Hello buddies,
I was using my DarkyModded SGS i9K and all of a sudden my phone's lock screen got freezed and i tried it shutting down but i wont recognize ,then i had removed my battery and rebooted it.Now the problem comes !!
It wont Reboot i.e It's stuck on Galaxy S -powered by Darky ROM screen !
i tried with odin to reflash it back to stock,Reinstall Darkymod, Stock Froyo but no luck!!
but it booted into Stock 2.3.x and was booting very very slow @ 1FPS of sgs animation ,so i accessed the recovery but it was also too slow even it was taking the input after a sec , i wiped it and still no booting up and one more thing my phone displayed once the BSOD logo and now my sgs can go into download mode also but cant reboot after flashing with odin ,ezodin!!
I would be grateful if anybody snapped me out of this crap !
Thankyou!
If you can get into download mode, then flash stock with Odin, 2.2 is a good option, was for me anyway. Hope this helps.
Which odin roms have you tried?
knowledge is Power. Guard it well.
snapper.fishes said:
Which odin roms have you tried?
knowledge is Power. Guard it well.
Click to expand...
Click to collapse
EZodin 2.2 (Preroot+CWM3),Odin used for DarkyROM,Odin for Gingerbread ROM!
still no luck in booting !!
If you can get recovery, go to mount and storage then format everything. Then flash bootloader with ezboot and after that a stock rom with odin. It's just a try...maybe you're luck and it works
Sent from my GT-I9000 using XDA App
Drollo85 said:
If you can get recovery, go to mount and storage then format everything. Then flash bootloader with ezboot and after that a stock rom with odin. It's just a try...maybe you're luck and it works
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i was actually using stock recovery v3e and when i try to hit wipe-factory reset it says E:copy_dbdata_media:Can't unmount "/dbdata"
E:Format_volume failed to unmount "/dbdata"
now im goin to try heimdall for Cm7 maybe i got some luck in there!!
what is this problem ??
even the heimdall didn't gave me a hand!
didn't get it!!
:/
i've even tried this !!
http://forum.xda-developers.com/showthread.php?t=984140
still no boot!!
f*ck!
Sounds to me that u are going to have to format the system via recovery, and then flash stock 2.2 with Odin
bigmadpete said:
Sounds to me that u are going to have to format the system via recovery, and then flash stock 2.2 with Odin
Click to expand...
Click to collapse
can u give me a small instruction set to go through that method!
Ashtrix said:
can u give me a small instruction set to go through that method!
Click to expand...
Click to collapse
When flashing with Odin have you done a repartition?
Yep!
tried all possible ways!
:/
Re-format system, boot into recovery and go...mounts and storage-format system. Im no expert and please do this with caution and at your own risk. After format you will need to flash to 2.2 or something safe.
Already tried it says errors can't be formatted unable to unmount "/dbdata"!!
:/
please help me!!
:/
1st of all buy a jig, it will give you download mode and reset the counters. Have you maybe got a corrupt internal sd card ? See when this happened to me I flashed stock via Odin, then I rooted and got clockwork recovery and formated ststem, then a custom rom. Are you seeing recovery and download mode, or are you seeing a pc and triangle with a cross.
bigmadpete said:
1st of all buy a jig, it will give you download mode and reset the counters. Have you maybe got a corrupt internal sd card ? See when this happened to me I flashed stock via Odin, then I rooted and got clockwork recovery and formated ststem, then a custom rom. Are you seeing recovery and download mode, or are you seeing a pc and triangle with a cross.
Click to expand...
Click to collapse
Yep, i can go through the recovery and all but stuck in a bootloop !!
AFTER EZODIN3 rooted 2.2 or 2.3.4 Official...!!!
and when i try to format it gives the errors!!!
Why "EzOdin" whats wrong with Odin ?
bigmadpete said:
Why "EzOdin" whats wrong with Odin ?
Click to expand...
Click to collapse
Umm..so, if i get Odin 2.2 official then can i fix up my bootloader bootloop problem?
Yeah it helped me out, also pit files caused me problems in the past, my advice is get Odin v1.82 and froyo 2.2. Try it without the pit, just use Pda Phone and CSC. If it doesnt work try with the pit. Make sure the files are in correct boxes. Let me know friend
Related
Dear Guru's...
