabic rom but with blank screen

can anyone provide asolution

ehab_elshaer said:
can anyone provide asolution
Click to expand...
Click to collapse
No need to bump after just an hour - especially for a Sprint Tab where most of the advice is going to have to wait until the Americans wake up!
Simplest answer is to flash back to your original ROM for the time being! Chances are the Arabic ROM you are flashing to has incorrect screen drivers for the Sprint Tab. If this is the case, simply flashing back the original kernel may help.
Regards,
Dave

sorry
but could you provide alink for original rom
i can`t find it
thankx

ehab_elshaer said:
sorry
but could you provide alink for original rom
i can`t find it
thankx
Click to expand...
Click to collapse
The stock firmware can be found in this thread: http://forum.xda-developers.com/showthread.php?t=869819
As per your blank screen, you flashed GSM firmware to your CDMA tab...not sure a workaround as I'm nervous to try anything gsm on mine
Sent from my SCH-I800 using XDA Premium App

I just got over a soft bricked tab by using Odin 3 with the sprint stock files. But if yours is a Verizon tab I don't know what firmware you need to use but I am sure a quick search on google will turn something up.

Let me just save you some time...You are 100% without a doubt bricked. Send it in to Samsung.

Bell Atrix Update 2.2.2 Firmware v37.23

ntroducing the new Android Froyo 2.2.2 software release for the Motorola Atrix. This update is now available and Bell strongly recommend clients to upgrade the software on their device.
Benefits of the Android Froyo 2.2.2 software update [Firmware v37.23] :
Improved device stability and performance.
Faster upload speeds now up to 5.76Mbps.
Improved email setup – for easier automatic email configuration.
Accented character support within Webtop application now available.
Greater touch screen and fingerprint sensitivity.
Addresses charging issues through USB from PC after battery is completely drained.
http://www.motorola.com/Support/CA-EN/sdcards/Atrix
Edit: Link = Fixed.

binary110 said:
ntroducing the new Android Froyo 2.2.2 software release for the Motorola Atrix. This update is now available and Bell strongly recommend clients to upgrade the software on their device.
Benefits of the Android Froyo 2.2.2 software update [Firmware v37.23] :
Improved device stability and performance.
Faster upload speeds now up to 5.76Mbps.
Improved email setup – for easier automatic email configuration.
Accented character support within Webtop application now available.
Greater touch screen and fingerprint sensitivity.
Addresses charging issues through USB from PC after battery is completely drained.
http://www.motorola.com/Support/US-EN/Atrix+Upgrade
Edit: Link was from a bell document, the Source says that its available OTA, as well as manually, but i can't seem to find the manual link working properly.
Sweet
Click to expand...
Click to collapse
Shouldn't this be somewhere else? Not a dev not even link to stock room?
Sent from my MB860 using XDA Premium App

Possibly, but i figured devs could use it.
http://www.motorola.com/Support/CA-EN/sdcards/Atrix
This is the proper link!

can i install this over greyblur?

and this would remove root priv? anyone tried rooting post install??

Not working
Just tried to update my atrix 3 times with no luck. Anyone else have issues updating a rooted, unlocked phone?

Now we need someone to pull the modem only from this.
Sent from my Blue Myst GladiAtrix on Bell using the XDA Premium App.

I've tried the update 3 times as well. No luck. It seems to hang about 20% through the unpacking.
I'm rooted, have the telstra modem and did the webtop via hdmi. Any ideas on how to move to the update?

zoverion said:
Just tried to update my atrix 3 times with no luck. Anyone else have issues updating a rooted, unlocked phone?
Click to expand...
Click to collapse
Ya..I tried this update yesterday OTA and had the same issues (I'm rooted and unlocked with webtop hack)..after about 20% I get the exclamation mark in the triangle telling me its failed. I was hoping to log on this morning and find the sbf ready to upload

I have the french SBF installed and greyblur/root. - I havent tried it, I doubt it will work on the french SBF. I really didn't realize how screwed we bell guys are without a factory SBF to work with. I feel like we get shafted out of all countries that got the atrix.
I just got my battery life issues sorted out, So even if i were able to try it, I wouldn't want to, But maybe there are useful fixes in it for the developers. We are getting custom roms for the ATT phones. Hopefully bell and international are soon.
I saw a post on motorola's forums from a guy who has a bell atrix that wants them to post a factory sbf for us so that we are "on par" with other countries around the world. i agree.

