Related
I've been searching, and reading, and my eyes hurt. I normally don't like to post threads, but I'm left with no choice. If this topic has been covered, then I guess my searchin' skillz are stating to lack. Here is my delimna:
Rooted, Lagfix, enabled Side-loading, recently installed ClockworkMod, stock firmware. I ran a backup using ROM Manager/ClockworkMod. I was attempting to install the Mobile AP fix for WiFi Hotspotting from designgears. I downloaded the new kernel per instructions (Mobile AP ony). I first tried installing it using ROM Manager's boot option into Clockwork without renaming MobileAP.zip. Still received black screen when I open the Mobile AP settings that the new kernel was trying to fix. So I thought that the flash didn't work, so this time I renamed the kernel file to update.zip and did the standard method of flash using stock recovery mode.
Now the phone boots to the Galaxy S screen, then just a black screen. The bottom row buttons seem to be active, but nothing happens. Holding power....nothing. I have to pull the battery; however, I can boot into stock recovery.
Now here's the delimna. I can boot into recovery, but the update.zip file is NOT the one for ClockworkMod, its the modified kernel. Is there a way that I can browse the files on the phone so I can change the update.zip file? I want to put Clockwork's in place so I can restore using my backup made yesterday....It's not a huge order if I have to flashback to stock and lose everything as I usually do that everynow and again anyways (usually I'm prepared). I won't lose anything important that isn't already backed up except maybe some pictures....
BUT, I can't help but try. It's just me I like to break stuff and fix 'em. I want to try to run that backup I made. I have Odin, and I tried flashing the kernel back to stock (i had one hell of a time finding information on how to use it). As a matter of fact, I found instructions on HOW to use it, but I gave up trying to find useful information on how the program runs (like a user guide, what else can it do, that sort of thing....). I spent hours reading thread after thread........information overload I guess.
I figured someone might point me in the right direction. How can I browse/edit the contents of the phone while in Recovery or Download mode?
You could try letting the phone boot up, yes I know it's only a black screen, then plug in the usb to your PC and see if ADB works.
If so then just adb shell into it and work with command line.
I'm not sure if ADB would work in stock recovery mode but that's worth a shot too.
Excellent idea, but no luck. I can get the computer to recognize the phone in recovery mode, but ADB shows the device offline, and Windows Explorer shows 2 drives with the whole "insert disk into drive ..." message. Can't boot phone to enable "development mode", that might have something to do with it......unless I'm missing something?
swedishcancerboi said:
Excellent idea, but no luck. I can get the computer to recognize the phone in recovery mode, but ADB shows the device offline, and Windows Explorer shows 2 drives with the whole "insert disk into drive ..." message. Can't boot phone to enable "development mode", that might have something to do with it......unless I'm missing something?
Click to expand...
Click to collapse
Wasn't sure if that would work or not.
So, if you turn it on and just let it sit as long as a normal boot, then try adb does anything work?
I actually let it sit for ~15 minutes. computer doesn't even register the usb being plugged in. I'm going to give it another go or two, but in about an hour I'm going to have to call it quits and just flash it with Odin. Don't want to give up yet, but I am driving out of town later this afternoon and must have my phone for the trip. Maybe I'll break it again tomorrow and play with it over the weekend!
Let me know if you have any other ideas. I'll let you know when I give up.
While on that subject (watch someone tell me to move my post after this.....), maybe I'll experiment with a new ROM. Any recommendations? (without OC, device is fast enough). I haven't read much on the different flavors available at the moment (I think I read something about a 2.2 from I9000 or something?).
swedishcancerboi said:
While on that subject (watch someone tell me to move my post after this.....), maybe I'll experiment with a new ROM. Any recommendations? (without OC, device is fast enough). I haven't read much on the different flavors available at the moment (I think I read something about a 2.2 from I9000 or something?).
Click to expand...
