I recently rooted my Samsung Captivate using SuperOneClick 1.9.1. The only things I have done since rooting the device is allow sideloading (by editing settings.db with SQLite Editor), so I can install apps from Amazon Appstore and used Titanium Backup to delete bloatware.
I noticed that when I installed SwiftKey that I would click 'Enable Swiftkey' and then click on Swiftkey settings only to be told that I need to enable swiftkey in order to change the settings. I thought it was a problem with swiftkey.
However, I then noticed that the phone kept reverting to USB Debugging Mode and only after three attempts was I able to disable USB debugging and mount my drive. I finally figured out that it's a problem with changing settings; can anybody tell me how to fix this? Thanks.
Super one click 1.whatever has the option to enable side-loading ( 2nd tab! ) so you really waisted some time on that one!
if you are running a custom rom, they are made to keep debugging on, it doesnt stop you from doing anything.
to enable swift key:
menu button > settings > locale and text > check swiftkey to enable.
ive never used swiftkey but that is how all other keyboards go....
all else fails install a custom rom / pre-rooted, crap removed, extra options, side loading tethering ect...
More info
The problem isn't just SwiftKey or USB debugging. All settings on the phone are screwed up. I hold down the power button and bring up the options:
Data Network Mode: I restarted the phone and 3g was enabled. I clicked on the data network mode and disabled it. But now it's always off, yet it says it's activated (and I can't set it to deactivated)
Airplane Mode: I can't put the phone in airplane mode, nor can I do this from the settings menu
Sound: This works fine
On the Power Control Widget:
Brightness: I can change brightness, but the icon stays the same
Sync: This button works fine
GPS: This button is not responding
Bluetooth: n/a (the button lights up, but I don't have bluetooth)
Wifi: n/a (the button lights up, but I don't have wifi nearby)
The settings menu:
I know that Swiftkey and USB debugging are giving me problems
As for the custom ROM, I was having problems with the the signature error on 2.2 (http://forum.xda-developers.com/showthread.php?t=1051197)
I'm going to try out the advise from that thread and see if I can resolve this with a custom ROM. Normally I'd say this is "throwing out the baby with the bath water," but I'm excited about putting a custom ROM on my phone for performance reasons.
If there is another solution, I'd like to know about it because I want to be a little more adept before installing a ROM on my phone. Thanks.
I was going to install Serendipity 6.4. Do you have another MOD that you would recommend?
+1 for serendipity
I have a Nook Color with B&N sw v1.3 and ManualNooter 4.6.16.
I just open Market and get a "No matching content in Android Market"...
I reapply MN4.5.18, FlashPlayer_Fix, MN4.6.16 and Market fix procedure and Market still shows the same text...
Something rare: In Market app I tap "Apps" and shows some apps, I tap "Games" and shows some games, but I tap "My apps" and shows "No matching content in Android Market"
Another thing rare: I run AppBrain, tap "Manage And Sync" and shows the complete list of apps installed, including a list of update pending apps, but when i tap "Update (in Market)" get the same "No matching content in Android Market" from Market...
I think (I don't know why) Market app thinks is running in another device different to Nook Color and can't syncronize with the apps installed in the device
Anyone have a idea what's happening or how can I fix this???
clear market data... that should also clear cache.
Clear market data don't fix...
DizzyDen said:
clear market data... that should also clear cache.
Click to expand...
Click to collapse
Nope... I did the Market Fix procedure:
GabrialDestruir said:
[*]Market has limited visibility - This is a known tablet issue, not just a NOOKcolor one.
Start Nook Color Tools.
Select the "All Settings" button.
Unplug your NOOKcolor from computer. (If Plugged in.)
Choose "Manage Applications" from the list.
Select the "All" tab.
Scroll down to "Market" and select it.
Tap "Force stop".
Tap "Clear cache".
Tap the Back button if you have SoftKeys running, else swipe right to left on the status bar at the bottom of the screen (from the clock to the book icon).
