Database Develop

Bricked Galaxy TAB 8.9 (GT-7300) - $20 reward for working solution

Hi,
So, I got a Samsung Galaxy TAB 8.9 (GT-7300) WiFi+3G. Nordic/European version. I have a long history of rooting and running custom ROM's on my Android devices, but this time i f##ed up a bit.
1. Installed root_original.zip from this thread by copying it on to the tablet and applying it from stock recovery.
2. Booted and installed Superuser and ROM Manager from Market.
3. Used ROM Manager to install CWM for Galaxy Tab 10.1 (Yes, I know...).
4. Tab would not boot, but I could still get in to download mode. Browsed some XDA threads and came across this guy who seemed to have the same problem. I did not see that he had a P7310 (WiFi only) tablet. So, I used Odin 1.85 to install the bootloader, which was for the P7310, not for P-7300. Now, the tablet boots but the display is just flickering, like it is using a wrong refresh rate or wrong resolution. Not at all possible to read anything, but I can still get into Download mode.
5. Installed stock rom from here, specifically this one: P7300XWLA2------2012 January----P7300NEELA1-----Nordic countries----
Still no luck. The tablet boots into Android but the display is still flickering.
$20 for anyone who gets me out of this mess

Can you come in recovery ?
Than try this?
http://forum.xda-developers.com/showthread.php?t=1519564
There is an option in CWM under the mount and storage tab where stands mount usb connection click on that and move this to your tab after that install it
I hope it will work!

You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Oh and btw, my advice is for free.

Hi safariking,
I can get in to recovery, but I'm unable to read anything, as the display is just flickering. I would need a press-by-press guide in order to perform the steps correctly... :/

Thanks kallt_kaffe, I'll try the swedish firmware and follow the guide step-by-step

kallt_kaffe said:
You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Click to expand...
Click to collapse
Installs correctly but does not fix my display problem.
kallt_kaffe said:
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
Click to expand...
Click to collapse
I followed the guide step-by-step. No errors occured during flashing.
kallt_kaffe said:
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Click to expand...
Click to collapse
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
kallt_kaffe said:
Oh and btw, my advice is for free.
Click to expand...
Click to collapse
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.

snubbel said:
Installs correctly but does not fix my display problem.
I followed the guide step-by-step. No errors occured during flashing.
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
Wooow that looks not good man i think you must return it back to samsung
you can run a logcat maybe

snubbel said:
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
If you turn it off and charge it, is the charging-mode-display also distorted?
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to General

kallt_kaffe said:
If you turn it off and charge it, is the charging-mode-display also distorted?
Click to expand...
Click to collapse
If I turn it off it automatically turns back on and boots Android. So I can't see if the "charging while turned off" icon is also distorted.
kallt_kaffe said:
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.
Click to expand...
Click to collapse
I left it in download mode last night, it's still turned on. I'll let the battery drain and see what happens when I connect the charger.
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?

snubbel said:
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?
Click to expand...
Click to collapse
I honestly do not know.

Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.

If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..

nirogu325 said:
Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.
Click to expand...
Click to collapse
Re-partitioning with the PIT file along with the ROM did not help :/

suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?

snubbel said:
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?
Click to expand...
Click to collapse
As long as you have the right drivers installed, no. That's my setup.

I had a similar issue. It occured only when I turned display off and on, both in android and in battery charging mode while powered off. I just went back to the store and got it replaced. xD
Anyway the flickering began to show up after flashing 3.2 back from a 4.0 rom... So I think there was something wrong with the bootloader.. Didnt find any tar file containing the original bootloader.. Perhaps someone here can make it for you

hey,
i got same problem after i tried to install cm9. now i cant install nothing (i formated cash, data, system and preload) no data factory reset working. i have nonstop bootloops and format cache and dalvik not working but cwm ist starting but not working really. but can start download mode too ... so i think its not a super-brick for my gt 7300 from switzerland.
so, i will try to download from samMobile the original firmware and to flash with odin. anybody knows a tutorial with odin for gt 7300? cant find nothing for pit, csc, tar ...
please help me
thx sophie from switzerland

suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
I have to say, I was about to send the tablet to samsung, it was dead, no rom, no boot, no partition, no USB connection to store, what save me was the Odin up load that you recommended me, the tablet was really crashed.
I Think that is a sollution for actually almost any problem on the tablet (a complete format, sure, but still a good solution for ROM problems).
anyway, Many Thanks!!!!!!

