ok So any help will be greatly appreciated.
THis is what the issue is:- I am able to access download mode and via ODIN i can patch any firmware on to my phone but after ODIN is successful the phone Start with the SAMSUNG boot loader Splash screen before the kernel loads up and stays there. it doesn't go head . hence i do not have recovery mode. i have tried patching with stock firmware with PIT 512 . This didnt make any difference. I have tried DarkyROM 10.2 Resurrection and that hasnt helped either. I cannot for the life of me get the freaking phone to start up with a boot loop . Once i have a boot loop i can move forward and patch the kernel and get recovery mode . so is there any one out there who can help me with this issue. I have a USB jtag cable so getting into DOwnload mode is not an issue even if i lose 3 button combo .But i cannot get the phone to boot up with any firmware .
thank u in advance . I have a Samsung Galaxy s I9000
Hey
You can check these threads and see if it resolves your issue
http://forum.xda-developers.com/showthread.php?p=29635435#post29635435
http://forum.xda-developers.com/showthread.php?t=1802778
tchindalia said:
Hey
You can check these threads and see if it resolves your issue
http://forum.xda-developers.com/showthread.php?p=29635435#post29635435
http://forum.xda-developers.com/showthread.php?t=1802778
Click to expand...
Click to collapse
did both didnt help . the deal is i am able to run all of this but the freaking phone after patching does not go beyond the bootloader splash screen . I would also like to mention that prior to this i was running miui 4 ICS . my phone screen cracked and hence i gave it to fix the screen . when i got it back the phone guy fix the screen and ran a default samsung gb firmware on it after this the phone does not go beyond the Samsung Splash screen after which the kernel splash screen start and u get access to recovery mode.
Did you try flashing different ROMS, kernels or custom recovery? Since you can get into Download mode you could flash custom recovery and do factory reset from there.
divibyzero said:
Did you try flashing different ROMS, kernels or custom recovery? Since you can get into Download mode you could flash custom recovery and do factory reset from there.
Click to expand...
Click to collapse
done .. didnt help the moment u run a Darky Resurrection firmware that comes with Kernel . tries running different kernels directly .. it doesn't help .. im not sure what 2 do .
petesfer said:
done .. didnt help the moment u run a Darky Resurrection firmware that comes with Kernel . tries running different kernels directly .. it doesn't help .. im not sure what 2 do .
Click to expand...
Click to collapse
well if u come from ICS ...then u need to re partition ,when going back to stock!! very important
search threads for : Going back to GB from ICS i9000, this should help u gl
The easiest thing I have always done then that happens is to flash a kernel for that version that comes alone (like semaphore kernel) with Odin/Heimdall. It will come with its own recovery, so you have a starting point
Flash stock firmware and then do a factory reset from stock recovery since odin doesnt format back to rfs for you on /cache and /data i believe. Fixed it for me.
AlwaysDroid said:
Flash stock firmware and then do a factory reset from stock recovery since odin doesnt format back to rfs for you on /cache and /data i believe. Fixed it for me.
Click to expand...
Click to collapse
link. to a stock firmware . that does this? i did try stock firmware didn't help hence asking .. yeah that could be an issue.. the data and the cache wasnt wiped.. before switching to ginger bread.. mmm....
Any solution found?
Hello! Have you been able to solve the issue with inability to get to recovery?
I have exactly the same issue with my i9000...
petesfer said:
ok So any help will be greatly appreciated.
THis is what the issue is:- I am able to access download mode and via ODIN i can patch any firmware on to my phone but after ODIN is successful the phone Start with the SAMSUNG boot loader Splash screen before the kernel loads up and stays there. it doesn't go head . hence i do not have recovery mode. i have tried patching with stock firmware with PIT 512 . This didnt make any difference. I have tried DarkyROM 10.2 Resurrection and that hasnt helped either. I cannot for the life of me get the freaking phone to start up with a boot loop . Once i have a boot loop i can move forward and patch the kernel and get recovery mode . so is there any one out there who can help me with this issue. I have a USB jtag cable so getting into DOwnload mode is not an issue even if i lose 3 button combo .But i cannot get the phone to boot up with any firmware .
thank u in advance . I have a Samsung Galaxy s I9000
Click to expand...