Click to collapse
Hybrid from eugene is pretty fast especially if you add the voodoo kernel to it. Thats what I heard tho. Because when i tried it out it was pretty quick with out a lagfix and without autokiller. Only used it for 20 min tho as i couldn't get Titanium backup to work. I think the titanium problem is a hit or a miss.
well, I guess I'm going to have to load stock and wipe everything...oh well. Let's see how this goes. Then I'll start playing with ROMs this weekend. Thanks anyway!
swedishcancerboi said:
well, I guess I'm going to have to load stock and wipe everything...oh well. Let's see how this goes. Then I'll start playing with ROMs this weekend. Thanks anyway!
Click to expand...
Click to collapse
Well, if your going to do that take an extra 2 minutes and load Eugenes Hybrid R3 while your at it. It's extremely easy to do and in my opinion the fastest thing we can put on these phones right now.
Vibrant ROM? is that safe? I mean, I know they are all Galaxy S, but is the hardware really that identical?
I don't think eugenes captivate hybrid is actually a vibrant rom. I think he just borrowed some of the better parts.
Sent from my SAMSUNG-SGH-I897 using XDA App
Got it! I used the one click stock down loader to get the phone to boot. I then noticed that many of my files were still there, music, zips.....so I thought....maybe my backup is still there.
Instead of using my original root, I decided to try Unleash the Beast.applied it so I could load Rom Manager.i opened Rom manager and it showed my backup!
I tried restoring then without success (no update.zip) and had to flash clockwork (even though it showed it already loaded, guess it needed to be refreshed, makes sense since it is a fresh firmware), selected my restore and it ran like a charm.
I am just surprised. I thought the act of flashing the Rom would wipe everything. Apparently not if you never do the "master clear."
Thankfully I had just installed Rom Manager the day before and had a fresh backup. Looks liked I'm gonna have to start shelling out more beer money to the devs!
Now I can prepare to break it again and again. Let the fun begin!
Sent from my SAMSUNG-SGH-I897 using XDA App
Nice. Yeah, stuff you have stored on your "internal SD" is safe between flashes. Of course apps, contacts, etc get wiped, but that's an easy fix.
"the more you know," eh? Ha!
Sent from my SAMSUNG-SGH-I897 using XDA App
I am obviously a NOOB. I am reading previous posts, but this is way more complicated than I expected.
I just want to get any factory firmware on my Captivate so that I can sell it. Right now I can't enter Download mode or Recovery mode via button combinations. I have tried for hours now.
Are there any simple directions that actually give links to what I need to download. ie...What Odin Files, etc.
Please help!
Here's the ODIN 1-click
http://forum.xda-developers.com/showthread.php?t=731989
And please post in the RIGHT section this is for development only.
Thanks
jarken20 said:
I am obviously a NOOB. I am reading previous posts, but this is way more complicated than I expected.
I just want to get any factory firmware on my Captivate so that I can sell it. Right now I can't enter Download mode or Recovery mode via button combinations. I have tried for hours now.
Are there any simple directions that actually give links to what I need to download. ie...What Odin Files, etc.
Please help!
Click to expand...
Click to collapse
And if your Captivate boots, you don't need button combinations to enter download mode. You need to download the SDK, put the Captivate in a USB debug mode, and then do "adb reboot download" to get there.
NOOB.
adb cmd???
jarken20 said:
I am obviously a NOOB. I am reading previous posts, but this is way more complicated than I expected.
I just want to get any factory firmware on my Captivate so that I can sell it. Right now I can't enter Download mode or Recovery mode via button combinations. I have tried for hours now.
Are there any simple directions that actually give links to what I need to download. ie...What Odin Files, etc.
Please help!
Click to expand...
Click to collapse
Why don't you just do a factory reset and delete your files from the phone ?
If your unable to just go in download mode and use the Odin one-click then you clearly need to spend more time reading. This is also a big red flag that you could turn your phone (effortlessly) into a brick.
Your choices are:
A) Read up, learn and invest time in it (not just 30min and a simple how-to then jump the guns with it)
B) Just delete your stuff, do a factory reset and sell it like it is.
A more tech savvy user will mod it to its liking. Why do the job for them if your not confortable doing it in the first place? It's not like your going to use it again, your selling it.
