[Q] Recovery boots to clockwork - Captivate Q&A, Help & Troubleshooting

I will be happy to explain the entire opus of how I got here if someone thinks it's relevant, but the short story is, I had 2.1, I upgraded to 2.2, successfully rooted, installed clockwork mod, soft-bricked my phone by using adb to install the signed packages fixes for the 3e recovery menu, and restored my phone to base 2.1 by using odin 3 one-click downloader.
So now, back on (theoretically) 2.1, I follow the instructions for one-click downloader and two things happen (or don't happen, as the case may be). Yes, USB debugging is enabled.
-One-click doesn't boot my phone.
-When I manually boot it into recovery mode (2e) and select reinstall packages, it brings up the clockwork recovery menu.
I have NOT re-install clockwork mod after odin-restoring my phone. While I'm newish to this phone and rooting, I am NOT a tech noob, and I've reviewed the forums for the answer. Appreciate any help.
Thanks

Are you sure you're holding both volume buttons while plugging the USB in? And you have ODIN open before doing so? And also I think your clockwork recovery is just a file named update.zip on your internal SD card. Check if its there, if you don't want it anymore delete it and when you select reinstall packages you won't boot into clockwork.
I wasn't sure what you were asking but I think that suits it.
Sent from my SGH-I897 using XDA App

As usual, I beat my head against a wall for days, post a message for help, then solve my own problem within 5 minutes.
For reasons I don't understand, the clockwork update.zip was stuck on the sdcard, and the one-click root was not overwriting or telling me it was failing to overwrite it. So everytime i was trying to install root, I was just re-installing clockwork.
So now, I guess it's back to downloading clockwork mod. Sorry for the interruption.

bradleyG said:
Are you sure you're holding both volume buttons while plugging the USB in? And you have ODIN open before doing so? And also I think your clockwork recovery is just a file named update.zip on your internal SD card. Check if its there, if you don't want it anymore delete it and when you select reinstall packages you won't boot into clockwork.
I wasn't sure what you were asking but I think that suits it.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Close. I was doing the download and the odin reset properly. I guess I was assuming it would clear the update.zip off my sdcard. Bad assumption. I finally decided to check the contents of each and realized what happened.

Badger58 said:
As usual, I beat my head against a wall for days, post a message for help, then solve my own problem within 5 minutes.
For reasons I don't understand, the clockwork update.zip was stuck on the sdcard, and the one-click root was not overwriting or telling me it was failing to overwrite it. So everytime i was trying to install root, I was just re-installing clockwork.
So now, I guess it's back to downloading clockwork mod. Sorry for the interruption.
Click to expand...
Click to collapse
use SUPERONECLICK to root instead

