[Q] Help!!! URGENT!!! Something has gone wrong in flashing process. - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello,
I am a completely new person to all this flashing. I wanted to put ICS on my galaxy s. It is already on 2.3.3 and I just recently rooted it using superoneclick.
Odin was doing its thing, then it came up with 'FAIL'. Now my screen looks like this (see attachment) and will only let me go into download mode.
What can I do??
All help is greatly appreciated.

Hey
Dont panic..just read my UnBrick Guide (Below)..itll solve ur issue..else you can downgrade to a stock firmware and start all over again..

you also goes into charging? Try to flash a kernel by odin in pda unmarked pit or partition

Hey. That's not such a bad thing. Your phone has no software on it, that's why you can't start or go into recovery. Simply get a ROM that can be flashed via Odin and flash it. That'll solve everything.

U can find roms here:
http://forum.xda-developers.com/showthread.php?t=1102881

tzutzyalex said:
Hey. That's not such a bad thing. Your phone has no software on it, that's why you can't start or go into recovery. Simply get a ROM that can be flashed via Odin and flash it. That'll solve everything.
Click to expand...
Click to collapse
Thanks heaps,
Any chance that I could flash an ICS rom?

marcelle3 said:
Thanks heaps,
Any chance that I could flash an ICS rom?
Click to expand...
Click to collapse
Yes flash a GB stock rom with odin, cf root it, go into recovery and flash a custom rom of your choice

Could you please give a bit more detail on how to do this? Im sorry im just new to all this stuff.. Thanks heaps.

Help You
Please take a look here, you will find all the needed tools and soft
http://forum.xda-developers.com/showthread.php?t=948790&highlight=stock
No panic, read on the forum how to work with Odin. And you will be on track soon.

Related

[Q] SGS Not booting (FuGuRoot)

