Related
What are the differences in rooting, roms, etc.? Can all directions be followed for the O2x to root the G2x and install custom ROMs?
The root should work fine, CWM needs to be updated, so don't use that
KernelCrap said:
The root should work fine, CWM needs to be updated, so don't use that
Click to expand...
Click to collapse
What recovery do you use ?
hah2110 said:
What are the differences in rooting, roms, etc.? Can all directions be followed for the O2x to root the G2x and install custom ROMs?
Click to expand...
Click to collapse
As said, rooting works as on the O2X. CWM Recovery shouldnt be flashed now, since the partition layout is different and Paul has to sort that out.
Installing O2X custom roms shouldnt work correctly since the G2X and O2X have different basebands. The custom rom has to support the used baseband by using the correct RIL. In time G2X custom roms will be released .
Egan said:
As said, rooting works as on the O2X. CWM Recovery shouldnt be flashed now, since the partition layout is different and Paul has to sort that out.
Installing O2X custom roms shouldnt work correctly since the G2X and O2X have different basebands. The custom rom has to support the used baseband by using the correct RIL. In time G2X custom roms will be released .
Click to expand...
Click to collapse
in a subforum i hope :S
Im sure ive read somewhere that they are going to make the partition layout the same or something, so there wont be any need for seperate roms
dazzle999 said:
in a subforum i hope :S
Click to expand...
Click to collapse
yes we do have a g2x forum now
any roms/releases will be put there =)
Moonie17 said:
Im sure ive read somewhere that they are going to make the partition layout the same or something, so there wont be any need for seperate roms
Click to expand...
Click to collapse
They probably do need a seperate rom, because of the different baseband and most likely ril.
Sent from my LG-P990 using XDA Premium App
Cheers for correcting me! good point read that the roms need to support the baseband also! perhaps a rom could support multiple basebands?
I think O2x and g2x can share roms. The devs will just have to tweak a little to make it work on the other. Am i right or wrong?
Do you guys expect the vanilla Android rom from G2x to be released for the O2x as well?
Between G2X and O2X, which one have higher benchmark on stock rom??
Sent from my LG-P990 using XDA App
naimmkassim said:
Between G2X and O2X, which one have higher benchmark on stock rom??
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
If you would post benchmark results of O2X, I will post G2X results after I get it today or tomorrow (quadrant and linpack).
I get 2614 Quadrant score on completely stock rom
Please at the stock ROM, try to run second test immediately after first. I think you should take better results.
peacekeeper05 said:
I think O2x and g2x can share roms. The devs will just have to tweak a little to make it work on the other. Am i right or wrong?
Click to expand...
Click to collapse
Seems like it: http://twitter.com/CM_arcee/status/60312815839350784
spawndk said:
I get 2614 Quadrant score on completely stock rom
Click to expand...
Click to collapse
I got best at 2650 (some were slightly lower) with G2X.
Linpack really sucked - could not break 40 (had done better then that - into the upper 50's with MT4G - overclocked of course).
I got 2680 for my O2X on stock rom. Best record.
Sent from my LG-P990 using XDA App
naimmkassim said:
I got 2680 for my O2X on stock rom. Best record.
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
Here is the picture.
The G2X seems much faster than the O2X.
Hi.
As I am using customkernels for my o2x I am curious if anyone could help with how to check if all the various scripts in init.d works??
There have been released "swapping" for this phone in some roms due to its low ram. If anyone could explain the work of it as well as installing it for a noob like me I would appreciate it alot.
Thanks in advance and happy new year all of you. Thanks to all the devs making our phones and lives easier
SuperSkill
SuperSkill said:
Hi.
As I am using customkernels for my o2x I am curious if anyone could help with how to check if all the various scripts in init.d works??
There have been released "swapping" for this phone in some roms due to its low ram. If anyone could explain the work of it as well as installing it for a noob like me I would appreciate it alot.
Thanks in advance and happy new year all of you. Thanks to all the devs making our phones and lives easier
SuperSkill
Click to expand...
Click to collapse
It mainly depends on which ROM you use. I use Topogigi modded to 20M: it works. With Hell_97 roms it works also.
