Database Develop

[Q] Help, phone stuck booting?!

I flashed darky's rom with the voodoo lag fix and then stupidly tried to flash over the top my recovery file. now its stuck loading. can't access recovery mode but can access download mode... any ideas?

Just posted this in another thread, with similar issues, try this, should fix it.
--------------------------------
HI,
Try the following, worked for me
1) Go into recovery mode and wipe both cache and partition data
2) go to samfirmware.com and download the original rom for your phone (the one that came with it)... since you don't say what region you're from, I'll give you an example with mine. Mine is from Bell, and factory comes with UGJH2, so i downloaded that with ODIN and the PIT FILE, make sure to extract the TAR file from inside the RAR file. Put all 3 files in the same folder
3) Enter download mode, when the phone is in that state sometimes it's hard to access download, best way is... remove the battery, put it back in, then hold VOL DN + HOME + POWER until you see a working android bot inside a triangle. When you see that, connect your phone to your PC, double click on ODIN, then load the PIT file (CHECK BOX RE-PARTITION leave the others to default) and Select PDA and find the TAR file you extracted in STEP 2... then click on START, it's gonna take a few mins, and even after it's done, it's going to reboot, and it'll stay at the "S" logo for a bit, leave it, then it'll boot.
At least we hope it will.
Keep us posted,
Thank you,
Rodi.
------------------------------------

Can't get into recovery mode only download mode?! I'm on orange uk custom galaxy S Rom 2.1 originally. shall i just follow your steps but use a stock samsung android firmware?
Thanks Alot btw!

Yeah keep going with the download mode, it's very possible that the recovery mode process is not even necessary, but since I have no way of testing, it's doesn't hurt to try.
so get the orig rom, with pit associated with its (u'll see in on sam firmware which pit you need, most likely 512 for stock out of the box).
Keep us posted
Rodi

Fixed!!! flashed the new 2.2.1 firmware as well. is flying thanks for the help

alcurtis93 said:
Fixed!!! flashed the new 2.2.1 firmware as well. is flying thanks for the help
Click to expand...
Click to collapse
i have the same problem as u ..which 2.2.1 firmware did u flash and where to download ?
Cris

Dont worry mate easier to fix than I thought. Go to samfirmwares and go to firmware section and galaxy s and its called I9000 jpu. If you need any more help dont be afraid to ask
Sent from my GT-I9000 using XDA App

Heres the link.... http://www.multiupload.com/PUSOOBQ8K5
Password is samfirmware.com
Sent from my GT-I9000 using XDA App

alcurtis93 said:
Heres the link.... http://www.multiupload.com/PUSOOBQ8K5
Password is samfirmware.com
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks so u much

SGS Back to life using a jig.. now what?

I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks

Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App

Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App

repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks

Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App

Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App

Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks

Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App

Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.

It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!

tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom

unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers

Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?

Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked

The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!

[Q] Did I bricked my phone? and what should I do?

Last week I flashed xxjvk to my SGS the version which has bootloaders, but I didnt like it and flahed back to I9000XWJS8|2.2.1| with the instructions in the fallowing link via the ODIN. http://forum.xda-developers.com/showthread.php?t=846913
Now I can see the boot animation, but after that, with lights on, i can only see a black screen. Is there any suggestions what should i do to save my phone?

zsa4041 said:
Last week I flashed xxjvk to my SGS the version which has bootloaders, but I didnt like it and flahed back to I9000XWJS8|2.2.1| with the instructions in the fallowing link via the ODIN. http://forum.xda-developers.com/showthread.php?t=846913
Now I can see the boot animation, but after that, with lights on, i can only see a black screen. Is there any suggestions what should i do to save my phone?
Click to expand...
Click to collapse
Did you flash with one or three files? i can't se that without download JS8.
If you flashed with one file i guess you have to find a rom with three files so that you can flash with pit-file and re-partition to sort out the problem with your phone.
Cheers.
/qsec

yes i did with just the one tar file, so what pit should i use and is there a thread about how to do this, so u can link?
thank you for a quick reply

zsa4041 said:
yes i did with just the one tar file, so what pit should i use and is there a thread about how to do this, so u can link?
thank you for a quick reply
Click to expand...
Click to collapse
There is a link to Odin with PIT-files in the link that you refered to.
Use 512-pit and set Odin up as the second picture (how to flash with three files)
Cheers
/qsec

Thank you man it solved my problem, my beloved one is back to me again

Frozen at samsung screen

I was going through the below tutorial everything seem to go find until i restarted. Then it froze and has been frozen for a while im trying to wait an hour its been about 20 minutes.
Any thoughts ideas on where to start to get my device rolling or is it done for. thanks for any device you can provide.
the unlockr .com/
2010/11/29/how-to-flash-a-custom-recovery-image-on-the-samsung-galaxy-tab]

did you use CWM from Rom Manager?
This is NOT optimized for the SGT.. nor is it encouraged.
Anyhow, have you tried to check if your computer can detect your tab, through Kies or Odin?