Click to collapse
ma-dis said:
Hello! Have you been able to solve the issue with inability to get to recovery?
I have exactly the same issue with my i9000...
Click to expand...
Click to collapse
Your problem seems to be partition related. What I do is use ODIN to flash Mily's Rom 1.2 - this one repartitions your phone (must have it checked in ODIN). Phone takes about 15 minutes to go through repartition and startup process.
After that flash any newer GB from recovery menu ...
petesfer said:
ok So any help will be greatly appreciated.
THis is what the issue is:- I am able to access download mode and via ODIN i can patch any firmware on to my phone but after ODIN is successful the phone Start with the SAMSUNG boot loader Splash screen before the kernel loads up and stays there. it doesn't go head . hence i do not have recovery mode. i have tried patching with stock firmware with PIT 512 . This didnt make any difference. I have tried DarkyROM 10.2 Resurrection and that hasnt helped either. I cannot for the life of me get the freaking phone to start up with a boot loop . Once i have a boot loop i can move forward and patch the kernel and get recovery mode . so is there any one out there who can help me with this issue. I have a USB jtag cable so getting into DOwnload mode is not an issue even if i lose 3 button combo .But i cannot get the phone to boot up with any firmware .
thank u in advance . I have a Samsung Galaxy s I9000
Click to expand...
Click to collapse
u mean flash kernel,rom etc. not patch
Related
Bricked > Made Jig > Got in download mode > Flashing with Odin > Still loop problem
So i bricked my phone , my 3 button wasnt working , so i made a Jig (and super thanks to ppl who started that) ... got it in download mode, Now im flashing it with Odin and it goes through fine (sayin Pass and all that) but im still getting the same problem , either it gets stuck on the big S or the GT19000M keeps flashing...
anyone else got tht problem ? or what am i doing wrong ?
** I was using the Legendary Steel Edition rom before i messed up my phone
Now im trying to back to stock rom but it wont work
I have the Bell Galaxy S , if tht matters
zx6r_98 said:
So i bricked my phone , my 3 button wasnt working , so i made a Jig (and super thanks to ppl who started that) ... got it in download mode, Now im flashing it with Odin and it goes through fine (sayin Pass and all that) but im still getting the same problem , either it gets stuck on the big S or the GT19000M keeps flashing...
anyone else got tht problem ? or what am i doing wrong ?
** I was using the Legendary Steel Edition rom before i messed up my phone
Now im trying to back to stock rom but it wont work
I have the Bell Galaxy S , if tht matters
Click to expand...
Click to collapse
Its just a matter of getting the right rom jm8 for me and many others works well and repartition, pit etc if you tick repartition try not ticking it, pit and no pit etc
tragusman said:
Its just a matter of getting the right rom jm8 for me and many others works well and repartition, pit etc if you tick repartition try not ticking it, pit and no pit etc
Click to expand...
Click to collapse
I tried JH2 , and a whole bunch of other roms, so far no luck ... any other SGS Bell users ??? what is the stock rom for Bell GTI9000M ??
and is there any other way to find out what rom i was on ? lol
I finally got my phone to download mode and finally ODIN recognized my galaxy , now no roms are working
zx6r_98 said:
I tried JH2 , and a whole bunch of other roms, so far no luck ... any other SGS Bell users ??? what is the stock rom for Bell GTI9000M ??
and is there any other way to find out what rom i was on ? lol
I finally got my phone to download mode and finally ODIN recognized my galaxy , now no roms are working
Click to expand...
