Cant flash further with Odin - Galaxy S I9000 Q&A, Help & Troubleshooting

Ok i bricked phone after instaling a theme from Clockworkrecovery and it kept restarting all the time.I dwed march stock rom wich have only 1 file and i put it on PDA in Odin 1.30 and it stays on Setup Connection all the time.pls respond to this cause idk wat else to do.

sizzlers said:
Ok i bricked phone after instaling a theme from Clockworkrecovery and it kept restarting all the time.I dwed march stock rom wich have only 1 file and i put it on PDA in Odin 1.30 and it stays on Setup Connection all the time.pls respond to this cause idk wat else to do.
Click to expand...
Click to collapse
I guest you have to tick partition with .pit file included. Maybe you can try Darky's ROM that flash thru odin http://forum.xda-developers.com/showthread.php?t=940671
Read the whole thread and good luck.

follow this guide here flash Eclair than froyo
http://forum.xda-developers.com/showthread.php?t=847765
cheers

Do what angiogram says and it will work

Preference for a broken phone is to flash via Odin to Eclair using pit 512 and reparation checked .
The aim is to recover the phone to a working state you can then do what you want in the way of custom roms .
jje

Related

[Q] BlackScreen *WITH* DOWNLOAD mode working

Hi guys i searched for other threds before making this one but none of them had download mode working
i tried flashing jpy and jpx with odin using the 512 and the 813 pit files, my problem is that after showing the sgs screen(really effing loud) the screen goes dark and vibrates in a pattern that goes like ........1....2................1...2...........1............2 and repeats, i can accces both the download and recovery modes
Extra maybe important info:
came eclair jm4 flashed with kies then from jm7 i think with the bujp5 modem(the vodafone one) tried to flash jpy & jpx still stuck on darkscreen
in odin i only had the pit+pda checked with repartition, autoreboot and f.reset time ticked. Did i miss something?
I also tried to flash jpo, no dice.
Try to flash an other firmware (2.1)
Take it from samfirmware
They supply 3in1 packages that need to be put in only pda
Use pit 512
Repartition
If that worked, then try a 2.2(.1)
______________________________
Send from my shiny gadget!
Cypher_X said:
Try to flash an other firmware (2.1)
Take it from samfirmware
They supply 3in1 packages that need to be put in only pda
Use pit 512
Repartition
If that worked, then try a 2.2(.1)
______________________________
Send from my shiny gadget!
Click to expand...
Click to collapse
As Cypher_X said try 2.1 i always go jm8 never failed me
Ok thanks gonna try with that
Sent from my X10i using XDA App
Ok that worked booted up perfectly fine but....I retried flashing jpy and I keep getting the damm dark screen could the file be corrupted or something? Also don't know if this is normal but after flashing I always get booted up in recovery that didn't happen when on kies again don't know if this is normal
calexus1182 said:
Ok that worked booted up perfectly fine but....I retried flashing jpy and I keep getting the damm dark screen could the file be corrupted or something? Also don't know if this is normal but after flashing I always get booted up in recovery that didn't happen when on kies again don't know if this is normal
Click to expand...
Click to collapse
Where did you get jpy from? I got mine from samfirmware and had no dramas. Went from jm8 to jpy you could always flash a 2e recovery kernel cf root for example then install cwm so you can install custom jpy roms..i use darkys and love it
Got it working : D For any future reference flash jm8 with repartition on then jpy with repartition off...
on another note what do I do when I already have jpy working and want a clean instal of it plus different modem and kernel? (repartition on/off, do I use any pit files ?
Happy new year
can someone please tell me where to get these files from?
i've searched but keep getting the wrong pit or stock firmware..
i'm a noob and i'm confused, excuse me of my ignorance but i've tried sooo much lol
btw i have a bell I9000M which i think is my problem.. help

[Q] Galaxy s i9000 cant boot at 2.2

I dont know where to start, but my phone was fascinating before updating do darky 9.2
I tried to install Voodoo, Speedmod, Ryan,...format sd card...ect but...my phone is still nearly dying.
My phone could currently be turned on and work freezingly and unresponsively in Eclair version (and able to access to Download mode), but whenever I tried upgrade it to 2.2 or 2.21 (so many versions tried from JP2 - JPY and JXS5) my phone cant not be booted at SamSung Galaxy S I9000 screen and Recovery Mode is blocked (but not the Download Mode).
Have anyone of you experienced it before and found any solution to fix it...PLZ share, plz help.
THanks
right dont panic, download something like JM8 with PIT
flash it thru odin with re-partition and that should do the trick
then upgrade to something newer.
im at JM8 right now (same as last 2 weeks) with unresponsive screen. Try to upgrade to jpo, jpy, jp2...but all failed (cant not boot at froyo)
and did you have all the 3 files and PIT ?? if so what PIT was you using ?? and did you check re partition ??
Wipe the lot install Eclair via Odin see if it fixes your problem then upgrade .
jje
Flash Jm8 with Pit 512 repartition checked.
->>> Working but freezing...completely freezing
Flash again with JPO (1file) no pit, repartition unchecked
-->> Cant boot
Flash back again Jm8 with Pit 512 repartition checked
-> Working and more freezing
Flash JPY -> cant boot
Tried like all the stock roms with the same procedure but...just getting lost
thanks
Yet another post of this ...wow.
Same thing I am looking for help on other threads...i didnt expect others to have same issue. I have tried many things as welll ...nothing works.
JJEgan said:
Wipe the lot install Eclair via Odin see if it fixes your problem then upgrade .
jje
Click to expand...
Click to collapse
+1
this best option to get ur SGS working
@steven: true. No solutions recommended working so far. But I just wonder what would create the problem, and why the phone stuck at 2.2...'
plutox1982 said:
@steven: true. No solutions recommended working so far. But I just wonder what would create the problem, and why the phone stuck at 2.2...'
Click to expand...
Click to collapse
First sentence of your first post gives a big clue .
jje