Newbie try to help.
Have you try to install another CMW version using odin? Maybe it's caused by wrong CMW version. Try CMW v5.5.0.4 here http://forum.xda-developers.com/showthread.php?t=1312218

No recovery but i still can access download mode

ok So any help will be greatly appreciated.
THis is what the issue is:- I am able to access download mode and via ODIN i can patch any firmware on to my phone but after ODIN is successful the phone Start with the SAMSUNG boot loader Splash screen before the kernel loads up and stays there. it doesn't go head . hence i do not have recovery mode. i have tried patching with stock firmware with PIT 512 . This didnt make any difference. I have tried DarkyROM 10.2 Resurrection and that hasnt helped either. I cannot for the life of me get the freaking phone to start up with a boot loop . Once i have a boot loop i can move forward and patch the kernel and get recovery mode . so is there any one out there who can help me with this issue. I have a USB jtag cable so getting into DOwnload mode is not an issue even if i lose 3 button combo .But i cannot get the phone to boot up with any firmware .
thank u in advance . I have a Samsung Galaxy s I9000

Hey
You can check these threads and see if it resolves your issue
http://forum.xda-developers.com/showthread.php?p=29635435#post29635435
http://forum.xda-developers.com/showthread.php?t=1802778

tchindalia said:
Hey
You can check these threads and see if it resolves your issue
http://forum.xda-developers.com/showthread.php?p=29635435#post29635435
http://forum.xda-developers.com/showthread.php?t=1802778
Click to expand...
Click to collapse
did both didnt help . the deal is i am able to run all of this but the freaking phone after patching does not go beyond the bootloader splash screen . I would also like to mention that prior to this i was running miui 4 ICS . my phone screen cracked and hence i gave it to fix the screen . when i got it back the phone guy fix the screen and ran a default samsung gb firmware on it after this the phone does not go beyond the Samsung Splash screen after which the kernel splash screen start and u get access to recovery mode.

Did you try flashing different ROMS, kernels or custom recovery? Since you can get into Download mode you could flash custom recovery and do factory reset from there.

divibyzero said:
Did you try flashing different ROMS, kernels or custom recovery? Since you can get into Download mode you could flash custom recovery and do factory reset from there.
Click to expand...
Click to collapse
done .. didnt help the moment u run a Darky Resurrection firmware that comes with Kernel . tries running different kernels directly .. it doesn't help .. im not sure what 2 do .

petesfer said:
done .. didnt help the moment u run a Darky Resurrection firmware that comes with Kernel . tries running different kernels directly .. it doesn't help .. im not sure what 2 do .
Click to expand...
Click to collapse
well if u come from ICS ...then u need to re partition ,when going back to stock!! very important
search threads for : Going back to GB from ICS i9000, this should help u gl

The easiest thing I have always done then that happens is to flash a kernel for that version that comes alone (like semaphore kernel) with Odin/Heimdall. It will come with its own recovery, so you have a starting point

Flash stock firmware and then do a factory reset from stock recovery since odin doesnt format back to rfs for you on /cache and /data i believe. Fixed it for me.

AlwaysDroid said:
Flash stock firmware and then do a factory reset from stock recovery since odin doesnt format back to rfs for you on /cache and /data i believe. Fixed it for me.
Click to expand...
Click to collapse
link. to a stock firmware . that does this? i did try stock firmware didn't help hence asking .. yeah that could be an issue.. the data and the cache wasnt wiped.. before switching to ginger bread.. mmm....

