[Q] Odin FAIL with kernel - Galaxy Tab Q&A, Help & Troubleshooting

Hi,
First, forgive my english, in France our teatcher are french too ^^
So, I tried flash kernel with Odin, and it get FAIL at end.
I tried overcome kernel and modaco (something like that!) and i get same error. Everytime I must reflash an official rom to reboot the tab, because I get the computer with phone link screen and I can't access to recovery (I don't know if you can understand what I try to say )
An idea ? I don't know why I can't flash the kernel...
Thanks you

babysugar said:
Hi,
First, forgive my english, in France our teatcher are french too ^^
So, I tried flash kernel with Odin, and it get FAIL at end.
I tried overcome kernel and modaco (something like that!) and i get same error. Everytime I must reflash an official rom to reboot the tab, because I get the computer with phone link screen and I can't access to recovery (I don't know if you can understand what I try to say )
An idea ? I don't know why I can't flash the kernel...
Thanks you
Click to expand...
Click to collapse
hm....if you tried to do that from Stock firmware, you can't because you have a protected bootloader.....it happened to me as well ....but there is a solution:
1. go in download mode....if you can. If is showing phone - ? - computer, no problem, just flash with PIT file! it works.
2. flash the stock firmware once again via Odin from SamFirmware
3. once you done, root you tab with SuperOneClick.
4. Apply the patch
5. Flash again the kernel . Overcome_Kernel_v1.0.tar (5.50 MB) don't flash the latest on; if you coming from stock , you need to flash this version, and after conversion to Ext4 you can update...
....BTW you have a very good tutorial here. just follow it. hope it helps!

Thanks !
I will try !

Woaw, worked as well !!
It was just the bootloader !
Thanks for your help !

nice to see you back !!!!

Related

How do i update to Darkys v10.2 extreme edition?

(sorry i ment how do i update to v10.2.2 final)
Ive installed it but it gets stuck on boot up
Maybe i need to install other firmwares before this?
Been 2 days and i dont know how to update :/
Thank you!
it's not that hard, first u need to download darky 10.2 for odin then put phone in download mode then open odin then connect usb to pc. Select pit512 and the zipped PDA to odin PDA and flash.
I believe Darky has his own forum, which should contain the necessary tutorials.
The above poster described flashing your phone with a program called Odin. I'm sure if you searched this forum for "odin tutorial" you'd find more than enough threads to help you.
Also, try to be more specific next time.
flash this first http://www.darkyrom.com/community/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
then put 10.2.2.zip on sdcard and flash it with CWM (install .zip from sd card option in recovery)
jamz_74 said:
(sorry i ment how do i update to v10.2.2 final)
Ive installed it but it gets stuck on boot up
Maybe i need to install other firmwares before this?
Been 2 days and i dont know how to update :/
Thank you!
Click to expand...
Click to collapse
First flash with 10.2RE
http://www.hdtechvideo.com/?p=5
Then flash 10.2.2
http://www.hdtechvideo.com/?p=48

[Q] Help!!! URGENT!!! Something has gone wrong in flashing process.

Hello,
I am a completely new person to all this flashing. I wanted to put ICS on my galaxy s. It is already on 2.3.3 and I just recently rooted it using superoneclick.
Odin was doing its thing, then it came up with 'FAIL'. Now my screen looks like this (see attachment) and will only let me go into download mode.
What can I do??
All help is greatly appreciated.
Hey
Dont panic..just read my UnBrick Guide (Below)..itll solve ur issue..else you can downgrade to a stock firmware and start all over again..
you also goes into charging? Try to flash a kernel by odin in pda unmarked pit or partition
Hey. That's not such a bad thing. Your phone has no software on it, that's why you can't start or go into recovery. Simply get a ROM that can be flashed via Odin and flash it. That'll solve everything.
U can find roms here:
http://forum.xda-developers.com/showthread.php?t=1102881
tzutzyalex said:
Hey. That's not such a bad thing. Your phone has no software on it, that's why you can't start or go into recovery. Simply get a ROM that can be flashed via Odin and flash it. That'll solve everything.
Click to expand...
Click to collapse
Thanks heaps,
Any chance that I could flash an ICS rom?
marcelle3 said:
Thanks heaps,
Any chance that I could flash an ICS rom?
Click to expand...
Click to collapse
Yes flash a GB stock rom with odin, cf root it, go into recovery and flash a custom rom of your choice
Could you please give a bit more detail on how to do this? Im sorry im just new to all this stuff.. Thanks heaps.
Help You
Please take a look here, you will find all the needed tools and soft
http://forum.xda-developers.com/showthread.php?t=948790&highlight=stock
No panic, read on the forum how to work with Odin. And you will be on track soon.

