Dear Guru's...
I've flashed the SGS, with JS3 from samfirmware & odin...
Everything looks fine until reboot...
The phone keeps vibrating and do have the following error in recovery mode : 'Update media Can't mount dbdata..."
Conclusion it doesn't boot at all...
Any clues on how to solve that ?
ManyMany Thanks!
can u get recovery mode working ? if so try wipe cache and factory reset.
azzledazzle said:
can u get recovery mode working ? if so try wipe cache and factory reset.
Click to expand...
Click to collapse
Recovery is working, But i do have the error here : " Your storage is not prepared yet etc etc etc.."
And download mode also working...
Is there any rom that I can put ?
if you can get download mode working you can flash another ROM thru Odin, start of on a stock ROM then work your way back to a custom ROM if thats what u want.
http://forum.xda-developers.com/showthread.php?t=846913
I've got the same problem. Phone boots in both download and Recovery mode, but it cannot access internal SD since it was formatted in Ext4 by the lagfix (yes, I forgot to bring it back before using Odin).
Is there any way to solve this without sending the phone to Samsung?
azzledazzle said:
if you can get download mode working you can flash another ROM thru Odin, start of on a stock ROM then work your way back to a custom ROM if thats what u want.
http://forum.xda-developers.com/showthread.php?t=846913
Click to expand...
Click to collapse
The thing is " I use a stock rom from samfirmware...."...
flashing back to stock rom should remove the ext4 lagfix. did for me anyway.
link for stock firmware is in post above ^^^^
flash it again, and do re partition
azzledazzle said:
flash it again, and do re partition
Click to expand...
Click to collapse
Did that !
I'll try to do it with csc and modem file...
what is reset EFS Phone ?
I probably solved. I'm going to make a FULL flash to JPU with three files and PIT, then I'll upgrade to JS3, then will swith to a custom ROM.
This should work
sorry my mistake i assumed you already had 3 files and pit ... yeah that should work
dont tick EFS just the re partition and auto reboot f. reset time
matticala said:
I probably solved. I'm going to make a FULL flash to JPU with three files and PIT, then I'll upgrade to JS3, then will swith to a custom ROM.
This should work
Click to expand...
Click to collapse
I'll also try the 3 files method...
keep posted... download takes time !
Indeed solved
HOORAY !!!! i bet your heart was pumping out your chest lol
azzledazzle said:
HOORAY !!!! i bet your heart was pumping out your chest lol
Click to expand...
Click to collapse
Do you have any idea the CSC to you for last JS3 ?
should be included with the firmware u downloaded ??
azzledazzle said:
should be included with the firmware u downloaded ??
Click to expand...
Click to collapse
tHERE IS JUST ONE TAR FILE???
you can flash with just one file. jus put the .tar file into the PDA part of odin. and thats all u need to do. no pit no csc no nothing just PDA
Reboot problems also
Hi! I was just wondering is this method going to work even I have custom rom (Darkys extreme edition 9.0.2) installed ?
Only asking because something went terribly wrong, and phone just keeps rebooting all the time. So with odin + I9000XXJPY (stock firmware) everything goes back to normal? and after that I can start all over to see what went wrong
isokissa said:
Hi! I was just wondering is this method going to work even I have custom rom (Darkys extreme edition 9.0.2) installed ?
Only asking because something went terribly wrong, and phone just keeps rebooting all the time. So with odin + I9000XXJPY (stock firmware) everything goes back to normal? and after that I can start all over to see what went wrong
Click to expand...
Click to collapse
Edit: all worked no worries anymore
Related
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!
Hello buddies,
I was using my DarkyModded SGS i9K and all of a sudden my phone's lock screen got freezed and i tried it shutting down but i wont recognize ,then i had removed my battery and rebooted it.Now the problem comes !!
It wont Reboot i.e It's stuck on Galaxy S -powered by Darky ROM screen !
i tried with odin to reflash it back to stock,Reinstall Darkymod, Stock Froyo but no luck!!
but it booted into Stock 2.3.x and was booting very very slow @ 1FPS of sgs animation ,so i accessed the recovery but it was also too slow even it was taking the input after a sec , i wiped it and still no booting up and one more thing my phone displayed once the BSOD logo and now my sgs can go into download mode also but cant reboot after flashing with odin ,ezodin!!
I would be grateful if anybody snapped me out of this crap !
Thankyou!
If you can get into download mode, then flash stock with Odin, 2.2 is a good option, was for me anyway. Hope this helps.