See in Spica's thread about RC11: he explains in a recent post how to install. With purely stock ROM it seems more tricky.
Right now i am at Gueste 2.1 where i believe swap would be possible, earlier GR5, fr19 and sometimes cm7. Prefer hp kernel and have been using powerpacks, all installed by the instructions. Have noticed diffences in kernelreleases but not hp pp. BB flashed as recommended with matching ril. How do i check if it actually works?
Happy new year
Sent from my LG-P990 using xda premium
Hi, I would like to know what I have to learn in order to mod the stock kernel of GT-i9000, which last version (linux version 2.6.35) was written for the use in Gingerbread 2.3.6. My intention is to make it work in ICS or Jelly Bean Custom Roms, and then start tweaking and experimenting, but I need the basics first
I'm talking about knowledge specific to the kernel since I know how to make C programs and the structure of the android stack (Watched this someone? It's great!). Where I have to go? Websites specialized in the matter, ebooks to read, docs... By the moment I have downloaded and installed the CodeSourcery toolkit Samsung tells to install in the README file.
I expect to not completely brick my only sgs phone, but anyway I would like to know how to do it
EDIT: I edited a bit my question since I though it wasn't clear enough what I already know.
No one can help me? I don't expect to have the whole story, just to know what I have to learn :/ May be I'm not in the right subforum for this question. Full noob here at XDA xD
16bitboy said:
No one can help me? I don't expect to have the whole story, just to know what I have to learn :/ May be I'm not in the right subforum for this question. Full noob here at XDA xD
Click to expand...
Click to collapse
http://www.semaphore.gr/
I do not know, but the kernel is here and probably the best I know?
misacek said:
http://www.semaphore.gr/
I do not know, but the kernel is here and probably the best I know?
Click to expand...
Click to collapse
Yup but is not because I though there was no kernel. I know there are a lot, Devil's, Semaphore... I just want to do it by myself
No,Good work.:banghead:
Sent from my GT-I9000 using xda app-developers app
If you want to create a kernel for ics/jb, you should start with the default kernel of CM9/CM10, as most kernels for ics/jb are based on it. Then you could compare it to Semaphore, devil, ..., to see what they do differently.
I got time today a little while to observe OC possibility, and attempted. I was in hurry and these days I dont much have time these days so I've not tested what I've writtten, but theoretically it should work without issues:
OC Engine For LG Optimus 2x For 2.6.39.x Kernel
*It's written for 1.2Ghz but it's easy to ramp up to 1.4/1.5 by observing codes.
Devs feel free to use ,
and rippers dont rip codes to represent it as yours.
Download
*See attached patch file
Wow thank you so much.....will have a look at it right away......
spica1234 said:
I got time today a little while to observe OC possibility, and attempted. I was in hurry and these days I dont much have time these days so I've not tested what I've writtten, but theoretically it should work without issues:
OC Engine For LG Optimus 2x For 2.6.39.x Kernel
*It's written for 1.2Ghz but it's easy to ramp up to 1.4/1.5 by observing codes.
Devs feel free to use ,
and rippers dont rip codes to represent it as yours.
Download
*See attached patch file
Click to expand...
Click to collapse
this is another OC/UV patch
http://forum.xda-developers.com/showthread.php?t=1971350 (Please see attachments)
based on the "Overclocking the Toshiba AC100" work by gordan
- http://www.altechnative.net/2011/12/31/overclocking-the-toshiba-ac100/
and the TF101 OC by ibladesi
- https://github.com/ibladesi/TF101-HighOC-3P1
it works nicely with my SU660
harsh already applied simplified version of this OC/UV patch on his kernel
https://github.com/bhanvadia/lge-kernel-star/commit/ed65546739d458454f0c4d14902d970626046e06
https://github.com/bhanvadia/lge-kernel-star/commit/31cd7ea99b962386ba12e36fc99e3ac9dc858def
it needs two fixes
- https://github.com/bhanvadia/lge-kernel-star/commit/604d675b84aaa905a675109e52b4becebded9cff
- https://github.com/bhanvadia/lge-kernel-star/commit/4ade8a95ed07aa5ac08d1923f48192f91ced8d68
Thanks wkpark for all these references. I logged in xda after many days, I wasnt aware about yours and harsh's attempt about oc. Anyways but I am happy, about your references and yours and harsh's work . Actually your 2 refrences posted last are useful that's neccessory for oc, I made a long route instead as I din't get much time to observe other files.