PLEASE HELP??? my samsung i9070 stuck on samsung logo

I am newer on samsung phone,,,, i was update my phone using JB frimware
now my phone hangs on samsung logo (i cant enter recovery mode,,, but download mode still oke)
try flashing many times with other JB stock roms but problem still same
i cant enter recovery mode,,, but download mode still oke
my custom binary domwload ; yes (115 count)
how to repair my phone????
i want to flash karnel but dont know exactly step by step?
i am tryng to downgrade to GB with tutorial on this forum but always says error (unable to pit partition)
THANKS for reply n your help....
l_m_husni said:
I am newer on samsung phone,,,, i was update my phone using JB frimware
now my phone hangs on samsung logo (i cant enter recovery mode,,, but download mode still oke)
try flashing many times with other JB stock roms but problem still same
i cant enter recovery mode,,, but download mode still oke
my custom binary domwload ; yes (115 count)
how to repair my phone????
i want to flash karnel but dont know exactly step by step?
i am tryng to downgrade to GB with tutorial on this forum but always says error (unable to pit partition)
THANKS for reply n your help....
Click to expand...
Click to collapse
Maybe the downloaded file is corrupted..Try flashing another baseband FW and check it.
For flashing kernels theres a SAFE AND FREE app
http://dl.xda-developers.com/attachdl/bca6a9b5a73472139b21ff4f2d7b4722/51a03873/1/9/0/2/9/3/1/Universal_Kernel_Flash_Tool_110.apk
Install this app and open it
Select the md5 or bin files from it and flash them and restart.
There you go...its done
I dont know about downgrading to GB..never tried and not gonna try it
MY JB is awesome:highfive:
narutosri said:
Maybe the downloaded file is corrupted..Try flashing another baseband FW and check it.
For flashing kernels theres a SAFE AND FREE app
http://dl.xda-developers.com/attachdl/bca6a9b5a73472139b21ff4f2d7b4722/51a03873/1/9/0/2/9/3/1/Universal_Kernel_Flash_Tool_110.apk
Install this app and open it
Select the md5 or bin files from it and flash them and restart.
There you go...its done
I dont know about downgrading to GB..never tried and not gonna try it
MY JB is awesome:highfive:
Click to expand...
Click to collapse
thanks for reply,,,
look my binary count (115) i was flashing with many different frimware
can you guide me step by step for repairing recovery mode????
THANKS
You can't enter recovery after flashing original fw via odin? Try taking out battery, put it back in and force recovery. Press it for a long time till it enter recovery. Then factory reset. I encountered this once on galaxy ace, endless bootloop and can't enter recovery but download is okay. Then I pressed the buttton until it somehow got into recovery. I don't know if this works but you can try though.
l_m_husni said:
thanks for reply,,,
look my binary count (115) i was flashing with many different frimware
can you guide me step by step for repairing recovery mode????
THANKS
Click to expand...
Click to collapse
We do not have any JB custom kernel that is flahsable with Odin. So I suppose you flashed GB custom kernel on JB, that is your problem. Flash whole STOCK JB FW again. After that use ONLY JB kernels. CoCore 6.x for example. Only one not abandoned from updates for now.
Do this again with JB, step by step: http://forum.xda-developers.com/showthread.php?t=2086965
And kernel: http://forum.xda-developers.com/showthread.php?t=2140597
Unzip it, put it on SD card, install Frapeti's universal kernel flasher. Install some ROOT explorer, this app needs it to work. Use it to install kernel.
Study content of this thread for future use: http://forum.xda-developers.com/showthread.php?t=2094318