Click to collapse
JL2 is the stock rom you can get it from here http://forum.xda-developers.com/showthread.php?t=846913
For specific guide for bell go here http://forum.xda-developers.com/showthread.php?t=853950
Tried JM8 , JH2 , JH9 .... all of these didnt work ... any other ideas ?????
JH2 seems to take me to recovery mode after flashing, and then when i wipe all data and reboot , it gets stuck on the big S ... this is gettin on my nerves now
I can get it to recovery mode after flashing but i always get the error Cant mount sdcard...
any suggestions ?? does this mean my sd card is done ?
i had the same problem and here is how i fix'ed it:
i made a jig tool like you and got it into download mode then installed I9000XWJM8
useing odin. you can download it from samfirmware.com.
and while the phone was boting up i used adb.
while the phone is booting up try adb shell
if you get into the shell type "reboot recovery"
and install Clockworkmod from clockworkmod install a new firmware.
hope that works
it did for me.
zanderdk said:
i had the same problem and here is how i fix'ed it:
i made a jig tool like you and got it into download mode then installed I9000XWJM8
useing odin. you can download it from samfirmware.com.
and while the phone was boting up i used adb.
while the phone is booting up try adb shell
if you get into the shell type "reboot recovery"
and install Clockworkmod from clockworkmod install a new firmware.
hope that works
it did for me.
Click to expand...
Click to collapse
umm when exactly do i goto adb recovery mode ? when odin is finished with flashing and my phone goes to recovery ? and do i install clockworkmod frm adb then ???
and when in recovery mode it gives me the error .. : cant mount sdcard ... were u having the same problem ???
Your internal SD might be corrupt if you can get in to recovery after you flash and it gives you a error message it might be. If it is, it needs to be fixed by bell.
good luck
Hello buddies,
I was using my DarkyModded SGS i9K and all of a sudden my phone's lock screen got freezed and i tried it shutting down but i wont recognize ,then i had removed my battery and rebooted it.Now the problem comes !!
It wont Reboot i.e It's stuck on Galaxy S -powered by Darky ROM screen !
i tried with odin to reflash it back to stock,Reinstall Darkymod, Stock Froyo but no luck!!
but it booted into Stock 2.3.x and was booting very very slow @ 1FPS of sgs animation ,so i accessed the recovery but it was also too slow even it was taking the input after a sec , i wiped it and still no booting up and one more thing my phone displayed once the BSOD logo and now my sgs can go into download mode also but cant reboot after flashing with odin ,ezodin!!
I would be grateful if anybody snapped me out of this crap !
Thankyou!
If you can get into download mode, then flash stock with Odin, 2.2 is a good option, was for me anyway. Hope this helps.
Which odin roms have you tried?
knowledge is Power. Guard it well.
snapper.fishes said:
Which odin roms have you tried?
knowledge is Power. Guard it well.
Click to expand...
Click to collapse
EZodin 2.2 (Preroot+CWM3),Odin used for DarkyROM,Odin for Gingerbread ROM!
still no luck in booting !!
If you can get recovery, go to mount and storage then format everything. Then flash bootloader with ezboot and after that a stock rom with odin. It's just a try...maybe you're luck and it works
Sent from my GT-I9000 using XDA App
Drollo85 said:
If you can get recovery, go to mount and storage then format everything. Then flash bootloader with ezboot and after that a stock rom with odin. It's just a try...maybe you're luck and it works
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i was actually using stock recovery v3e and when i try to hit wipe-factory reset it says E:copy_dbdata_media:Can't unmount "/dbdata"
E:Format_volume failed to unmount "/dbdata"
now im goin to try heimdall for Cm7 maybe i got some luck in there!!
what is this problem ??
even the heimdall didn't gave me a hand!
didn't get it!!
:/
i've even tried this !!
http://forum.xda-developers.com/showthread.php?t=984140
still no boot!!
f*ck!
Sounds to me that u are going to have to format the system via recovery, and then flash stock 2.2 with Odin
bigmadpete said:
Sounds to me that u are going to have to format the system via recovery, and then flash stock 2.2 with Odin
Click to expand...