Related

[FIX] Enable download mode by force adb push update.zip without permission

MY Phone Condition:
My phone was previously install with voodoo rom and use clockwork recovery to restore to my stock rom that i backup and it crash half way.
My phone was hardware lock this mean no matter how i press the volume and power button , i will never get into download mode. non of the method posted work !
My phone cannot use "adb reboot download" because there is no OS and it was stuck in the recovery loop.
It does not have clockwork recovery because i formatted my internal sdcard
If i do have clockwork recovery and i use restore image or install new from zip , i still stuck in the recovery mode after reboot several times.
My phone does not mount to internal sdcard because i don't even know what i did on this part.
I believe i screw up my partition of the phone.
DO IT AT YOUR OWN RISK.
You need the Samsung USB driver and you can get it from Here
http://forum.xda-developers.com/showthread.php?t=728929
First Part
1. Download update.zip from the link below. This was post by another member.
The post is here http://forum.xda-developers.com/showthread.php?t=804305
2. Place the update.zip in tools folder so you can push it into your phone by using adb command
3. Plug usb into the phone and your phone should be on the Android system recovery <2e>
4. Use your volume button to select reinstall package, don't press power button yet.
5. constant "adb push update.zip /sdcard" from computer , you will get permission denied.
6. While you are constantly pushing the adb command from computer. press the power button on the phone so it install update.zip from sdcard.
7. This is the part where it force adb push into sdcard without permission
8. once the update.zip install completed. unplug the usb cable from the phone and take the battery out.
9. put the battery back to the phone then press on both volume button.
10. While holding both volume button , plug in your usb cable and it will boot to download screen.
If you need use Odin to flash your phone to original stock rom. Go to the Second Part
Second Part:
If you get black screen with only 4 light on the bottom after flashing from Odin.
Follow http://forum.xda-developers.com/showthread.php?t=728698
There should be T959-PDA.tar,T959-CSC.tar and T959-Phone.tar within the package.
Check "Re-Partition" , "Auto Reboot" and "F.Reset Time" check box. Use the PIT 0512 version. Use "PDA", "PHONE" and "CSC" from the link above.
After flashing with Odin, you will loose the download mode. repeat the first part and you are good to go.
Here is the link on rooting the phone
http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_Samsung_Galaxy_S_(Vibrant)
If your phone is hardware locked, how are you able to get into recovery? Hardware locked phone means no recovery and download mode.
Sent from my SGH-T959 using XDA App
mr2t32 said:
If your phone is hardware locked, how are you able to get into recovery? Hardware locked phone means no recovery and download mode.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
my hardware lock mean cannot use the button method to get into download mode and using adb reboot download does not help too.
Im pretty sure hardware lock does not mean no recovery. Just no button download mode
Sent from my SGH-T959 using XDA App
you saved my life man. thank you so much. this was the only thing that worked, after days of frustration
No, it means both.
Sent from my SGH-T959 using XDA App
muncknr said:
you saved my life man. thank you so much. this was the only thing that worked, after days of frustration
Click to expand...
Click to collapse
i was about to give up. i was trying to push update.zip and do adb reboot download left and right and no luck untill i found this method. It took me a week to figure it out
wildklymr said:
No, it means both.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
my recovery was working because i was stuck in the a loop. ya , this update.zip pretty much do both download mode and recovery mode.
What the point of this? Does the other thread not cover this??
Masterâ„¢ said:
What the point of this? Does the other thread not cover this??
Click to expand...
Click to collapse
Are you asking or you are insulting ?
jaex said:
Are you asking or you are insulting ?
Click to expand...
Click to collapse
probably asking. Considering there is another thread on the same topic that has been on the front page for over a week now, with several pages of replies.
http://forum.xda-developers.com/showthread.php?t=804305
EDIT: So you were bricked and hardware locked and got yourself out of it? If thats the case then yets its different than that thread and why didn't you just come out and say it?
nermie said:
probably asking. Considering there is another thread on the same topic that has been on the front page for over a week now, with several pages of replies.
http://forum.xda-developers.com/showthread.php?t=804305