Yup I agree - if you already have a Stock phone - don't screw with it. Just do the factory reset which will wipe the phone back to stock anyways - and if you want to go that extra step you could format the internal SDCard from within the phone menu.
If it aint broke - don't play with it! (Well my real motto is If it ain't broke tweak it! but.. for you it doesn't apply)
I don't necessarily WANT to sell it. I want to give it a fair chance. I am used to an iPhone but I wanted to see what all the talk about the androids is about. I heard that this is all SO simple. Maybe so for some. I am just spoiled by the user friendliness of apple i guess.
Anyway, i haven't given up completely. I am gonna try all this again. I just don't have Hours upon Hours to define all the stuff that I'm reading. I am just surprised how difficult it is to make this thing anywhere near the same level as an iPhone. I'm sure it's easy for most. Maybe I'll figure it out....
Jumping in the conversation since we are on the subject. I rooted with z4root and flashed with rom manager. If I want to go back to stock will odin 1click work?
Sent from my SAMSUNG-SGH-I897 using XDA App
Tchem said:
Jumping in the conversation since we are on the subject. I rooted with z4root and flashed with rom manager. If I want to go back to stock will odin 1click work?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yes
(Yes is not a 10 char word)
jarken20 said:
I don't necessarily WANT to sell it. I want to give it a fair chance. I am used to an iPhone but I wanted to see what all the talk about the androids is about. I heard that this is all SO simple. Maybe so for some. I am just spoiled by the user friendliness of apple i guess.
Anyway, i haven't given up completely. I am gonna try all this again. I just don't have Hours upon Hours to define all the stuff that I'm reading. I am just surprised how difficult it is to make this thing anywhere near the same level as an iPhone. I'm sure it's easy for most. Maybe I'll figure it out....
Click to expand...
Click to collapse
It's not that hard but yes your spoiled . It's not like going to a website and bingo it's done like the jailbraiking on iphone. You actually do the commands manually and learn something in the process.
You also need the corresponding tools to do the job (Google SDK for ADB, Odin for flashing, etc..). You don't build a house only by looking at the blue prints you have to put some work into it
Check out my ODIN video it should walk you through this very easily.
http://forum.xda-developers.com/showthread.php?t=877652
Few days ago I rooted and put Serendipity 2.0 on my Build 1010 with no problems.
I want to try Cognition 3.01.
So I followed the SAME method used in the MobileTechVideos and I cannot figure out how to get it into download mode
I have tried the 3 button method several times and it just takes me to the battery charging icon.
------
Would I be able to just pull up Odin3 (I897UCJF6-final-OCD-REV0) .exe as administrator, plug in USB, turn on phone, and go to DL mode through the phone via that way? Would it recognize it on my computer so I can just go back to stock and do the entire process over again for a ROM?
Or is this easier: http://forum.xda-developers.com/showthread.php?t=818439
Would going to download manager through my phone while having Odin3 pulled up on the computer and my USB of course plugged in, work???
Please, someone, anyone!!! Wanting to try a new ROM so bad!!!
I would flash back to stock and start fresh
Have you used odin before?
I can get you into download mode and going with odin if your phone is working and recognized by your computer but with your build you don't want to use the odin you linked I am pretty sure.
crupp said:
I would flash back to stock and start fresh
Click to expand...
Click to collapse
That's what I'm trying to do!!! I just need to get into download mode first. My phone is not bricked or anything; it's working great. I just need to get into download mode so I go back to stock and put a new ROM on!!!
I think it's because of my build, 1010.
Can anyone confirm C3POs (Odin3) method works?
xThe Enforcer said:
Few days ago I rooted and put Serendipity 2.0 on my Build 1010 with no problems.
<snip>
Would I be able to just pull up Odin3 (I897UCJF6-final-OCD-REV0) .exe as administrator, plug in USB, turn on phone, and go to DL mode through the phone via that way? Would it recognize it on my computer so I can just go back to stock and do the entire process over again for a ROM?