Hi I have tried rooting my SGS using FuguRoot and when its done in Odin it just keeps showing loadscreen and red fish then battery and keeps repeating. Need help please!! Cant use my phone
sohoho said:
Hi I have tried rooting my SGS using FuguRoot and when its done in Odin it just keeps showing loadscreen and red fish then battery and keeps repeating. Need help please!! Cant use my phone
Click to expand...
Click to collapse
And did you flash your stock kernel back after the rooting?
When the phone goes into this loop it cant stop unless I take the battery out, after doing that I try and flash the stock 1 again and it shows the loadscreen and then goes into the loop again. I need urgent help please... I think I may have done some things wrong... Dont know what to do to get my phone just back to the way it was after I updated to 2.2.
Thanks for replying
sohoho said:
When the phone goes into this loop it cant stop unless I take the battery out, after doing that I try and flash the stock 1 again and it shows the loadscreen and then goes into the loop again. I need urgent help please... I think I may have done some things wrong... Dont know what to do to get my phone just back to the way it was after I updated to 2.2.
Thanks for replying
Click to expand...
Click to collapse
So you get into download mode. And you flash stock , but it still shows the fish logo? Just to clarify
No it does the same except it doesn`t show the fish logo, am I maybe flashing the wrong file or not flashing correctly at all?
sohoho said:
No it does the same except it doesn`t show the fish logo, am I maybe flashing the wrong file or not flashing correctly at all?
Click to expand...
Click to collapse
Yes? So you can get easily into the download and recovery mode right? Try to flash some other kernel maybe. fugumod, cf root, speedmod or something .
What rom are you on and what are you trying to flash?
I am on froyo that I downloaded through kies, so now I tried to root my phone with fuguroot when this happened. Isnt there a way to go back to the stock froyo and try flashing fuguroot from there. Isn`t fuguroot and fugumod the same? Sorry for all these qeustions im new
Edit: The thread that i used is: http://forum.xda-developers.com/showthread.php?t=1010141
sohoho said:
I am on froyo that I downloaded through kies, so now I tried to root my phone with fuguroot when this happened. Isnt there a way to go back to the stock froyo and try flashing fuguroot from there. Isn`t fuguroot and fugumod the same? Sorry for all these qeustions im new
Click to expand...
Click to collapse
Fuguroot is just for rooting, not an actual kernel
Fugumod is a full kernel with which you can run your phone
And how did you flash fuguroot ? And where did you get the stock kernel?
Cuz right now I think you flashed a gingerbread kernel on your froyo rom after you rooted with fuguroot.
And the way back if you killed your rom. As long as you are able to get inside the download mode you can flash a full rom 3 parts (maybe with pit and repartition)
I can only get into download mode, recovery mode only shows load screen and hangs. Do I need fugumod to use fuguroot because the rooting wasnt successful thats what im struggling with. I only want to root my phone so I can use one of the lagfixes, dont know which one yet, can you maybe recommend a route for me to take
I flashed fuguroot using the .tar files in that thread throught odin, adding the file to pda and preesing start. It says it completed successfully but when it resets it wont stop.
sohoho said:
I can only get into download mode, recovery mode only shows load screen and hangs. Do I need fugumod to use fuguroot because the rooting wasnt successful thats what im struggling with. I only want to root my phone so I can use one of the lagfixes, dont know which one yet, can you maybe recommend a route for me to take
Click to expand...
Click to collapse
Can you please answer me where you got your stock kernel from ? The one you flashed AFTER fuguroot? Then we can move further.
And also you dont need fugumod even though its a very good kernel. But not sure about the froyo version. First, WHAT did you flash after fuguroot?
PAGOT said:
Can you please answer me where you got your stock kernel from ? The one you flashed AFTER fuguroot? Then we can move further.
And also you dont need fugumod even though its a very good kernel. But not sure about the froyo version. First, WHAT did you flash after fuguroot?
Click to expand...
Click to collapse
I used the JVB file and then tried the other one on the second page of this thread:
http://forum.xda-developers.com/showthread.php?t=1010141
sohoho said:
I used the JVB file and then tried the other one on the second page of this thread:
http://forum.xda-developers.com/showthread.php?t=1010141
Click to expand...
Click to collapse
So as I said, you flashed a gb kernel on a froyo rom. You need a froyo kernel. I have no idea where there are froyo stock kernels. For that you need to google or search here on xda.
or you can try the froyo versions of the kernels I wrote you a post up.
Ok thanks i will try that, will get back to you if i'm struggling
Edit: will this one work?
http://n0rp.chemlab.org/android/nexus/froyo-rooter-signed.zip
sohoho said:
Ok thanks i will try that, will get back to you if i'm struggling
Click to expand...
Click to collapse
If no luck while searching stock kernels you can try this http://fugumod.org/zImage.2.7.tar <<< fugumod full kernel for froyo
or from here speedmod http://forum.xda-developers.com/showthread.php?t=822756
or voodoo or some cf root. really no idea where the stock kernels are
EDIT: that one you found, I dont know, and no idea if it will work. But if you wanna go custom. Try rather the kernels I posted up. (now I hope you have the I9000 too : )
Ive flashed a stock kernel that I found and it hanged at the loadscreen, after that tried flashing fugumod and it`s been hanging on fish logo for about 10 minutes already. Will keep it going a while to see if something happens.
I can however, get into recovery mode now. Is there something I can do from there?
sohoho said:
Ive flashed a stock kernel that I found and it hanged at the loadscreen, after that tried flashing fugumod and it`s been hanging on fish logo for about 10 minutes already. Will keep it going a while to see if something happens.
Click to expand...
Click to collapse
You can try to do a factory reset from the recovery first.
I kinda hope you flashed a kernel for froyo this time. And flashing kernel over kernel and also gb. It might break your rom too. Depends on what the kernels are doing and applying.
If everything fails
Since you know how ot use ODIN if this doesnt work. I think you should try a whole new rom install. Either the one for your country as it is froyo. Or maybe try out the whole new shiny GB
Hi i am trying to flash my rom with a stock froyo rom but i'm not sure if im downloading the correct one. Ive found them here :
http://forum.xda-developers.com/showthread.php?t=846913&highlight=galaxy+rom
And im downloading this one : I9000XWJS8|2.2.1|2011 March|Download
will it solve my problem?
Edit: After flashing a stock kernel a few minutes ago i am unable to go into recovery mode and it still hangs at boot screen, can someone please just give a quick overview on how to flash the new rom.
Thanks
sohoho said:
Hi i am trying to flash my rom with a stock froyo rom but i'm not sure if im downloading the correct one. Ive found them here :
http://forum.xda-developers.com/showthread.php?t=846913&highlight=galaxy+rom
And im downloading this one : I9000XWJS8|2.2.1|2011 March|Download
will it solve my problem?
Click to expand...
Click to collapse
Well I have no idea what rom you had before. From which country and csc you have. Also why are you trying to flash froyo if there is gingerbread?
And I guess the flashing of those custom kernels I wrote you didnt help?
Probably .
But if it fails flash via Odin stock Eclair 2.1 with pit 512 and repartition checked is my get out of jail card .
jje
Hi there,
I had the issue that after apllying FuGus kernel, the phone kept looping in the loading phase (showing the battery symbol) and doing something (busy indicator). Nevertheless, I just switched it off (this worked) and installed the original kernel. Since then, everything works fine.
As I am not allowed to post answers in the dev branches --> @nikademus: Thanks a ton!
Anton

