Database Develop

Help with Recovery.img

I wanted to try Cyanogens new Rom when I bumped into snag on the first step.
I cant get in Recovery mode! I have done it befor to get root access but I dont know what happened. It always freezes at the Rogers Logo when I hold Home and push power.
I have very little knowledge of this stuff but Ive tried to install Cyans Pimped recovery.img but It keeps telling me cannot load recovery.img. I think I only tried through fastboot though, I have attempted to through adb shell but I'm not 100% how that works, so I assumed it failed.** Oh and I also Tried erasing my old Recovery Image, which was successful but didnt help anything
I have root access and I own a Canadian HTC Dream. I have Cupcake, Thanks for your help in advance ^^

Hi, it sounds like you erased the standard recovery image, but haven't sucsessfully flashed a new one, which is why the phone will have.
Try flashing it on your phone using the terminal. First grab "terminal emuator" or "Better Terminal".
Put the recovery image on the root of your SD card and name it recovery.img
Open terminal and type:
su <- when the prompt appears, choose always allow
flash_image recovery /sdcard/recovery.img
It's done when the cursor drops down to the next line. Turn the phone off and hopefully recovery will be working.

Hey thanks for the response but still having the same problem.
When I type su it always says Access Granted Courtesy of yada yada. Im assuming this isnt a problem. I flashed my recovery.img and it didnt give me a response. I guess it worked but yet, Still Freezes on Rogers Logo.
I found the Right Recovery.img for a Rogers Dream but now I cant seem to flash it into the Phone. When I type the cmd in Terminal It doesnt give me any errors. But when i go to Erase it in Fast boot it says the remote partition does not exist. Can anyone figure this one out? Im probably doing something small and stupid wrong but any help would be greatly appreciated.

Sounds like you have few different tutorials mixed up. You don't type cmd in terminal. cmd is Windows command to get into command prompt, from there you type your adb commands so if we assume that you placed your NEW recovery image in the root of you sd card and named it recovery.img you would type
From your computer
Window's key +r
cmd
adb shell
flash_image recovery /sdcard/recovery.img
reboot recovery
OR
From terminal
su
flash_image recovery /sdcard/recovery.img
and wait for # to appear, then type
reboot recovery and see what happens
There's a way to do it from fast boot screen as well, you can find a tut in developement section.
Good luck

Hey thanks, That does clear a few things up. I just ended up resetting my phone and it was a breeze from there. Thanks for your help.

[Q] Stuck at Fastboot usb screen

I installed the new zen2.2 rom today and had a working clockwork recovery. Here is where I went stupid, I downloaded the kernel update but rather than running it via update.zip I flashed it using flash_image recovery via adb shell.
Now my phone comes up to fastboot usb and never goes any further, been waiting hours! I have tried booting into fastboot/hboot and it does nothing. I have booted to hboot before successfully but now nothing.
If I run adb devices it shows no devices. If I run fastboot devices it does show my device.
Whats next?

If you cant get into fastboot and you cant get into recovery then you m ight have bricked your phone. Did you try a hard reset?

How do you do a hard reset?
Here is a little more info. I believe it does actually get to fastboot usb as it says so on the top left of the screen and I can run fastboot commands but most commands say error. If I do fastboot devices it shows the device connected.
Little more info - when I try doing a back to basics RUU update it connects, shows the rom version, starts the update and then at about 88% every time, it goes right to a error [171] usb connection error. So its communicating but never finishes. Tried with the sprint RUU stock rom, another that was built by one of the devs in the Hero community and still both do the same.

I'm pretty sure you can flash a custom recovery from fastboot. Using something like fastboot flash xxx dont quote me on this but it sounds like you have a soft brick and you just need to get a recovery back on the phone. From there you can then flash and rom back on the phone. Do some research on flash a recovery from fastboot.