Thank you anyways
Sent from my LG-P990 using xda app-developers app
Welcome back buddy.....
Old is gold.....have seen the two old buddies come back when there sadness with one good one gone....
But life is like that......good and bad
O2X with Magical ROM and supersonic kernels from my buddies
whank u spica any one compile a OC kernel all ready?
Take your time, but those can't wait, all of us in fact, must try Topogigis rom
Sent from the new smoothly LGP990
Thanks Spica
Subscribed :laugh:
CarloIT said:
Thanks Spica
Subscribed :laugh:
Click to expand...
Click to collapse
I logged in after many days and found wkpark has already made oc available in easy more effective ways and more robustly it has been written
Users are usually don't aware about the real heroes and those such persons are wkpark, harsh etc who has given very much contributions for lg optimus 2x.
So thanks deserving persons are wkpark and harsh as well that users must know
"Share, learn and enjoy" that's the key to OpenSource
Sent from my LG-P990 using xda app-developers app
wkpark said:
this is another OC/UV patch
http://forum.xda-developers.com/showthread.php?t=1971350 (Please see attachments)
based on the "Overclocking the Toshiba AC100" work by gordan
- http://www.altechnative.net/2011/12/31/overclocking-the-toshiba-ac100/
and the TF101 OC by ibladesi
- https://github.com/ibladesi/TF101-HighOC-3P1
it works nicely with my SU660
harsh already applied simplified version of this OC/UV patch on his kernel
https://github.com/bhanvadia/lge-kernel-star/commit/ed65546739d458454f0c4d14902d970626046e06
https://github.com/bhanvadia/lge-kernel-star/commit/31cd7ea99b962386ba12e36fc99e3ac9dc858def
it needs two fixes
- https://github.com/bhanvadia/lge-kernel-star/commit/604d675b84aaa905a675109e52b4becebded9cff
- https://github.com/bhanvadia/lge-kernel-star/commit/4ade8a95ed07aa5ac08d1923f48192f91ced8d68
Click to expand...
Click to collapse
can u build one version for p990!
anjo88 said:
can u build one version for p990!
Click to expand...
Click to collapse
commit in my github is for P990 itself.
But as Topo said, OC is flaky currently. Anything more than 1.2 GHz make phone hang. Need to find where did NVIDIA implemented code for making CPU stuck as half frequency if its OCed.
Harsh said:
commit in my github is for P990 itself.
But as Topo said, OC is flaky currently. Anything more than 1.2 GHz make phone hang. Need to find where did NVIDIA implemented code for making CPU stuck as half frequency if its OCed.
Click to expand...
Click to collapse
great can u share it so that people can test! i have all msot shure that audio bug is boatloader related so if some on can compile a cm10 from RC and apply the new bootloader for testing will be great!
Anda I'm saying that because 28e/g cm10 old bootloader call problems v228/e/g new bootloader at 10 not a sigle call problem!
anjo88 said:
great can u share it so that people can test! i have all msot shure that audio bug is boatloader related so if some on can compile a cm10 from RC and apply the new bootloader for testing will be great!
Anda I'm saying that because 28e/g cm10 old bootloader call problems v228/e/g new bootloader at 10 not a sigle call problem!
Click to expand...
Click to collapse
bootloadr is not related with audio bug... and that will never be.
official leaked ics roms doesn't have audio bugs just because they are official p990 roms with the official p990 kernel from lg, i remind you that cm10 is using su660 kernel source, a not completely but strongly enough different phone.
pidocchio said:
official leaked ics roms doesn't have audio bugs just because they are official p990 roms with the official p990 kernel from lg, i remind you that cm10 is using su660 kernel source, a not completely but strongly enough different phone.