Which odin roms have you tried?
knowledge is Power. Guard it well.
snapper.fishes said:
Which odin roms have you tried?
knowledge is Power. Guard it well.
Click to expand...
Click to collapse
EZodin 2.2 (Preroot+CWM3),Odin used for DarkyROM,Odin for Gingerbread ROM!
still no luck in booting !!
If you can get recovery, go to mount and storage then format everything. Then flash bootloader with ezboot and after that a stock rom with odin. It's just a try...maybe you're luck and it works
Sent from my GT-I9000 using XDA App
Drollo85 said:
If you can get recovery, go to mount and storage then format everything. Then flash bootloader with ezboot and after that a stock rom with odin. It's just a try...maybe you're luck and it works
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i was actually using stock recovery v3e and when i try to hit wipe-factory reset it says E:copy_dbdata_media:Can't unmount "/dbdata"
E:Format_volume failed to unmount "/dbdata"
now im goin to try heimdall for Cm7 maybe i got some luck in there!!
what is this problem ??
even the heimdall didn't gave me a hand!
didn't get it!!
:/
i've even tried this !!
http://forum.xda-developers.com/showthread.php?t=984140
still no boot!!
f*ck!
Sounds to me that u are going to have to format the system via recovery, and then flash stock 2.2 with Odin
bigmadpete said:
Sounds to me that u are going to have to format the system via recovery, and then flash stock 2.2 with Odin
Click to expand...
Click to collapse
can u give me a small instruction set to go through that method!
Ashtrix said:
can u give me a small instruction set to go through that method!
Click to expand...
Click to collapse
When flashing with Odin have you done a repartition?
Yep!
tried all possible ways!
:/
Re-format system, boot into recovery and go...mounts and storage-format system. Im no expert and please do this with caution and at your own risk. After format you will need to flash to 2.2 or something safe.
Already tried it says errors can't be formatted unable to unmount "/dbdata"!!
:/
please help me!!
:/
1st of all buy a jig, it will give you download mode and reset the counters. Have you maybe got a corrupt internal sd card ? See when this happened to me I flashed stock via Odin, then I rooted and got clockwork recovery and formated ststem, then a custom rom. Are you seeing recovery and download mode, or are you seeing a pc and triangle with a cross.
bigmadpete said:
1st of all buy a jig, it will give you download mode and reset the counters. Have you maybe got a corrupt internal sd card ? See when this happened to me I flashed stock via Odin, then I rooted and got clockwork recovery and formated ststem, then a custom rom. Are you seeing recovery and download mode, or are you seeing a pc and triangle with a cross.
Click to expand...
Click to collapse
Yep, i can go through the recovery and all but stuck in a bootloop !!
AFTER EZODIN3 rooted 2.2 or 2.3.4 Official...!!!
and when i try to format it gives the errors!!!
Why "EzOdin" whats wrong with Odin ?
bigmadpete said:
Why "EzOdin" whats wrong with Odin ?
Click to expand...
Click to collapse
Umm..so, if i get Odin 2.2 official then can i fix up my bootloader bootloop problem?
Yeah it helped me out, also pit files caused me problems in the past, my advice is get Odin v1.82 and froyo 2.2. Try it without the pit, just use Pda Phone and CSC. If it doesnt work try with the pit. Make sure the files are in correct boxes. Let me know friend
Hi,
So, I got a Samsung Galaxy TAB 8.9 (GT-7300) WiFi+3G. Nordic/European version. I have a long history of rooting and running custom ROM's on my Android devices, but this time i f##ed up a bit.
1. Installed root_original.zip from this thread by copying it on to the tablet and applying it from stock recovery.
2. Booted and installed Superuser and ROM Manager from Market.
3. Used ROM Manager to install CWM for Galaxy Tab 10.1 (Yes, I know...).
4. Tab would not boot, but I could still get in to download mode. Browsed some XDA threads and came across this guy who seemed to have the same problem. I did not see that he had a P7310 (WiFi only) tablet. So, I used Odin 1.85 to install the bootloader, which was for the P7310, not for P-7300. Now, the tablet boots but the display is just flickering, like it is using a wrong refresh rate or wrong resolution. Not at all possible to read anything, but I can still get into Download mode.
5. Installed stock rom from here, specifically this one: P7300XWLA2------2012 January----P7300NEELA1-----Nordic countries----
Still no luck. The tablet boots into Android but the display is still flickering.
