Related
ProKnight Kernel V2 - Xperia Pro (MK16)
Changelog:
November 1st
Go Here!
October 29th
Go Here!
Changelog:
July 28th
Based of ArcKnight Kernel RC3.3 Release for Arc and Arc S
Included Riyal's Recovery since I wasn't sure if Arc S recovery would work
OverClock up to 1.6GHZ.
Init.d Scripts Support.
Slightly Modified voltages Table (UV).
CMW Pre-installed
Tweaked Sio Scheduler.
Two Way Recording Call patch
Support for ext2,ext3,ext4 and NTFS FileSystems.
Latest Adreno Sources patched.
KGSL power Management Tweaks. - Super Smooth UI
Wifi Voltage Lowered
Charging power increased, now charging from USB ports should be a bit faster
LCD Panel voltage Lowered - It should use less battery when screen is on
PU Driver based on my own modified sources, it is the same as per the previous versions of ArcKnight Kernel
Tiny RCU instead of TREE RCU
SLQB Allocator instead of SLAB
CFQ, SIO and VR IO Schedulers modified and optimized fo Flahs Memory Devices
Memory Allocations tweaks like Kernel Granurality and Vm Dirtinesss
rcKnight CPU Governor modified to work with the NEW CPU Table, I know it was slow the first time but TRUST me it if smooth and fast and it will save your battery better than ondemand and intellidemand
ArcKngith_II CPU Governor
ArcKnight_II is my own CPU Governor based on the "Conservative" Governor but with some interesting addons specially when it comes to smoothness..
I've added static look up tables with arranged frequencies. So the CPU governor will look up on this table depending on the Average CPU load the phone is having to accomodate the best Frequency for the task running. For example when you're gamming or doing something heavy with the Phone the ArcKnight_II will push the CPU to the highest frequencies but when the CPU load gets reduced it will inmediately put the phone to lower freqs...
Users on the Arc and Arc S thread have reported great smoothness and good battery life when using the CPU Governor.
USB OTG Support
The Kernel should Provide full USB OTG Support for Mouse, Keyboard and Pendrive devices... However the .ko modules should be loaded separately since my aim was to keep the Kernel as slim and debugged as possible...
Instructions - How to Flash?
Flash as any other Kernel you have flashed before... - I strongly recommend a Clean install of both Kernel and ROM to avoid any leftovers or issues with any previous Kernel you might have...
DOWNLOADS:
Downloads will be placed in 2nd Post for Stable Releases and 3rd Post for Test Releases if any comes...
IMPORTANT:
Remember I don't own this device, I've ported the ArcKnight Kernel based on xperiaap request... So it will be really difficult for me to test and debug any possible error... You'll have to help me here
If you feel like supporting this fellow dev don't hesitate on clicking on the Thanks Button and if you have any spear bucks over there just click in HERE or in the donate to me button and you'll be helping me like you have no idea...
ProKnight_2.1 Kernel: ProKnight_2.1
ProKnight_2.1 Kernel Modules: ProKnight_2.1_Modules
Old Versions:
ProKnight_2 Kernel: ProKnight_2
ProKnight_2 Kernel Wifi Modules: ProKnight_2_Wifi_Modules
Another One!
Just in case i need it
Can you please name it something related to pro? It seems too Arc-ish..
flsmidth said:
Can you please name it something related to pro? It seems too Arc-ish..
Click to expand...
Click to collapse
^ He has a point.
I was about to download it thinking it was for Arc / S ^_^
Sure... I just put that name since the Kernel has created some sort of "Fame" with the ArcKnight Kernel...
I would like to hear some ideas from the Users, actually the ArcKnigh kernel was proposed by the Arc Users so, PRO Users I'll expect for some Ideas...
jimbo77 said:
Sure... I just put that name since the Kernel has created some sort of "Fame" with the ArcKnight Kernel...
I would like to hear some ideas from the Users, actually the ArcKnigh kernel was proposed by the Arc Users so, PRO Users I'll expect for some Ideas...