[Q]Bootloop & No recovery Mode

Hello everyone ! I have a samsung galaxy s3 mini i8190
I flash CM , but i didn't like it so i tried to install with odin the original firmware.
Problem: Bootloop (logo Samsung Galaxy S3 Mini reboot infinite loop)
I can't enter in Recovery Mode, only i can enter in Download Mode
I use ODIN to try to install CWM , but still don't work..
And i have another problem. When I click start (in odin) it stops at SetupConnection, but if I disconnect & reconnect (usb) it starts flashing.
Please, help me.
Try to flash stock recovery instead of CWM.
tys0n said:
Try to flash stock recovery instead of CWM.
Click to expand...
Click to collapse
"I use ODIN to try to install CWM , but still don't work.."
I said this in the thread. If i'm wrong, please correct me.
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Vladdyak47 said:
"I use ODIN to try to install CWM , but still don't work.."
I said this in the thread. If i'm wrong, please correct me.
Click to expand...
Click to collapse
Yes you did, but I asked you to try with STOCK RECOVERY instead.
It's not always a part of the official firmware package.
stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
Can you help me with the link? Flash with PDA, right? (select PDA files, connect the device and click start)
Which one is good? http://forum.xda-developers.com/showthread.php?t=2187295
P.S. : I resolved the problem with connection
P.S.2: In Download Mode i have "CUSTOM BINARY DOWNLOAD: YES (3 counts) :|
P.S.3: When i try to flash a original firmware, after device restart it's an android charging something
EDIT: Now i have a new problem: FIRMWARE UPDRAGE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN
Vladdyak47 said:
Can you help me with the link? Flash with PDA, right? (select PDA files, connect the device and click start)
Which one is good? http://forum.xda-developers.com/showthread.php?t=2187295
P.S. : I resolved the problem with connection
P.S.2: In Download Mode i have "CUSTOM BINARY DOWNLOAD: YES (3 counts) :|
P.S.3: When i try to flash a original firmware, after device restart it's an android charging something
EDIT: Now i have a new problem: FIRMWARE UPDRAGE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN
Click to expand...
Click to collapse
Download service firmware and solve all your problems
Then just flash whatever rom you'd like.
Thanks a lot tys0n ! My Phone works now!
Mine has the same problem! I flashed kernels and params as well!
stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
Solved !!! Thank you very very much, for all of u.. Worked ... Finally i can enter recovery mode and turn on my s3 mini.. . thanks XDA n really sorry for my english
stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
What if my device cant be recognised by my pc. Ive tried every pc/laptop I own with different OS. So basically I have a bootloop stuck phone with no recovery mode available and it doesnt connect to the pc. Is there any way to fix that? Or is the phone completely bricked and I cant do anything about it.
PS: I have tried installing latest samsung drivers on my pc but it still cant recognise the phone.
Have had this phone for 6 years and it was ****ing amazing. I missed this little guy and want to fix him just as a "souvenir" since it was my first ever smartphone.

not stable

my problem is i only can get the phone stable in download mode othervise its restarts.
i flashed latest philz kernel whit odin and i got into recovery but it restarted.
the phone is stable in download mode.Any one can help?
regards wikings1
wikings1 said:
my problem is i only can get the phone stable in download mode othervise its restarts.
i flashed latest philz kernel whit odin and i got into recovery but it restarted.
the phone is stable in download mode.Any one can help?
regards wikings1
Click to expand...
Click to collapse
In combination with your already closed thread from before I do not really understand you.
What Rom did you have before? What did you do? What was the problem before?
But: if you can switch to download mode then you can install a stock Rom (see the link I gave you in the other thread) with PC Odin. Do this first and check if you succeed or if you get errors.
HI Thaidai i downloaded latest samsung original firmware and flashed it whit odin (N7000XXLT9_N7000HTSLT1_HTS) and its succed.
but still same problem. And dont be angry Thaidai.
Maybe its the battery?.
One more question triangel counter shows 1 is the warranty gone then?
regards wikings1
If you are really sure that your flashing with Odin was a success:
Try to switch to recovery now and make a factory reset.
You installed a kernel with Odin - resulting in a raised counter. You can remove this later without problems. But first you should get a booting device again.
yes iam sure it flashed oki but still same problem.cant boot to recovery. i Think firmaware was original no root from sammobile
shall i try Another firmware from the link you gave in Another tread?
wikings1 said:
yes iam sure it flashed oki but still same problem.cant boot to recovery. i Think firmaware was original no root from sammobile
shall i try Another firmware from the link you gave in Another tread?
Click to expand...
Click to collapse
In your posts from last year you used a Custom Rom.
So I think you do not really know about the state of your device and so also you don't know if the flashing with Odin was really successful.
So: yes, download another stock Rom, check the MD5 hash to be sure that the download was correct.
Install it with PC Odin AND make a snapshot of the ODIN window after flashing was completed and post it here.
i had custom rom but i tryed to flas original thats why changed rom
i will try whit rooted rom ilbe back
thanks for help thaidai the battery was broken. replaced it whit new one and Everything is ok
regards wikings1

Categories

Resources