Database Develop

[Q] prob with download mode

hello i found this forum great for mod my samsung galaxy s here i found a lot of thinks.
but here is my problem i have already install the samsung kies and android sdk, but when i trie to update my phone with kies the process run normally until it come the time that kies put the phone in download mode, there i receive a messege on the windows task bar like i have disconnected the phone and then it says that "error unknow device" and the upgrade on kies cant go on.
any help plz thanks
i have a att galaxy s rooted
windows 7 32bit
latest version of kies

First thing to try is test each of the different usb ports on your computer - if you get the same error on each port then my first instinct would be to reinstall the samsung drivers for your computer.
If you try reinstalling the drivers below is a link to the drivers that have worked the best for me.
http://www.mediafire.com/?0b45zo7o75rc5d5 - samsung captivate windows 32 bit drivers

thanks for your replay. i already have uninstall the drivers and reinstall them with no success, but i will try to test it in other usb port and report later

this is soo bad i have try both of you recomendations and still says usb device not recognize. then it says no driver was install and when i click that it says on the driver part that windows have stop the device for a error code 43.
i have search a lot and i havent find anything close to my problem can anyone else give recomendations on this or tell me if you know something similar to this happend to other users.
ps - i also try on a win xp 32 with the same result

[Q] [I-9000] Need help galaxy S

Hi,
I have this problem for a long time... When i connect my I9000 to my PC i get this message " device has malfunctioned ". I have installed all the necessary drivers including kies.! I have Galaxy Ace which connects and works fine in the same PC. Only when i connect my I9000, it only starts charging and nothing happens to my device.
Can you guys help me out??
Any solutions>>!??

karthik22 said:
Hi,
I have this problem for a long time... When i connect my I9000 to my PC i get this message " device has malfunctioned ". I have installed all the necessary drivers including kies.! I have Galaxy Ace which connects and works fine in the same PC. Only when i connect my I9000, it only starts charging and nothing happens to my device.
Can you guys help me out??
Any solutions>>!??
Click to expand...
Click to collapse
Does the error appear on the phone or your PC?

The ERROR shows up in my PC!

make sure that the debugging mode is working then when you connect your phone check the notification bar and slide it down then click USB connected and i hope it will work

you may also want to check if the latest drivers were installed correctly on your win machine - if not try to re-install from scratch

nothin happens to my phone.! When i connect my phone to the PC... i get nothin from the phone.... the phone just starts charging... thats it.!! nothin is displayed in the phone or the notification area or not even the debugging mode starts! As soon as i connect my phone to the USB, windows displays that the phone has malfunctioned.!! I even Tried re-installing WIN7 and also a factory reset to my Phone.! No use.!!
And i have installed the latest drivers in my PC....
My galaxy ACE works fine when i connect with the PC.! But not my I9000.!

http://db.tt/UVIMfv6 try that zip from CWM recovery ..apply that script..hope that script will be channging ur usb vold
Sent from my GT-I9000 using XDA App

Please help me out on how to apply the script? Am new to this!

you have custom kernel?
-download the file
-save it to sdcard directory
-reboot to recovery (i mean Clockwork recovery not standar recovery from samsung)
-apply any zip from sdcard
-klik that file
-back and reboot system
Sent from my GT-I9000 using XDA App

please report if work or not.. btw thats.script is safe just changing the script
..
or if it not works please update your driver for Galaxy S and remove the KIES
Sent from my GT-I9000 using XDA App

Windows Not detecting Galaxy S

Guys , all of a sudden Windows 7 has stopped detecting my Galaxy S . I tried reinstalling drivers / tried another cable . Tried usb debugging on/of multiple times , but to no avail . The phone is not even being detected in the Downloading mode via odin .
The phone is however working fine / charging with the cable as well . I am on Galnet MIUI twooey 3 . Can anyone help me out here ?

anyone ? i have been trying for 2 hours now . But to no avail

Check device manager to see if there are any issues with the driver.
Grab an ubuntu live CD, boot it, plug in your phone and run dmesg to see what it says.. You should see information about the device being plugged in (to at least rule out Win7 issues).

No issues found in device manager . I donot have the ubantu cd . Any other fix for this ?

tried formatting the internal sd card but no luck .Tried connecting the phone on a friends laptop , its not connecting their as well
is this problem related to the rom i am using ?

even after a factory reset , windows 7 is not detecting my phone . I need help

The most interesting thing is where ever i insert the usb cable in , windows its not even detecting anything at all . This is really weird , because just a day back everything was working fine .

Download the Ubuntu CD if you don't have it. Another option is to get terminal emulator from the market, then run the dmesg command right after you plug the phone in to see what the phone if doing.

Run the dmesg command via tha terminal app , connected the phone via usb and run the command . It is displaying a long list of things .
its displaying the same list of commands regardless if the usb is connected or not .