Click to expand...
Click to collapse
Prometheus Kernel..
Can I flash this kernel on my arc s?
Tapatalk @ Xperia Arc S
You already got ArcKnight kernel for Arc. This is a port for Xperia Pro..
Can you read? I think both the Title of the Thread and the 1st POST clearly state that the Kernel is for Xperia Pro...!
You know where the ArcKnight Kernel for Arc / Arc S is...
DzikBagienny said:
Can I flash this kernel on my arc s?
Tapatalk @ Xperia Arc S
Click to expand...
Click to collapse
Wat a Noobish Question :banghead:
Sent from my LT18i using Tapatalk 2
ArcMan09 said:
Wat a Noobish Question :banghead:
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
Sorry for stupid question but my English is poor and I dont understand 1st post enough
Tapatalk @ Xperia Arc S
jimbo77 said:
Sure... I just put that name since the Kernel has created some sort of "Fame" with the ArcKnight Kernel...
I would like to hear some ideas from the Users, actually the ArcKnigh kernel was proposed by the Arc Users so, PRO Users I'll expect for some Ideas...
Click to expand...
Click to collapse
How about...
KnightPro
---------- Post added at 09:29 AM ---------- Previous post was at 09:06 AM ----------
jimbo77 said:
ArcKnight Kernel Beta 1 - Xperia Pro (MK16)
Remember I don't own this device, I've ported the ArcKnight Kernel based on xperiaap request... So it will be really difficult for me to test and debug any possible error... You'll have to help me here
Click to expand...
Click to collapse
Hi,
Thanks for your work!
And thanks to xperiap for making the request.
Will try it out and maybe provide some logcats for debugging purposes...
Thanks again!!!
1stichiban said:
How about...
KnightPro
---------- Post added at 09:29 AM ---------- Previous post was at 09:06 AM ----------
Hi,
Thanks for your work!
And thanks to xperiap for making the request.
Will try it out and maybe provide some logcats for debugging purposes...
Thanks again!!!
Click to expand...
Click to collapse
That could be... btw do we have any feedback??? Has somebody tested it yet??
Sent from my SGS3... Yes I have it!!!!
Tested. Booted up. So far no bugs i think? Goodjob
Sent from my LT18i using Tapatalk
jimbo77 said:
That could be... btw do we have any feedback??? Has somebody tested it yet??
Sent from my SGS3... Yes I have it!!!!
Click to expand...
Click to collapse
hi, i just flashed it
BTW, i still haven't flashed the wfi modules yet but booted it already... on FW .58 but the title clearly states ICS... is this expected?
i just don't know if the combination will still boot after flashing the wifi modules...
After restart the i/o sheduler is on deadline ( allways reset to that if u choose another sheduler )
Nice kernel, will use it for a while thanks for your work
Sent from my MK16i using xda app-developers app
This kernel is no longer being updated. Please refer to kowalski kernel thread for CM10 ROMs.
Presenting CM10 kernel built from source with ramhack and OC/UV support by wkpark
Only for the new (unlocked ICS) bootloader!
This is RC's kernel, with patches by wkpark for ramhack and OC/UV. Supports OC upto 1.5 GHz.
Thanks to them for all their work. Also, thanks to pengus77 for bringing CM10 to the new bootloader
Built using my guide over here
Uses spica's HP supersonic toolchain
Works with CM10/MIUIv4 ROM on new bootloader only
Download links:
New and recommended powersaver version!
Includes pengus77's wifi drain fix (All credit to him for that)
Non-OC, to increase battery life and stability
RAM hack values 24 MB, 32 MB, 48 MB for increased smoothness
New experimental governors are absent in this ROM, which is meant to be a stable version for daily usage. The new governors have not been properly tested yet and are unlikely to be used by most of the users. They may be included in later builds after more testing. If you want to use them, flash the experimental kernel on the previous page.