EDIT: So you were bricked and hardware locked and got yourself out of it? If thats the case then yets its different than that thread and why didn't you just come out and say it?
Click to expand...
Click to collapse
You figure it out after all. I already stated the condition of my phone ! My phone was pretty bricked at that point. There is way for me to push any files into the phone because i don't have permission and my phone will not go to download mode by using the volume button. It just stuck at recovery mode.
There are guide out there teach you to use "adb push download". This method only work if you are in your phone and you turn on debug mode. My phone crash at the clockwork recovery bootloader. Then i formated my internal sdcard that hold the clockwork. next i push a stock update.zip that does not have su and busybox so i lost the capability to push anything into the phone.
no download mode , no permission, no sdcard --> You tell me how can i use the method that post few week ago ?
muncknr said:
you saved my life man. thank you so much. this was the only thing that worked, after days of frustration
Click to expand...
Click to collapse
Thank You
Thank ! You save my phone !
unfortunately, i was one of those careless people to brick my phone via Voodoo.
Firstly, i tried to "FLASH" the disable_voodoo zip file via Clockwork, i put it in root, and never created any folders. i knew i had to disable voodoo before flashing but my steps were wrong.
sadly enough, my phone was also HW locked, so i got it exchanged. now im not using voodoo YET and i my new vibrant can handle OC and has the recovery/download mode via buttons.
atlaswingpasaway said:
unfortunately, i was one of those careless people to brick my phone via Voodoo.
Firstly, i tried to "FLASH" the disable_voodoo zip file via Clockwork, i put it in root, and never created any folders. i knew i had to disable voodoo before flashing but my steps were wrong.
sadly enough, my phone was also HW locked, so i got it exchanged. now im not using voodoo YET and i my new vibrant can handle OC and has the recovery/download mode via buttons.
Click to expand...
Click to collapse
i use shell to create the file that disable voodoo. after disable voodoo , i was able to do restore and install new rom unfortunately after restore or install new rom , it still reboot into recovery.
I also forgot to disable voodoo, and this was before there were fix instructions posted. So i basically effed up my phone to the point of being stuck in the samsung recovery loop, no hardware download mode, no clockwork recovery, no update.zp, no adb download.
I really thought I had completely bricked my phone, I tried this just out of desperation and what do you know, push update.zip over and over and click and it goes through, which allowed me to get into download mode.
muncknr said:
I also forgot to disable voodoo, and this was before there were fix instructions posted. So i basically effed up my phone to the point of being stuck in the samsung recovery loop, no hardware download mode, no clockwork recovery, no update.zp, no adb download.
I really thought I had completely bricked my phone, I tried this just out of desperation and what do you know, push update.zip over and over and click and it goes through, which allowed me to get into download mode.
Click to expand...
Click to collapse
nice , you just have to re-root and install the new rom again , if it brick again , just use this method and you are good again.many of us forgot to disable the voodoo before we restore or install new rom and this crashes the phone.
Need some help really bad
Ok so I have a similar situation as you did (OP), only mine is a bit worse... In my irrational "in the moment" fear of the situation, I used adb reboot recovery to get into recovery mode (HW locked phone) and I did the option that deletes all the **** on the phone and restores the phone to its original format (I think it reinstalled the OS or something, because it looks brand new). So now, whenever I boot up, it does the annoying black screen with the 4 glowing buttons thing for a while, and then eventually the OS actually shows up on the screen. Then it does "scanning media" thing over and over again, but thats not the main problem. I figured, hey this isnt so bad atleast I found your thread and would be able to use your method to help restore my phone... the problem is that somehow my "settings" button is totally gone from the app menu, and I cant get it into debug mode, so I cant use either adb or your method or ANYTHING!! My phone is practically bricked as I cant do anything because its constantly laggy and turns back to the black screen thing, and then when it is showing the homescreen I cant do **** because even swiping to another screen takes like 5 minutes to do cause its so laggy. So basically I ****ed up, and I really need some help.. Im kinda a noob at this whole thing and im really outa options as far as I can tell.. does anyone know what I can do to repair my phone? Thanks!