Any solution found?
Hello! Have you been able to solve the issue with inability to get to recovery?
I have exactly the same issue with my i9000...
petesfer said:
ok So any help will be greatly appreciated.
THis is what the issue is:- I am able to access download mode and via ODIN i can patch any firmware on to my phone but after ODIN is successful the phone Start with the SAMSUNG boot loader Splash screen before the kernel loads up and stays there. it doesn't go head . hence i do not have recovery mode. i have tried patching with stock firmware with PIT 512 . This didnt make any difference. I have tried DarkyROM 10.2 Resurrection and that hasnt helped either. I cannot for the life of me get the freaking phone to start up with a boot loop . Once i have a boot loop i can move forward and patch the kernel and get recovery mode . so is there any one out there who can help me with this issue. I have a USB jtag cable so getting into DOwnload mode is not an issue even if i lose 3 button combo .But i cannot get the phone to boot up with any firmware .
thank u in advance . I have a Samsung Galaxy s I9000
Click to expand...
Click to collapse

ma-dis said:
Hello! Have you been able to solve the issue with inability to get to recovery?
I have exactly the same issue with my i9000...
Click to expand...
Click to collapse
Your problem seems to be partition related. What I do is use ODIN to flash Mily's Rom 1.2 - this one repartitions your phone (must have it checked in ODIN). Phone takes about 15 minutes to go through repartition and startup process.
After that flash any newer GB from recovery menu ...

petesfer said:
ok So any help will be greatly appreciated.
THis is what the issue is:- I am able to access download mode and via ODIN i can patch any firmware on to my phone but after ODIN is successful the phone Start with the SAMSUNG boot loader Splash screen before the kernel loads up and stays there. it doesn't go head . hence i do not have recovery mode. i have tried patching with stock firmware with PIT 512 . This didnt make any difference. I have tried DarkyROM 10.2 Resurrection and that hasnt helped either. I cannot for the life of me get the freaking phone to start up with a boot loop . Once i have a boot loop i can move forward and patch the kernel and get recovery mode . so is there any one out there who can help me with this issue. I have a USB jtag cable so getting into DOwnload mode is not an issue even if i lose 3 button combo .But i cannot get the phone to boot up with any firmware .
thank u in advance . I have a Samsung Galaxy s I9000
Click to expand...
Click to collapse
u mean flash kernel,rom etc. not patch

Soft bricked i9305, stuck on samsung logo, please help

I belive I soft bricked my i9305 when I tried to install Chainfire3D. I get stuck on the samsung logo but I can still access recovery. I did a CWM backup in Rom manager before it soft bricked but I cant access the backup from the default Recovery and I never flashed into CWM Recovery. So I wonder if I can flash CWM recovery from default recovery so I can reach my backup. Factory reset did not help, still stuck on Samsung logo. I tried flashing 2 roms but I get a error message E:Failed to verify whoe-file signature, E: signature verification failed. I can also add that I did not use Odin to root my device, I used Framaroot. I have no idea what my region number is and such so I'm not sure I can flash the stock rom ether.
Any kind of help is appreciated.

Fragda said:
I belive I soft bricked my i9305 when I tried to install Chainfire3D. I get stuck on the samsung logo but I can still access recovery. I did a CWM backup in Rom manager before it soft bricked but I cant access the backup from the default Recovery and I never flashed into CWM Recovery. So I wonder if I can flash CWM recovery from default recovery so I can reach my backup. Factory reset did not help, still stuck on Samsung logo. I tried flashing 2 roms but I get a error message E:Failed to verify whoe-file signature, E: signature verification failed. I can also add that I did not use Odin to root my device, I used Framaroot. I have no idea what my region number is and such so I'm not sure I can flash the stock rom ether.
Any kind of help is appreciated.
Click to expand...
Click to collapse
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1

Also wrong forum. This is the i9300 Q&A not i9305 Q&A
You can use the report button in the top right of your post /!\ to move it to the right location, which is here: http://forum.xda-developers.com/forumdisplay.php?f=1822

crisnar said:
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1
Click to expand...
Click to collapse
Ok but the problem is that I cannot enter download mode because I did not root with Odin. So I cannot connect my phone to odin yet. Any idea?