Click to expand...
Click to collapse
If you read a bit more, you'll find out that the original P990 ICS leak with untouched kernel is also suffering from the same bug. Nothing to do with CM10 or SU660...
Sent from my LG-P990 using xda app-developers app
pidocchio said:
bootloadr is not related with audio bug... and that will never be.
official leaked ics roms doesn't have audio bugs just because they are official p990 roms with the official p990 kernel from lg, i remind you that cm10 is using su660 kernel source, a not completely but strongly enough different phone.
Click to expand...
Click to collapse
If you read a bit more, you'll find out that the original P990 ICS leak with untouched kernel is also suffering from the same bug. Nothing to do with CM10 or SU660...
Click to expand...
Click to collapse
I think that the new bootloader and related thing have better compatibility with ics then the old gb bootloader, for sure..
I'm using the leaked ics from the beginning and i don't have a single call bug
Buccio said:
I think that the new bootloader and related thing have better compatibility with ics then the old gb bootloader, for sure..
I'm using the leaked ics from the beginning and i don't have a single call bug
Click to expand...
Click to collapse
why dont adapt cm10 with new bootloader and then we know wheter the in call audio bug is still present or not....sorry for oot
godh3ll said:
why dont adapt cm10 with new bootloader and then we know wheter the in call audio bug is still present or not....sorry for oot
Click to expand...
Click to collapse
Agree, someone with kind heart and capable should build cm10 with new bootloader/layout partition.
aldyu said:
Agree, someone with kind heart and capable should build cm10 with new bootloader/layout partition.
Click to expand...
Click to collapse
+11111
godh3ll said:
why dont adapt cm10 with new bootloader and then we know wheter the in call audio bug is still present or not....sorry for oot
Click to expand...
Click to collapse
I know audio bug is really an annoying bug.
I don't know whether audio bug is related to boot loader or not.
And about boot loader, I won't say its impossible w/o sources but we don't have boot loader sources, neither sources of old nor new:/
Sent from my LG-P990 using xda app-developers app
don't care about OC on JB, need ramhack...CM10 have tiny free ram
So I just got a Galaxy Note N-7000 from my dad,and it is already rooted,
but I'm looking to replace my ROM so I have a few questions (hope this is the right place to open this thread in,if not - sorry in advance):
1.Can anyone recommend a JB based rom with nice (not the most important factor to me) design,that mainley runs smooth and FC-free?
[Also very important to me - I need something I can install hebrew on)
2.Does anybody know any JB based roms that have full hebrew support?
[This is the only one I have found :http://forum.xda-developers.com/showthread.php?t=2208589
and I'm not so sure about it,any feedbacks for pros&cons for this ROM will be greatly appreciated. ]
Thank you!
beniferg said:
So I just got a Galaxy Note N-7000 from my dad,and it is already rooted,
but I'm looking to replace my ROM so I have a few questions (hope this is the right place to open this thread in,if not - sorry in advance):
1.Can anyone recommend a JB based rom with nice (not the most important factor to me) design,that mainley runs smooth and FC-free?
[Also very important to me - I need something I can install hebrew on)
2.Does anybody know any JB based roms that have full hebrew support?
[This is the only one I have found :http://forum.xda-developers.com/showthread.php?t=2208589
and I'm not so sure about it,any feedbacks for pros&cons for this ROM will be greatly appreciated. ]
Thank you!
Click to expand...
Click to collapse
Welcome!
That is a nice TW (stock samgsung software) based rom, with some tweaks and a diferent kernel you can make it really fast.
On the other hand, as you said you want it to look good I'd recommend you to use VengeanceNote TW, as it's MIUI over the TW base. It is fast. It is beautiful. I'm not sure about the hebrew support tough, you might want to head to the thread and ask there. The dev, Gerrett, is preetty nice and wil most definitely help you as much aas he can.
If you want to use an AOSP ( Google software ) I'd most definitely recommend you Asylum + NX Kernel. This is as fast as my note has ever been. Don't worry about everyone on the thread being crazy tough. Thay are nice after you get used to them
Anyway, good luck with your phone You'll love it
projeto56 said:
Welcome!