This is the version recommended for daily usage. Try the 48 MB one first, and if camera gives problems, then try a lower RH value.
Download link for stable, powersaver version
Link to latest experimental version
Download link for older experimental versions
This is the link to my folder with all kernels for the new bootloader so far, in case you want to try some other version. Ramhack values are mentioned in the file names, and if it supports OC (not every phone will like OC) it is also mentioned in the file name.
Thanks to RC and wkpark, this would not be possible without them.
Warning:
I am not responsible if anything goes wrong with your phone.
If your phone does not like OC/UV, or freezes when overclocked, reduce the max frequency or dont use the OC version of the kernel.
If apps like camera give problem, try to use a version with reduced ramhack value.
To be flashed over the ROM without wiping data. Wipe only cache and dalvik cache
If you are having problems with the new kernel and wish to revert back to the stock kernel, flash your ROM again
Credits:
arcee and the rest of the CM team. Its their work it is based on
Donate to RC
wkpark for cracking the bootloader, new his patches, without which, there would be no ramhack or OC/UV
Donate to wkpark
pengus77 for bringing CM10 to the new bootloader and wifi battery drain fix.
This wouldn't be possible without him
spica1234 for his wonderful HP Supersonic toolchain
benee for his anykernel updater for star, and for all his work
Other devs for all their work (PM me if I forgot someone!)
Source: https://github.com/rugglez
Changelog:
29/12/12:
New version built with spica's supersonic HP toolchain
Integrated pengus77's latest (v3) wifi drain fix + bsod fix
27/12/12:
Experimental version released with new CPU governors (smartass v2 and hotplug), and simple I/O scheduler (default is still cfq), max frequency=1.2 GHz
Power saver version released without OC or new governors, and with pengus77's wifi battery drain fix
26/12/12:
Initial release
Max clock frequency is 1.5 GHz
Trying the 32mb oc kernel, seems ok so far, will report back any oddities,
I'm on penguss cm10.
i tested..............
Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Regards,
Orgler
Thank u guy's! i will try new_CM10_kernel_1225_32M_OC.zip and report back!
angel_boulevard said:
i tested..............
Click to expand...
Click to collapse
And....?
orgler said:
Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Click to expand...
Click to collapse
You could try it with cm10.1 but im not sure if it would work. Take a backup first. Wifi drain patches will be included with his permission and when he feels it is the right time (after the testing phase and all)
thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time
included wireless.ko is the one patched by pengus? thank you in advance
edit: just checked, it's not the patched one
First impressions are good! Not much room for UV as 1ghz is already at 1000mV which is quite low already I think? But that is not important, just an observation.
Thanks Rugglez. Been waiting a while for an OC kernel on CM10 and no call bug either. This is the future for our phone I think.
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
I just checked with "CPU spy" and yes it is hitting 1.5Ghz even though I have it set lower than that.
Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
anjo88 said:
thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time
Click to expand...
Click to collapse
Thanks for the idea, will add it.
rugglez said:
Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
Thanks for the idea, will add it.
Click to expand...
Click to collapse
So we waiting to test
Can you put in the next update some more CPU governers and I/O scheduler?
zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Took one pic and gallery FCed and phone soft rebooted.
With OC 32mb kernel camera and video recording is working.
Sent from my LG-P990 using xda premium
lgnd said:
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
I do a OC with default cm10 function and on antutu say 1200!
Sorry for being off topic. I really salute new generation of developers for optimus2x who never let us feel our main devs/modders have left. You guys are doing a fabulous job. Thanks to you all.
Gps does not working.
Tested with igo and maps.
Sent from my LG-P990 using Tapatalk 2
rugglez,
Please add pulse boost and hotplug governor. Thanks.
hi.
i would like to port kernel 2.6.35 from huawei u8150 to huawei u8220/8230.
a similar thing has been done with success by pier11 from modaco.com : http://www.modaco.com/topic/348865-kernel-2632/
he ported kernel 2.6.32.9 from u8150 to u8220/8230...so i think that the same can be done...
so i am here to ask for guidance...
thank you...