ASimmons said:
I'm pretty sure you can flash a custom recovery from fastboot. Using something like fastboot flash xxx dont quote me on this but it sounds like you have a soft brick and you just need to get a recovery back on the phone. From there you can then flash and rom back on the phone. Do some research on flash a recovery from fastboot.
Click to expand...
Click to collapse
Right, I also believe that if I could get a recovery back on the phone I would be good as gold! Here is the problem though. I have tried running "fastboot flash recovery [recovery.img]" but it gives me the below error. I have tried multiple key combination's to get into hboot but nothing works. If anyone has any other key combination's I could try please let me know!
Code:
D:\android-sdk-windows\tools>fastboot flash recovery recovery.img
sending 'recovery' (3720 KB)... FAILED (remote: not allow)
finished. total time: 0.001s

1st:The ONLY time you use flash_image recovery is when you are installing a recovery console, NOT a kernel
If you notice the kernel is in a signed .zip folder. When you use flash_image command it needs to be .img file
2nd: Put the recovery image on your sdcard
Put it in the tools folder of AndroidSDK and do
Code:
adb push recovery.img /sdcard
Now type in
Code:
$ adb shell
$ su
# flash_image recovery /sdcard/recovery.img

unCoRrUpTeD said:
1st:The ONLY time you use flash_image recovery is when you are installing a recovery console, NOT a kernel
If you notice the kernel is in a signed .zip folder. When you use flash_image command it needs to be .img file
2nd: Put the recovery image on your sdcard
Put it in the tools folder of AndroidSDK and do
Code:
adb push recovery.img /sdcard
Now type in
Code:
$ adb shell
$ su
# flash_image recovery /sdcard/recovery.img
Click to expand...
Click to collapse
Yeah I think he knows now not to flash kernels... atleast I hope so. +1 for your post.

unCoRrUpTeD said:
1st:The ONLY time you use flash_image recovery is when you are installing a recovery console, NOT a kernel
If you notice the kernel is in a signed .zip folder. When you use flash_image command it needs to be .img file
2nd: Put the recovery image on your sdcard
Put it in the tools folder of AndroidSDK and do
Code:
adb push recovery.img /sdcard
Click to expand...
Click to collapse
I am fully aware of how the how-to's and what not to do's. Like I said, it was a mistake, call it a bit of anxiety due to the new 2.2 rom that I was trying to get installed. I did it too quick and without much common sense .
Now type in
Code:
$ adb shell
$ su
# flash_image recovery /sdcard/recovery.img
Click to expand...
Click to collapse
For the second part, I am unable to do anything with adb as my computer does not see the phone. When running adb devices it is not listed. Only command that sees my phone is fastboot devices, but again I am unable to run anything aside from that due to previous error.

casualonejp said:
I am fully aware of how the how-to's and what not to do's. Like I said, it was a mistake, call it a bit of anxiety due to the new 2.2 rom that I was trying to get installed. I did it too quick and without much common sense .
For the second part, I am unable to do anything with adb as my computer does not see the phone. When running adb devices it is not listed. Only command that sees my phone is fastboot devices, but again I am unable to run anything aside from that due to previous error.
Click to expand...
Click to collapse
First do you have the eng spl, does your hoot say s (on)
Have you tried that command but point it to the sdcard? Also do you have any files on your sdcard like say a recovery.img or an update zip. If you don't you might need to manually move the file to it and try some of these commands
fastboot update /sdcard/<imagepackage>.zip [-w] -w will wipe the cache and the user/data
or your previous flash recovery but with the file pointing to the file on the sdcard
edit: sorry i dont think fastboot will see the sdcard but try anyways.

ASimmons said:
First do you have the eng spl, does your hoot say s (on)
Have you tried that command but point it to the sdcard? Also do you have any files on your sdcard like say a recovery.img or an update zip. If you don't you might need to manually move the file to it and try some of these commands
fastboot update /sdcard/<imagepackage>.zip [-w] -w will wipe the cache and the user/data
or your previous flash recovery but with the file pointing to the file on the sdcard
Click to expand...
Click to collapse
I will try the fastboot command right now. I am unable to get to hboot with any of the key combination I have tried, before I was able to. Only thing that always comes up is the HTC white screen with fastboot usb at the top left. Can't see what hboot version or anything else I have due to that limitation.

