my Nexus one can't pass the animation screen - Nexus One Q&A, Help & Troubleshooting

I was traying to root my device after i rebote it stuks in the animation screen!!
any solution please?

abuzeyad said:
I was traying to root my device after i rebote it stuks in the animation screen!!
any solution please?
Click to expand...
Click to collapse
You would be best to start at the wiki. Depending on whether you are running a custom recovery, custom ROM, stock ROM, Android version etc the information we can give to help will differ. The wiki has pretty much every answer we can help with

Can you boot into Fastboot? Hold trackball when pressing the power button.

gibosn6594 said:
Can you boot into Fastboot? Hold trackball when pressing the power button.
Click to expand...
Click to collapse
yes i can boot to bootloader

thanx
problem solved i get back to frg33 using PASSIMG.ZIP then i recived OTA.

Related

[Q] root Nexus one without power button?

Hi, guys,
the power button of my Nexus one was broken. I am thinking to root it and install customed ROM. it is currently running stock ROM, and it is unlocked.
I read a lot, but I still have a question: can I root it and install customed ROM without power button?
I asked, because i am not sure if i have to use power button to enter recovery, for example, to Boot into Amon_Ra's Recovery.
thanks
JD
I saw the application, Fix Broken Button. does it work well?
thanks,
JaydenCanada said:
Hi, guys,
the power button of my Nexus one was broken. I am thinking to root it and install customed ROM. it is currently running stock ROM, and it is unlocked.
I read a lot, but I still have a question: can I root it and install customed ROM without power button?
I asked, because i am not sure if i have to use power button to enter recovery, for example, to Boot into Amon_Ra's Recovery.
thanks
JD
Click to expand...
Click to collapse
If you're referring to the bootloader being unlock than you can use fastboot
to install a custom recovery I think.
You can boot into recovery via adb:
adb reboot recovery
thanks for the reply.
which ROM supports using trackball as power button?
JaydenCanada said:
thanks for the reply.
which ROM supports using trackball as power button?
Click to expand...
Click to collapse
CM7 has trackball wake and trackball unlock.
There is NO ROM that will power on the device with trackball.

Galaxy Note 7000 Home button Issue

hi everybody
I bought this phone and the home button not working
first i want somebody to tell if have a custom rom or is the original ICS (See attachment)
Second, how can i check the button, like before boot
victorlht88 said:
looks like its running on stock rom.
you can try flashing another rom via odin, i've faced the same issue before when i removed certain apks in custom roms before flashing.
else boot into recovery mode and see if your home button can function when you make the selections.
Click to expand...
Click to collapse
how can i boot on recovery?
the phone is not rooted
Stock Recovery !
The G-Note has a stock recovery function as well. Just turn off your phone and hold the volume-up + Home + Power to enter into recovery. if this is successful then your home button functionality is good.
Akilesh said:
The G-Note has a stock recovery function as well. Just turn off your phone and hold the volume-up + Home + Power to enter into recovery. if this is successful then your home button functionality is good.
Click to expand...
Click to collapse
if you talk about this (downloading mode) i can do it only with restart and volume down
with volume down, home button and power it's only power up my phone (normal function)
how can i root my phone if I'm not able to run in recovery mode?
only in download mode
is any tools like superoneclick for Samsung note?
thanks
nobody have a solution for this?
thanks
nickmatine said:
how can i root my phone if I'm not able to run in recovery mode?
only in download mode
is any tools like superoneclick for Samsung note?
thanks
Click to expand...
Click to collapse
it might be a hardware fault go check up wid service centre.
I'm Pretty Sure Its A HardWare Fault Cause You Said you didn't flash any, rom or kernels Maybe you Could try flashing the stock rom with Odin again?
Sent from my GT-I9100G using XDA
xGeekyKiidx said:
I'm Pretty Sure Its A HardWare Fault Cause You Said you didn't flash any, rom or kernels Maybe you Could try flashing the stock rom with Odin again?
Sent from my GT-I9100G using XDA
Click to expand...
Click to collapse
i tried flash another rom and the same issue
i want to flash a rom already rooted with odin but i can't find
thanks for response
xGeekyKiidx said:
I'm Pretty Sure Its A HardWare Fault Cause You Said you didn't flash any, rom or kernels Maybe you Could try flashing the stock rom with Odin again?
Sent from my GT-I9100G using XDA
Click to expand...
Click to collapse
i didn't flash any but the item i bought it's second hand, in first post it's a picture with initial specs from phone. And the counter in download mode is around 16 and i only flashed 2 times
I'm back with my question:
it's any way to root my phone (with a custom rom already rooted) or anything else?
i can't restart my phone in recovery mode since y home button doesn't work
i want to root and after try to flash many rom's maybe it is not a hardware issue with home button
thanks
http://rootgalaxynote.com/galaxy-note-root/how-to-root-ics-on-galaxy-note-gt-n7000-no-computer-required/
That link shows you how to root your device without going into recovery.
tejaswi.rohit said:
http://rootgalaxynote.com/galaxy-note-root/how-to-root-ics-on-galaxy-note-gt-n7000-no-computer-required/
That link shows you how to root your device without going into recovery.
Click to expand...
Click to collapse
it always ask to use home button
thanks to everybody
It's a hardware issue. I'm gonna open a new thread for this
SOLVED- changed the home button cable (not so easy)