think im bricked galaxy s

ok jist is
tried kernal update, fone stuck on boot screen galaxy s i9000M
SAMSUNG
no matter what i do, even load stock samsung firmware, i get as far as this screen
odlin can still see phone though.
any help would be great
fliptechnologies said:
ok jist is
tried kernal update, fone stuck on boot screen galaxy s i9000M
SAMSUNG
no matter what i do, even load stock samsung firmware, i get as far as this screen
odlin can still see phone though.
any help would be great
Click to expand...
Click to collapse
3 combos buttons work ?
Vol down+home+power on/off ?
Vol Up + home+ power on/off ?
if yes, try to flash the correct rom for I9000M
If you can get into download mode, and Odin sees your phone, then it is very unlikely that you bricked it.
Just flash Darkys ressurection or stock Samsung ROM from Odin.
ok installed darkys, now all phone does is flash galaxy i9000 screen
managed to get past that screen and back to recovery mode, and still d/l mode, trying EZBASE now as i was getting as far as colour S then bursts of vibrations
UPDATE:
stuck on boot loop now, still can access recovery and d/k mode, after trying to install EZBase. is their any other siggestions.
pref, instructions and files for re-loading stock firmware for australia on it, if memory calls had 2.2 of eclair
still no luck people, any further advice please
I just had the same issue with my i9000m. Download the fireware I9000UGJL2.exe from http://forum.xda-developers.com/showthread.php?t=846913
It fixed my issue instantly. Then go to that kitchen rom website and create your own ROM. My phone has never been faster. GPS works very good, way better than before. Even cell service is 100000000000 times better....
ok, good news is i have it working stock rom and rooted, got most aps back on, now my issue is, i cant install clockwork recovery from rom manager, i tried it via odlin and got the screen of phone and pc and the exclamation mark. can some1 please help out as to how i can get clockwork recovery mod installed.
fone details are
galaxy S i9000I now just without the i
firmware 2.1-update1
baseband i9000xxjm4
kernal 2.6.29 [email protected] #2
build ECLAIR.xwjm8
thanks
fliptechnologies said:
i tried it via odlin and got the screen of phone and pc and the exclamation mark.
thanks
Click to expand...
Click to collapse
What did you try flashing with Odin?
electrotune1200 said:
What did you try flashing with Odin?
Click to expand...
Click to collapse
ried flashing
CF-Root-XW_XEE_JVB-v3.1-CWM3RFS
Go to D/L mode and reflash the kernal.
So you tried flashing Chainfires JVB kernal on a 2.1 rom?
I think that's the problem....
electrotune1200 said:
So you tried flashing Chainfires JVB kernal on a 2.1 rom?
I think that's the problem....
Click to expand...
Click to collapse
ok thanks, what should i flash then, or how can i update to 2.2 or 2.3 without loosing files and apps ?
Man you should not try to flash things when you don't understand them.
For this moment you tried to flash a kernel that is for a gingerbread rom (JVB, android 2.3.3) on your Eclair 2.1. Don't you think you should read a bit more before flashing everything on your phone?
Go to the official rom thread and follow the guides to flash a gingerbread(2.3.3) or Froyo(2.2) rom
Ok ill put this as plain and as simple as i can
1. I am new to flashing
2. I asked how to do it, as after all this is a q&a section
3. I feel my questions hvae not been answered correctley
so i shall explain again and this time links may help
1. I want a kernal that will give me recovery options
2. I do not want to loose anything on the phone
3. I want to upgrade to 2.3
so i would like links please or someone who can take the time to write a quicvk step list telling me what to do.
You really need to go to main thread and all info is there, it would take ages to talk you out of this...its all out there, seek and you shall find, its tough love
Sent from my GT-I9000 using XDA App
happened to me ea few nights ago but EZBASE rom got me out of it ,then you can flash a rom from there try it
I agree! Ezbase is a cinge!
Sent from my GT-I9000 using XDA App
/me shakes head, i sware i asked for links, i guess ill go get in trouble again and repost this in a different section.
Just use the search for ezbase 3, would you like your bottom wiped! We try to help...and what thanks??!
Sent from gt i9000 insanity 8.5/fugumod