casualonejp said:
I will try the fastboot command right now. I am unable to get to hboot with any of the key combination I have tried, before I was able to. Only thing that always comes up is the HTC white screen with fastboot usb at the top left. Can't see what hboot version or anything else I have due to that limitation.
Click to expand...
Click to collapse
After reading a bit you should be able to do something like i described
- copy amon_ra image to yor sd
- flash_image recovery /sdcard/name-of-recovery.img
hopefully you have a way to copy the files to your sd card like say a microsd card converter and stick it in your comp. Or I have had to use a freaking camera once for my g1 after being in a similar situation.
edit: ok so maybe you wont be able to if you spl is in s-off mode.
if you can access your card and see if you have nadroids you could also try this
fastboot flash system /path/to/nandroid/system.img
fastboot flash boot /path/to/nandroid/boot.img
fastboot flash userdata /path/to/nandroid/userdata.img
fastboot reboot
hopefully you have these backed up on your puter to.

ASimmons said:
After reading a bit you should be able to do something like i described
- copy amon_ra image to yor sd
- flash_image recovery /sdcard/name-of-recovery.img
hopefully you have a way to copy the files to your sd card like say a microsd card converter and stick it in your comp. Or I have had to use a freaking camera once for my g1 after being in a similar situation.
edit: ok so maybe you wont be able to if you spl is in s-off mode.
if you can access your card and see if you have nadroids you could also try this
fastboot flash system /path/to/nandroid/system.fimg
fastboot flash boot /path/to/nandroid/boot.img
fastboot flash userdata /path/to/nandroid/userdata.img
fastboot reboot
hopefully you have these backed up on your puter to.
Click to expand...
Click to collapse
Negative on the fastboot commands. Also did have a nandroid but on old sdcard which died. I read that I could use anothers nandroid backup but I am currently trying to find one to test.
Tried doing the RUU method with stock/custom roms and it gets as far as seeing the image but when I click on "ok" to start the recovery, it goes to "waiting on bootloader" and then at 88% it errors to a 171 error stating usb connection error.

I would do some research its my understanding that you can't be bricked since you can get into spl. You should be able to put an .img file on your sd card and flash it. Sorry I can give you any more input.

ASimmons said:
I would do some research its my understanding that you can't be bricked since you can get into spl. You should be able to put an .img file on your sd card and flash it. Sorry I can give you any more input.
Click to expand...
Click to collapse
Ya I have been researching non stop all yesterday evening and today so far all day. I just cant get it to do anything. I will keep researching though. Thanks

Did you fix this yet?

Anyone figure this out yet...I have the same issue and haven't been able to resolve it yet. Still with a brick at this point!

Hey guys,if your stuck at fastboot(As I just was tonight), try in your CMD(if running Windows) fastboot reboot-bootloader or fastboot reboot to reboot as normal,I'll try to keep you updated to get through all this. I am at a loss right now but searching for answers first before i go about asking.
Answer to MY problem(maybe not yours): OK,I have come to the conclusion here tonight that I had a soft brick. What I did was remove the battery,put the battery back in,restarted the phone normally,then I ran the HTC Sprint Hero MR 2.27.651.6 on my computer(essentially restoring back to unrooted factory settings). This worked for me. I am totally refreshed and happy that my phone is ok and all. Yes I may have to go back and re-root but this only take me bout 20 minutes most to root and re-flash a CyanMod7 Nightly Rom. Hope my info can help out somebody!

[Q] Recovery Flashing Error

After I got my nexus back from HTC for a faulty power button, my nexus has been rooted via a replaced motherboard. Now I have already root my phone and unlocked the bootloader, however when I try to flash the recovery image I get
sending 'recovery' (4074 KB)... OKAY
writing 'recovery'... FAILED (remote: image update error)
Also I can somehow access recovery, and it looks as it should. However when I try to backup my rom it says "Run 'nandroid-moblie.sh' via adb!" and similar things when I try any other the other options. Could someone please help with this?

How are you trying to flash it? Fastboot is the best foolproof way to do flash the recovery. I have never really seen that error before, what recovery are you trying to flash?
Your nandroid error is most likely because the sdcard thinks it's still mounted, or is mounted. Also, I don't know if this still happens but make sure you only do a backup, not backup +ext if you don't have an ext partition on the sdcard.

he's obviously using fastboot...
Did you make sure recovery.img had the right MD5 hashes as amon_ra posted?

