Database Develop

Cant flash further with Odin

Ok i bricked phone after instaling a theme from Clockworkrecovery and it kept restarting all the time.I dwed march stock rom wich have only 1 file and i put it on PDA in Odin 1.30 and it stays on Setup Connection all the time.pls respond to this cause idk wat else to do.

sizzlers said:
Ok i bricked phone after instaling a theme from Clockworkrecovery and it kept restarting all the time.I dwed march stock rom wich have only 1 file and i put it on PDA in Odin 1.30 and it stays on Setup Connection all the time.pls respond to this cause idk wat else to do.
Click to expand...
Click to collapse
I guest you have to tick partition with .pit file included. Maybe you can try Darky's ROM that flash thru odin http://forum.xda-developers.com/showthread.php?t=940671
Read the whole thread and good luck.

follow this guide here flash Eclair than froyo
http://forum.xda-developers.com/showthread.php?t=847765
cheers

Do what angiogram says and it will work

Preference for a broken phone is to flash via Odin to Eclair using pit 512 and reparation checked .
The aim is to recover the phone to a working state you can then do what you want in the way of custom roms .
jje

keeps looping pleasssss help

hi updated my sgx from ultimate rom by kies to the official 2.3.3 but it was not routed i used how to root using xwjvb but it kept booting and rebooting ,so i went in to recovery and flashed with jues rom from this forum ,i thought great it all loaded but as soon as the lock screen comes on it boots back into boot screen and the back to the lock screen again,i am at the end of my tether i have been housr trying to sort this out ,shall i go back to stock rom or is there a cure for this i am eagerly awaiting someones answer many thanks

westentertainer said:
hi updated my sgx from ultimate rom by kies to the official 2.3.3 but it was not routed i used how to root using xwjvb but it kept booting and rebooting ,so i went in to recovery and flashed with jues rom from this forum ,i thought great it all loaded but as soon as the lock screen comes on it boots back into boot screen and the back to the lock screen again,i am at the end of my tether i have been housr trying to sort this out ,shall i go back to stock rom or is there a cure for this i am eagerly awaiting someones answer many thanks
Click to expand...
Click to collapse
i think its a bootloader problem...
flash GB XWJVH : http://dl.dropbox.com/u/19506141/Stock - stock modems/GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl.exe
this comes with safe bootloaders
with odin : http://dl.dropbox.com/u/19506141/flash en drivers/Odin_+_pit.exe
PITT512 is included, check repartition.
foor root acces flash file below in PDA, repartition NOT checked.
http://dl.dropbox.com/u/19506141/Gingerbread-GT-I9000-XWJVH-stock-kernel+hacks.tar

thanks where does flash go in odin i have put pit in pit

did not work i have now got the dreaded phone /caution /pc sign on screen

westentertainer said:
did not work i have now got the dreaded phone /caution /pc sign on screen
Click to expand...
Click to collapse
what did you fill in with the other PDA / PHONE / CSC....
you have to extract the .EXE file

richard2311 said:
what did you fill in with the other PDA / PHONE / CSC....
you have to extract the .EXE file
Click to expand...
Click to collapse
yes i extracted them and put them in the right places in odin but it went through the proces and then stoped ,now i can get into download bot odin does not state conected mmmmmm

westentertainer said:
yes i extracted them and put them in the right places in odin but it went through the proces and then stoped ,now i can get into download bot odin does not state conected mmmmmm
Click to expand...
Click to collapse
try different USB poort, or try other odin version.

it has set partition in first big box
then in message leave cs
enter cs for md5
check md5 do not unplug cable
please wait
checking md5 finished sucsessfuly
leave cs
setup conection
initiliasation
set pit file
do not turn off target
then nothing no movement or phone booting

richard2311 said:
try different USB poort, or try other odin version.
Click to expand...
Click to collapse
wich odin you sugest

westentertainer said:
wich odin you sugest
Click to expand...
Click to collapse
i always use V1.7...never have problems.
but you must not flash when you don't get added in textbox!!
and setting pitfile takes a little while (no to long) so be a (little) patient.

i managed to use EZBASE to get it up and running now ,shall i just conect to kies and get the official stock rom or flash from this rom ???/

westentertainer said:
i managed to use EZBASE to get it up and running now ,shall i just conect to kies and get the official stock rom or flash from this rom ???/
Click to expand...
Click to collapse
never worked with EZbase ??

Galaxy S ODIN Flash

Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs

Hi there,
afaik there are no CM Versions flashable via ODIN.Use ODIN to flash a Stock firmware, then install ClockworkModRecovery and Install CM9 via CWM.
You should try to take Out your Battery for about 5 minutes and try to enter Recovery Mode.
About the Odin Version: If you look at different "howto use ODIN tutorials" there are different Versions "recommended" I've used multiple ODIN Versions eg 1.3 / 1.83 and every Version made a good job.
Give this a try if Battery-out for 5 Minutes does't take you back to recovery
http://hdtechvideo.com/community/index.php?threads/flashing-rom-using-odin-step-by-step.64/
Regards
Geniac
Opson said:
Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs
Click to expand...
Click to collapse

Opson said:
Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs
Click to expand...
Click to collapse
you should flash the stock rom got 3 type file, that mean the file after download got pda, csc and modam file, like 2.3.6 XXjvu, please dont flash the file after download only have 1 file only, like XXjw5.