[Q] Bricked device caused by broken TWLauncher

G'evening guys,
got a little bit of a problem here. My (european) Samsung Galaxy S is screwed. As soon as I boot it up, it loads a custom flashed TWLauncher which immediatly crashes. I can click the message away, but then after a few vibrations it will crash again. I can put it in Kies Mode, but I can't get Kies on Win to start some kind of recovery.
If I try to get into the bootloader, I'm only gonna see the default Samsung bootloader. I tried to push an update.zip on the phone, but it would not install due to some kind of signature errors.
Story first:
1. Rooted it with Superoneclick v1.4
2. Installed Recovery Manager. Not sure if some kind of recovery has been installed, at least none permanent.
3. Updated TWLauncher with SGS Tools in Flash
4. Did a factory wipe
I already tried loading a custom firmware via Update.zip and searched for an official update.zip, but didn't found one.
Also tried to push an older TWLauncher via adb, but this failed as I couldn't use su.
So, does anybody have a clue on how to solve this? Or will the only way to fix it be a send-in to Samsung?
LOL!!!
bricked just because of TWLauncher......
I think that is not brick.....
Flash stock rom via Odin.
Sent from Miui powered SGS
or custom ROM more better and satisfying
azzledazzle said:
Flash stock rom via Odin.
Sent from Miui powered SGS
Click to expand...
Click to collapse
sry for my english
thx for your answer i have tried a few times to flash my sgs with odin but it didnt work . i have started my sgs into the downloding mode and then i start odin to flash and then it does nothing
did you use a guide for flashing through odin? is your phone drivers installed on your computer? what kind of error?
Alright buddy, I agree sounds like you need to reflash a new rom.
Check out this link. By no means am I ordering you to flash darky's rom (even though it is bloody brilliant) It's a good guide for using odin.
If you follow it down to part 2 of the guide then you will have a basically stock Gingerbread with a few tweaks to make it a better experience.
Be sure to read it carefully as some of it isn't necessarily for you.
http://www.darkyrom.com/community/i...g-rc6-need-to-flash-dark_core_2-2-first.2382/
All credits go to darky, ficeto and ceriko obviously for the rom & guide.
Good luck
It's only a BRICK if the device is completely unrecoverable. This isn't even a soft-brick... the launcher just crashed.
Flash a new rom with ODIN;
or Flash a Kernel with CWM recovery via ODIN, and then boot into recovery.
Odin will work; just make sure you've got the drivers installed.
@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?
Thanks for your help my sgs is working again the thread can be closed
You made it sound as if your phone was bricked! lol
I'd recommend you to install the Darky ROM 9.5.
I myself am a totally new Android and Galaxy S user. The first thing I did after unboxing my phone was to flash Darky's 9.5 on it. Its brilliant.
Here's the guide.
EDIT: Turns out I'm not allowed to post links. Well use google!
bigred85 said:
@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?
Click to expand...
Click to collapse
Glad your sgs is back up and running buddy
Like what everyone els is saying, a reflash is the way to go. Id recomend flashing with EZbase. they offer the best stocklike roms.
bigred85 said:
Thanks for your help my sgs is working again the thread can be closed
Click to expand...
Click to collapse
Read the god damn thread people. Problem solved. Let this thread die.