[Q] Question to All...

Hi guys,
First post here, but been actively watching and gaining knowledge as I go..
I first want to say Thank you to all the producers of these new ROM's we have available!!!!
Now I wanted to say that my Captivate recently "Bricked". It's ok.
I had Root(SU perm.) Titanium backup, Rom Manager w/Clockwork mod & OCLF too.
My problem occured yesterday(Oct. 28th) - A day that will go down in history!
I was running Unhelpful's Cog Rom 2.1 and decided to upgrade to the Cog 2.2 beta 9 ROM.... After i did everything, it went well.... I noticed when I turned my phone back on that it wasnt recognizing my internal memory or even external.
I tried rebooting back into recovery and tried to reinstall ROm manager or any app and it kept saying, "not enough space". So I tried to reboot recovery and install a earlier version and nothing worked. Now it just boot loops into recovery screen and Clockwork mod seems to be gone!!
Oh well no harm as it is under warranty and my new one will arrive by Monday...So my question to all here is - When I receive my new phone, can I Root? Reinstall my Titanium Backup and my Rom Manager and Clockwork....Then put the Cognition file 2.2 Beta 9.1.2 (or 3) on my internal SD and watch the maqgic??? Or do I have to do anything else...? I should backup my stock ROM to where?? Internal & External card?
Thanks guys,
Mike De.
MortgMan said:
Hi guys,
First post here, but been actively watching and gaining knowledge as I go..
I first want to say Thank you to all the producers of these new ROM's we have available!!!!
Now I wanted to say that my Captivate recently "Bricked". It's ok.
I had Root(SU perm.) Titanium backup, Rom Manager w/Clockwork mod & OCLF too.
My problem occured yesterday(Oct. 28th) - A day that will go down in history!
I was running Unhelpful's Cog Rom 2.1 and decided to upgrade to the Cog 2.2 beta 9 ROM.... After i did everything, it went well.... I noticed when I turned my phone back on that it wasnt recognizing my internal memory or even external.
I tried rebooting back into recovery and tried to reinstall ROm manager or any app and it kept saying, "not enough space". So I tried to reboot recovery and install a earlier version and nothing worked. Now it just boot loops into recovery screen and Clockwork mod seems to be gone!!
Oh well no harm as it is under warranty and my new one will arrive by Monday...So my question to all here is - When I receive my new phone, can I Root? Reinstall my Titanium Backup and my Rom Manager and Clockwork....Then put the Cognition file 2.2 Beta 9.1.2 (or 3) on my internal SD and watch the maqgic??? Or do I have to do anything else...? I should backup my stock ROM to where?? Internal & External card?
Thanks guys,
Mike De.
Click to expand...
Click to collapse
Questions don't go in the development section dude. did you not see the Q&A section? also did you try using odin to flash android? that worked for me when i had problems like that. http://forum.xda-developers.com/showthread.php?t=731989
sorry...
also that method is not working.. I think my phone has been deemed a paper-weight
MortgMan said:
sorry...
also that method is not working.. I think my phone has been deemed a paper-weight
Click to expand...
Click to collapse
It just won't go into download mode? try taking out the battery and sim and doing it again.
EDIT: and just leave only the battery in when you try it.
open odin 1 click stock restore on puter, phone off, hold down volume up and down then while holding plug in usb, should throw u into download mode and and odin
take the sim out, the external sd( if any ), the battery...now connect it via usb...now hold down the volume buttons( both of em) and now put the battery in....it should go in download mode
You are telling me that this method doesn't work?
http://forum.xda-developers.com/showthread.php?t=775911
Chief Beefalo said:
You are telling me that this method doesn't work?
http://forum.xda-developers.com/showthread.php?t=775911
Click to expand...
Click to collapse
*sigh* what do you have NO idea what's been going on in this world? That's right, that method, or any other method, absolutely does NOT work on batch 1008 Captivates. Don't act so amazed like its a new thing.
DownLoad mode
sportedwood said:
open odin 1 click stock restore on puter, phone off, hold down volume up and down then while holding plug in usb, should throw u into download mode and and odin
Click to expand...
Click to collapse
Thanks, but I did this and it did go into Download mode but not recognized by computer... ODIN opens but nothing happens... nothing in any of the boxes and start does nothing.
Somehow my phone is not visible to PC...If I could get it visible again or even go back to stock, I wouldnt have a problem.
As I said previously, when i re-install packages in recovery it does NOT take me into Clockwork Mod recovery.
So, yes i can get into Download mode on phone but not PC. Just constant boot loop into Samsung recovery..............Now any takers want to try to come up with solution?