Scroll up to "Google Services Framework" and select it.
Tap "Clear data".
Tap "OK".
Tap "Force stop".
Press the n button to return to your launcher.
Start Market.
At the "An error has occurred" message, tap "OK".
Hold your power button to turn off your NOOK Color from the menu.
Turn your NOOK Color back on and give it a moment to find your WiFi connection.
Start Market again, and the problem is resolved.
Click to expand...
Click to collapse
I did it tree times... no changes
fealuin said:
Nope... I did the Market Fix procedure:
I did it tree times... no changes
Click to expand...
Click to collapse
Either download LCD Density changer and reset from 161 to 160 and choose the option to save on boot. Also clear the market data and try again.
Or....
Use Titanium backup to uninstall the marker updater app, then go to manage applications/market and uninstall the update. Clear data. Try now or reboot first.
Dear Tasker-Masters,
My goal:
I want to limit the use of certain apps on my son's phone (running CM12.1) using tasker. Some apps (basically games) are time-limited, others shall not be accessible at all.
What I did (apart from deactivating the guest account):
I've defined a profile "No access" that activates when certain apps start (including play store and settings). This profile starts a task calling for a lock screen asking for a code. Locking settings is especially needed to deactivate the option to developer options and root access, access to other appstores, or the device admin section.
What my son did:
He found out, that the locked app appears in the app history. Clicking the locked app in the history immediatly brings up the lockscreen. However, there's a tiny time frame of maybe 0.1 seconds, where the locked app reacts to strokes on the display. This way, it's possible to scroll down the "setting" app until you get to the "security" and "device admin" section, and then to disable tasker from there. Now, profiles cannot read or react to whatever appears in the foreground of the display.
My question:
1. Can you think about a secure way to lock access to android settings? How would that be?
2. is it possible to deactivate the appearence of (only!) the android settings in the app history?
1. Create a profile -> Application -> Settings. This will trigger when someone goes into the settings app (yes even settings its an app).
In the task itself you can just "Go Home".
The task will trigger even if he goes to the settings from the recent app screen.
2. If your phone is rooted then just kill the settings app from running.
If not use AutoInput to press that "kill all" button (unfortunately).
Make sure also that tasker is a device administrator. You don't want your son to "accidentally" uninstall it.
You can't uninstall device admin apps without turning off that setting and he cant go into settings.
I hope these guidelines will help you.
I have an unrooted/unchanged/stock Huawei P10 running EMUI 5.1 and am trying to debug a website I'm making. Latest Chrome on the P10 and latest Chrome on my Retina MacBook Pro 15'' (late 2013) High Sierra 10.13
The route worked on all my previous devices. USB Debugging is checked on, I plug in the cable and say yes to the prompt "Allow Access to device data?". Next prompt "Allow USB Debugging" -> OK gives me the following error: "An App is obscuring a permission request. Settings can't verify your response"
Looking for solutions I read stuff about background apps which mess up things. All I know of / remember installing is "Mi Band Tools", and "Pie Controls".
I tried to shut down "Mi Band Tools" via Settings -> Apps -> Mi Band Tools -> "Stop" – But it seems not to be stopped for long? Since I don't know if this would solve the problem anways, I figured to come here first. It would be great if I wouldn't have to uninstall these apps.. always a pain to restore etc.
Thank you very much!
*gentle push*, because the problem still remains
katerlouis said:
*gentle push*, because the problem still remains
Click to expand...
Click to collapse
I had the same problem with my Huawei Honor View10.
I had to uncheck the "Permit drawing over other apps" for a (in my case) JINA Drawer. Maybe you have to uncheck an other one...
In EMUI 8 = Settings - Apps - Apps & notifications - Apps - Settings (bottom of screen) - Special access - Draw over other apps
Good luck!
fehrcomp said:
I had the same problem with my Huawei Honor View10.