[Q] odin successful but stuck on boot

hi XDA members ..
am kinda new on this stuff "noob".
i bought my sgs (GT I9000) from KSA with (and am not sure) I9000JPJG8 frimware.
the whole story is that i tried to upgrade to froyo but the process didn't when well and odin was stuck. so i ignorantly pulled the usb out, and had that phone->attention-> pc sign. but i was able to get to download mode. later i noticed that i used a I9000M froyo firmware.
anyway, i read through threads about semi-bricked sgs and found that i must reflash again my stock firmware, and that's what i did.
the odin flash is successful and the phone shows the galaxy s startup screen and then that loading sign and the loop starts ( loading sign appears - disappears -appear again ..etc) i pulled out the battery and powered it on to have a Galaxy s startup screen loop also.
i can't get to recovery mode, and here the names of the firmware i used to flash:
I9000JPJG8
I9000JPJPG
I9000JVJPF
I9000UGJH2
i need the firmware to have arabic support so that's why those above where my choices, but i wouldn't mind losing arabic for z sake of my new sgs
sorry if my english is bad
suggestions???!! and thanx in advance
have you been flashing these firmwares with PIT file ??
i think thats whats needed,
try to flash stock eclair 2.2 or froyo 2.2.1 with all 3 files and 512 pit.
i tried all .pit files to no avail...
and what do u mean by eclair 2.2 , isn't it 2.1 ??! and do u mean pit512 , 513 , 803 by the 3 files or what?
thx for replying
edit:
do u recommend certain odin version because i don't know which to use exactly ?
yea sorry i mean eclair 2.1
whenever i have trouble like you, i flash JM1 in all 3 files (phone pda csc ) and 512 pit, with the repartition box in odin checked.
works a treat everytime
i tried it but it stopped in z middle and odin said (FAIL)
have you made sure KIES is closed, even in the icon tray ??
Are you using odin 1.7 ??
also try to connect your phone direct to the motherboard
if it still fails, post me a screenshot of what odin looks like before you press start
oh my .. kies was closed in icon tray but there were some kies related stuff running when i opened the tasked manager. but unfortnately nothing happened , same things are still there.
here z pic , doing the method u mentioned before
h*tp://imageshack.us/photo/my-images/696/odink.png/
right the problem is you are using a firmware compressed into 1 .tar file
remove the pit file - uncheck re partition
remove phone
remove CSC
all you want is OJP_JG9.tar loaded into PDA.
A MAJOR UPDATE ..
while waiting for replies i tried this method in this post using eugene froyo :
http://forum.xda-developers.com/showpost.php?p=10498057&postcount=14
suprisingly my phone now changed to vibrant on start-up and has z following :
froyo 2.2
baseband T959UVJK2
kernel 2.6.32.9
now that it is alive .. can i shift to z froyo 2.2 with arabic support or do u suggest that i stick to it ?
i think i'll change since everything is messed up ..
vol. buttons are reversed .. music is not played through speaker unless head-phones are used .. numerous apps crashing ..
man am soo confused
you have flashed samsung vibrant on your samsung galaxy
that is why you have these problems !
did you download a GALAXY I9000 ROM ?? if not do so now.
Flash it in odin.
If it comes in 3 files (PDA, Phone, CSC) add 512 PIT and select re-partition
If it comes in 1 .tar file. Load it into PDA and DO NOT USE PIT OR REPARTITION
hit start and done, its so simple.
you really ought to read instructions before you go flashing ROMs.
i really did but it looks like i didn't pay attention to GT I9000/M thing ..
ok thanx for z help and i'll reply back when done with z ROM
i hate to be demanding but can u give me links cause am sick of downloading wrong files ((
www.samfirmware.com
http://forum.xda-developers.com/showthread.php?t=846913
so now my phone powers off when connected with usb ... what shall i do ????
can you boot into recovery ? if so do a full factory reset and try again. and try to flash a rom in recovery (if you have 2e)
i have no idea why the phone powers off with usb.
does it do this in download mode too ??
did you flash a stock rom ?? if so what rom did you choose
i flashed eugene froyo
should i use I9000 method or vibrant method for recovery ??
i got into recovery when i flshed the vibrant rom back then .. :s
edit: a question , have i lost z root thing when i flashed the vibrant or not ?
first of all enter download mode . Try this method ( press home and volume down and insert the usb conected at pc ) , and flash darky resurection 9.2 or ezrom 2.2.1 , i think both have bootloaders , I prefer ezrom ( saved my phone after CM7 or miui )