Rooting Samsung Galaxy S 1900m Canada

my lack of knowledge/terminology been sitting here for hours trying to root my phone with no luck. I know it is doable through ADB but I tried installing it and it didnt work. I tried the one click root method too but when it gets to the "repackage files" step, I just plain don't have the option on the menu, here are the options
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
format internal sd card
when I press the update.zip it says unverifiable whatever. ( not in the mood to reboot it just for this)
is there anything on here that actually is just straight up for a beginner?
I am completely confused past this point.
Try using Superoneclick v1.5.5
Sent from my GT-I9000 using XDA App
You're on jl2 right?
Problem is: Recovery 3e is verifiing signature on update.zip file, you'll have to get on Recovery 2e in order to root from an unsigned update.zip.
you can probably use the search fonction to find the "how To" easely. It took me less than 10 minutes gettings mine rooted.
Personnaly, all I did is flash another kernel with Odin
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
K So I upgraded to the kernel you told me to and it booted up normally I have my market back and the superuser permissions but when I press superuser permissions it doesnt show anything other than settings which only have two trivial options.
what do I do from here.
butterbladez said:
K So I upgraded to the kernel you told me to and it booted up normally I have my market back and the superuser permissions but when I press superuser permissions it doesnt show anything other than settings which only have two trivial options.
what do I do from here.
Click to expand...
Click to collapse
That is fine if you have the superuser app show up, that means it's rooted. You won't see anything in there until an app needs superuser permission. Download titanium backup when you first boot it you well be prompted for superuser access click allow then next time you go into superuser app you will draw titanium backup in the list.
Sent from my GT-I9000 using XDA App
I love you more than anything.
How do I start adding paid apps and stuff for free? possible at all? I downloaded that and busybox
Bump i really need help im not the smartest
bump ive been trying to do this for 5 days now
super one click is the easiest way of all
make sure it is in USB Debug Mode
and that it is connected to a computer that can see your phone in ADB mode
make sure the USB drivers are installed for the Kies and Android SDK
+1 for SuperOneClick
I'm on JL2 i9000m too and rooted with SuperOneClick.
Sup guys, I've got the Bell I9000M in Canada aswell, bought it less than a month ago, and I am not on JL2.
I, instead am on JK4.
What do I have to do to root my JK4 I9000M?
Any replies would be helpful. In the end, I would love to be able to get Darkys Rom on my phone, but no one responds in that thread nor does anyone really know what to do with my phone version.
If anyone could help me out, that would be great. Thanks
Help pls
OK so to start off i had this samsung galaxy s GT-I9000M from bell and i was trying to upgrade it so that my sister could use a newer version of android and not the boring v.2 . ANYWAYS I rooted it then reboot it and it was stuck at the splash screen so i thought it was stuck and i searched for a way to fix it which was to get the PDA PHONE CSC and PIT files and put them in odin and hope for the best. well that turned out horribly wrong. i ended up getting the phone stuck in some boot loop where it flashes a white screen and turns of and it does this constantly :crying::crying::crying: I can still get to download mode but not recovery mode for some reason...... PLS HALP

