Hi at all,
i have just flashed JPV1, and seem the superoneclick (1.7) cannot root the phone .....i have both tryed 'psneuter' and 'rageagainstthecage' method always blocked at "running psneuter/rageagainstthecage".
Could you help me ?
use cf root
http://forum.xda-developers.com/showthread.php?t=788108
Will CF root work on Gingerbread?
msolus said:
Will CF root work on Gingerbread?
Click to expand...
Click to collapse
Yep it does.
hi I successfully rooted XWJV1 using CF root and odin and I realize I doesn't revert 3e recovery to 2e... so my question is how do I apply a "lagfix"?
voodoo cannot be installed via update.zip (unsigned) and I'm not sure what are the effects of flashing the voodoo 3.0 odin package.. does it overwrite the CF root? conflict with it ..? anyone tried this?
thanks!
Have you read the informations in the JVE thread? in the first post?^^
I'm pretty certain there's even a link to the thread you're looking for.
here's the post that is quoted in mentioned first post
theduckking said:
Have you read the informations in the JVE thread? in the first post?^^
I'm pretty certain there's even a link to the thread you're looking for.
here's the post that is quoted in said first post
Click to expand...
Click to collapse
hi, thanks for that, a bit new to forums so a 50+ page thread is a little overwhelming
i will read through it cheers.
bys299 said:
hi I successfully rooted XWJV1 using CF root and odin and I realize I doesn't revert 3e recovery to 2e... so my question is how do I apply a "lagfix"?
voodoo cannot be installed via update.zip (unsigned) and I'm not sure what are the effects of flashing the voodoo 3.0 odin package.. does it overwrite the CF root? conflict with it ..? anyone tried this?
thanks!
Click to expand...
Click to collapse
use odin to flash it
msolus said:
Will CF root work on Gingerbread?
Click to expand...
Click to collapse
Yes take the xwjv1 cf but no cwm...
to have it you have to flash a speed kernel ...or a kernel with cwm
Related
i kept searching this but i just coulnt get the answer....
my question is a very simple yes or no type..
Can i update my rooted/lagfixed captivate to froyo using odin like
http://forum.xda-developers.com/showthread.php?t=731989 says
or do i have to unroot it first?
yes...........................
yes as in
yes i can update it or
yes you have to unroot
bluemoon1221 said:
i kept searching this but i just coulnt get the answer....
my question is a very simple yes or no type..
Can i update my rooted/lagfixed captivate to froyo using odin like
http://forum.xda-developers.com/showthread.php?t=731989 says
or do i have to unroot it first?
Click to expand...
Click to collapse
Yes you can update without unrooting. The flash will remove the root. Beware the one you posted is for stock JF6. Find the rom you want to flash and read the op to determine the correct flashing method.
Happy modding!
Being rooted is fine, but you need to disable the lagfix
vafifty4 said:
Being rooted is fine, but you need to disable the lagfix
Click to expand...
Click to collapse
Not entirely true as it depends on the lagfix. RyanZA's OCLF does not need to be disabled to use Odin.
I am on the latest gingerbread DXJPE. As most of you know Z4Root and Superoneclickroot and Gingerbreak don't work on this firmware.
We have available CF-root by Chainfire, DiP7 kernel, and Overcome which have root in addition to other features.
Myself and others that don't want OC/UV or CWM or Voodoo but want to use Titanium backup,etc want a simple root application or a patch to our firmware.
I cannot understand why can't a straightforward root cannot be done unless you have CWM or OC/UV....
So I am pleading/begging you expert coders/programmers in XDA-PLEASE PROVIDE A SIMPLE ROOT APP/PATCH FOR THE LATEST GINGERBREAD.
THANKS!
bongski55 said:
I am on the latest gingerbread DXJPE. As most of you know Z4Root and Superoneclickroot and Gingerbreak don't work on this firmware.