[Q] am i completely screwed?semi bricked sgs??

hi.thouh i am quite experienced user here.i have read everything possible.
now how i got this.here is the story.
i had sgs i 9000 version
android 2.3.3
jvk version
then i just rooted it using odin.fine.
use speedmod kernel for gingerbrid works firne.
then when i tried to go to that rooted stock kernel made by chainfire it rebbot then
here is story..
samsung boot scree looping again again.
i can enter in recovery mode and download mode,
tried nandroid restore but same happen.
plz help what to do to make it alive.
i know its not bricked bit i didnt worked either?//
Get into download mode and re-flash a stock 2.3.3 or a 2.3.4 rom with Odin and it should help fix the boot looping.
any stock firmware .i just downloaded this from forst link.
http://forum.xda-developers.com/showthread.php?t=1011901
will it work?
NO ONE??/my * is burning.i got very sow internet,
Yes any of those in that thread, Froyo or Gingerbread should get you sorted out.
i mean first one 2.3.4 jvq veersion in the given link bddy.is it okay?
should i tick re partion in odin or not with this 2.3.4 jvq version?
JVQ is fine.
If it's a 3 part firmware (separate phone,pda, csc), then 515 pit is required with repartition ticked.
hey thefirmware i download is just .exe file.one file what to do
Uploaded it for you.
Just unzip it then add it to Odin.
Double click it as it has to extract, which then will give you 3 files.
holdz said:
Uploaded it for you.
Just unzip it then add it to Odin.
Double click it as it has to extract, which then will give you 3 files.
Click to expand...
Click to collapse
Thanx a lot got my phone alive back
saurabh88 said:
Thanx a lot got my phone alive back
Click to expand...
Click to collapse
Awesome, glad I could help

Galaxy mini 2 Bricked

So I tried to install a rom and every thing went fine. I rebooted my phone via clockworkmod and then it shows me the logo of Galaxy mini 2 and the screen gets whiter and whiter. I tried going back to CWM but it wont open the only thing i can do is go to download mode.
So if somebody coud help me i would appreciate it.
Have you tried reflashing stock?
So are we now creating new topic for every brick? I had the same problem, it's a brick. What did you do?
TheWhisp said:
So are we now creating new topic for every brick? I had the same problem, it's a brick. What did you do?
Click to expand...
Click to collapse
Sorry I didnt know there was a topic already made. I accidently flashed with CWM a rom that was not made for galaxy mini 2. So is there a way to unbrick it using odin?
easy
MINI 2 said:
Sorry I didnt know there was a topic already made. I accidently flashed with CWM a rom that was not made for galaxy mini 2. So is there a way to unbrick it using odin?
Click to expand...
Click to collapse
go into download mode and flsh stock rom via odin
did you flash the trebon build ? If so, you should be able just to reflash with odin
TheWhisp said:
did you flash the trebon build ? If so, you should be able just to reflash with odin
Click to expand...
Click to collapse
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
MINI 2 said:
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
Click to expand...
Click to collapse
Download a rom from sammobile for GT-S6500(D or whatever) then download odin3 put ur phone in DL mode press power vol down and home
Install kies and reboot pc
Open Odin3 go to PDA and select the file u downloaded
Press start and wait
Sent from my GT-S6500D using xda app-developers app
MINI 2 said:
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
Click to expand...
Click to collapse
You could follow my TUT here. xD
take the flashing guide part
Next time, please, check carefully what you're flashing.
Thank you all for your comments.
TheWhisp said:
Next time, please, check carefully what you're flashing.
Click to expand...
Click to collapse
Will do.
How could you even flash it since the updater-script cancels installation if the device name/model number is not in the list?
TheWhisp said:
How could you even flash it since the updater-script cancels installation if the device name/model number is not in the list?
Click to expand...
Click to collapse
Idk, i downloaded it and installed with CWM 6.0.2.8. I havent had any error or warning.
If you can access the Download Mode flash the stock firmware.. mine can't even acces the Download Mode even with USBJig, it still shows a white line..
he had a soft brick, you had a hard brick.. take it to the service center
This should be posted in Q n A not in Android Development.
then report it...posting there is waste of time...since most or all of mini 2 users are here...

Categories

Resources