Fragda said:
Ok but the problem is that I cannot enter download mode because I did not root with Odin. So I cannot connect my phone to odin yet. Any idea?
Click to expand...
Click to collapse
A good idea would be for you to read the basic faqs and guides first .
ODIN and Root have nothing at all to do with entering download mode .
No download mode means you require a service centre repair .
jje

I can not enter adb shell ether because I never had the chance to enable usb debugging. Is service center really the only way? I can still install files from default recovery.

yes. sadly service center is the only option you have now
Sent from my GT-I9300 using XDA Premium 4 mobile app

crisnar said:
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1
Click to expand...
Click to collapse
You were totally right! Now CWM recovery works.
JJEgan said:
A good idea would be for you to read the basic faqs and guides first .
ODIN and Root have nothing at all to do with entering download mode .
No download mode means you require a service centre repair .
jje
Click to expand...
Click to collapse
I finaly made it work, now I can acess odin and Download mode.
However I still dont know due to the fact that none of my roms I try to install with CWM Recovery works (error 7) I got a GT-I9305N so I'm still stuck, thinking about flashing the stock rom I downloaded from sammobile through odin although I'm not sure how.
Thanks so far guys.

Flash stock and get the phone working .
jje

Fragda said:
You were totally right! Now CWM recovery works.
I finaly made it work, now I can acess odin and Download mode.
However I still dont know due to the fact that none of my roms I try to install with CWM Recovery works (error 7) I got a GT-I9305N so I'm still stuck, thinking about flashing the stock rom I downloaded from sammobile through odin although I'm not sure how.
Thanks so far guys.
Click to expand...
Click to collapse
Give me the link to the rom you want flash. The backup you have made not work?

I finaly got everything to work!
I flashed stock rom that I downloaded from sammobile through odin. I want to thank you guys so much for helping me out, it wasn't a easy road. Chainfire 3D ruined everything for me but I should have been more careful with installing that. Hopefully I can find something better to make the textures not all white in HD games but thats a different story.
Thanks again everyone!

I NEED HELP! Im a noob, i have a samsung S3 GT-i9305 ( GT-I9305GSMH) And i have soft bricked it by flashing a PDA that was meant for only i9300 - i then tried recovring it by doing alot of stuff but it wont work ... does anyone have any idea on how to fix this problem ? please .... btw i was using odin to root my phone but the cu*t fukced me over.... help anyone.. im stuck in downloading mode please do not remove target..

[Q]Bootloop & No recovery Mode

Hello everyone ! I have a samsung galaxy s3 mini i8190
I flash CM , but i didn't like it so i tried to install with odin the original firmware.
Problem: Bootloop (logo Samsung Galaxy S3 Mini reboot infinite loop)
I can't enter in Recovery Mode, only i can enter in Download Mode
I use ODIN to try to install CWM , but still don't work..
And i have another problem. When I click start (in odin) it stops at SetupConnection, but if I disconnect & reconnect (usb) it starts flashing.
Please, help me.

Try to flash stock recovery instead of CWM.

tys0n said:
Try to flash stock recovery instead of CWM.
Click to expand...
Click to collapse
"I use ODIN to try to install CWM , but still don't work.."
I said this in the thread. If i'm wrong, please correct me.

Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.

Vladdyak47 said:
"I use ODIN to try to install CWM , but still don't work.."
I said this in the thread. If i'm wrong, please correct me.
Click to expand...
Click to collapse
Yes you did, but I asked you to try with STOCK RECOVERY instead.
It's not always a part of the official firmware package.

stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
Can you help me with the link? Flash with PDA, right? (select PDA files, connect the device and click start)
Which one is good? http://forum.xda-developers.com/showthread.php?t=2187295
P.S. : I resolved the problem with connection
P.S.2: In Download Mode i have "CUSTOM BINARY DOWNLOAD: YES (3 counts) :|
P.S.3: When i try to flash a original firmware, after device restart it's an android charging something
EDIT: Now i have a new problem: FIRMWARE UPDRAGE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN

Vladdyak47 said:
Can you help me with the link? Flash with PDA, right? (select PDA files, connect the device and click start)
Which one is good? http://forum.xda-developers.com/showthread.php?t=2187295
P.S. : I resolved the problem with connection
P.S.2: In Download Mode i have "CUSTOM BINARY DOWNLOAD: YES (3 counts) :|
P.S.3: When i try to flash a original firmware, after device restart it's an android charging something
EDIT: Now i have a new problem: FIRMWARE UPDRAGE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN
Click to expand...
Click to collapse
Download service firmware and solve all your problems
Then just flash whatever rom you'd like.