I've flashed the SGS, with JS3 from samfirmware & odin...
Everything looks fine until reboot...
The phone keeps vibrating and do have the following error in recovery mode : 'Update media Can't mount dbdata..."
Conclusion it doesn't boot at all...
Any clues on how to solve that ?
ManyMany Thanks!
can u get recovery mode working ? if so try wipe cache and factory reset.
azzledazzle said:
can u get recovery mode working ? if so try wipe cache and factory reset.
Click to expand...
Click to collapse
Recovery is working, But i do have the error here : " Your storage is not prepared yet etc etc etc.."
And download mode also working...
Is there any rom that I can put ?
if you can get download mode working you can flash another ROM thru Odin, start of on a stock ROM then work your way back to a custom ROM if thats what u want.
http://forum.xda-developers.com/showthread.php?t=846913
I've got the same problem. Phone boots in both download and Recovery mode, but it cannot access internal SD since it was formatted in Ext4 by the lagfix (yes, I forgot to bring it back before using Odin).
Is there any way to solve this without sending the phone to Samsung?
azzledazzle said:
if you can get download mode working you can flash another ROM thru Odin, start of on a stock ROM then work your way back to a custom ROM if thats what u want.
http://forum.xda-developers.com/showthread.php?t=846913
Click to expand...
Click to collapse
The thing is " I use a stock rom from samfirmware...."...
flashing back to stock rom should remove the ext4 lagfix. did for me anyway.
link for stock firmware is in post above ^^^^
flash it again, and do re partition
azzledazzle said:
flash it again, and do re partition
Click to expand...
Click to collapse
Did that !
I'll try to do it with csc and modem file...
what is reset EFS Phone ?
I probably solved. I'm going to make a FULL flash to JPU with three files and PIT, then I'll upgrade to JS3, then will swith to a custom ROM.
This should work
sorry my mistake i assumed you already had 3 files and pit ... yeah that should work
dont tick EFS just the re partition and auto reboot f. reset time
matticala said:
I probably solved. I'm going to make a FULL flash to JPU with three files and PIT, then I'll upgrade to JS3, then will swith to a custom ROM.
This should work
Click to expand...
Click to collapse
I'll also try the 3 files method...
keep posted... download takes time !
Indeed solved
HOORAY !!!! i bet your heart was pumping out your chest lol
azzledazzle said:
HOORAY !!!! i bet your heart was pumping out your chest lol
Click to expand...
Click to collapse
Do you have any idea the CSC to you for last JS3 ?
should be included with the firmware u downloaded ??
azzledazzle said:
should be included with the firmware u downloaded ??
Click to expand...
Click to collapse
tHERE IS JUST ONE TAR FILE???
you can flash with just one file. jus put the .tar file into the PDA part of odin. and thats all u need to do. no pit no csc no nothing just PDA
Reboot problems also
Hi! I was just wondering is this method going to work even I have custom rom (Darkys extreme edition 9.0.2) installed ?
Only asking because something went terribly wrong, and phone just keeps rebooting all the time. So with odin + I9000XXJPY (stock firmware) everything goes back to normal? and after that I can start all over to see what went wrong
isokissa said:
Hi! I was just wondering is this method going to work even I have custom rom (Darkys extreme edition 9.0.2) installed ?
Only asking because something went terribly wrong, and phone just keeps rebooting all the time. So with odin + I9000XXJPY (stock firmware) everything goes back to normal? and after that I can start all over to see what went wrong
Click to expand...
Click to collapse
Edit: all worked no worries anymore
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!
Hi to who's reading - I need some urgent help.
I've deleted my firmware on my SGSi9000 (Darky's v10 ROM) - I went into recovery mode and pressed on wipe/factory reset thinking it'd take me back to 2.2...
Wow was I wrong.
I'm trying to flash with Odin right now to Eclair however it won't get past the 'SetupConnection' step in Odin...
Can anyone please tell me how I can get my phone to work again? Doesn't matter what firmware as I'll update with Kies.
Thanks...
factory reset just wipe the /data partition. Your phone should still be working.
Alright I just tried to get into recovery mode and now I get the Phone -> PC logo... Bricked?
geesamsungs said:
Alright I just tried to get into recovery mode and now I get the Phone -> PC logo... Bricked?