I have check the MD5 checksums, and they match up. Also, i am using fastboot to flash, and I am trying to flash RA-nexus v2.0.0. Are you suggesting that I remount the sd card to get it to flash the recovery image?

cajer said:
I have check the MD5 checksums, and they match up. Also, i am using fastboot to flash, and I am trying to flash RA-nexus v2.0.0. Are you suggesting that I remount the sd card to get it to flash the recovery image?
Click to expand...
Click to collapse
I would suggest you try in command line with the adb commands as follows:
adb shell
su
mount -o rw,remount /dev/block/mtdblock4 /system
cat /sdcard/flash_image > /system/bin/flash_image
chmod 775 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
rm /system/etc/install-recovery.sh
rm /system/recovery-from-boot.p
reboot recovery
You need flash_image for this, check the wiki for the file...don't forget to put the recovery in the root of the sdcard and rename it to recovery.img for convenience purpose

gravufo said:
I would suggest you try in command line with the adb commands as follows:
adb shell
su
mount -o rw,remount /dev/block/mtdblock4 /system
cat /sdcard/flash_image > /system/bin/flash_image
chmod 775 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
rm /system/etc/install-recovery.sh
rm /system/recovery-from-boot.p
reboot recovery
You need flash_image for this, check the wiki for the file...don't forget to put the recovery in the root of the sdcard and rename it to recovery.img for convenience purpose
Click to expand...
Click to collapse
What do I do with flash_image? Also this device came back stock with frg 83, which I am trying to flash the recovery on. When I type in adb shell, I get "error: device not found" even though I can see it through "fastboot devices".

cajer said:
What do I do with flash_image? Also this device came back stock with frg 83, which I am trying to flash the recovery on. When I type in adb shell, I get "error: device not found" even though I can see it through "fastboot devices".
Click to expand...
Click to collapse
flash image has to be placed in the root of your sd card as well as the recovery!
As for the adb shell, try enabling USB Debugging in Setting > Applications > Development
Make sure you're rooted too (use SuperOneClick if you're not already)

I can get through that string of commands until
rm /system/etc/install-recovery.sh
rm /system/recovery-from-boot.p
reboot recovery
Then it says "No such file or directory". I have already rooted, and both the flash_image and recovery file have been placed in the root directory of the sd card.

Well, after you did that string of commands, does the problem persist?
Also, do you have at least 400MB free on your SD card?

Well, I can't get
rm /system/etc/install-recovery.sh
rm /system/recovery-from-boot.p
reboot recovery
to work as it responds with "No such file or directory". Even if I go through after the errors, the recovery still gives 'nandroid-moblie.sh' via adb!" and similar messages. Do I need to find a way to put the file install-recovery.sh in my sd card root directory if so, where can I get it? In addition when I try to flash recovery with nexus one superboot I get "(remote: signature verify fail)" even though the MD5 sum matches up.
Yes I have over 5 gbs on the sd card.

rm = remove
The steps you are trying to perform with the 2 rm command is to remove the 2 files that automatically rewrite your recovery.
If you reboot without succeeding in removing these files, the recovery image you just flashed will be written over by the stock recovery...
Since you have rebooted, and are still having the problem, you need to do the whole list of commands again... be careful how you type...
Sent from my Nexus One using XDA App

Danger, it seems as I can't remove those two files as I get the error message "rm failed for /system/etc/install-recovery.sh, No such file or directory". Any ways to successfully remove them?

Sounds like the files aren't actually there then, unless you're making a typing error...
Did your recovery update after the last attempt? Did it look different, what is the recovery version that is listed on the recovery screen?
Sent from my Nexus One using XDA App

I have been flashing different themed recoveries to see if any data transfers, and the background changes. But as before the actions all say "Run 'nandroid-moblie.sh' via adb!" or something similar.

cajer said:
I have been flashing different themed recoveries to see if any data transfers, and the background changes. But as before the actions all say "Run 'nandroid-moblie.sh' via adb!" or something similar.
Click to expand...
Click to collapse
if the rm doesn't work it's fine.
But what about your flashing command? It simply works or outputs an error too?
When u flashed themed ones, did the background change?