Click to collapse
can u give me a small instruction set to go through that method!
Ashtrix said:
can u give me a small instruction set to go through that method!
Click to expand...
Click to collapse
When flashing with Odin have you done a repartition?
Yep!
tried all possible ways!
:/
Re-format system, boot into recovery and go...mounts and storage-format system. Im no expert and please do this with caution and at your own risk. After format you will need to flash to 2.2 or something safe.
Already tried it says errors can't be formatted unable to unmount "/dbdata"!!
:/
please help me!!
:/
1st of all buy a jig, it will give you download mode and reset the counters. Have you maybe got a corrupt internal sd card ? See when this happened to me I flashed stock via Odin, then I rooted and got clockwork recovery and formated ststem, then a custom rom. Are you seeing recovery and download mode, or are you seeing a pc and triangle with a cross.
bigmadpete said:
1st of all buy a jig, it will give you download mode and reset the counters. Have you maybe got a corrupt internal sd card ? See when this happened to me I flashed stock via Odin, then I rooted and got clockwork recovery and formated ststem, then a custom rom. Are you seeing recovery and download mode, or are you seeing a pc and triangle with a cross.
Click to expand...
Click to collapse
Yep, i can go through the recovery and all but stuck in a bootloop !!
AFTER EZODIN3 rooted 2.2 or 2.3.4 Official...!!!
and when i try to format it gives the errors!!!
Why "EzOdin" whats wrong with Odin ?
bigmadpete said:
Why "EzOdin" whats wrong with Odin ?
Click to expand...
Click to collapse
Umm..so, if i get Odin 2.2 official then can i fix up my bootloader bootloop problem?
Yeah it helped me out, also pit files caused me problems in the past, my advice is get Odin v1.82 and froyo 2.2. Try it without the pit, just use Pda Phone and CSC. If it doesnt work try with the pit. Make sure the files are in correct boxes. Let me know friend
My Galaxy Ace is stuck in a reboot loop after trying to flash 2.3.6 onto it, when it had 2.3.5 on it previously.
I've used ODIN and no matter what firmware I try to flash onto it, it just goes into a reboot loop.
Any idea how to fix it?
Did you try to do a wipe?
vkanamekuran said:
Did you try to do a wipe?
Click to expand...
Click to collapse
A wipe worked! Thanks!
how to do a wipe please tell
mor1228 said:
how to do a wipe please tell
Click to expand...
Click to collapse
press down home button and then power on phone ...--> you will enter into recovery mode .
select wipe with help of volume keys and there you go out of bootloop
My Galaxy Ace is also in some sorta reboot loop.
Everything was working fine with it (phone is rooted and CWM installed) until I did a phone reset because I was giving the phone to my gf. After doing this the phone reboots, the blue samsung logo plays (without sound) and then repeats ad-infinitum. I can get into recovery mode and download mode ok and I've tried wipe and even restored a CWM backup (it says it was successful) but the phone just keeps rebooting. I can see the phone in odin but I've never tried to flash anything onto it and quite frankly I'm unsure whether it would just make things worse (if it needs to go back to Samsung for repair). Any help would be appreciated...
If you have cwm ..why dont you download some custom rom like cm7and flash it ..that would bring your phone back to life ...then you can downgrade to stock rom if you want ...and btw in cwm try cache partition , clear data /factory reset and clear dalvik cache ..see if it boots after you do this ..
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
when i always flash by odin or by cwm i always do wipe , wipe cache and wipe dalvik, this helps me everytime
I managed to flash a firmware from samfirmware and it fixed the reboot.
Now my issue is when I connect to Kies, it says there's an updated firmware for the phone but it fails every attempt to install it. I went back to samfirmware and found this firmware: S5830ZSKPD ## but when I download and extract it there's only 1 x MD5 file and 1 x DLL file?! The other firmware had the 4 or 5 files needed to include in Odin... any ideas guys?