Click to expand...
Click to collapse
You would probably end up with a brick.
See: http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
And, BTW, there is no need to flash stock before flashing Cognition, but it's still good to find a reliable way in case you ever have a real need to do so. Also, I'm pretty sure Cognition still includes and sbl.bin that will fix your button combos (that's not normally a good thing, but in your case it is).
xThe Enforcer said:
That's what I'm trying to do!!! I just need to get into download mode first. My phone is not bricked or anything; it's working great. I just need to get into download mode so I go back to stock and put a new ROM on!!!
I think it's because of my build, 1010.
Can anyone confirm C3POs (Odin3) method works?
Click to expand...
Click to collapse
I also have 010 and have flashed half a dozen rooms and used 3 button for all of them including Cog 3
opcow said:
You would probably end up with a brick.
See: http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
And, BTW, there is no need to flash stock before flashing Cognition, but it's still good to find a reliable way in case you ever have a real need to do so. Also, I'm pretty sure Cognition still includes and sbl.bin that will fix your button combos (that's not normally a good thing, but in your case it is).
Click to expand...
Click to collapse
Thanks for the link.
So bottom line; just use a different Odin3. Just like I originally posted:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Same concept.
crupp said:
I also have 010 and have flashed half a dozen rooms and used 3 button for all of them including Cog 3
Click to expand...
Click to collapse
Every phone is different. I've read of someone with 1008 not having 3 button.
opcow said:
You would probably end up with a brick.
See: http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
And, BTW, there is no need to flash stock before flashing Cognition, but it's still good to find a reliable way in case you ever have a real need to do so. Also, I'm pretty sure Cognition still includes and sbl.bin that will fix your button combos (that's not normally a good thing, but in your case it is).
Click to expand...
Click to collapse
And also, I disagree. Every ALWAYS says to flash to stock no matter what...
xThe Enforcer said:
And also, I disagree. Every ALWAYS says to flash to stock no matter what...
Click to expand...
Click to collapse
Not everyone. It's apparently mainly confined to the Captivate forums and not universally recommended even here (Darky's instructions say nothing about it, for example). There is no benefit to doing so, believe it or not. Of course I don't care how anyone does it. It's up to you. If you tell people it's safer, however, you're misinforming people based on something that got started months ago and just became the status quo.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
I believe this is what im looking for. I couldn't find the pit nor tar files any where. Im a vibrant owner so not to familiar with the files. Thanks. Will let you know.
Sent from my SGH-T959 using XDA App
Well bottom line, I think the easiest method for me to get into download mode every time I want to root/flash is by using the 99 cent jig. Thanks everyone for there info.
So I got into download mode by installing a 3buttonfix.zip via CWM.
I used Odin3 exactly like your supposed to. Went to stock, master cleared. Everything passed and completed.
My phone is now back to stock but still showing all files on my SD card. I even tried a factory reset and it still shows them.
Any ideas?
Blah, still no one?
*2767*3855#
This is the code you can enter in the dialer to wipe the phone internal memory. Does not ask for confirmation so make sure you have already done a backup of what you want.
newter55 said:
*2767*3855#
This is the code you can enter in the dialer to wipe the phone internal memory. Does not ask for confirmation so make sure you have already done a backup of what you want.
Click to expand...
Click to collapse
Outstanding. It worked and did actually delete everything on my SD card. It's odd how Master Clear and factory reset through the phone did not but this way did. Build 1010 is bipolar.
Appreciate all the help everyone!
(I gave you a 'thanks' Newter)
So I did just brick a 1008 phone and have a new one coming, so what should I be aware of with these newer versions of phones before I flash?
I did learn that one-click odin and the 3-button fix are big no-no's. BIG. It's a shame too, because the GPS on this fixed model was as good as my girlfiend's tomtom. So anyway, can someone point me in the right direction?