We have available CF-root by Chainfire, DiP7 kernel, and Overcome which have root in addition to other features.
Myself and others that don't want OC/UV or CWM or Voodoo but want to use Titanium backup,etc want a simple root application or a patch to our firmware.
I cannot understand why can't a straightforward root cannot be done unless you have CWM or OC/UV....
So I am pleading/begging you expert coders/programmers in XDA-PLEASE PROVIDE A SIMPLE ROOT APP/PATCH FOR THE LATEST GINGERBREAD.
THANKS!
Click to expand...
Click to collapse
I am rooted on 2.3.4 and I don't have CWM. It's super easy to flash with Odin, no harder or longer than rooting with SuperOneClick would be.
prezmater said:
I am rooted on 2.3.4 and I don't have CWM. It's super easy to flash with Odin, no harder or longer than rooting with SuperOneClick would be.
Click to expand...
Click to collapse
May I ask what you used to root?
Update/edit: You have a sprint tab....
I agree, I have tried CF-root,DiP7 kernel and Overcome Gold. I have also posted my problems re: CWM but there seems to be nobody interested. I even asked Chainfire the author of CF-root for a way to root without the "extras" but he said it is not possible.
Maybe I will just be content on what is available?....
bongski55 said:
May I ask what you used to root?
Update/edit: You have a sprint tab....
I agree, I have tried CF-root,DiP7 kernel and Overcome Gold. I have also posted my problems re: CWM but there seems to be nobody interested. I even asked Chainfire the author of CF-root for a way to root without the "extras" but he said it is not possible.
Maybe I will just be content on what is available?....
Click to expand...
Click to collapse
hey buddy , what rom are u using ? and how come you are not able to root it until now ? there is no tab is not rooted tbh
k0sh said:
hey buddy , what rom are u using ? and how come you are not able to root it until now ? there is no tab is not rooted tbh
Click to expand...
Click to collapse
DXJPE. I have already tried rooting successfully- it's just that I wanted to have root with the following:
1. Stock boot animation with sound.
2. use of the default recovery instead of CWM.
3. be able to change CSC with no errors
All of the above can be done when I rooted using Z4root or superoneclick but not CF-root or Dip7 or more so not with overcome.
the stock bootanimations its already in the stock and it will only work in the stok !!!
if you rooted with superoneclick or Z4root how come you get CWM ? it only suppose to flash ROOT (superuser and busy box) thats all
to change the CSC ,tbh , its sucks way to do so , so ignore it and don't worry about it i also wanna try update via kies but never had
I think the person who posted the original question has a GSM tab and the guy who replied has the cdma sprint tab. The flash for cdma/sprint won't work for GSM. I might be wrong but if you try to flash with the wrong thing, there's an excellent chance you're going to bork your GSM tab. Same thing applies with the other android device I'm dealing with, the nexus s 4g. The GSM and cdma for ns4g and ns are different. The software and hardware under the Hood are different. Not drastically different but enough to make it so that development for the two types must be separate and aren't interchangeable.
oscarthegrouch said:
I think the person who posted the original question has a GSM tab and the guy who replied has the cdma sprint tab. The flash for cdma/sprint won't work for GSM. I might be wrong but if you try to flash with the wrong thing, there's an excellent chance you're going to bork your GSM tab. Same thing applies with the other android device I'm dealing with, the nexus s 4g. The GSM and cdma for ns4g and ns are different. The software and hardware under the Hood are different. Not drastically different but enough to make it so that development for the two types must be separate and aren't interchangeable.
Click to expand...
Click to collapse
to root a phone it doesn't matter if its CDMA or GSM , what is matter if you flashed rom is not for your tab ,
root only contains SUPERUSER and BUSYBOX and nothing else , what chainfire posted is a Kernel and not Root , but kernel contain both , CWM and Root access , and the kernels are for specific tabs.
my point is to root , it doesn't matter if you are GSM or CDMA , then how Z4root work or Superoneclick ? they just push the busybox and superuser to the system. so basically Root tools aren't that harm to your phone or tab
k0sh said:
the stock bootanimations its already in the stock and it will only work in the stok !!!