I had to uncheck the "Permit drawing over other apps" for a (in my case) JINA Drawer. Maybe you have to uncheck an other one...
In EMUI 8 = Settings - Apps - Apps & notifications - Apps - Settings (bottom of screen) - Special access - Draw over other apps
Good luck!
Click to expand...
Click to collapse
Thank you for the tip! This got me on the right track <3
Holy Moly.. this setting is hidden as hell; on my P10 running EMUI 5.1 (german), the setting path was:
settings > apps > settings (corg button at the bottom left) > special access > draw over other apps > talkback
Thank youuu!
katerlouis said:
Thank you for the tip! This got me on the right track <3
Holy Moly.. this setting is hidden as hell; on my P10 running EMUI 5.1 (german), the setting path was:
settings > apps > settings (corg button at the bottom left) > special access > draw over other apps > talkback
Thank youuu!
Click to expand...
Click to collapse
Yes! On my device Mate 1o Pro, it was Talkback as well that ¨obscured a permission request¨.
If you have a custom rom with Smart Pixels and it is turned on, it will do this also. Turn it off, retry,
help please
im using honor 7x with latest oreo update and running on emui 8.0
none of the above method helped me get through that error
please help i can not verify my computers RSA key because an app is obscuring the permission request .
kamisan said:
If you have a custom rom with Smart Pixels and it is turned on, it will do this also. Turn it off, retry,
Click to expand...
Click to collapse
YEESSSS!!! Thank you for mentioning this, I never would've make that connection and that's exactly what it was for me! I guess those pics weren't all that smart after all ?
Panshu Mehra said:
im using honor 7x with latest oreo update and running on emui 8.0
none of the above method helped me get through that error
please help i can not verify my computers RSA key because an app is obscuring the permission request .
Click to expand...
Click to collapse
I have an Honor 8 pro and I'm facing the same issue. I've disabled all apps which draw on the screen and restarted my phone too.
kamisan said:
If you have a custom rom with Smart Pixels and it is turned on, it will do this also. Turn it off, retry,
Click to expand...
Click to collapse
Wow, good call. I was having this same issue. Thanks!
Fix #2 - if it works
i was messing with my Samsung Galaxy J7 Core J701F/DS and I was trying to figure out your problem also because i got the same problem as yours so the thing that worked for me is going to Settings (Nougat 7.0/1)> Apps> 3-dot menu/optionsl settings/other settings> Special Access> Apps that can be on top> Disable all apps like literally disable them all and try to debug your phone again...if it works, enable apps in that setting one by one and repeat debugging process. If it doesnt work, disable the last app you enabled, and if it works again...that is the app that is doing the dirty work...mine was not in the system apps it was one of my apps which is AZ Screen Recorder lol....(why the app that is being used everyday need to be disabled....)
kamisan said:
If you have a custom rom with Smart Pixels and it is turned on, it will do this also. Turn it off, retry,
Click to expand...
Click to collapse
Omg thank you so much for this. It was driving me bat**** crazy. I tried everything didnt even think this would cause it.
katerlouis said:
I have an unrooted/unchanged/stock Huawei P10 running EMUI 5.1 and am trying to debug a website I'm making. Latest Chrome on the P10 and latest Chrome on my Retina MacBook Pro 15'' (late 2013) High Sierra 10.13
The route worked on all my previous devices. USB Debugging is checked on, I plug in the cable and say yes to the prompt "Allow Access to device data?". Next prompt "Allow USB Debugging" -> OK gives me the following error: "An App is obscuring a permission request. Settings can't verify your response"
Looking for solutions I read stuff about background apps which mess up things. All I know of / remember installing is "Mi Band Tools", and "Pie Controls".
I tried to shut down "Mi Band Tools" via Settings -> Apps -> Mi Band Tools -> "Stop" – But it seems not to be stopped for long? Since I don't know if this would solve the problem anways, I figured to come here first. It would be great if I wouldn't have to uninstall these apps.. always a pain to restore etc.