Maybe get an Inspire 4G? Seriously though, the button combos are still the biggest pita to me I have a 1010 build and the one click odin will soft brick it in a heartbeat. full odin seems to work best for me.
i was surprised, it wasn't the one click that killed it, it was the 3-button fix. I had successfully gone back to JF6 and master cleared (even though it came with JH7 stock) without issue. Just that last thing killed me when I couldn't get into download and I was reckless. Oh well. I won't be screwing that up again!
Aron1980 said:
i was surprised, it wasn't the one click that killed it, it was the 3-button fix. I had successfully gone back to JF6 and master cleared (even though it came with JH7 stock) without issue. Just that last thing killed me when I couldn't get into download and I was reckless. Oh well. I won't be screwing that up again!
Click to expand...
Click to collapse
Hmph. That's just weird. I have a1008, and while I did soft-brick it once using Odin 1-click, using the 3-button fix wasn't a deal. I generally don't use 3-button now, though; just reboot into recovery from the menu screen when the phone is on, once I've flashed back, master-cleared, etc. Guess I'll be a bit leery about using 3-button in the future, though.
Well it was a reconditioned phone from AT&T. I think it had all the new software and updated hardware. So that may have been the reasoning. I'll be using ADB to get some stuff done for sure in the future
Here's a copy/paste of a reply I made on another forum. ODIN-1-CLICK bricked this guy's phone.
"
I think your original problem (and mine; same issue) was due to using ODIN-1-CLICK on a batch 1010 or 1012 phone. The trick is to ONLY use ODIN3 (NOT 1-CLICK) with the 1010/1012 phones. So far, I've flashed my 1012 phone this way at least 6 times and everything has worked fine.
[PROGRAM] AIO Captivate Toolbox 3.0 NOW LIVE *Smaller, Faster, + More Automation* - xda-developers
The above is a GREAT program/toolbox for flashing phones. It includes both ODINs and will allow you to flash, root, flash customs, all in one place.
The other thing that I've become semi familiar with is "ADB". If you're not familiar with it do some research on it. You can get ADB with the SDK Tools for Android - Basically what I use it for is to VERIFY communication between the phone and the computer, prior to using ODIN3. This will help to ensure that things are getting started off correctly.
The last thing I *****HIGHLY***** recommend is spending the $10 on a jig. I did a flash to stock today and it had some partition problems and I had to use the jig to get back to Download Mode. As far as I'm concerned - If you flash at all, you need one - for $10, buy one now and have it on hand for later.
Anyway, glad to see you got another one - Hopefully your first experience will not discourage you from flashing ROMs. I was hesitant at first for fear that my phone would go 'dead' again, but using the above techniques has really proved itself as reliable to me."
Most totally disagree with me, but this is the Odin I've used on my 1012 build with ZERO problems.....
http://forum.xda-developers.com/showthread.php?t=731989
Keep in mind, though, that I've only used it once when I went from Cog back to stock so I could flash Serendipity.
do you have 3 button working on it after using odin 1 click?i have a 1012 build used odin 1 click lost my 3 button into recovery and cant use it to get into download mode had to use odin 3 to get it back.
Maybe I'm missing something here but I don't even know if my 1012 build Cappy has the 3 button stuff on it or not.
If I want to go to recovery, I use the extended power options, OR adb, or CWM for that matter.
Download mode? ODIN will usually take me there automatically if plugged in to USB - or my jig - or adb again, or the ext power options.
I don't need/care about the 3 button crap - should I?
Dante04SRT said:
Here's a copy/paste of a reply I made on another forum. ODIN-1-CLICK bricked this guy's phone.
"
I think your original problem (and mine; same issue) was due to using ODIN-1-CLICK on a batch 1010 or 1012 phone. The trick is to ONLY use ODIN3 (NOT 1-CLICK) with the 1010/1012 phones. So far, I've flashed my 1012 phone this way at least 6 times and everything has worked fine.
[PROGRAM] AIO Captivate Toolbox 3.0 NOW LIVE *Smaller, Faster, + More Automation* - xda-developers
The above is a GREAT program/toolbox for flashing phones. It includes both ODINs and will allow you to flash, root, flash customs, all in one place.