Think I messed up updated firmware

Hello all. I an S-Off running ViperOne and decided to update my firmware, but I used the 4.20.651.10 Modified Firmware....removed recovery (fastboot flashable) instead of the one with the removed boot as well. Now it's just at the white HTC screen after I rebooted. Any way to get out of this situation? I made a nandroid before I did anything.
Restore your backup or dirty flash your rom
Will I need to re-flash the correct firmware after restoring nandroid?
Crawshayi said:
Will I need to re-flash the correct firmware after restoring nandroid?
Click to expand...
Click to collapse
You shouldn't have to but you can if you want.
The reason it didn't boot is because the zip you flashed had the LP boot.img/kernel included.
BD619 said:
You shouldn't have to but you can if you want.
The reason it didn't boot is because the zip you flashed had the LP boot.img/kernel included.
Click to expand...
Click to collapse
Got it, thanks. All I was trying to do was update the firmware before trying the new ViperOne and I almost had a heart attack when it wasn't booting. I didn't realize you could do vol. up + power to simulate a battery pull, or I wouldn't have even needed to make this thread. Thanks for your help.
Crawshayi said:
Got it, thanks. All I was trying to do was update the firmware before trying the new ViperOne and I almost had a heart attack when it wasn't booting. I didn't realize you could do vol. up + power to simulate a battery pull, or I wouldn't have even needed to make this thread. Thanks for your help.
Click to expand...
Click to collapse
hye bro how did you get out of this, i have exactly the same problem but i cannot to the bootloader with "vol+ power button
any help??
renehd2 said:
hye bro how did you get out of this, i have exactly the same problem but i cannot to the bootloader with "vol+ power button
any help??
Click to expand...
Click to collapse
If you are trying to get to bootloader after doing a "battery pull" hold power and volup until device turns off, then while still holding power switch to voldown then release power while still holding voldown

[Q] Stuck at boot splash screen and will not reboot into recovery

Hello all,
I haven't touched my M7 in about 6 months but I figure it's time I try to fix it. Here are the following symptoms of my problem: it won't boot past the splash screen, it won't boot into recovery, and it doesn't like powering up unless it's plugged into a wall socket.
Is there any way I can RUU this or force it into fastboot or recovery?
press vol down + power button to enter bootloader and then choose fastboot
Sorry should have specified that I already tried that.
Is it unlocked or not? Does it have stock or custom recovery?
donkeykong1 said:
Is it unlocked or not? Does it have stock or custom recovery?
Click to expand...
Click to collapse
Custom recovery but stock ROM.
freshlimes said:
Custom recovery but stock ROM.
Click to expand...
Click to collapse
Where does power + vol down get you? Bootloader menu or bootloop again?
donkeykong1 said:
Where does power + vol down get you? Bootloader menu or bootloop again?
Click to expand...
Click to collapse
Bootloop and then back to being stuck on the splash screen.
freshlimes said:
Bootloop and then back to being stuck on the splash screen.
Click to expand...
Click to collapse
Did you try holding the power button for few seconds till capacitive buttons start flashing? After they stop keep holding the power button and press vol down. That should take you to bootloader menu
donkeykong1 said:
Did you try holding the power button for few seconds till capacitive buttons start flashing? After they stop keep holding the power button and press vol down. That should take you to bootloader menu
Click to expand...
Click to collapse
Yeah I've tried that too. Also bootloops.
freshlimes said:
Yeah I've tried that too. Also bootloops.
Click to expand...
Click to collapse
Hm... How did you get in that situation? A bit more info on your phone and the reason for the bootloop would be very helpfull
donkeykong1 said:
Hm... How did you get in that situation? A bit more info on your phone and the reason for the bootloop would be very helpfull
Click to expand...
Click to collapse
Sorry, seems I left out quite a bit. Was up late messing with it to see if I could get anything done and it was probably due to lack of sleep.
I believe it was after I had tried to RUU. Unforunately I don't remember with which .zip file, but I'm going to assume I didn't screw that up as I've had to RUU quite a few times and hadn't messed that up just yet.
freshlimes said:
Sorry, seems I left out quite a bit. Was up late messing with it to see if I could get anything done and it was probably due to lack of sleep.
I believe it was after I had tried to RUU. Unforunately I don't remember with which .zip file, but I'm going to assume I didn't screw that up as I've had to RUU quite a few times and hadn't messed that up just yet.
Click to expand...
Click to collapse
Only thing I don't understand is why it doesn't go to bootloader menu
donkeykong1 said:
Only thing I don't understand is why it doesn't go to bootloader menu
Click to expand...
Click to collapse
I fail to understand it too. Would be an easy fix if I could get it into fastboot.
freshlimes said:
I fail to understand it too. Would be an easy fix if I could get it into fastboot.
Click to expand...
Click to collapse
Well, it's hard to tell, but a hell of a lot easier than now [emoji6]