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
rogers4759 said:
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Click to expand...
Click to collapse
Yep, that's exactly what it was, thanks again.
Unfortunately with this firmware, Kies doesn't recognise it and provides no info.
I flashed back to the older firmware... I'll just have to keep experimenting I guess.
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
dianpadi said:
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
Click to expand...
Click to collapse
Well I could flash it with Odin if I had the firmware but I don't.
It appears it's not available on SamFirmware.com
Do you know where I can download the following firmware?
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
Thanks
Lol I cant understand those firmwares ..can you tell me which version of android you want like 2.3.4/2.3.5/2.3.6 ...then ill be able to help you wanr
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Thanks anyway but I managed to find the firmware online and flashed it using Odin.
Now Kies says I'm using the latest which is a good start : )
Now I just need to find a way to root my SGS2 GT-I9100T
U can try a custom ROM from the Developer's forums here.
I also once stucked in the Reboot Loop..............
But then I installed a custom or if you want features from a official Rom, you can install Stock Based custom ROm from the Developer forums of Galaxy Ace. Really good Rom have been made by the developers
In the chance that someone else is looking for this latest OEM firmware update:
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
It can be downloaded from: http://translate.googleusercontent....flgljh&usg=ALkJrhiMpHV83dugh4RGwhKpyjIrYIgn2Q
It is in "one part file" format and can be flashed using Odin.
whatever may be the problem ......just rem to keep a backup of ur previously used rom and just flash it with cwm...
Progress?
Sent from my GT-S5830 using xda premium
Read all the previous no way out loop boot
Hi every body
i have installed cwm, custum firmware, every thing goes ok
tryed to use simlock remover, no message, turned off the Galaxy Ace but after rebooting, a continuous loop boot, no acces to recovery, flashing on wath ever firmware version with odin success but on rebooting the loop is back, help please.
PS : while flasing with odin : "big partition size!!"
Hey,
i wanted to flash from an unsafe kernel(ZCLP5) to a safe one and got the recent CM10 kernel (Kernel_CM10.1_20130130_Nightly_CWM.zip),
i then went into recovery mode and flashed the zip from sdcard and yeh here i am.
After the samsung logo appears i get a black screen and the software buttons flash once, no way to go into recovery or download mode.
When checking out the logcat with adb and grepping for "error" and "fail" i can see that the device fails to call eglInitialize (EGL_BAD_ALLOC) that, i guess, is initializing the OpenGL ES graphics lib.
So i'm a developer myself but not into android, where do i go from here?
Best greetings and thanks for support in advance.
What Rom did you have before?
I guess CM kernel doesn't work with your Rom (if it's TW).
Did you press the three buttons long enough for getting into recovery or download mode?
Easiest way: If you really do not get into recovery you should download a Stock Rom and install it with PC Odin.
ThaiDai said:
What Rom did you have before?
I guess CM kernel doesn't work with your Rom (if it's TW).
Did you press the three buttons long enough for getting into recovery or download mode?
Easiest way: If you really do not get into recovery you should download a Stock Rom and install it with PC Odin.
Click to expand...
Click to collapse
Hey,
yes i'm sure i pressed them long enough.
I was on one of the first ics releases ported from a galaxy S2 i'm quite sure this one:
http://forum.xda-developers.com/showthread.php?t=1516515
I guess for pc odin i need to be in download mode that is also not accessible :/
Tanks, and greetings.
EDIT:
Oh man somehow i get into download mode now, i swear i tried several times.
So you recommend that i flash stock rom now?
Will heimdall also work instead of odin?
lj_1102 said:
Hey,
yes i'm sure i pressed them long enough.
I was on one of the first ics releases ported from a galaxy S2 i'm quite sure this one:
http://forum.xda-developers.com/showthread.php?t=1516515
I guess for pc odin i need to be in download mode that is also not accessible :/
Tanks, and greetings.