Any method to root captivate 2.2 no usb needed

Is there anyway to root my 2.2 captivate without a usb cable
Sent from my SGH-I897 using XDA App
Yes.
1. Go to this url http://forum.xda-developers.com/showthread.php?t=924404&highlight=wirelessly and follow the link in that and instructions from the website listed there.
2. Go to http://forum.xda-developers.com/showthread.php?t=884364 and in teh very first post, under Download section Download the root file this will download a file called root.zip. Do not unzip it.
3. once downloaded, rename the file from root.zip to update.zip, place that file in the root of your sdcard (if you have followed the instructions in step 1, you will know where that is and how to transfer the file wirelessly).
4. Once the update.zip file has been copied over, turn off your phone.
5. Press and hold both volume buttons and while holding them down press and hold the power button (basically press and hold all three buttons and dont let them go).
6. Press and hold till AT&T log screen comes back up for a second time. Let the buttons go.
7. You will now be in recovery mood (a blue font, black background screen).
8. Using your volume down button highlight "re-install packages".
9. press the power button to select.
10. Let the process continue and let the phone reboot on its own.
11. Once the phone is booted, check your app drawer, you should have an app called "superuser".
12. Thats it, you are rooted and no USB needed.
I tried the method already but it is not letting reistall the packages.i rooted before using a similar mathod.n update from eclair to froyo im using perception 10.1 bit i try installing a dif rom and thats when i got unrooted cause i have the super user app but i cant get the root acces
Sent from my SGH-I897 using XDA App
If you are on a 2.2 rom and trying to flash another rom then you should flash back to stock eclair before flashing another. So you will odin back to stock, then root then install clock work recovery and then flash via cwm if your rom presents that option.
Sent from my SAMSUNG-SGH-I897 using XDA App
Do you know a method to use odin cause i tried it and it looks like the computer does not recognize my phone
Sent from my SGH-I897 using XDA App
Thanxs a lot i used odin and now im rooted and enjoying paragon rom
Sent from my SAMSUNG-SGH-I897 using XDA App
Glad I could help... I have Paragon.. but the calendar notification is a problem and the battery doesnt seem to be working properly for me... I need to flash something else... enjoy if it works for you!
Just to double check...
I'm running Froyo on my Samsung Captivate. (I used the official At&t update) I want to root my phone now but for some reason I have issues with my USB and no computer will recognize my phone.
If I have this version of Froyo do I need to go back to Eclair or can I just follow these instructions and be able to root my phone?
fughedaboudit said:
I'm running Froyo on my Samsung Captivate. (I used the official At&t update) I want to root my phone now but for some reason I have issues with my USB and no computer will recognize my phone.
If I have this version of Froyo do I need to go back to Eclair or can I just follow these instructions and be able to root my phone?
Click to expand...
Click to collapse
Check to make sure you have the right drivers. And this version only works for eclair. But you can update to stock froyo and keep root.
*so easy a caveman can do it*
is there dirt inside the usb? are you using the official USB cable that came with it? i have a cable from my bluetooth headset that only supplies power but data wont work through that one cable. I cant use that cable to flash or exchange data.
you can use the 3e fix in my sig to fix the stock recovery to not need signature verrifacation for update.zip files. then you can find a pre-rooted/cwm 2.2 (froyo) kernel cwm.zip (or a whole custom rom) . rename to update.zip, boot into recovery, apply update.zip
oh crap no usb, no 3e fix... damn.
TRusselo said:
is there dirt inside the usb? are you using the official USB cable that came with it? i have a cable from my bluetooth headset that only supplies power but data wont work through that one cable. I cant use that cable to flash or exchange data.
you can use the 3e fix in my sig to fix the stock recovery to not need signature verrifacation for update.zip files. then you can find a pre-rooted/cwm 2.2 (froyo) kernel cwm.zip (or a whole custom rom) . rename to update.zip, boot into recovery, apply update.zip
Click to expand...
Click to collapse
I don't think it's my usb. I think it's actually my internal sd card. When i tried to mount it, it would sometimes get recognized and sometimes it wouldn't. I tried reformatting my sd card (it worked once but then stopped working no matter how many times i reformatted it.) I took it to the AT&T store and got my phone replaced. Then i had the same problem all over again.
I just want to enable sideloading but i guess i'll try to bug AT&T about getting me that update instead of trying to root. Thanks for the help!

Flashing problems.....is this the right place to ask?