The other thing that I've become semi familiar with is "ADB". If you're not familiar with it do some research on it. You can get ADB with the SDK Tools for Android - Basically what I use it for is to VERIFY communication between the phone and the computer, prior to using ODIN3. This will help to ensure that things are getting started off correctly.
The last thing I *****HIGHLY***** recommend is spending the $10 on a jig. I did a flash to stock today and it had some partition problems and I had to use the jig to get back to Download Mode. As far as I'm concerned - If you flash at all, you need one - for $10, buy one now and have it on hand for later.
Anyway, glad to see you got another one - Hopefully your first experience will not discourage you from flashing ROMs. I was hesitant at first for fear that my phone would go 'dead' again, but using the above techniques has really proved itself as reliable to me."
Click to expand...
Click to collapse
I certainly won't be deterred (sp?) from flashing again. Just going to do a little more research in the next two days, so I can flash the new one when it arrives. I am a little familiar with ADB and the standalone ODIN. I think I will be spending more time using them. I actually bricked using the AIO toolbox, so I think I will just stick to doing it myself. Not that it was that programs fault, but I believe it made me a little less cautious because of the ease of using it. But still a fantastic thing for many users.
Aron1980 said:
I actually bricked using the AIO toolbox, so I think I will just stick to doing it myself. Not that it was that programs fault, but I believe it made me a little less cautious because of the ease of using it. But still a fantastic thing for many users.
Click to expand...
Click to collapse
The toolbox just incorporates the individual programs and some of the ADB scripts all into one package - The ODIN versions used in the AIO toolbox are the exact same as the standalone ones. Just FYI.
I don't use ODIN 1-CLICK anymore (except for Master Clear use). I have actually encountered a soft brick situation 2 times using the ODIN3 - For some reason, my phone sometimes hangs on the Partition section during a flash. When it does, it results in a soft brick with the computer-!-phone. The jig always gets it back into download mode, no problem.
sethjamto said:
Most totally disagree with me, but this is the Odin I've used on my 1012 build with ZERO problems.....
http://forum.xda-developers.com/showthread.php?t=731989
Keep in mind, though, that I've only used it once when I went from Cog back to stock so I could flash Serendipity.
Click to expand...
Click to collapse
It's not a matter of disagreeing... it's the fact that many phones in the 1010, 1012, AND 1008 series take ODIN 1-click badly. Sort of takes the opinion aspect out of the discussion.
if youre worried about getting into download mode get a usb jig gets any captivate into download mode
kevalin said:
It's not a matter of disagreeing... it's the fact that many phones in the 1010, 1012, AND 1008 series take ODIN 1-click badly. Sort of takes the opinion aspect out of the discussion.
Click to expand...
Click to collapse
Yikes. I hosed up my 1008 this past weekend doing something I had no business doing. Odin3 1-click was what worked. I guess I'm lucky. I have a VERY old G5 Mac, so Odin, Kies, and the SDK won't run on it (no Intel chip, so no windows or SDK on the PPC Macs).
I borrowed a friend's laptop and loaded up Odin3 1-click. At first it wouldn't work. I installed the drivers from Samsung, but Odin3 would only recognize the phone when it was on. It let me do a Master Clear. But if I put it in DL mode and connected it, Odin3 never saw it.
Strangely enough, I tried putting Kies Mini on it to see if I could get the stock Froyo. It installed a bunch of drivers, but I could never get it going. Every time I connected the phone, Kies Mini would quit itself. In a last-ditch effort, I tried Odin3 one more time and it recognized the phone. I can only guess it liked the drivers or whatever else it was that Kies Mini put on there.
BUT NOW, I don't have the 3-button recovery option. My Captivate came with JH7 and I always got the 3-button recovery. But now that I flashed back to JF6, it doesn't let me enter recovery mode. Grrrrr.
I'm going to try to do the OTA update to JH7 over wifi at work and see if that brings back my recovery mode...I hope it's still available. Booooo!
Long story short: 1008 Cappy + JF6 = I need to buy a new computer.