The background did change when I flashed the themed ones, however it still outputs errors like "Run 'nandroid-moblie.sh' via adb!" when i try to run any of the options under recovery. The fastboot flashing command gives this "writing 'recovery'... FAILED (remote: image update error)" error.

cajer said:
The background did change when I flashed the themed ones, however it still outputs errors like "Run 'nandroid-moblie.sh' via adb!" when i try to run any of the options under recovery. The fastboot flashing command gives this "writing 'recovery'... FAILED (remote: image update error)" error.
Click to expand...
Click to collapse
When you try running a NAND backup or restore a previous NAND?
When restoring, the backup must be at the exact position where it was when you did it: /sdcard/nandroid/HT#####/BCD######

I was trying to backup my current image, and this happens with all other actions even the shut down action on the recovery page just with "Run 'reboot -p' via adb!"

lawl xD that seems useful...
well, that's extremely odd to be honest...uhm...I think you should try and contact amon_ra if possible...He knows the code of his recovery and might know what's wrong...
I really have no clue, sorry =\
PS: Have u tried clockworkmod recovery?

Alright I will try contacting amon_ra, and I will try clockwork tomorrow. I was going for amon_ra recovery to get Sense HD on it with sd partition. Thanks for the help though I learned more stuff about my phone.
EDIT: Wow, clockwork installed like a charm, and I didn't even have to do anything. I'm now a clockwork convert.

CMW boot loop problem - Please help

I have a rooted dell streak 7, flashed with clockwork mod recovery. today i went to download the over the air update t-mobile sent out for the dell streak 7 and the phone froze, when i reset it it loaded to clockwork mod and i can't get it to load the normal OS now. no matter how many times i reset it. I even went so far as to format the /system, /cache and all the others trying to get it to boot pass the CMW recovery screen and nothing works. any suggestions would be helpful.

i dont know if it will help if you format with stock recovery you might e stuck but if you can still get into adb shell then try this guide you have to search for files yourself
http://forum.xda-developers.com/showpost.php?p=12185475&postcount=76
read post carefully

CMW boot loop problem
Hey Guy,
I am having the same issue..when try too adb commad it return:
fail with error -1
please help

thanks for the reply. this is all very new for me, but, in general i can usually handle my own tech stuff.
so let me just ask a real basic question. if I can open ADB and send commands to the phone through a DOS prompt, then that would mean the ADB shell is working, is that correct?

No you have to type "adb shell" and see if that works
Sent from my Dell Streak 7 using XDA Premium App

thatruth132 said:
i dont know if it will help if you format with stock recovery you might e stuck but if you can still get into adb shell then try this guide you have to search for files yourself
http://forum.xda-developers.com/showpost.php?p=12185475&postcount=76
read post carefully
Click to expand...
Click to collapse
Hi I am having the same issue..........but not working...... CMW recovery screen and nothing works. any suggestions would be helpful.

CWM boot loop problem
that is correct I abble to see device through adb....I typed adb shell and get a #...I type the command above and it return fail error....
Should have the boot.img and recovery img on my external sd card or internal sd card

Sdcard2
Sent from my Dell Streak 7 using XDA Premium App

Thank sooo much for help...I think I missing the highlighted steps below
this guide is for those who still have Clockwork Mod Recovery still on device you can thank bogdi1988 for his work and orginal guide here :
http://forum.xda-developers.com/show...5&postcount=76
BUT THIS MAY WORK FOR OTHERS IF YOU KNOW HOW TO MOUNT SYSTEM AND DATA AND THOSE THINGS FROM ADB
but to simplify I did this :
stock images
recovery.img
http://dl.dropbox.com/u/2252176/recovery.img
boot.img
http://dl.dropbox.com/u/2252176/boot.img
Once in recovery mount everything you can system , data , cache , everyrthing besides sd card
then go into command prompt and type adb shell make sure its working if you still have root it will show # if not it will show $ I believe no biggie as long as it picks up in shell.
then type : flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img
then type : flash_image /dev/block/mmcblk3p1 /sdcard/recovery_orig.img
select reboot from the recovery. now it will reboot and it will format misc and it will reboot again.
bogdi1988 suggest flash all images over again in fastboot
in this order
system.img
recovery.img
boot.img
thanks go to everyone who has a dell streak 7 that was willing to try all these hacks and risking your devices for the greater good of the streak
P.S. I will post system.img in a second
Also for fastboot help thank bogdi1988 again heres his post that helped me
http://forum.xda-developers.com/show...3&postcount=23