Le2 x520 no screen after unbrick

Hi
Hi all,
I've used this thread to unbrick a Leeco Le 2 (x520).
The flash itself went like a charm, however, after disconnecting the cable and pressing the power button to reboot, the screen remains black.
When I short press the power button I can hear a sound and vibration, but that's it.
I'm stuck, even more so than before.
Is there anyone who can help me with this issue please?
Thanks in advance!
PS: I've also posted this question Thursday in the thread itself.
hello, did you solve the problem? I have the same situation. If you solve the problem, please write to the mail [email protected]
I've also same issue, please tell me if you get rid of this.
Volvo_be said:
Hi
Hi all,
I've used this thread to unbrick a Leeco Le 2 (x520).
The flash itself went like a charm, however, after disconnecting the cable and pressing the power button to reboot, the screen remains black.
When I short press the power button I can hear a sound and vibration, but that's it.
I'm stuck, even more so than before.
Is there anyone who can help me with this issue please?
Thanks in advance!
PS: I've also posted this question Thursday in the thread itself.
Click to expand...
Click to collapse
PandaDex48 said:
hello, did you solve the problem? I have the same situation. If you solve the problem, please write to the mail [email protected]
Click to expand...
Click to collapse
Masood_alam said:
I've also same issue, please tell me if you get rid of this.
Click to expand...
Click to collapse
10. Once completed, disconnect the phone and power it up by long pressing power button.
Click to expand...
Click to collapse
I can't see/read, one of you did a long Power-Button pressing???
JamBax said:
I can't see/read, one of you did a long Power-Button pressing???
Click to expand...
Click to collapse
my leeco le2 is stuck on boot logo. i cant even unlock my bootloader. what to do?
sree94 said:
my leeco le2 is stuck on boot logo. i cant even unlock my bootloader. what to do?
Click to expand...
Click to collapse
Down load this older version of twrp-3.0.2-0-s2.img from https://dl.twrp.me/s2/
do a wipe->data format-> yes
then reboot.
Hi
I have same issue. Its looks like phone is turned on but my screen is black. I cant connect with adb cos i flashed fresh stock rom and with black screen i cant turn on debuging usb or unlock.(i can\t flash twrp so i cant flash new custom rom) Is there a way to flash custom rom with stock flasing tools like flashone or qfil, or is there a way to control my phone from computer without needing android screen(i can\t give any permission to new apps cos it new stock rom and my screen is black )
Solved - No Display after Flash
I know this is a old thread, but still i am posting this because u never know who might need it...
Guys i was having similar issue. After flashing Le2 with QFIL, I was getting no display. However my phone was somewhat on and making bleep sound when power key was pressed. Do this if you have similar problem:
1. Download this firmware:
https://drive.google.com/file/d/136X8jKA5eJRkyQ3Fi2f1r6qNkLXAG8io/view?usp=sharing
2. Flash it with QFIL/Miracle box/UMT whatever u feel like.
3. Hold Vol+ and Power button and goto Recovery. TWRP recovery will boot.
4. Now put any rom (i used latest LOS nightly) in it by using MTP from PC and flash it.
(Optional step: if u want to use official firmware It may happen that u get stuck at LeEco boot screen, only if u get stuck, then flash the kernel inside the zip and it will boot normally.)
5. ENJOY ^_^
If this helped, you know what u have to do :angel:

Categories

Resources