KreepyKen said:
Yikes. I hosed up my 1008 this past weekend doing something I had no business doing. Odin3 1-click was what worked. I guess I'm lucky. I have a VERY old G5 Mac, so Odin, Kies, and the SDK won't run on it (no Intel chip, so no windows or SDK on the PPC Macs).
I borrowed a friend's laptop and loaded up Odin3 1-click. At first it wouldn't work. I installed the drivers from Samsung, but Odin3 would only recognize the phone when it was on. It let me do a Master Clear. But if I put it in DL mode and connected it, Odin3 never saw it.
Strangely enough, I tried putting Kies Mini on it to see if I could get the stock Froyo. It installed a bunch of drivers, but I could never get it going. Every time I connected the phone, Kies Mini would quit itself. In a last-ditch effort, I tried Odin3 one more time and it recognized the phone. I can only guess it liked the drivers or whatever else it was that Kies Mini put on there.
BUT NOW, I don't have the 3-button recovery option. My Captivate came with JH7 and I always got the 3-button recovery. But now that I flashed back to JF6, it doesn't let me enter recovery mode. Grrrrr.
I'm going to try to do the OTA update to JH7 over wifi at work and see if that brings back my recovery mode...I hope it's still available. Booooo!
Long story short: 1008 Cappy + JF6 = I need to buy a new computer.
Click to expand...
Click to collapse
That's odd, because after I soft-bricked my phone using ODIN3 1-click, then finally got it to let me get back into download mode (I don't remember exactly what I did to manage that, though I know I hunted around the forums until I found some workable instructions), I used the non 1-click ODIN3 to get 3-button back.
I swear to God, these Captivates are pickier than cats with a food choice.
Hey guys, hope you be able to help. I have a cappy and is dead, no screen at all, no response on any button combination or even when i plug it in none at all..
I got the phone like this (for free a friend gave it to me) what are my options?
Would a jig help or JTAG is the only solution? (which i've been told is not 100% full proof that will revive the phone)
Any reply is much appreciated.
JiroPrinz8 said:
Hey guys, hope you be able to help. I have a cappy and is dead, no screen at all, no response on any button combination or even when i plug it in none at all..
I got the phone like this (for free a friend gave it to me) what are my options?
Would a jig help or JTAG is the only solution? (which i've been told is not 100% full proof that will revive the phone)
Any reply is much appreciated.
Click to expand...
Click to collapse
Yahh look for the unbrickable mod, contact AdamOutler or Connexion2005 i think!
b-eock said:
Yahh look for the unbrickable mod, contact AdamOutler or Connexion2005 i think!
Click to expand...
Click to collapse
Thanks! i have a jig on the way, will try that first (HOPEFULLY it will.do.the trick), if no luck then will try unbrickable mod.. last option is jtag.. well last option is to chuck it in my toilet really.. LOL..
Sent from my XT720 using XDA App
JiroPrinz8 said:
Thanks! i have a jig on the way, will try that first (HOPEFULLY it will.do.the trick), if no luck then will try unbrickable mod.. last option is jtag.. well last option is to chuck it in my toilet really.. LOL..
Sent from my XT720 using XDA App
Click to expand...
Click to collapse
Try the jig, see if Odin recognizes it.
Don't do Jtag, it's a pay each time thing while the unbrickable mod is forever, my phones on the way back from getting it done!
I have been looking through the threads, and havent seen what I am looking for. So hopefully i will not get flamed to bad. I tried to install mikeymikes GR12, I got through the first stage of downloading the gingerbread rom to the phone through odin, but then it went south. I lost root and was unable to get back to the download screen. I then tried to use the all in one tool to root the phone, and that put me to the recovery screen where i could not use the ok button, just the volume up and down buttons. I just managed to get the download screen to come back, but i cant get anything else to work. Any suggestions on what to do, where to go from here.
Thank you for your help
I would go back to stock first. I believe your problem lies in the bootloaders. There are two bootloaders in the beginning and if you don't have the gingerbread ones installed, you won't install gingerbread properly.