@ mods if i made a mistake by posting here:do what you have to do...thanks
desalesouche said:
hi.
i would like to port kernel 2.6.35 from huawei u8150 to huawei u8220/8230.
a similar thing has been done with success by pier11 from modaco.com : http://www.modaco.com/topic/348865-kernel-2632/
he ported kernel 2.6.32.9 from u8150 to u8220/8230...so i think that the same can be done...
so i am here to ask for guidance...
thank you...
@ mods if i made a mistake by posting here:do what you have to do...thanks
Click to expand...
Click to collapse
there isn't 2.6.35 kernel for u8150 , but 2.6.32
TakisBeskos said:
there isn't 2.6.35 kernel for u8150 , but 2.6.32
Click to expand...
Click to collapse
here :http://forum.xda-developers.com/showthread.php?p=26987020
- New Theme
- Kernel with patch 2.6.35 of qualcomm
- MAX Underclock 30mhz
- MAX Overclock 748mhz
desalesouche said:
here :http://forum.xda-developers.com/showthread.php?p=26987020
- New Theme
- Kernel with patch 2.6.35 of qualcomm
- MAX Underclock 30mhz
- MAX Overclock 748mhz
Click to expand...
Click to collapse
the rom you showed me , is a froyo one . froyo can't run on 2.6.35 kernel . it might have some patches from 2.6.35 kernel on 2.6.32 .
But , just to be 100% sure , i am now installing it to see for sure
hi everybody.
I've a very deep question: what is the best kernel which I can use on V30B for improve battery life?
thx
I'm not sure what you are asking, titel of your thread don't really fits what you write.
If you ask for a kernel for IceBOOM from rrgrrg as he said in his fist post http://forum.xda-developers.com/showpost.php?p=35225392&postcount=1 the kernel from Gawbeakz (V30i Kernel). I don't think there is a other kernel as the one it came with, GB kernels will surly not run with it and ICS kernels probably neather.
ZeroGravity Kernel with governor "Interactive"
Try it... http://forum.xda-developers.com/showthread.php?t=2082740
pado11 said:
ZeroGravity Kernel with governor "Interactive"
Try it... http://forum.xda-developers.com/showthread.php?t=2082740
Click to expand...
Click to collapse
Grazie Pado (thx Pado), but I've found some battery drain problems. BTW I flashed ZG rom yesterday evening and it is very fast and smooth. I'm really surprised by the work done from Andoiib, hence I will keep that ROM untill new Zeus (if it will be better than this one)
thx
Hi !
I decided to fix issue with wi-fi error (can't turn on) in squadzone kernel. :angel:
I use the driver uploaded by @AriaSatya_M , and now this oc kernel can be used on all stock roms!
From LC3 up to the lastest MK1 (pda version)
Enjoy overclocking !
Note:
Kernel values:
Min. > 112 Mhz
Max. > 1126 Mhz
Download:
Is this just the same kernel with the *.ko included, or is the kernel (boot.img) modified as well?
MrMateczko said:
Is this just the same kernel with the *.ko included, or is the kernel (boot.img) modified as well?
Click to expand...
Click to collapse
Same kernel + .ko + busybox + Auto SUperuser
what bug?i'm using squadzone's kernel and I haven't noticed a bug just curious
Hey MaDaLiNoSt
Do some searching in XDA and you'll be able to find a thread that shows you how to OC Adreno 200 GPU and improve Snapdragon S1 processors of which we have on the Mini 2!
Via the Internet
stock?
Is it stock only?
Hi all. I am not developing this phone anymore sice I buy a lumia. Other devs could continue with overclocking and building roms, but remember that this phone is an old phone, so do not expect that you will ever install android 5/6 on this mobile.
Request
Can Someone Max the oc value upto 1152 and also explain the procedure to flash this kernel
please
also is it for jenad or jena
can i install it over KSA Rom S6500DJPLD1