Click to expand...
Click to collapse
Nope,CF-root removes the stock bootanimation....
k0sh said:
if you rooted with superoneclick or Z4root how come you get CWM ? it only suppose to flash ROOT (superuser and busy box) thats all
Click to expand...
Click to collapse
if you read my original post no. 1 DXJPE cannot be rooted using superoneclick or z4root
k0sh said:
to change the CSC ,tbh , its sucks way to do so , so ignore it and don't worry about it i also wanna try update via kies but never had
Click to expand...
Click to collapse
I have to hack the CSC and install the hacked file via CWM to change the CSC. Cannot use *#272*IME# which was so much easier....
bongski55 said:
Nope,CF-root removes the stock bootanimation....
Click to expand...
Click to collapse
there is a thread in the android section called guide how to made bootanimation and with sound , there is the file there , grab it and try to push it via emulator and see how it will work with you
if you read my original post no. 1 DXJPE cannot be rooted using superoneclick or z4root
Click to expand...
Click to collapse
is it arabic rom or which region ? i can't understand what you want ? i mean everybody is hoping\wishing to get CWM so why you don't track the superuser where its located and the busybox and try to push them via adb or root explorer maybe this will work
I have to hack the CSC and install the hacked file via CWM to change the CSC. Cannot use *#272*IME# which was so much easier....
Click to expand...
Click to collapse
even though , you'll not be able to update via kies , because its also require PDA and phone to be change , its really SUCKS
i agree...im waiting for a no-flash method....
Ayoko mavoid warranty..hehe
I have to hack the CSC and install the hacked file via CWM to change the CSC. Cannot use *#272*IME# which was so much easier....
Click to expand...
Click to collapse
No...just edit the /system/CSC/sale_code.dat file to whatever u want.
biopsin said:
No...just edit the /system/CSC/sale_code.dat file to whatever u want.
Click to expand...
Click to collapse
Are you sure that by only editing the dat file you will also reset the settings to the CSC that you choose? Example are language,frequency settings,applications for the region,etc?
What I know is that the CSC should match a nv_data.bak file for your particular firmware. If there is no match then it will be pointless to change CSC but just changing to any value.
BTW,hacking the cache file and installing the hacked file via CWM also solves the missing PDA and CSC ....
musashiro said:
i agree...im waiting for a no-flash method....
Ayoko mavoid warranty..hehe
Click to expand...
Click to collapse
Root= warranty void
yeah.... but im assuming that a no-flash method comes with an unroot button..hahahaha
The advantage of android is that non market apps can be installed even without root. IOS in idevices do not allow non appstore apps to be installed unless jailbroken.
Also apps which require root are available for android on the market while you will find similar apps only thru cydia.
Sent from my GT-P1000 using Tapatalk
k0sh said:
is it arabic rom or which region ? i can't understand what you want ? i mean everybody is hoping\wishing to get CWM so why you don't track the superuser where its located and the busybox and try to push them via adb or root explorer maybe this will work
Click to expand...
Click to collapse
Our firmware is DXJPE, w/c is the asian region... I think there is an option for gingerbreak on superoneclick but I personally have not tried it out... Maybe bongski can try it out and see if it works...
@bongski: There is an option on superoneclick for "gingerbreak", just take a look at the available option, it may work for you... I don't have superoneclick on my laptop so I cannot tell you where exactly is that option... Try it out and see if it works...
I don't root my TAB, only on froyo when I want to flash other ROMS, so I can't be of much help here...