$20 for anyone who gets me out of this mess
Can you come in recovery ?
Than try this?
http://forum.xda-developers.com/showthread.php?t=1519564
There is an option in CWM under the mount and storage tab where stands mount usb connection click on that and move this to your tab after that install it
I hope it will work!
You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Oh and btw, my advice is for free.
Hi safariking,
I can get in to recovery, but I'm unable to read anything, as the display is just flickering. I would need a press-by-press guide in order to perform the steps correctly... :/
Thanks kallt_kaffe, I'll try the swedish firmware and follow the guide step-by-step
kallt_kaffe said:
You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Click to expand...
Click to collapse
Installs correctly but does not fix my display problem.
kallt_kaffe said:
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
Click to expand...
Click to collapse
I followed the guide step-by-step. No errors occured during flashing.
kallt_kaffe said:
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Click to expand...
Click to collapse
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
kallt_kaffe said:
Oh and btw, my advice is for free.
Click to expand...
Click to collapse
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
snubbel said:
Installs correctly but does not fix my display problem.
I followed the guide step-by-step. No errors occured during flashing.
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
Wooow that looks not good man i think you must return it back to samsung
you can run a logcat maybe
snubbel said:
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
If you turn it off and charge it, is the charging-mode-display also distorted?
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to General
kallt_kaffe said:
If you turn it off and charge it, is the charging-mode-display also distorted?
Click to expand...
Click to collapse
If I turn it off it automatically turns back on and boots Android. So I can't see if the "charging while turned off" icon is also distorted.
kallt_kaffe said:
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.
Click to expand...
Click to collapse
I left it in download mode last night, it's still turned on. I'll let the battery drain and see what happens when I connect the charger.
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?
snubbel said:
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?
Click to expand...
Click to collapse
I honestly do not know.
Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
nirogu325 said:
Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.
Click to expand...
Click to collapse
Re-partitioning with the PIT file along with the ROM did not help :/
suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?
snubbel said:
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?
Click to expand...
Click to collapse
As long as you have the right drivers installed, no. That's my setup.
I had a similar issue. It occured only when I turned display off and on, both in android and in battery charging mode while powered off. I just went back to the store and got it replaced. xD
Anyway the flickering began to show up after flashing 3.2 back from a 4.0 rom... So I think there was something wrong with the bootloader.. Didnt find any tar file containing the original bootloader.. Perhaps someone here can make it for you
hey,
i got same problem after i tried to install cm9. now i cant install nothing (i formated cash, data, system and preload) no data factory reset working. i have nonstop bootloops and format cache and dalvik not working but cwm ist starting but not working really. but can start download mode too ... so i think its not a super-brick for my gt 7300 from switzerland.
so, i will try to download from samMobile the original firmware and to flash with odin. anybody knows a tutorial with odin for gt 7300? cant find nothing for pit, csc, tar ...
please help me
thx sophie from switzerland
suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
I have to say, I was about to send the tablet to samsung, it was dead, no rom, no boot, no partition, no USB connection to store, what save me was the Odin up load that you recommended me, the tablet was really crashed.
I Think that is a sollution for actually almost any problem on the tablet (a complete format, sure, but still a good solution for ROM problems).
anyway, Many Thanks!!!!!!
Newbie try to help.
Have you try to install another CMW version using odin? Maybe it's caused by wrong CMW version. Try CMW v5.5.0.4 here http://forum.xda-developers.com/showthread.php?t=1312218
Hey,
i wanted to flash from an unsafe kernel(ZCLP5) to a safe one and got the recent CM10 kernel (Kernel_CM10.1_20130130_Nightly_CWM.zip),
i then went into recovery mode and flashed the zip from sdcard and yeh here i am.
After the samsung logo appears i get a black screen and the software buttons flash once, no way to go into recovery or download mode.
When checking out the logcat with adb and grepping for "error" and "fail" i can see that the device fails to call eglInitialize (EGL_BAD_ALLOC) that, i guess, is initializing the OpenGL ES graphics lib.
So i'm a developer myself but not into android, where do i go from here?
Best greetings and thanks for support in advance.
What Rom did you have before?
I guess CM kernel doesn't work with your Rom (if it's TW).
Did you press the three buttons long enough for getting into recovery or download mode?
Easiest way: If you really do not get into recovery you should download a Stock Rom and install it with PC Odin.
ThaiDai said:
What Rom did you have before?