I was able to get the stock boot.img back on the device- however the recovery.img did not take after an unsuccessful update on a CW/rooted device. Now I have a partially corrupt device that I cannot get passed the FCs on... I cannot even get as far as to set the USB mount in debug. I can get ADB shell to see it and execute commands- however no dice on on recovery.
I can only gain read access to the file system on the device while running as well. ANyone have any thoughts on how to to push or write the recovery image so I can reflash this thing? Thanks for everything already.

Dont flash update with cwm recovery you can only flash custom roms with custom recovery
Sent from my Dell Streak 7 using XDA Premium App

when you say mount /system and /cache. is that through the ADB bridge? or the CMW recovery screen on the dell streak?

Cm
Sent from my Dell Streak 7 using XDA Premium App

thanks for all your help so far. I can run the ADB shell successfully and get the # on my dos prompt. I go in and mount /cache, /data, and /system on the streak itself, through the CMW "mounts and storage" screen. and i have copied both the uploaded files, boot and recovery, to my external SD card. but whenever i type the command in, i get "failed with error: -1"

would me having formatted the drives change what i need to type here : "flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img" ?

white99 said:
would me having formatted the drives change what i need to type here : "flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img" ?
Click to expand...
Click to collapse
i don t think you was suppose to format

I know. this was back when the problem first occured. did it in a bit of a panic trying to get past the CMW boot screen. i'm just wondering if the "flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img" would need to change at all considering the mistake.

white99 said:
I know. this was back when the problem first occured. did it in a bit of a panic trying to get past the CMW boot screen. i'm just wondering if the "flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img" would need to change at all considering the mistake.
Click to expand...
Click to collapse
i think you may need to call dell bro

think if i call it in under the warrant, they'll send it back damaged?

if you formatted you more then likely bricked it. call dell feed them some bs about when you tried to update it bricked your device they will send you a new one

How to restore your DS7

This may void your warranty, cost you your soul, and cause your spouse to leave you - ALL OF WHICH I AM NOT RESPONSIBLE FOR!
So, if it's because you screwed up flashing something, bricked your tablet with an OTA update after you installed CWM, or whatever, this is how you get it back to its outta-da-box shape!
(Please note, this assumes you have both installed CWM on your DS7 AND have installed the latest SDK on your computer).
1. Download the three attached .img files
2. Boot into CWM (since there really isn't anything else you can do)
3. In CWM, mount your SD card (so that you can view files via USB)
4. Plug in your DS7 to your computer, and copy the three .img files to the root of your SD card
5. Unmount your SD card, but leave the USB cable plugged into computer
6. Mount as many things as you can (ie system, boot, etc)
7. Open up command prompt, and navigate to your Android/tools folder, and type "adb devices"
8. There should be a number that shows up, or a "?" - either at this point is fine
9. Type the following command:
Code:
adb shell
a hash tag should show up that looks like this:
Code:
#~
10. Now, type the follow two commands one at a time:
Code:
flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img
flash_image /dev/block/mmcblk3p1 /sdcard/recovery_orig.img
11. now, select "reboot" from DWM to reboot your device. It should boot and say something like "Formating Misc", and then it will reboot repeatedly
12. Use something small to push the RESET button on the DS7 (it's next to the SD card slot)
Your screen should go blank
13. Now, press and hold both the POWER button and the VOLUME - button until the screen comes on saying that the "fastboot downloader" is booted
14. Copy the three .img files into the your Android/tools folder
15. Now type the following code:
Code:
fastboot devices
16. There should be a number that shows up, or a "?" - either at this point is fine once again
17. Now type the following commands one at a time. The first will take a while to complete - this is okay:
Code:
fastboot flash system system_orig.img
fastboot flash recovery recovery_orig.img
fastboot flash boot boot_orig.img
Now, if after every command a "finished." is given, along with the total time each command took, you may continue.
18. You may now type the triumphant command:
Code:
fastboot reboot
Which will reboot your device.
Give it a little bit to boot, but when all is done you should see the original T-Mobile boot animation and everything.
Special thanks to DJ_Steve, bogdi1988, and [email protected] for all your help!
Needed files:
system_orig.img
recovery_orig.img
boot_orig.img
[Edit]
For those users who need the original "flash_image.zip" file, I have uploaded it and it is available here.
PS: As an added note: **** you Koush! From all of the DS7 community!