Can anyone help me out here ? I still cannot get the phone to be recognized by windows 7 . I have tried multiple original cables .
Only once it appeared in device manager saying unknown device , and further said that its some code 43 problem .

is this some hardware problem ?

I had this problem recently when I flashed cm7. What I did was put my phone in download mode THEN connect it to the pc and the drivers will be installed automatically. Let me know if this works.
Sent from my GT-I9000 using XDA App

Try to connect another PC and see if its detecting or not. If its detecting it is your windows problem. Download usb driver from samfirmware and see..

anyone ?????

I have tried connecting the phone on three different laptops . But none of them is detecting the phone .
I tried connecting it via tha download mode , but neither windows nor odin is detecting the phone ..

i have noticed one thing as well , the usb charging is going slow now as well .
Guys , can i install my jvo rom backup image over this galnet miui ? i am just afraid that if that doesn`t work , then i`ll be stuck with a non functioning phone , as odin is also not detecting the phone as well . And i`ll not be able to flash anything without it :S
suggestions ?

If you have the drivers uninstall them and reboot your pc. Then put your phone in download mode and connect it to the pc with the cable provided. The drivers should install automatically
Sent from my GT-I9000 using XDA App

seeraj15 said:
I had this problem recently when I flashed cm7. What I did was put my phone in download mode THEN connect it to the pc and the drivers will be installed automatically. Let me know if this works.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
buddy i just tried this one again . But windows is not detecting the phone in download mode as well

Does windows actually try and instal the drivers?
Sent from my GT-I9000 using XDA App

Nops . Sometimes it just detects the device and says that no driver found . And sometimes nothing happens .
This happens on all the laptops on which i tried . Shows there is something wrong with the phone . Is it the Rom ? or a hardware problem ? . Keep in mind that the phone charges just fine .

[Q] Stuck in a bootloop win not recognize

Hi guys,
Few days ago my i9000 crashed in a morning and sens then iam stuck ian a boot loop.
I know that i need to reflash rom thru odin my problem is the drivers, i tried few drivers that i found in the forum, sdk-from the cm9 post, kies and some more.
No one of these drivers can be recognized by my win 7 32 bit.
After that i took friend PC's and try on each pc different driver, nothing.
I'am dont know what can i do more then, thing i try everything.
I used I9000 with cm9 build 15.
If some one can help me to slove this problem , I was thenkfull.
p/s Sorry for my bad english

can you get into 3BR or download mode?

I can get into download mode

See if you are able to find a copy of this app "SAMSUNG USB Driver for Mobile Phones" download and install on the comuter that you will be using
Allow the app to completely run as it does take a while to install if the computer is a bit slow.
Then try odin
Also make sue that Kies is not runnning a background process (use task manager)
If you are unable to locate the app PM me and i will upload as soon as i get a chance

Did that few times in a few different pc. win7 and xp.
Nothing.

sorry out of ideas
Maybe the USB jig??

Nope
Thank you anyway. I'll keep trying solving.

Have you plugged your phone to PC before? If no that why it couldn't recognize. If yes go to buy a new phone ). Just kidding, I don't know why it was like that. Did you try another USB wire?
Sent from my GT-I9000 using xda premium

On my PC i pluged before , but on other pc's i'v install the drivers before plug him.
Also try another USB wire , cable ...
For sure i know that its problem came frome the win , cuz the phone is in dm he never get breake so i dont need to use the jig even.

CM9 = Galaxy Nexus Drivers
I had cm9 + sdk but i needed die drivers via Setup.exe

HELP! Having issues returning to stock rom

Ok So was running my custom rom and decided to return it to stock. PC odin keeps saying fail when I try to flash standard ICS Rom and then whenever I try to retry it my PC keeps saying USB Device is not recognized?? I uninstalled Samsung Kies and Samsung USB driver and reinstalled but still have the same problem?
My phone can get into download mode and also if I simply try to turn it on its says Firmware Upgrade encountered an issue, Please select recovery mode and try in Kies & try again.
The standard rom I am trying to flash is called: N7000XXLQ2_N7000XXLPT_N7000XEULP4_HOME.tar.md5
And the version of PC Odin is Odin3 v3.04
Can anyone help as I am stuk at work without a phone

Forgot to say when I put it in download mode and connect the usb cable I get a pop up on my pc saying USB Device is not recognized.

it is due to bad usb connection
1 change usb cable.. may b it getting shorting inside ,, on rx tx
2 change usb port. do not relay on front cabinate usb if you are not using laptop.. use on board usb
after this two things should change or your motherboard is not producing enough power for device
try on another pc.. ofcourse of frend..
regards
skhan

All sorted had to run the Samsung USB Drivers as an Administrator and it all worked fine Phew!

wow........ ...... .......
new thing heard from you....
good work in technical field.. im impressed .... go ahead