Click to expand...
Click to collapse
You can still fix it probably.
You can try odin again or adb, sorry I cant help you more becouse i dont know more
Instead of the 512.pit I used the 803.pit and it seemed to have worked so far, flashing to stock Eclair.
Okay no that didn't work...
Try the ezbase rom, easy peasy, clear intructions and choice of froyo or gb and both rooted
Sent from my GT-I9000 using XDA App
I saw the Phone --!-- PC once, but the 3-button-combo did still work (phew) and I got into download-mode.
Does Volume-down+Home+Power get you into download-mode?
Additionally you can try the steps described here: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen
Hello everyone,
I've got an Australian vodafone GT-i9000 which i bought that was having issues boot looping on power on. Sometimes it can boot loop for 20 seconds (looping at the Samsung screen, not the S screen) while others it can boot loop for 20 minutes before powering on.
I've tried flashing with ODIN using the 512 pit to numerous stock versions, most recently this : GT_I9000_XWJVP_XXJVQ_VAUJV6_Sbl (stock vodafone AU rom). The flash goes fine, however if I select format with the 512 PIT I can get the following message after the reboot:
E:format_volume: rfs format failed on /dev/block/mmcblkop2
Even if this message doesn't come up on flash, The phone keeps boot looping. Once started, the phone seems to work fine detecting internal & SD memory. I want a more permanent fix however, because if I was planning on giving it to a friend and 'leaving the phone boot looping until it starts' is probably too hard for them to understand. Also I'm not sure if there's an issue with the internalSD which is causing the problem, and if it is, it could cause further issues on more harder use.
Anyone had this sort of issue? The phone was flashed with ICS when the guy sent it to me, he said the bootloops started after he upgraded to ICS. I've got a 32gb SD- tried removing before flash and having it in while flash with no success (have seen a guide for installing on external SD for the i9000m- however it looks like you can only do this if the media device has completely failed). It seems to boot every time using a bootloader kernal (cant remember the name, ICE something from memory) into the recovery software- so maybe a busted sector on the internal SD?
Ideas anyone?
Cheers,
Dylan
Maybe try going into cwm wipe internal same card memory, remove external as card, put into download mode and flash with Odin using pit and repetition checked, if you get the devblock error flash this is PDA without repetition checked and without pit http://forum.xda-developers.com/showthread.php?t=984140
Sent from my GT-I9000 running remICS-UX using XDA premium
calum96 said:
Maybe try going into cwm wipe internal same card memory, remove external as card, put into download mode and flash with Odin using pit and repetition checked, if you get the devblock error flash this is PDA without repetition checked and without pit http://forum.xda-developers.com/showthread.php?t=984140
Sent from my GT-I9000 running remICS-UX using XDA premium
Click to expand...
Click to collapse
Thanks for the tip man, will give it a go now
dillzy1986 said:
Thanks for the tip man, will give it a go now
Click to expand...
Click to collapse
After second reboot after following your steps the boot looping started again. Any more ideas matey?
Is there any error when flashing in Odin or after and it opens the does on the the phone? Applying csc ect? If so what do the errors say?
Sent from my GT-I9000 running remICS-UX using XDA premium
calum96 said:
Is there any error when flashing in Odin or after and it opens the does on the the phone? Applying csc ect? If so what do the errors say?
Sent from my GT-I9000 running remICS-UX using XDA premium
Click to expand...
Click to collapse
Theres an error message about the CSC but it flicks up so quick i cant see it. It's not in red however- its just in yellow text. I'll see if i can get an error message outta it.
Hmm try flashing the cf root kernel with Odin after the install, don't tick repetition
Sent from my GT-I9000 running remICS-UX using XDA premium
1. Flash Stock Rom WITH BOOTLOADER !!!
2. Problem should be solved :/
OR
Get a stock rom from KIES !
after that you can apply your custom rom...
saphirrot said:
1. Flash Stock Rom WITH BOOTLOADER !!!
2. Problem should be solved :/
OR
Get a stock rom from KIES !
after that you can apply your custom rom...
Click to expand...