Both gingerbreak under superoneclick and the gingerbreak.apk don't work on the JPE firmware. I think the exploit in which gingerbreak is based is already closed by samsung.
the root you are able to achieve is through the rom not the kernel or recovery or any of that. that is not a horrible issue especially since there are only a hand full of roms. what has happened in the epic 4g forum is that some roms rely on kernel root and others rely on rom root, like what we have. rom root is fine for average root users cause you can get into the root directory and install or remove stuff at your whim. the issue will arise when the recovery is in place and roms are being developed. if you have a kernel thats not rooted and you flash a rom that isnt baked with root then you lose root. its kind of a chicken and the egg discussion on the surface. i imagine that kernel and recovery devs can argue the preferred method, but for most end users its moot. from what ive learned devices have a recovery kernel and a "rom" kernel. one gets you up and going and allows recovery to boot and the other will control how the rom runs. people have had some issues when they flash what that think is substantial kernel and use an app like quick boot only to find out they dont have a custom recovery like cwm. however when using 3 finger boot or in our case vol up +power they find the custom recovery. a rooted and properly flagged recovery kernel will boot into the custom recovery from the app or from the hardware induced recovery boot. if you read through oldmacnut's thread he eludes to partial root issues. again when our root comes through an odin of a rom thats got root baked in, you dont get to access all the innards of the device and the possibilities that other devices are seeing.
thats my interpretation of the situation
Well today I flashed back to stock 2.2 and updated Through Kies trying to get my GPS working, to my surprise I ended up with UXKH2 Gingerbread 2.3.3. I Haven't heard that Rogers/Samsung pushed the update for Captivate yet. I Tried rooting with Superoneclick but was unable to. So i tried Designgears auto root for UCKF1 but that didn't work either and soft bricked me, so now I'm back on stock Froyo. Any ideas how to root Gingerbread 2.3.3? I'm a CM7 user but would like to stay on the official Gingerbread bootloaders for easy testing .
Fugumod, its a kernel swap method, but you will need to somehow back up the kernel you have now, do that street rooting you can flash back to it.
mrhaley30705 said:
Fugumod, its a kernel swap method, but you will need to somehow back up the kernel you have now, do that street rooting you can flash back to it.
Click to expand...
Click to collapse
I'm setup to dump and create my own odin tars to dump my kernel, but I need root to do it. Maybe I'm missing something here. I've only been modding android for a few weeks now.
miller420 said:
Street Rooting?
I'm setup to dump and create my own odin tars to dump my kernel, but I need root to do it. Maybe I'm missing something here. I've only been modding android for a few weeks now.
Click to expand...
Click to collapse
Damn Swype. After rooting. The fugu kernel won't actually let the phone completely boot up. You need a kernel to flash afterward.
mrhaley30705 said:
Damn Swype. After rooting. The fugu kernel won't actually let the phone completely boot up. You need a kernel to flash afterward.
Click to expand...
Click to collapse
lol I use swype too, its fast but sometimes does more bad than good. Now how to backup this damn kernel!
Try pm'ing Nerz. He may be able to help you with a partition dump without being rooted.
miller420 said:
Well today I flashed back to stock 2.2 and updated Through Kies trying to get my GPS working, to my surprise I ended up with UXKH2 Gingerbread 2.3.3. I Haven't heard that Rogers/Samsung pushed the update for Captivate yet. I Tried rooting with Superoneclick but was unable to. So i tried Designgears auto root for UCKF1 but that didn't work either and soft bricked me, so now I'm back on stock Froyo. Any ideas how to root Gingerbread 2.3.3? I'm a CM7 user but would like to stay on the official Gingerbread bootloaders for easy testing .
Click to expand...
Click to collapse
So I see its only 2.3.3
Geezer000 said:
So I see its only 2.3.3
Click to expand...
Click to collapse
Yup, just finished upgrading and now trying to figure out how to get root back.
Yeah that's the dilemma lol
Sent from my SGH-I896 using xda premium
What is the new modem included with it? Possible you could rip it and upload?