Sef_P1000 said:
did you use CWM from Rom Manager?
This is NOT optimized for the SGT.. nor is it encouraged.
Anyhow, have you tried to check if your computer can detect your tab, through Kies or Odin?
Click to expand...
Click to collapse
Yes I did use CWM from Rom Manager
Kies says connecting but doesn't ever connect
Odin3 says 0:[COM6]
so what can I do?

what you can do , is go grab the stock gingerbread and flash it via odin and then take the root file and u'll have both gingerbread and also the cwm ...
follow chainfire steps and u'll do it in 4mins

k0sh said:
what you can do , is go grab the stock gingerbread and flash it via odin and then take the root file and u'll have both gingerbread and also the cwm ...
follow chainfire steps and u'll do it in 4mins
Click to expand...
Click to collapse
t
What do you mean do you have instructions somewhere? please post thanks for your help

iamahero said:
t
What do you mean do you have instructions somewhere? please post thanks for your help
Click to expand...
Click to collapse
he was pertaining to this thread..
http://forum.xda-developers.com/showthread.php?t=1073854

noxxious said:
he was pertaining to this thread..
http://forum.xda-developers.com/showthread.php?t=1073854
Click to expand...
Click to collapse
You the dude
Sent From (I'm In Luv With My Tab)

similar problem....also stuck on boot
but I got there a different way. (FIXED)
Let me start off by saying I am stupid I have a tmobile tab and it was running awesome on overcome 2.0.0 rc1 with ext4 conversion and OC kernel and then I saw the honeycomb alpha had been released for cdma, which of course I dont have (gsm), and decided to try the rom with the oc gsm kernel, which didnt work.
then I dun goofed. Instead of going back to overcome in cwm, I flashed the damn experimental honeycomb package again, kernel and all and then loaded the tab.....dumb...weird colors and then nothing....screen just goes black and no matter what I cannot see cwm screen. And now odin no longer recognizes the tab.
heimdall works and I flashed back kernal from :[OC/UV][7th Jun][Kernel] koxudaxi kernel [GSM][2.2&2.3][KernelPatch]
which gives me cwm, but it keeps giving me an error that i cant mount sd card
I have tried flashing the safe gingerbread stock with pit file (still stuck on boot logo)
then tried flashing rotostock tmobile rom ( but no pit file and when it boots it still shows the gingerbread bootlogo)....do i flash with P1_add_hidden.pit added?
Any and all help will be much appreciated. please don't be too mean. I know i shouldn't have done what i did
[UPDATE]
So I figured it out. I reinstalled samsung usb driver from within odin folder, and odin suddenly started working. went back to stock GB and then on to Overcome 2.0.0 Gold w/ ext4 and oc'd to 1.4
I had to reinstall the hiemdall driver too after reinstalling samsung driver, but now they both work again....... so stoked

[Q] I have bricked my I9000?

Hi,
I have a I9000BVJP4 (FROYO.BVJS4) phone bought in 2011 from Orange in the UK. I was trying to root the bastard to get Jelly Bean on it. I coulddnàt get 4zroot to root it, neither Once Click root method (earlier would not reboot the phone and Titanium said it wasn't rooted anyway and the second just said "failed" when it got to the end of the process).
So I decided to use the CF root method. I downloaded the various cf kernels here http://forum.xda-developers.com/showthread.php?t=788108 as I thought I needed to match the JS bit. So I tried JS3 which looped on intial screen the first time. JS5 and JS7 just hang on the first screen. Clearly I can get ODIN 3.07 to upload these kernels so I can get the phone to switch to download mode. THe problem is that it hangs and never boot.
I'm a bit of newbie with this stuff but I understand that as long as i can get into download mode I haven't bricked the beast. THe problem is that I donàt know how to out of this situation. I bet it's just a question of finding the right kernel and uploading with ODIN. Any suggestions? I presume the phone is still unrooted (or maybe not now that I have all these kernels uploaded through ODIN?)
Your help would be most appreciated.
Many thanks
Antonio