Should we stay on 2.1.1 and wait to flash the modem only or is this version better than 2.1.1
I hAve a bell atrix..
Sent from my MB860 using XDA Premium App

I am/was rooted and I was able to do the update. Just a bunch of fixes in it I guess. No major changes except for the faster upload. That's nice
You will have to re-root after installing it though. Gingerbreak works fine.

i installed the french sbf to get grey blur going so i'm guessing update won't work...

hburn said:
Should we stay on 2.1.1 and wait to flash the modem only or is this version better than 2.1.1
I hAve a bell atrix..
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I'd like to know this as well.
I'm thinking of at least flashing the new radio after work today though. People seem to say it's better than the one shipped with 2.1.1. I'll keep checking these threads though to wait for more comments.
Thanks for sharing your comments and experiences, guys. It's always very much appreciated.

I Didn't say it wont work for the french SBF, I just haven't tried.
I'm at work right now and can't have my phone go down at all, or i'll get fired. Which is why im not just jumping in and testing it.
Can someone confirm if it works or not with the Telstra SBF? I'm not on stock sbf, im greyblurred. If it does work, i'll re-sbf this thing to 2.1.1, and run the bell update.
I think my issue is that i'm rooted/greyblurred. So unless is flash sbf, and then try, i doubt it will work here.

I tried to run this over the French SBF, but was unable to.
binary110 said:
I Didn't say it wont work for the french SBF, I just haven't tried.
I'm at work right now and can't have my phone go down at all, or i'll get fired. Which is why im not just jumping in and testing it.
Can someone confirm if it works or not with the Telstra SBF? I'm not on stock sbf, im greyblurred. If it does work, i'll re-sbf this thing to 2.1.1, and run the bell update.
I think my issue is that i'm rooted/greyblurred. So unless is flash sbf, and then try, i doubt it will work here.
Click to expand...
Click to collapse

Zero-K said:
I am/was rooted and I was able to do the update. Just a bunch of fixes in it I guess. No major changes except for the faster upload. That's nice
You will have to re-root after installing it though. Gingerbreak works fine.
Click to expand...
Click to collapse
Did the rooting method work on this? Can you verify if the WebTop without Dock MOD works on this?

sservati said:
Did the rooting method work on this? Can you verify if the WebTop without Dock MOD works on this?
Click to expand...
Click to collapse
I took the Bell 37.23 update this morning.
My root was gone (I had originally rooted using GladRoot 4.3) and there was no longer any /osh/sbin/frozenfish.
I re-rooted my 37.23 using Gingerbreak 1.20 and it worked perfectly.
EDIT: just ran Speedtest.net mobile in downtown Montreal (great reception quality) and got 5737 kbps down and 2335 kbps up

Can I run the update even if i have froze all the bloatware? And will I have to re-freeze them after the update? ¸
I am kinda new to android but have a good experience in modding other mobile os (webos, wm5).
Thank you

quick question
i have french sbf
can i restore stock bell sbf to get this update
if yes where can i get stock bell sbf

[Fruit Cakes] XDA Re-Release [feb/18/2012]

Fruit Cakes XDA Re-Releases.​USAGE
Download and install the CWM zip for the factory ROM you wish for.​What is this?
This ROMs are simple copies of the official Motorola SBF, but in CWM form. Installing a SBF is dangerous, it could hard brick your device. Using this CWM versions the worst you can get is a soft brick.​RELEASES
ATT
Official
ATT 2.3.4 [4.5.91] Stock ROM (No Webtop)
ATT 2.3.4 [4.5.91] Webtop
Test Server Finds
ATT 2.3.5 Stock ROM (No Webtop)
ATT 2.3.5 Webtop (Still missing :[ )
ATT 2.3.6 Stock ROM [4.5.140] (No Webtop)
ATT 2.3.6 Webtop [4.5.140]
International ROMs
All missing, please contact me if you have any of them.
Zeljko1234 Back Up Links
Zeljko1234 Back Up Links Thread​
Note: This releases do not include a release note as I did not create the ROMs. Motorola did, their release notes can be found on their website.

​tutorial post coming soon​

Thank you for this. Hopefully this will help those who downloaded and installed the OTA and don't want to hard brick.

Sam is this safe for those who haven't unlocked their BL?

jruweaver said:
Sam is this safe for those who haven't unlocked their BL?
Click to expand...
Click to collapse
To use this you need tenfars CWM so you have to be unlocked.

go sam go!

OK I am a little confused if I flash this I can't use any future ota or do I have to flash the ota with this? I use rsd alot
Atrix - gingerbread 2.3.4 rooted with XDA premium application.