Sent from my Captivate running CyanogenMod7 using XDA Premium App
SuperOneClick works for anyone?
dont forget the original stork roms in my signature!!!! 2.1 and 2.2 Rogers Captivate!
link for xda app people : http://bit.ly/eqg4W2
brendanmurphy said:
What is the new modem included with it? Possible you could rip it and upload?
Click to expand...
Click to collapse
The modem is i896UXKH2 (KH2), but first we need root to rip anything.
SaHiLzZ said:
SuperOneClick works for anyone?
Click to expand...
Click to collapse
I've tried numerous times but can't get passed step #7.
TRusselo said:
dont forget the original stork roms in my signature!!!! 2.1 and 2.2 Rogers Captivate!
link for xda app people : http://bit.ly/eqg4W2
Click to expand...
Click to collapse
Well if we get root and rip 2.3.3 you'll have another to add to the collection.
Anyone know how to dump a stock kernel? or do we need to jtag?
Welp, I really should've checked if root was available for this new version before diving in and installing it.
Sigh.
Hey guys has anyone been able to root Rogers 2.3.3?? I've tried SuperOneClick and it failed at step#6.
Root achieved!!!
ROOT ACHIEVED!!!
http://forum.xda-developers.com/showthread.php?p=17865158#post17865158
it is a kernel swap method.
fugu kernel (odin package) flash, let bootloop reboot into download mode
and the new rogers kernel in an odin package. reboot
DONE!
not just winning, but won!
TRusselo said:
ROOT ACHIEVED!!!
http://forum.xda-developers.com/showthread.php?p=17865158#post17865158
it is a kernel swap method.
fugu kernel (odin package) flash, let bootloop reboot into download mode
and the new rogers kernel in an odin package. reboot
DONE!
not just winning, but won!
Click to expand...
Click to collapse
Do you have an ETA on a flashable stock image? I'd love to avoid KIES all together.
TRusselo said:
ROOT ACHIEVED!!!
http://forum.xda-developers.com/showthread.php?p=17865158#post17865158
it is a kernel swap method.
fugu kernel (odin package) flash, let bootloop reboot into download mode
and the new rogers kernel in an odin package. reboot
DONE!
not just winning, but won!
Click to expand...
Click to collapse
This is complete B.S!! It deleted my "App Backup" folder in my external sd-card, now I have to re-download all my apps from the Internet !! But it rooted my phone.
Worked perfect for me. Got my root back!
Ymodem-G said:
Do you have an ETA on a flashable stock image? I'd love to avoid KIES all together.
Click to expand...
Click to collapse
Stock image can be found in the same thread as the root method.
---------- Post added at 08:24 PM ---------- Previous post was at 08:21 PM ----------
Nick0703 said:
This is complete B.S!! It deleted my "App Backup" folder in my external sd-card, now I have to re-download all my apps from the Internet !! But it rooted my phone.
Click to expand...
Click to collapse
Not sure how that happened...
---------- Post added at 08:26 PM ---------- Previous post was at 08:24 PM ----------
TRusselo said:
ROOT ACHIEVED!!!
http://forum.xda-developers.com/showthread.php?p=17865158#post17865158
it is a kernel swap method.
fugu kernel (odin package) flash, let bootloop reboot into download mode
and the new rogers kernel in an odin package. reboot
DONE!
not just winning, but won!
Click to expand...
Click to collapse
Your stock images saved my ass a bunch of times so im glad I could return the favour
is there a way that i could root galaxy tab gt-p1000 using only adb, i need the files , like SU,the unlock procedure of the bootloader, recovery for GTAB , and instructions if there is any.. thank you and good day XDA! i cant use superone click my pc identifies it as a malicious file...
Disable the antivirus then.
Anyway, follow my signature for overcome method.
Sent from my GT-P1000 using xda app-developers app
Yes, you can. Google for the such files, or flash overcome kernel as priyana has mentioned. You can also root it by flashing cf root files via Odin. You will find it in a pos by me named stock to ics
gogol1996 said:
Yes, you can. Google for the such files, or flash overcome kernel as priyana has mentioned. You can also root it by flashing cf root files via Odin. You will find it in a pos by me named stock to ics
Click to expand...