Problem my phone is stuck on download mode.

I tried rooting with the chainfire auto root thing and after the red android screen i got the green one again and its stuck,i tried taking out the battery a few times but its still not working.
Any help would be amazing.

Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full

JJEgan said:
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
Click to expand...
Click to collapse
I did and didnt find anything helpfull for my situation.
Also tried to root again but again its stuck on downloading... do not turn off target screen.

Boot to download mode and it says as it should Downloading do not turn off .
You are now supposed to flash the firmware via odin .
You should flash your stock firmware to get the phone working .
Then read the basic faqs and guides before you flash anything as its pointless flashing without reading the basics .
Or take it to a service centre .
jje

Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?

grpl said:
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck

grpl said:
thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
read the basics ignorance is no excuse .

ashraf sharif said:
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
Click to expand...
Click to collapse
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent

grpl said:
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
Click to expand...
Click to collapse
Is there a way to know my version/pda since i have no idea what stock rom to download

Device model no. in recovery mode
Hi,
Sorry to ask a random question. I Have my device model no. as S3 I9305 when I go to download mode and in my phone settings I can see my device model as S3 I9305T. I have recently installed Australian official firmware(XSA version without any career bloatware) in my phone, which is the S3 I9305T. I found it weird to have two different model nos. in 2 different places. When I first bought this phone it was the Telstra version, which is S3 I9305T. After that I changed many firmwares and installed S3 I9305 version from optus and other country's S3 I9305 version as well. Could you please tell me why is that?? Is this because I once installed I9305 firmware once? If that's the reason, today I flashed I9305T official firmware again with Odin. Is there any way to reset the download mode as well?? Please reply. Thanks.

grpl said:
Is there a way to know my version/pda since i have no idea what stock rom to download
Click to expand...
Click to collapse
Not unless you know what it is or saved the original .
You can just pick a stock rom for your area/ network .
If you bothered to read the basics their would be no need for all this ratting about .

@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.

dogmatism said:
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
Click to expand...
Click to collapse
So you run odin in windows.
Boot your phone to download mode
Connect device and wait for confirmation of connection in odin.
And then you click pda and choose a stock firmware.
And click start.

@tissot Odin gives fail error as I stated before. Am going to try 3 part odin package ive downloaded,.

recovery bootloop with N910T

Hello all developers
the problem start when my friend ask me to fix his mobile
the first look to the mobile is
when i click power on it's show Samsung logo with this word at the left top( recovery booting ... )then reboot after 2 seconds at-least
i have download the latest official Rom 5.1.1 from sammobile
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME
after flash with odin i remember that is must complete the installation after first reboot with android logo but there is nothing happened !! its always reboot with the same word ( recovery rebooting )
I have tired to flash many Roms
Many BL
Many Modem
try to flash PIT File and the same
try Emergency with Kies and nothing changed
Kies give me this information when i put the model
PDA : OK2 / CSC : OK2 / PHONE : OK2 (TMB)
the all info about this mobile :
Model : SM-N910T
S/N : RF8FC131QYY 14.12
IMEI : 356095064430028
when i enter Odin Mode thats appear
ODIN MODE (HIGH SPEED)
PRODUCT NAME : SM-910t
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK : OFF
KNOX WARRANTY VOID : 0x1 (4)
QUALCOMM SECUREBOOT : ENABLE (CBS)
RP SWREV : S1, T1 , R1 , A2 , P1
SECURE DOWNLOAD : ENABLE
UDC START
please help me to fix it with any rom ... I can't go recovery mode but i can go download mode with ODIN

Any help please

i have the same issue but im on verizon. Also kies doesnt recognize my phone and I can't get to recovery. Any help would be appreciated. otherwise i just have an expensive paperweight.

Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0

Had the same issue i tried all kinds of roms stock and custom nothing seemed to work bought a new battery didnt make a diff now my phone is dead

noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Can you share PIT file for 910t? My phone is just keep bootcycle no matter what I do with ODIN, and try to flash ROM after ODIN, it bombs out, and boot cycle...
Thanks.

I am stuck with the same thing
any help would be great I am some what of a noob to this

Anyone had luck solving this problem?

noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Link plz

waleedy said:
Link plz
Click to expand...
Click to collapse
I'm having the same problem. I'm not getting any errors, and I found and flashed the PIT file with the stock firmware. Still no boot. It just sits on the boot up screen. No recovery, no battery icon...no nothing.