Just what was needed
sent from somewhere

thanks but if you would of search there was a thread made already but i am sure the more the marrier

mooch777 said:
This may void your warranty, cost you your soul, and cause your spouse to leave you - ALL OF WHICH I AM NOT RESPONSIBLE FOR!
So, if it's because you screwed up flashing something, bricked your tablet with an OTA update after you installed CWM, or whatever, this is how you get it back to its outta-da-box shape!
(Please note, this assumes you have both installed CWM on your DS7 AND have installed the latest SDK on your computer).
1. Download the three attached .img files
2. Boot into CWM (since there really isn't anything else you can do)
3. In CWM, mount your SD card (so that you can view files via USB)
4. Plug in your DS7 to your computer, and copy the three .img files to the root of your SD card
5. Unmount your SD card, but leave the USB cable plugged into computer
6. Mount as many things as you can (ie system, boot, etc)
7. Open up command prompt, and navigate to your Android/tools folder, and type "adb devices"
8. There should be a number that shows up, or a "?" - either at this point is fine
9. Type the following command:
Code:
adb shell
a hash tag should show up that looks like this:
Code:
#~
10. Now, type the follow two commands one at a time:
Code:
flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img
flash_image /dev/block/mmcblk3p1 /sdcard/recovery_orig.img
11. now, select "reboot" from DWM to reboot your device. It should boot and say something like "Formating Misc", and then it will reboot repeatedly
12. Use something small to push the RESET button on the DS7 (it's next to the SD card slot)
Your screen should go blank
13. Now, press and hold both the POWER button and the VOLUME - button until the screen comes on saying that the "fastboot downloader" is booted
14. Copy the three .img files into the your Android/tools folder
15. Now type the following code:
Code:
fastboot devices
16. There should be a number that shows up, or a "?" - either at this point is fine once again
17. Now type the following commands one at a time. The first will take a while to complete - this is okay:
Code:
fastboot flash system system_orig.img
fastboot flash recovery recovery_orig.img
fastboot flash boot boot_orig.img
Now, if after every command a "finished." is given, along with the total time each command took, you may continue.
18. You may now type the triumphant command:
Code:
fastboot reboot
Which will reboot your device.
Give it a little bit to boot, but when all is done you should see the original T-Mobile boot animation and everything.
Special thanks to DJ_Steve, bogdi1988, and [email protected] for all your help!
Needed files:
system_orig.img
recovery_orig.img
boot_orig.img
PS: As an added note: **** you Koush! From all of the DS7 community!
Click to expand...
Click to collapse
Thanked using the Thanks button and Thanks for your post!
Just to remind me a little as I may miss something,
why we **** Koush? It is not his fault that we stuck at CWM, or is it????

jiwengang said:
Thanked using the Thanks button and Thanks for your post!
Just to remind me a little as I may miss something,
why we **** Koush? It is not his fault that we stuck at CWM, or is it????
Click to expand...
Click to collapse
No its not his fault.. people shouldn't have tried to install the ota update while having cwr installed.. instead should have waited for a zip of the update that hell posted on behalf of did steve. As I have said if you have cwr you really can't get ota updates and install them the normal way. If the update was an update.zip you could flash through cwr but dell uses pgk files not zip.. so the only way to update is to wait for a dev to release a flashable cwr zip fike
Sent from my HTC Glacier using XDA App