Click to collapse
hi problem solved thanks guys .. now my GTab p1000 is rooted ... i didnt used superoneclick, i used odin instead... byt the way ive been reading though some of the roms, whats with this overcome procedure on rooting different with other kinds of rooting? does that mean i cant use other roms specifically the ones that need this overcome method?...
Mario Christian Oquias said:
hi problem solved thanks guys .. now my GTab p1000 is rooted ... i didnt used superoneclick, i used odin instead... byt the way ive been reading though some of the roms, whats with this overcome procedure on rooting different with other kinds of rooting? does that mean i cant use other roms specifically the ones that need this overcome method?...
Click to expand...
Click to collapse
No difference. Just kernel (the brain of your device) will be different
SOLVED
gogol1996 said:
No difference. Just kernel (the brain of your device) will be different
Click to expand...
Click to collapse
aaahhh... i see , thank you for the informations... next thing to do now is choosing the best rom with the best optimization and smoothest and most complete one...maybe ill just make a new thread... this one is closed ! PROBLEM SOLVED!
Hello guys.
Just as the topic says, i have tried every single guide on this forum both for Windows and Linux and i still cant root my note.
So please help me iam stuck on gb 2.3.6 with a LC1 kernel.
I have ec3 recovery but can't flash anything in there just get a error message saying cant verfiy file.
So please guys i really need your help.
And i've tried Superoneclick and oneclick and .bat files but i dosent work.
JB_ said:
Hello guys.
Just as the topic says, i have tried every single guide on this forum both for Windows and Linux and i still cant root my note.
So please help me iam stuck on gb 2.3.6 with a LC1 kernel.
I have ec3 recovery but can't flash anything in there just get a error message saying cant verfiy file.
So please guys i really need your help.
And i've tried Superoneclick and oneclick and .bat files but i dosent work.
Click to expand...
Click to collapse
That is because 2.3.6 is not direct rootable. You need to follow Dr. Ketan's guide to achieve root...
http://forum.xda-developers.com/showthread.php?t=1329360
glevitan said:
That is because 2.3.6 is not direct rootable. You need to follow Dr. Ketan's guide to achieve root...
http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
Well i have followed every method there except the one with mobile odin and the one that you are suppose to download a new kernel but i cant find mine there so thats why i havent tried it. Can you tell me wich kernel i should use for LC1?
JB_ said:
Well i have followed every method there except the one with mobile odin and the one that you are suppose to download a new kernel but i cant find mine there so thats why i havent tried it. Can you tell me wich kernel i should use for LC1?
Click to expand...
Click to collapse
This what you need to follow:
http://forum.xda-developers.com/showpost.php?p=29756030&postcount=2
You have to flash a pre rooted firmware in ODIN PC and the from there you can flash your current firmware with a CF-Kernel with Mobile Odin your kernel is listed in there. Just read carefully.
glevitan said:
This what you need to follow:
http://forum.xda-developers.com/showpost.php?p=29756030&postcount=2
You have to flash a pre rooted firmware in ODIN PC and the from there you can flash your current firmware with a CF-Kernel with Mobile Odin your kernel is listed in there. Just read carefully.
Click to expand...
Click to collapse
Ok after i've done step 1 do i need to do step 2 and flash a newer gb rom ? or can i download exampel a 4.2.2 rom and flash it directly ?
JB_ said:
Ok after i've done step 1 do i need to do step 2 and flash a newer gb rom ? or can i download exampel a 4.2.2 rom and flash it directly ?
Click to expand...
Click to collapse
If your plan is to update to JB you can do that straight foward and then root by flashing philz kernel. That is way easy.
Thanks guys for everything!
Sent from my GT-N7000 using xda app-developers app