So I put Andromeda on my phone a few weeks ago. It went fine, no problems, liked it. So I went to put it on my wife's phone. I was able to get it rooted. Into download mode, and Odin on it. But I couldn't get it into recovery. Vol up/dn/pwr just booted the phone normally. Vol up/dn does work to change the volume settings normally so it's not a bad button. So I thought, I had mine on stock 2.2 when I did everything. So I hooked hers up to Kies and put 2.2 on it. Rooted it. Now I cant' get the phone into download or recovery mode. Vol up/dn, plug in usb not working, it just goes into battery charge mode. We got our phones the same time so they're both same hardware rev. Any ideas?
TIA,
Scott
This should probably go in the q&a section. But did you try the three button fix. Search the forums for it.
Sent from my GT-I9000 using XDA App
slevy951 said:
So I put Andromeda on my phone a few weeks ago. It went fine, no problems, liked it. So I went to put it on my wife's phone. I was able to get it rooted. Into download mode, and Odin on it. But I couldn't get it into recovery. Vol up/dn/pwr just booted the phone normally. Vol up/dn does work to change the volume settings normally so it's not a bad button. So I thought, I had mine on stock 2.2 when I did everything. So I hooked hers up to Kies and put 2.2 on it. Rooted it. Now I cant' get the phone into download or recovery mode. Vol up/dn, plug in usb not working, it just goes into battery charge mode. We got our phones the same time so they're both same hardware rev. Any ideas?
TIA,
Scott
Click to expand...
Click to collapse
I donot know whats causing the problem (dont have the knowledge) but i can suggest buying a usb jig (costs only 8$ including shipping) which is pretty cheap and useful considering if you change roms frequently.
U just plug in the usb and the phone goes into download mode and you good to go.
If u wana buy just google mobile tech videos and buy it from their website (the guy john selling it is a rom reviwer on xda so its a safe site to buy) or on ebay. hope this helps
Sent from my GT-I9000 using XDA App
so its back to stock 2.2 ?
try using rom manager to boot into recovery.
note with 2.2 stock it has 3e recovery. to install cwm you must root and replace with 3e hacked recovery
use rom manager to boot into recovery. from cwm you can tell the phone to reboot into download.
or if you still have a custom rom, you use the advanced power menu (power button menu) to select download or recovery. no button tricks needed.
Trusselo said:
so its back to stock 2.2 ?
try using rom manager to boot into recovery.
note with 2.2 stock it has 3e recovery. to install cwm you must root and replace with 3e hacked recovery
use rom manager to boot into recovery. from cwm you can tell the phone to reboot into download.
or if you still have a custom rom, you use the advanced power menu (power button menu) to select download or recovery. no button tricks needed.
Click to expand...
Click to collapse
3e recovery can be a bit of a pain, it is easier to Odin one click to 2.1 with the 3 button fix and go on with that.
The other solution would be to go with Team Komin's Ursa Minor kernel. There's a video posted on the forum (and youtube) by AdamOutler (I think that's his name) on how to do it - very clear and easy to follow.
@ Trusselo, I don't mean to go against your suggestion. I went through the 3e recovery myself and it can be a pain for a newbie so I'm giving him/them a second opinion/suggestion
the 3e instructions are written like crap. i asked the OP to change it but no.,...
its actually super easy if you have root explorer. (google *cough cough*)
use root explorer to mount RW then drop the file over the old one.
done
@ bwolf_56 Oh and no offece to you but he cant get into download mode to flash the Ursa kernel from odin... so...
Trusselo said:
the 3e instructions are written like crap.
its actually super easy.
use root explorer to mount RW then drop the file over the old one.
done
Click to expand...
Click to collapse
Yup, they're. I had to go through the replies to find the actual good way to do it and even then it wasn't so clear.
Once you know how root explorer works, then go ahead and use the 3e recovery but I wouldn't suggest that to some1 new to all of this I mean, you don't wanna replace the wrong file either (or even worst, delete system files).
Either way, It's up to you OP - both solution works great. I hope we helped
EDIT: lolol - I guess w/o dl mode, my way doesn't work so well You can try one of the 3 ways to get in dl mode, the one that works best for me is:
1. Turn off phone, remove battery, sim card
2. hold down both volume button
3. plug the usb in (while holding both volume still)
4. A nice triangle with a Android holding a shovel should show up
If that doesn't work. My apologize and go ahead with the 3e recovery that Trusselo suggested. You can pm me for clear instruction (and probably Trusselo as well)
Thanks all for suggestions....
so its back to stock 2.2 ?
Yes. And I believe I got it rooted with Superoneclick because it has superuser on it.
it is easier to Odin one click to 2.1 with the 3 button fix and go on with that
Exactly what I'm trying to do. But can't get into download mode or 3-button recovery mode. Neither are working. I didn't try the abd server method. Looked a bit scary, but may try it this eve.
use root explorer to mount RW then drop the file over the old one