please help with S5830i

hello every one
i have tried to flash a stock rom previously with odin
but it seems i flashed an incompatible stock rom
now everytime the device restart it stuck on the loggo screen
then a black screen appears and thats it
and now when i try to flash the right one
odin stuck at SetupConnection..
how to fix this
thats all what happens
pleeeeeeeeeeeease help me
guys
i am using odin 1.48 and also i have 1.45
they both giving me the same results ... after checking of boot imag,pda,phone,and csc
after that there is file anylises , then setup connection.. but then it shows all thread complete..(sucseed0/failed 1)
i think the problem is with connection between device and odin
and i am not sure if my device running in download mod since the screen doesn't show
do i have other options to flash stock roms instead of odin?
pleeeease help me
any help would be soo appreciated
regards
BADroid-z said:
guys
i am using odin 1.48 and also i have 1.45
they both giving me the same results ... after checking of boot imag,pda,phone,and csc
after that there is file anylises , then setup connection.. but then it shows all thread complete..(sucseed0/failed 1)
i think the problem is with connection between device and odin
and i am not sure if my device running in download mod since the screen doesn't show
do i have other options to flash stock roms instead of odin?
pleeeease help me
any help would be soo appreciated
regards
Click to expand...
Click to collapse
Try odin v3 and download newest firmware from samfirmware. You extract the zip and put the file in pda. Then press Start.
How long did you wait after the black screen? Maybe it is a black screen because it has not the right bootanimation enabler. Try waiting 5 minutes after black screen.
BADroid-z said:
hello every one
i have tried to flash a stock rom previously with odin
but it seems i flashed an incompatible stock rom
now everytime the device restart it stuck on the loggo screen
then a black screen appears and thats it
and now when i try to flash the right one
odin stuck at SetupConnection..
how to fix this
thats all what happens
pleeeeeeeeeeeease help me
Click to expand...
Click to collapse
ur probably soft bricked device go to sammobile and download latest firmware in ur country then download Odin v3.07.zip [google ] and flash PDA from sammobile ... ur done

Semi-Brick....could be the eMMC brick!?!?

Hello all,
I recieved a Galaxy Note for repair from a friend of mine. She says that the phone was working normally until it rebooted and then didnt get past the first Samsung Galaxy Note Logo.....she took it to samsung who said it was a faulty motherboard (hint: possible eMMC brick, though in India, thats their go-to response). The phone now shows a firmware upgrade failed sign (PHONE----------!-----------PC) telling me to plug it into Kies, which doesnt recognize it. It doesnt go into recovery mode at all but goes into download mode. I opened odin and flashed a stock gb rom with pit file(repartition ticked). The phone gets stuck at Set Partition. Have tried different Odins, different USB Cables, ticking diff. options in odin and god knows what else. How do i get this phone up and running? Is it the emmc brick bug? I think it is...
did you kill kies processes before using odin?
Yup. Done already....no change
if it gets stuck at repartition process, then its more than an eMMC brickbug. How its the phone right now?, can you go to recovery?. The best you can do: flash a safe kernel and then a cyannogenmod (or AOSP) rom, if it boots (probably you will get a lot of force closes), try to flash a jelly bean stock rom (without repartition) and then repartition it.
If still not work, the last option its jTag (riff box), it will repartition the whole phone.
Sorry my bad english
Hmmm, I'm not sure about that last part, but if I do it without repartition, it gets stuck at nand write of cache. Right now, it either goes into upgrade failed connect to kies sign or into download mode, both of which I'm guessing are the same
try uninstall and reInstall you samsung usb driver...
http://forum.xda-developers.com/showthread.php?t=961956
and try use other pc odin version..
try flash without repartition.
Checked. Same issue
xyancompgeek said:
Checked. Same issue
Click to expand...
Click to collapse
Odin stuck on?..
lets try flash kernel using pc odin
http://forum.xda-developers.com/showthread.php?t=1901191
Odin is stuck on this screen. Phone is in download mode. Cannot go into recovery.
You might need a usb jtag thing.maybe that will help in getting ur phone 8dentifiedby odin
Sent from my GT-N7000 using xda app-developers app
It is recognized by Odin, it just cant flash anything. One thing though, odin 3.07 atleast has the courtesy to tell me that it failed on set partition, odin 1.85 gets stuck at set partition.
what are you trying to do? you are only selecting the PIT file and nothing else in Odin. use the Original PIT not modified one with the rom file in PDA .
Nothing more is supposed to happen if only PIT file is added to odin. Donot use a custom PIT file till its confirmed a EMMC corruption.. use the original PIT file from Dr Ketans Guide in Original Dev Section

Categories

Resources