geotux said:
Hi,
I have a I9000BVJP4 (FROYO.BVJS4) phone bought in 2011 from Orange in the UK. I was trying to root the bastard to get Jelly Bean on it. I coulddnàt get 4zroot to root it, neither Once Click root method (earlier would not reboot the phone and Titanium said it wasn't rooted anyway and the second just said "failed" when it got to the end of the process).
So I decided to use the CF root method. I downloaded the various cf kernels here http://forum.xda-developers.com/showthread.php?t=788108 as I thought I needed to match the JS bit. So I tried JS3 which looped on intial screen the first time. JS5 and JS7 just hang on the first screen. Clearly I can get ODIN 3.07 to upload these kernels so I can get the phone to switch to download mode. THe problem is that it hangs and never boot.
I'm a bit of newbie with this stuff but I understand that as long as i can get into download mode I haven't bricked the beast. THe problem is that I donàt know how to out of this situation. I bet it's just a question of finding the right kernel and uploading with ODIN. Any suggestions? I presume the phone is still unrooted (or maybe not now that I have all these kernels uploaded through ODIN?)
Your help would be most appreciated.
Many thanks
Antonio
Click to expand...
Click to collapse
Here's the download link for XXJVU ,
http://hotfile.com/dl/145862376/8b52c96/I9000XWJVU_I9000TMNJV4_TMN.zip.html
hope you know how to flash the firmware and the pit file is attached , while selecting the files to flash , check the .pit file and select the attached .pit file and check the repartition option in odin , and flash the firmware this will wipe all your partitions and and a new clean firmware will be installed .Now how to root your phone , download this kernel its semaphore 2.5.0 beta JVU
http://www.semaphore.gr/kernels/Semaphore_2.5.0.tar
flash this kernel by selecting the PDA file in the odin menu , now your phone is rooted . and you can install any desired custom rom.

This rocks ...
dashing_9508 said:
Here's the download link for XXJVU ,
http://hotfile.com/dl/145862376/8b52c96/I9000XWJVU_I9000TMNJV4_TMN.zip.html
hope you know how to flash the firmware and the pit file is attached , while selecting the files to flash , check the .pit file and select the attached .pit file and check the repartition option in odin , and flash the firmware this will wipe all your partitions and and a new clean firmware will be installed .Now how to root your phone , download this kernel its semaphore 2.5.0 beta JVU
http://www.semaphore.gr/kernels/Semaphore_2.5.0.tar
flash this kernel by selecting the PDA file in the odin menu , now your phone is rooted . and you can install any desired custom rom.
Click to expand...
Click to collapse
Mate,
cheers for this although the XXJVU ROM you suggested didn't work. I decided to give the XXJVT version a go which I downloaded from here http://forum.xda-developers.com/showthread.php?t=1102881 and I tell you this rocks. I've finally got rotation working again and have got rid of all the crap that Orange installed.
Do you know if Jelly Bean works on the I9000 and how it performs? Is it worth installing on such an "old" device? BTW, I used the same pit file you attached. That did work. Thanks again.

geotux said:
Mate,
cheers for this although the XXJVU ROM you suggested didn't work. I decided to give the XXJVT version a go which I downloaded from here http://forum.xda-developers.com/showthread.php?t=1102881 and I tell you this rocks. I've finally got rotation working again and have got rid of all the crap that Orange installed.
Do you know if Jelly Bean works on the I9000 and how it performs? Is it worth installing on such an "old" device? BTW, I used the same pit file you attached. That did work. Thanks again.
Click to expand...
Click to collapse
No problem ever . yep, Jellybean works , infact it rocks ! . the stock gingerbread firmware is crap if compared with jellybean . I use cm 10.1 Android 4.2.2 makes my phone butter smooth doesn't matter its quite old though but works like a charm. did you root your phone ? using semaphore kernel ? you have to root it first to install jellybean for XXJVT , here's the link for the kernel :-
http://78.46.194.137/kernels/Semaphore_kernel_JVT_1.9.1.tar
flash it the way i told you , you have to select it in the PDA file option in Odin. hope it works for you now .

http://www.youtube.com/watch?v=1RoZU5ZPMS4
http://www.darkyrom.com/index.php?posts/180469/
check these out