Thank you very much!
Click to expand...
Click to collapse
1. Apps such as Blue light filter apps constantly appear on the top of your screen thus breaking some of the on screen functionalities. Try disabling display over other apps permission of such apps and you should be fine.
2. Also, sometimes it is because of your custom launcher, so try switching to your stock launcher if above solutions don't work.
3. If Accessibility for some apps are on then try disabling them first.
PS : Of all the 3 solutions try the possible ones.
Hope it helps.
kapil1100 said:
1. Apps such as Blue light filter apps constantly appear on the top of your screen thus breaking some of the on screen functionalities. Try disabling display over other apps permission of such apps and you should be fine.
2. Also, sometimes it is because of your custom launcher, so try switching to your stock launcher if above solutions don't work.
3. If Accessibility for some apps are on then try disabling them first.
PS : Of all the 3 solutions try the possible ones.
Hope it helps.
Click to expand...
Click to collapse
This put me on the right track.
I have an LG G6 running Android 8.0. My Keeper Security app needs permission to Draw over other apps and since around December 2018 it has started acting 'flaky'. The app would warn me that I need to turn on this permission, but when I clicked "OK" in the Keeper app to take me to the Android setting for the app, it was always turned on. I could turn it ON/OFF, along with the setting that needed this permission in the Keeper app (called Keeper Fill) and eventually get it to work again, but it would always break again very soon after.
As I am getting ready to go on a trip, I installed Google's Datally app. It, too, wants me to turn on Draw over other apps, but when I tap "next" to be taken to the Android settings page to enable Draw over other apps, nothing happens (I usually expect an app detects it has been enabled and gives "success" message).
So I started disabling the 3 possible suspects listed by kapil1100. I had LG's Comfort View and some Accessibility options enabled, so I turned them off and: no change.
I disabled all other apps that have permission to Draw over other apps via: Settings > Apps & notifications > Special access > Draw over other apps, and: no change.
I use Evie launcher, so I went back to the stock one: no change.
I got thinking about what else could be modifying/accessing the screen and realized that LG has custom Home touch buttons.
I went to: Settings > Display > Home touch buttons > Hide Home touch buttons and DISABLED Show lock/hide icon and then tried enabling Draw over other apps for Datally and IT WORKED!.
I was then able to turn Show lock/hide icon back ON and everything has been working as expected. I suspect that, because I had Show lock/hide icon turned on during an upgrade, something got messed up and my turning it OFF and back ON fixed the issue.
I hope this helps someone!
To take a screenshot on this phone, I must tap the square button on the bottom right. This gives me 2 options: Screenshot and Select. They are both always greyed out, and so clicking on either one does nothing. I don't even get an error message.
Interestingly, I have found a crappy work around. If I reboot the phone, the options are not greyed out, and they actually work, BUT for only like 5 to 10 minutes, then at some point, they are once again always greyed out. It doesn't matter what app or what I have on the screen, even just trying to take a screenshot of my Settings menu, for example, the two options are greyed out.
Any suggestions where to start to narrow this issue down? Obviously, something during startup is disabling it since it works for a few minutes.
Phone Details:
Android 11
Magisk 25.2 (25200) (33)
Zygisk - LSPosed v1.8.5 (6649)
Universal SafetyNet Fix v2.3.1 by kdrag0n
Systemless Hosts v1.0 by Magisk
Sounds like global power management may be causing it. Not sure what Pixel call it. A settings issue if so. You'll need to either disable it or set the app that's getting shutdown as an exclusion to this service.
Developer options> standby apps; if all bucket states are showing as active, power management isn't enabled. If you have apps showing various bucket states, it's running.
Perhaps a 3rd party app; try in safe mode to rule that out. Regardless track down the root cause otherwise even with a factory reset it's likely to reoccur.