I guess CM kernel doesn't work with your Rom (if it's TW).
Did you press the three buttons long enough for getting into recovery or download mode?
Easiest way: If you really do not get into recovery you should download a Stock Rom and install it with PC Odin.
Click to expand...
Click to collapse
Hey,
yes i'm sure i pressed them long enough.
I was on one of the first ics releases ported from a galaxy S2 i'm quite sure this one:
http://forum.xda-developers.com/showthread.php?t=1516515
I guess for pc odin i need to be in download mode that is also not accessible :/
Tanks, and greetings.
EDIT:
Oh man somehow i get into download mode now, i swear i tried several times.
So you recommend that i flash stock rom now?
Will heimdall also work instead of odin?
lj_1102 said:
Hey,
yes i'm sure i pressed them long enough.
I was on one of the first ics releases ported from a galaxy S2 i'm quite sure this one:
http://forum.xda-developers.com/showthread.php?t=1516515
I guess for pc odin i need to be in download mode that is also not accessible :/
Tanks, and greetings.
EDIT:
Oh man somehow i get into download mode now, i swear i tried several times.
So you recommend that i flash stock rom now?
Will heimdall also work instead of odin?
Click to expand...
Click to collapse
Yes, heimdall will work I think.Flash a stock GB ROM.
So one of these will do it?
http://forum.xda-developers.com/showthread.php?t=1424997
lj_1102 said:
So one of these will do it?
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
yeah lookout for your country rom
Sent from my GT-N7000 using Tapatalk 2
Thanks for your support guys, after flashing stock rom, the stock launcher was broken but i was able to get to the settings via the status bar and by that enable usb debugging.
Then i pushed and installed clockwork recovery and after that flashed the current cyanogen mod.
:good:
Logo screen and no recovery mode
i installed german stock rom and then my phone wasnt opening properly then i closed phone and went into recovery mode did a wipe reset in CWM mode so damn me stupid i did something i shouldnt now i stuck in logo and cant get in to recovery mode
Desparoux said:
i installed german stock rom and then my phone wasnt opening properly then i closed phone and went into recovery mode did a wipe reset in CWM mode so damn me stupid i did something i shouldnt now i stuck in logo and cant get in to recovery mode
Click to expand...
Click to collapse
don't say that you have the stock kernel..! you might have hard bricked your note please consider the pit file method to recover it http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my GT-N7000 using Tapatalk 2
abhinav quietly brilliant said:
don't say that you have the stock kernel..! you might have hard bricked your note please consider the pit file method to recover it http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
yes was stock kernel what ever is that kernel i dont even know its name now the problem is people keep saying install kernel these that but i cant open that damn recovery mode in phone or just stuck in logo menu so sad me my lovely phone diedddddddddddddd
Desparoux said:
yes was stock kernel what ever is that kernel i dont even know its name now the problem is people keep saying install kernel these that but i cant open that damn recovery mode in phone or just stuck in logo menu so sad me my lovely phone diedddddddddddddd
Click to expand...
Click to collapse
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
i dont know how to use that pit my phone cant get into recovery mode if anybody knows it please help me to get out from this or show me a thread that some other people fixed this problem
warfareonly said:
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
Click to expand...
Click to collapse
hello can you be my guide how do i flash stock GB at this point im tottaly mess up with phone right now nobody help here i might lose some thread basically show me and i ll read i m scare to make my phone brick
---------- Post added at 03:52 PM ---------- Previous post was at 03:39 PM ----------
warfareonly said:
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
Click to expand...
Click to collapse
yes i can go on recovery mode and download mode now can u be my guide what to do
Desparoux said:
hello can you be my guide how do i flash stock GB at this point im tottaly mess up with phone right now nobody help here i might lose some thread basically show me and i ll read i m scare to make my phone brick
---------- Post added at 03:52 PM ---------- Previous post was at 03:39 PM ----------
yes i can go on recovery mode and download mode now can u be my guide what to do
Click to expand...