Click to collapse
Bit of a problem with that matey, Kies says the phone does not support firmware updates through KEIS and the rom i've been flashing with KEIS is the full standard rom from Vodafone- includes CSC, PDA and phone files. from memory the PDA file contains the standard bootloader yeah?
Look at this
Take a Firmware with the red SBL ending, thats with bootloader, flash it in download mode via odin and the problem should and must be solved through this !!
btw: i recommend to flash a JW5 version.. please tell us if this worked !
Did you get a look at the error? Or try flashing the cf root kernel?
Sent from my GT-I9000 running remICS-UX using XDA premium
saphirrot said:
Look at this
Take a Firmware with the red SBL ending, thats with bootloader, flash it in download mode via odin and the problem should and must be solved through this !!
btw: i recommend to flash a JW5 version.. please tell us if this worked !
Click to expand...
Click to collapse
GT_I9000_XWJVP_XXJVQ_VAUJV6_Sbl is the firmware i'm using, so no good with the boot loader
I'll try a JW5 version as suggested .
Also to the guy above, no luck with getting the error message, i'll give it another flash now and see how it goes.
Cheers guys really appreciate it
hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help
expansion11 said:
hello my samsung galaxy s advance (i9070) won boot after i installed this recovery tool an then i tried different firmware and kernels but its not working plz help
Click to expand...
Click to collapse
how did you flash? odin or dd method? and is phone name and logo coming?
Brainiac.shri said:
how did you flash? odin or dd method? and is phone name and logo coming?
Click to expand...
Click to collapse
im using odin and i see the logo noting more
can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again
adamuadamu said:
can you enter recovery (vol up+menu+power) or download mode (vol down+menu+power)?
if you can get into recovery, do wipe dalvik->reboot and tell us what happens
if download - flash your country's whole rom with odin and start again
Click to expand...
Click to collapse
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool
expansion11 said:
i can go in download mode and i did try stock roms and kernels bit it wont work and cant access the recovery tool
Click to expand...
Click to collapse
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.
Brainiac.shri said:
were you using JB or GB, accordingly flash the samsung stock ROM and after "PASS" in ODIN remove battery and factoy reset,it should work.
Click to expand...
Click to collapse
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?
Одг: [Q] phone won't boot
expansion11 said:
i think i was using GB, and i flashed the stock rom and i how do i factory reset it when i can't get in the recovery mode?
Click to expand...
Click to collapse
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance
shut_down said:
That sounds like you had jb, that happend to me when I flashed GB over JB.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong
Одг: [Q] phone won't boot
expansion11 said:
yes i had JB but that ron was not for my country so i could not connect to the mobile network so i wanted to get the right version but the download was slow so i wanted to get a diffrent kernal but then it went wrong
Click to expand...
Click to collapse
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance
shut_down said:
Flash JB again. Then folow turorial how to get GB back. You have that on General I think, or on Developer part of forum. Look.
Its not gonna work if you just flashed GB, I know from my expirience.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks that worked!
Одг: [Q] phone won't boot
expansion11 said:
Thanks that worked!
Click to expand...
Click to collapse
Sent from Galaxy S Advance
so what are you using now? GB or JB? i had that problem too...it booted well jbean and im stuck at seup wizard error pop out... i cant acceess also recovery mode but download mode is ok... im now back at Gbread but i still wanted my cp to be on JBean is there a force mothod? to pass error "unfortunately, samsung setup wizard has stoped?" i had this problem same exact one...
Still problem with booting
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"
x-samsung said:
I have tried to flash many different firmwares. ODIN says green but the phone does not boot. Just the first logo or Samsung with some animation.. than it gets stuck there. ADB does not work then either.
I have tried to root and wipe data with different ODIN, but nothing helped. TWRP is not present on "download mode" either..
On ODIN3 v3.07 I see there there is a tickbox for "NAND ERASE ALL" but when I have it checked it fails or hands on erase state.
Could you please help me what I can do next?
I would like to have complete firmware and root and install TWRP etc. but I need to get booting up ok. I have already 15 on "custome binory download"
Click to expand...
Click to collapse
after flashing.. remove / replace your battery..
try booting in recovery by pressing vol up+home+power at the same time..
then scroll down to factory reset via vol keys..
wipe and restore factory settings..