Forgive me. Root explorer from market, right? 'mount RW' ? Drop what file over what old file?
use rom manager to boot into recovery. from cwm you can tell the phone to reboot into download.
So mount the SD and copy cwm to it and rename to update.zip. Get Rom manager from market and that will get me to cwm to get to download mode to use Odin to go back to 2.1. Then root again and install rom manager again to get into recovery to load the Andromeda? Is that close?
odin one click isnt 3 button fix
3 button fix is a flash you use with the NON one click odin
root explorer is from the market... (can also be *found* on google [for testing purposes])
3e recovery fix is a file you must replace. xda search it!
rom manager will download and copy the update.zip for you! so you dont need to do it frist. its the first button in the app! Rom manager also has a button. "boot into recovery" use it to boot into recovery...
so flash to 2.1 with 3button fix (regular odin) 2.1 no 3e recovery forget that.
root
install rom manager to get cwm
cwm flash your new rom
delete rom manager.
sounds like you need to do more searching and reading...
Trusselo said:
odin one click isnt 3 button fix
3 button fix is a flash you use with the NON one click odin
root explorer is from the market... (can also be *found* on google [for testing purposes])
3e recovery fix is a file you must replace. xda search it!
rom manager will download and copy the update.zip for you! so you dont need to do it frist. its the first button in the app! Rom manager also has a button. "boot into recovery" use it to boot into recovery...
so flash to 2.1 with 3button fix (regular odin) 2.1 no 3e recovery forget that.
root
install rom manager to get cwm
cwm flash your new rom
delete rom manager.
sounds like you need to do more searching and reading...
Click to expand...
Click to collapse
Little question here, why would you delete ROM manager after?
@ OP - Please read some more before trying what has been suggested here. Trusselo gave you a good rundown which isn't too hard to do (there are also vid on it). A little reading could save your android, that coming from a guy that is usually hasty to act (notice how I bricked my 1st cappy )
most custom roms have CWM built into the kernel. rom manager and the update.zip with cwm are no longer needed with one of the cwm kernels.
and custom roms usually have the advanced power menu. boot to recovery/download easy peisy
rom manager only confuses people if you have both. took me a couple weeks to learn that..
bricked my first one too, kinda, (coulda fixed it) but couldn't wait and had it only days, easy exchange with in-store dummies.. lol
So I looked at Rom Manager on my phone.
Since the wife's on stock 2.2 and rooted. Seems that I can just d/l Rom Manager on her's. Copy the new rom to the SD. And use Rom Manager to flash it.
Can it be that simple?
And yes, I've been doing alot of reading. But, some of you guys talk a different language.....
Thanks again.
Scott
For future reference, this is not Dev-related and should have been posted in the related sticky in Q&A.
Miami_Son said:
For future reference, this is not Dev-related and should have been posted in the related sticky in Q&A.
Click to expand...
Click to collapse
Ya, wasn't real sure where to put it. Apologies. If you want to move it.....
Scott
Moved to proper forum.
slevy951 said:
So I looked at Rom Manager on my phone.
Since the wife's on stock 2.2 and rooted. Seems that I can just d/l Rom Manager on her's. Copy the new rom to the SD. And use Rom Manager to flash it.
Can it be that simple?
And yes, I've been doing alot of reading. But, some of you guys talk a different language.....
Thanks again.
Scott
Click to expand...
Click to collapse
No, it's not that simple, on 2.2 with the 3e recovery you will get a signing error when trying to flash and it won't work. Follow the suggestions and just use odin with the 3 button fix to get to 2.1
To get into download did you try removing battery from captivate, start Odin, plug USB cable to PC and captivate, hold both volume keys, and reinstall battery? On Stock that's the only way I can get into download. There is a thread on here with more detail but that's how I do it.
Sent from my SAMSUNG-SGH-I897 using XDA App
talbtimber said:
To get into download did you try removing battery from captivate, start Odin, plug USB cable to PC and captivate, hold both volume keys, and reinstall battery? On Stock that's the only way I can get into download. There is a thread on here with more detail but that's how I do it.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yep, tried that one.
Spent a couple hours on this last night. I isntalled Rom Manager. That will get the phone into recovery. But, since it's 3e, doesn't do me any good. Signature errors. No matter what I do, can't get the phone into download mode. Last night I even tried with adb. The phone just reboots normally with the adb reboot download command.
I know your gonna say there is the 3e fix, keep reading. I found it. But, really didn't understand it. And I don't want to brick the phone. I think the wife is going to be staying on stock 2.2 at this point. I don't know what else to do.
Thanks to all.
Scott
Try and make or buy a jig?
Buiding a JIG is quite simple and cheap, you should try it.
Also, you can pm me for 3e recovery. I'll give you a nice rundown - It's quite easy, just not well explained on the thread

Categories

Resources