EDIT:
Oh man somehow i get into download mode now, i swear i tried several times.
So you recommend that i flash stock rom now?
Will heimdall also work instead of odin?
Click to expand...
Click to collapse
Yes, heimdall will work I think.Flash a stock GB ROM.
So one of these will do it?
http://forum.xda-developers.com/showthread.php?t=1424997
lj_1102 said:
So one of these will do it?
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
yeah lookout for your country rom
Sent from my GT-N7000 using Tapatalk 2
Thanks for your support guys, after flashing stock rom, the stock launcher was broken but i was able to get to the settings via the status bar and by that enable usb debugging.
Then i pushed and installed clockwork recovery and after that flashed the current cyanogen mod.
:good:
Logo screen and no recovery mode
i installed german stock rom and then my phone wasnt opening properly then i closed phone and went into recovery mode did a wipe reset in CWM mode so damn me stupid i did something i shouldnt now i stuck in logo and cant get in to recovery mode
Desparoux said:
i installed german stock rom and then my phone wasnt opening properly then i closed phone and went into recovery mode did a wipe reset in CWM mode so damn me stupid i did something i shouldnt now i stuck in logo and cant get in to recovery mode
Click to expand...
Click to collapse
don't say that you have the stock kernel..! you might have hard bricked your note please consider the pit file method to recover it http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my GT-N7000 using Tapatalk 2
abhinav quietly brilliant said:
don't say that you have the stock kernel..! you might have hard bricked your note please consider the pit file method to recover it http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
yes was stock kernel what ever is that kernel i dont even know its name now the problem is people keep saying install kernel these that but i cant open that damn recovery mode in phone or just stuck in logo menu so sad me my lovely phone diedddddddddddddd
Desparoux said:
yes was stock kernel what ever is that kernel i dont even know its name now the problem is people keep saying install kernel these that but i cant open that damn recovery mode in phone or just stuck in logo menu so sad me my lovely phone diedddddddddddddd
Click to expand...
Click to collapse
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
i dont know how to use that pit my phone cant get into recovery mode if anybody knows it please help me to get out from this or show me a thread that some other people fixed this problem
warfareonly said:
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
Click to expand...
Click to collapse
hello can you be my guide how do i flash stock GB at this point im tottaly mess up with phone right now nobody help here i might lose some thread basically show me and i ll read i m scare to make my phone brick
---------- Post added at 03:52 PM ---------- Previous post was at 03:39 PM ----------
warfareonly said:
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
Click to expand...
Click to collapse
yes i can go on recovery mode and download mode now can u be my guide what to do
Desparoux said:
hello can you be my guide how do i flash stock GB at this point im tottaly mess up with phone right now nobody help here i might lose some thread basically show me and i ll read i m scare to make my phone brick
---------- Post added at 03:52 PM ---------- Previous post was at 03:39 PM ----------
yes i can go on recovery mode and download mode now can u be my guide what to do
Click to expand...
Click to collapse
download the rom from here http://forum.xda-developers.com/showthread.php?t=1424997
then you need to put the phone in download mode and connect to PC.. open odin and it should show that the phone is connected by showing a Yellow Box with COM:X
once this is done, place the rom (tar.md5 file) in the PDA tab (if only 1 rom file) and appropriate places if 3 rom files.
the press start.. the phone will start downloading. let it finish and the phone will reboot.. once done.. boot into recovery and choose factory reset. (GB rom is safe to reset using stock recovery)
nokiamodeln91 said:
download the rom from here http://forum.xda-developers.com/showthread.php?t=1424997
then you need to put the phone in download mode and connect to PC.. open odin and it should show that the phone is connected by showing a Yellow Box with COM:X
once this is done, place the rom (tar.md5 file) in the PDA tab (if only 1 rom file) and appropriate places if 3 rom files.
the press start.. the phone will start downloading. let it finish and the phone will reboot.. once done.. boot into recovery and choose factory reset. (GB rom is safe to reset using stock recovery)
Click to expand...