The reason I made this post was so that we could have one concise, iD10t proof solution for people who were dumb like me. There's other posts, but you have to go back and forth to get the solution.
And the "Koush-****ing" was because of his unannounced abandonment of his projects, and those he was working with.
And thank you for the kind thanks!
Sent from my Dell Streak 7 using XDA App

mooch777 said:
The reason I made this post was so that we could have one concise, iD10t proof solution for people who were dumb like me. There's other posts, but you have to go back and forth to get the solution.
And the "Koush-****ing" was because of his unannounced abandonment of his projects, and those he was working with.
And thank you for the kind thanks!
Sent from my Dell Streak 7 using XDA App
Click to expand...
Click to collapse
Did he retire completely?

graffixnyc said:
Did he retire completely?
Click to expand...
Click to collapse
Think so!
From my CM7 UrBan Glacier

Hi,
I am the situation described above as I tried the OTA and am now stuck in CWR.
I followed the directions putting the 3 files on the root of my DS7 and am stuck at the following:
~ # flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img
flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img
failed with error: -1
~ #
Any ideas.....?
Thanks
SkI

Error 1
Error 1 means that the file is not where it is supposed to be. In this case on the SD card. Check and make sure that you have the right file, with the right file name on the root of your SD card and try again!
Good Luck

What does
"Error scanning partitions" means?...

jiwengang said:
What does
"Error scanning partitions" means?...
Click to expand...
Click to collapse
nvm, it is solved. don't use your own flash_image. use the stock one.

dj_ski69 said:
Hi,
I am the situation described above as I tried the OTA and am now stuck in CWR.
I followed the directions putting the 3 files on the root of my DS7 and am stuck at the following:
~ # flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img
flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img
failed with error: -1
~ #
Click to expand...
Click to collapse
+1 same here...
I find that at step 3... I mount sdcard... it shows on PC... I copy the 3 files to drive... unmount sdcard... mount everything else... run the other commands then get error... when I repeat the process I notice the files I copied are not there... ?
so I tried to adb push the files... they say they went thru correctly... but still get the same result as above...
any ideas?

dfspot said:
+1 same here...
I find that at step 3... I mount sdcard... it shows on PC... I copy the 3 files to drive... unmount sdcard... mount everything else... run the other commands then get error... when I repeat the process I notice the files I copied are not there... ?
so I tried to adb push the files... they say they went thru correctly... but still get the same result as above...
any ideas?
Click to expand...
Click to collapse
when you adp push to sdcard, make sure you mounted it already.
after that , it always help to adb shell ls /sdcard to make sure all files are there.
then you go to adb shell,
use the stock flash_image to flash. remember point to the path to flash_image
eg. flash_image /dev/block/mmcblk3p2 /sdcard/boot_orig.img

my understanding, if you don't mount sdcard, you canot see your sdcard FROM the tablet's perspective.
I mean, for table's flash_image to work, it has to be able to access its drive, in this case, is sdcard 's content.
so did you try leave sdcard mount and do the command above?

Hey Team...
can someone help me find the stock flash_image plz.....

I soooooooooooooo happy I was able to fix my Streak 7......yahooooooooo
I was missing the correct flash_image file which i took from the Galaxy Tab flash_image which is the same for the Dell and follow the direction and I now up again.......
Thanks guys

chris73 said:
I soooooooooooooo happy I was able to fix my Streak 7......yahooooooooo
I was missing the correct flash_image file which i took from the Galaxy Tab flash_image which is the same for the Dell and follow the direction and I now up again.......
Thanks guys
Click to expand...
Click to collapse
What command did you do.
Sent from my HTC Glacier using XDA App

chris73 said:
I soooooooooooooo happy I was able to fix my Streak 7......yahooooooooo
I was missing the correct flash_image file which i took from the Galaxy Tab flash_image which is the same for the Dell and follow the direction and I now up again.......
Thanks guys
Click to expand...
Click to collapse
do I need to push flash_image to my tablet?

If I remember correctly it needs to be in the nvflash folder
Sent from my Dell Streak 7 using XDA Premium App