Click to collapse
download the rom from here http://forum.xda-developers.com/showthread.php?t=1424997
then you need to put the phone in download mode and connect to PC.. open odin and it should show that the phone is connected by showing a Yellow Box with COM:X
once this is done, place the rom (tar.md5 file) in the PDA tab (if only 1 rom file) and appropriate places if 3 rom files.
the press start.. the phone will start downloading. let it finish and the phone will reboot.. once done.. boot into recovery and choose factory reset. (GB rom is safe to reset using stock recovery)
nokiamodeln91 said:
download the rom from here http://forum.xda-developers.com/showthread.php?t=1424997
then you need to put the phone in download mode and connect to PC.. open odin and it should show that the phone is connected by showing a Yellow Box with COM:X
once this is done, place the rom (tar.md5 file) in the PDA tab (if only 1 rom file) and appropriate places if 3 rom files.
the press start.. the phone will start downloading. let it finish and the phone will reboot.. once done.. boot into recovery and choose factory reset. (GB rom is safe to reset using stock recovery)
Click to expand...
Click to collapse
THE PROBLEM İS NOW NAND writing start!! stuck what to do now please step by step im sooo noob and try to fix something i get moreee problemmm
Go to the above thread and download the pit file from there. Then in odin select the pit file under pit tab. This will auto tick the repartition option. Then select the rom in pda again. Reboot the phone into download mode and try again.
Freezing on nandwrite start is not a good sign.
nokiamodeln91 said:
Go to the above thread and download the pit file from there. Then in odin select the pit file under pit tab. This will auto tick the repartition option. Then select the rom in pda again. Reboot the phone into download mode and try again.
Freezing on nandwrite start is not a good sign.
Click to expand...
Click to collapse
hey doc all problem is fixed now new problem i did all and then flashed ics rom both way from kies or odin after i install ics its becomes freezing i really wonder why to buy a new sd card no problem for me i ll buy a 32 but why phone freezing* is there any thread to fix that or what is solution or no solution just replace the mboard
What did you do? Repartition?
If that.. Then use a small rom.. Like slimbean or cm roms. You could also try slimwizz. Big roms may not work properly.
nokiamodeln91 said:
What did you do? Repartition?
If that.. Then use a small rom.. Like slimbean or cm roms. You could also try slimwizz. Big roms may not work properly.
Click to expand...
Click to collapse
because they said so its only way to fix or if i did untick repartition will it still flash i wasnt sure there is no fix for that i dont like custom roms i think stock roms not bad about speed especailly 4.0.4 what if 4.1.2 come up ?
In this case, you could try with the J leaks which are small like slimwizz. Stock ICS roms are huge so may cause trouble. But you could try some stock based custom roms out there.
I tried rooting with the chainfire auto root thing and after the red android screen i got the green one again and its stuck,i tried taking out the battery a few times but its still not working.
Any help would be amazing.
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
JJEgan said:
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
Click to expand...
Click to collapse
I did and didnt find anything helpfull for my situation.
Also tried to root again but again its stuck on downloading... do not turn off target screen.
Boot to download mode and it says as it should Downloading do not turn off .
You are now supposed to flash the firmware via odin .
You should flash your stock firmware to get the phone working .
Then read the basic faqs and guides before you flash anything as its pointless flashing without reading the basics .
Or take it to a service centre .
jje
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
grpl said:
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
grpl said:
thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
read the basics ignorance is no excuse .
ashraf sharif said:
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
Click to expand...
Click to collapse
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
grpl said:
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
Click to expand...
Click to collapse
Is there a way to know my version/pda since i have no idea what stock rom to download
Device model no. in recovery mode
Hi,
Sorry to ask a random question. I Have my device model no. as S3 I9305 when I go to download mode and in my phone settings I can see my device model as S3 I9305T. I have recently installed Australian official firmware(XSA version without any career bloatware) in my phone, which is the S3 I9305T. I found it weird to have two different model nos. in 2 different places. When I first bought this phone it was the Telstra version, which is S3 I9305T. After that I changed many firmwares and installed S3 I9305 version from optus and other country's S3 I9305 version as well. Could you please tell me why is that?? Is this because I once installed I9305 firmware once? If that's the reason, today I flashed I9305T official firmware again with Odin. Is there any way to reset the download mode as well?? Please reply. Thanks.
grpl said:
Is there a way to know my version/pda since i have no idea what stock rom to download
Click to expand...
Click to collapse
Not unless you know what it is or saved the original .
You can just pick a stock rom for your area/ network .
If you bothered to read the basics their would be no need for all this ratting about .
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
dogmatism said:
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
Click to expand...
Click to collapse
So you run odin in windows.
Boot your phone to download mode
Connect device and wait for confirmation of connection in odin.
And then you click pda and choose a stock firmware.
And click start.
@tissot Odin gives fail error as I stated before. Am going to try 3 part odin package ive downloaded,.