Click to collapse
THE PROBLEM İS NOW NAND writing start!! stuck what to do now please step by step im sooo noob and try to fix something i get moreee problemmm
Go to the above thread and download the pit file from there. Then in odin select the pit file under pit tab. This will auto tick the repartition option. Then select the rom in pda again. Reboot the phone into download mode and try again.
Freezing on nandwrite start is not a good sign.
nokiamodeln91 said:
Go to the above thread and download the pit file from there. Then in odin select the pit file under pit tab. This will auto tick the repartition option. Then select the rom in pda again. Reboot the phone into download mode and try again.
Freezing on nandwrite start is not a good sign.
Click to expand...
Click to collapse
hey doc all problem is fixed now new problem i did all and then flashed ics rom both way from kies or odin after i install ics its becomes freezing i really wonder why to buy a new sd card no problem for me i ll buy a 32 but why phone freezing* is there any thread to fix that or what is solution or no solution just replace the mboard
What did you do? Repartition?
If that.. Then use a small rom.. Like slimbean or cm roms. You could also try slimwizz. Big roms may not work properly.
nokiamodeln91 said:
What did you do? Repartition?
If that.. Then use a small rom.. Like slimbean or cm roms. You could also try slimwizz. Big roms may not work properly.
Click to expand...
Click to collapse
because they said so its only way to fix or if i did untick repartition will it still flash i wasnt sure there is no fix for that i dont like custom roms i think stock roms not bad about speed especailly 4.0.4 what if 4.1.2 come up ?
In this case, you could try with the J leaks which are small like slimwizz. Stock ICS roms are huge so may cause trouble. But you could try some stock based custom roms out there.
I tried rooting with the chainfire auto root thing and after the red android screen i got the green one again and its stuck,i tried taking out the battery a few times but its still not working.
Any help would be amazing.
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
JJEgan said:
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
Click to expand...
Click to collapse
I did and didnt find anything helpfull for my situation.
Also tried to root again but again its stuck on downloading... do not turn off target screen.
Boot to download mode and it says as it should Downloading do not turn off .
You are now supposed to flash the firmware via odin .
You should flash your stock firmware to get the phone working .
Then read the basic faqs and guides before you flash anything as its pointless flashing without reading the basics .
Or take it to a service centre .
jje
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
grpl said:
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
grpl said:
thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
read the basics ignorance is no excuse .
ashraf sharif said:
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
Click to expand...
Click to collapse
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
grpl said:
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
Click to expand...
Click to collapse
Is there a way to know my version/pda since i have no idea what stock rom to download
Device model no. in recovery mode
Hi,
Sorry to ask a random question. I Have my device model no. as S3 I9305 when I go to download mode and in my phone settings I can see my device model as S3 I9305T. I have recently installed Australian official firmware(XSA version without any career bloatware) in my phone, which is the S3 I9305T. I found it weird to have two different model nos. in 2 different places. When I first bought this phone it was the Telstra version, which is S3 I9305T. After that I changed many firmwares and installed S3 I9305 version from optus and other country's S3 I9305 version as well. Could you please tell me why is that?? Is this because I once installed I9305 firmware once? If that's the reason, today I flashed I9305T official firmware again with Odin. Is there any way to reset the download mode as well?? Please reply. Thanks.
grpl said:
Is there a way to know my version/pda since i have no idea what stock rom to download
Click to expand...
Click to collapse
Not unless you know what it is or saved the original .
You can just pick a stock rom for your area/ network .
If you bothered to read the basics their would be no need for all this ratting about .
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
dogmatism said:
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
Click to expand...
Click to collapse
So you run odin in windows.
Boot your phone to download mode
Connect device and wait for confirmation of connection in odin.
And then you click pda and choose a stock firmware.
And click start.
@tissot Odin gives fail error as I stated before. Am going to try 3 part odin package ive downloaded,.