Thanks a lot tys0n ! My Phone works now!

Mine has the same problem! I flashed kernels and params as well!

stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
Solved !!! Thank you very very much, for all of u.. Worked ... Finally i can enter recovery mode and turn on my s3 mini.. . thanks XDA n really sorry for my english

stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
What if my device cant be recognised by my pc. Ive tried every pc/laptop I own with different OS. So basically I have a bootloop stuck phone with no recovery mode available and it doesnt connect to the pc. Is there any way to fix that? Or is the phone completely bricked and I cant do anything about it.
PS: I have tried installing latest samsung drivers on my pc but it still cant recognise the phone.
Have had this phone for 6 years and it was ****ing amazing. I missed this little guy and want to fix him just as a "souvenir" since it was my first ever smartphone.

[Q] bricked N7000. how to get working again

I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?

sejtam said:
I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
Click to expand...
Click to collapse
1st things 1st. Why would u use heimdall or odin? And what is your current ROM before trying to flash CM 10.3, was it stock? You should have looked for CWM recovery or Philz safe kernels as base when doing ROM flashing ESPECIALLY custom roms. From what you said, then can you still boot into download mode? I have no knowledge of heimdall so just download Stock Firmware, flash it with odin and see if you can boot your N7000 first.
The worst case scenarios is you are experiencing emmc bug-brick. go to the thread and read carefully to deduce your type of 'brick' and find solutions there. Good Luck.

I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?

sejtam said:
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
Click to expand...
Click to collapse
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app

same problem
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated

i have the same problem

conanbrapp said:
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
Click to expand...
Click to collapse
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app

fixed miine
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Jackwu696 said:
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into

conanbrapp said:
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
Click to expand...
Click to collapse
If you're able to boot up properly n prompted to wipe, then do it. But do it in recovery not on device.

Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?

sejtam said:
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
Click to expand...
Click to collapse
Before that, do u have KIES installed? KIES is NOT compatible with odin and will cause potential trouble. So is some firewall and antivirus apps. You need to disable all of them before using odin. Please search the thread http://www.sammobile.com/firmwares/ for stock rom site.
Sent from my GT-N7000 using XDA Free mobile app

Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?

sejtam said:
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
Click to expand...
Click to collapse
Of course you fail... When using ODIN, U should have downloaded the .tar. if you downloaded a zip. then unzip it first to get the tar file, then you flash it with odin. All requests are included in the stock.tar And PLEASE DO NOT Play with PIT files if you don't know what you are doing.
So now what you need to do is. :
1. DISABLE KIES (Uninstall it better), Your firewall, antivirus.
2. Install CORRECT Samsung USB driver. (Search keyword "download samsung N7000 usb drivers")
3. Unzip your zip file and extract the tar.file.
4. Run ODIN as Administrator (Right click/run as)
5. Go to download mode. connect your device to Pc/laptop.
6. Wait until Odin detects your device, click AP/PDA and choose the tar file you extracted.
7. DO NOT tick partition.
8. Let it run

Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.

sejtam said:
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
Click to expand...
Click to collapse
Try updating your odin. Use the newest vers. And try and read this https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNGd2e3iG5hkDeo0KyAjGuCSfQSLUw . If All fails then it's a confirmed SUPER-BRICK and there's nothing except samsung service centre can help you now... Sorry for not being able to help more..

Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...

sejtam said:
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
Click to expand...
Click to collapse
His link to ROMS were basically the same ones you can download at sammobile.