Xenocyde said:
OK I am a little confused if I flash this I can't use any future ota or do I have to flash the ota with this? I use rsd alot
Atrix - gingerbread 2.3.4 rooted with XDA premium application.
Click to expand...
Click to collapse
you may or may not be able to use future OTA... but bottom line is RSD going forward can cause hard bricks so goal is to move toward flashing just through cwm or fastboot

abandon RSD, the only time you should ever RSD is when you UNlock your BL, after that never use it agin unless something requiewres it. if you ever want to go back to 183 or whatever, find the appropiate files here for CWM.
Xenocyde said:
OK I am a little confused if I flash this I can't use any future ota or do I have to flash the ota with this? I use rsd alot
Atrix - gingerbread 2.3.4 rooted with XDA premium application.
Click to expand...
Click to collapse

I would like to point out that right now sbf flashing back hard brick proble is only with the OTA people, but im sure more than likely the Release OTA will have a new BL and will cause this same issues all around. So CWM is the alternative moving forward!

samcripp said:
I would like to point out that right now sbf flashing back hard brick proble is only with the OTA people, but im sure more than likely the Release OTA will have a new BL and will cause this same issues all around. So CWM is the alternative moving forward!
Click to expand...
Click to collapse
is there any way to determine the BL has changed from the leaked build, i mean the partition sizes or something else?

Thanks Sam!

munchy_cool said:
is there any way to determine the BL has changed from the leaked build, i mean the partition sizes or something else?
Click to expand...
Click to collapse
yes new bl is 8mgs old bl is 3

Samcripp,
Awesome idea! I was hoping someone would do this. I don't know why anyone would rsd back to any previous version once we finally have the bootloader unlocked. We can flash anything we want now without worrying about losing the unlock or a hard brick.
Thanks a lot!

Thanks sam, you have been very valuable to our community!
Sent from my MB860 using XDA Premium App

how are we supposed to install with this?

Slade8525 said:
how are we supposed to install with this?
Click to expand...
Click to collapse
using tenfars CWM

Fruit Cakes are the way of the future!

thanks i should have figured that out myself. no sleep in 70 hours spent most of today trying to get gingerbread on the atrix.

Nice job man. I was wondering why we are still bothering with RSD when we have Clockwork. I guess this signals the end of that crap. CW and Fruit Cakes FTW. Down with RSD!
Sent from my MB860 using Tapatalk

Best CyananogenMod for Droid 3

Ive read 10.1 is horrible...
I need camera to work and also need the version to work with the GSM hack.

PassingThruLife said:
Ive read 10.1 is horrible...
I need camera to work and also need the version to work with the GSM hack.
Click to expand...
Click to collapse
In that case, there is *no* CyanogenMod that's best for the Droid 3.

doogald said:
In that case, there is *no* CyanogenMod that's best for the Droid 3.
Click to expand...
Click to collapse
because of need for gsm or the camera?

There is no cm that I know of with a working camera.

doogald said:
There is no cm that I know of with a working camera.
Click to expand...
Click to collapse
ok thank you.
which is the most stable CM for the droid 3 that allows GSM data and everything else,if you happen to know. thank you.

need rom
is there at all any good jb rom for the D3 i really need one

Roblewis17 said:
is there at all any good jb rom for the D3 i really need one
Click to expand...
Click to collapse
I used AOKP for a while, It was very nice, However if you want camera, you'll have to settle for ics and get steeldroid 5.6

hey what abt the new update on cm10.1 dated 16/feb/14

people give me a link in order to download the caynogen mod for droid3

Check out my ROM Site for the best D3 Roms
http://www.mediafire.com/?b0gq735hrqxx6
Sent from my XT862 using XDA Free mobile app

Please Help Me
Hello all, please help me, i tried to update Motorola Droid 3 Android version 2.3.6 to 4.0... I installed update zip file from Recovery Mode. After this i could not turn on my phone. Any solutions?
Please help me. Thanks

Nick Jr said:
Hello all, please help me, i tried to update Motorola Droid 3 Android version 2.3.6 to 4.0... I installed update zip file from Recovery Mode. After this i could not turn on my phone. Any solutions?
Please help me. Thanks
Click to expand...
Click to collapse
You're story is missing some details. Firstly, it doesn't come with any version past 2.3.4, so you must have done some hacking before that. In either case, the simplest solution to a bricked device is flashing a 2.3.4 sbf using rsd lite. (You could get the latest sbfs from sbf[dot]droid-developers[dot]org. See this article for more information: Thread 1255198

The Droid 3 stock is only 2.3.4, but Milestone 3 has 2.3.6
Sent from my XT862 using Tapatalk

This entire thread is hilarious. If you would like to know what the best D3 roms are...try them. They have all been released publicly. They are right here in this forum. They are all available to you, so use them.