I would use DesignGears One Click Odin to go back to stock and load the Froyo drivers. http://forum.xda-developers.com/showthread.php?t=731989. Make sure you open up Odin first before plugging in your phone, then hit the Start button.
Once that is done, you can try again, but read about getting the GB bootloaders installed properly before you try to flash a GB ROM. Any of the GB ROM instructions should get you there. Just make sure you know all the steps before you try it again.
Good Luck!!
I don't see why you would be flamed for your question. That is what Q&A is for and you are in a bad spot. The biggest thing to remember is to be as specific as possible when you post a question. This includes what you were trying to do, what steps you took, what was the result, when did the problem occur (which step) and what you have tried to do, if anything to fix it.
One more thing. It is always possible that the USB cable is bad or that the USB port you are plugging into (on the computer) isn't working properly. You might also want to plug into a different USB port.
Sorry these posts are broken up, but as I'm coming up with ideas, I'm posting.
Here's something you should try:
(I wrote this for Team Phoenix, hence the sig.. But it works the same with every ROM. There's a link to a very nice tutorial I suggest you follow).
http://forum.xda-developers.com/showpost.php?p=13503747&postcount=2
Hope it helps
You guys are awesome, Odin one click worked, It's on eclair, but it works! Thank you again
donkeyboy said:
You guys are awesome, Odin one click worked, It's on eclair, but it works! Thank you again
Click to expand...
Click to collapse
Glad it worked!
Make sure you read and understand before going forward with flashing
Otherwise... well.. I'll still be in here ready to help lol
BWolf56 said:
Glad it worked!
Make sure you read and understand before going forward with flashing
Otherwise... well.. I'll still be in here ready to help lol
Click to expand...
Click to collapse
Me too. If we can ... Remember not all things can be recovered from so please read everything twice before ever touching your phone.
10-4. My next question is: where do I get froyo from. Kies sees my eclair version as unregistered, so it wont update. And my ota sees an update is needed, but when i tried, the area im in has crappy signal, so the update failed and now i have to wait 24 hours to do it.
Any suggestions?
Thanks again
are you planning on flashing a custom rom?
if so updating to official froyo is A HUGE WASTE OF TIME
EDIT:are you Canadian by chance? if so check this thread:http://forum.xda-developers.com/showthread.php?t=979133
I only plan to root the official froyo right now, that is what I had before I jacked it up. I am not Canadian.
donkeyboy said:
I only plan to root the official froyo right now, that is what I had before I jacked it up. I am not Canadian.
Click to expand...
Click to collapse
Going on official froyo will get you the signature failed error (which you need the 3e recovery fix if you ever want to flash a custom ROM).
So, basically, if you want more than 2.2 official release. We suggest you don't update. If you're perfectly fine staying on 2.2 Froyo, then there's no problem lol
As for Kies, you shouldn't have any problem using Kies mini. Other than that, there is a 2.2 flash around here. I'm sure you'll find it doing a little search
I had root on my official froyo for a couple of months without a problem. Right now i cant get my phone to go into download mode, it only goes to the battery screen. If i can get to download i can make some headway
donkeyboy said:
I had root on my official froyo for a couple of months without a problem. Right now i cant get my phone to go into download mode, it only goes to the battery screen. If i can get to download i can make some headway
Click to expand...
Click to collapse
If the battery pull way isn't working. You could always go read on abd. It send SU commands and you could get your phone in downlaod mode that way.
Is there an easy way to get adb without getting the sdk. I downloaded the sdk and it keeps saying i need java, when i download the java crap it says the same thing.
donkeyboy said:
Is there an easy way to get adb without getting the sdk. I downloaded the sdk and it keeps saying i need java, when i download the java crap it says the same thing.
Click to expand...
Click to collapse
Did you reboot your pc?
Yes i did, no change
i believe you need microsoft .net framework installed also...
easy adb setup link in my sig.
files and everything needed to get going.
you may want to build a jig yourself or buy one online just in case:
MOD EDIT: No links to commercial products please.