That is a nice TW (stock samgsung software) based rom, with some tweaks and a diferent kernel you can make it really fast.
On the other hand, as you said you want it to look good I'd recommend you to use VengeanceNote TW, as it's MIUI over the TW base. It is fast. It is beautiful. I'm not sure about the hebrew support tough, you might want to head to the thread and ask there. The dev, Gerrett, is preetty nice and wil most definitely help you as much aas he can.
If you want to use an AOSP ( Google software ) I'd most definitely recommend you Asylum + NX Kernel. This is as fast as my note has ever been. Don't worry about everyone on the thread being crazy tough. Thay are nice after you get used to them
Anyway, good luck with your phone You'll love it
Click to expand...
Click to collapse
First of all - thank you very much for your quick comment
It's good to meet nice and kind people like you! :good:
Second of all - about that VenganceNote TW - it looks very nice but I had a very bad experience with MIUI on my old SGS,
tons of FC and sometimes I coulden't take calls.
Do you know if this one is stable?
Also,do you know anything about this one ? :
http://forum.xda-developers.com/showthread.php?t=2185614
Would you recommend it?
TY again!
beniferg said:
First of all - thank you very much for your quick comment
It's good to meet nice and kind people like you! :good:
Second of all - about that VenganceNote TW - it looks very nice but I had a very bad experience with MIUI on my old SGS,
tons of FC and sometimes I coulden't take calls.
Do you know if this one is stable?
Also,do you know anything about this one ? :
http://forum.xda-developers.com/showthread.php?t=2185614
Would you recommend it?
TY again!
Click to expand...
Click to collapse
You're lucky then, I had FC on all ROMs i've used on my SGS
I've used VengeanceNote for a long time. It is very stable indeed. Only problem i could remember is that it had a duplicated root manager app, but if you opened the right one you would have no problem at all. I'm just waiting for a custom kernel to support it so i can jump back to it.
Never used Carbon Rom itself, but from what i've experienced with this all-in-one roms, they're not very stable.
I'd say if you're interested on AOSP Asylum is the way to go. It's really clean and fast. And if you don't like the all black look you can always install CM10 themes
projeto56 said:
You're lucky then, I had FC on all ROMs i've used on my SGS
I've used VengeanceNote for a long time. It is very stable indeed. Only problem i could remember is that it had a duplicated root manager app, but if you opened the right one you would have no problem at all. I'm just waiting for a custom kernel to support it so i can jump back to it.
Never used Carbon Rom itself, but from what i've experienced with this all-in-one roms, they're not very stable.
I'd say if you're interested on AOSP Asylum is the way to go. It's really clean and fast. And if you don't like the all black look you can always install CM10 themes
Click to expand...
Click to collapse
I think that would be great,as I said I'm looking for a fast,clean ROM and Asylum sounds perfect,
just 2 more small questions:
1.About that kernel you've recommended,is it mendatory to install with Asylum or I can just stick with my PhilZ kernel ?
2.I would love it if you could explain to me how to install some CM10 themes and where to get them !
beniferg said:
I think that would be great,as I said I'm looking for a fast,clean ROM and Asylum sounds perfect,
just 2 more small questions:
1.About that kernel you've recommended,is it mendatory to install with Asylum or I can just stick with my PhilZ kernel ?
2.I would love it if you could explain to me how to install some CM10 themes and where to get them !
Click to expand...
Click to collapse
Nop, you can use phlz for flashing, but Asylum will overwrite it with CM10 kernel. But i recommend flashing NX after you flashed the rom. It has OC support and GPU clock control. It makes things really smooth.
About the themes you can get them on play store or on some threads here on xda. A quick google search for "CM10 theme" will show you lots of results.
Sent from my Transformer using Tapatalk HD
projeto56 said:
Nop, you can use phlz for flashing, but Asylum will overwrite it with CM10 kernel. But i recommend flashing NX after you flashed the rom. It has OC support and GPU clock control. It makes things really smooth.
Click to expand...
Click to collapse
It won't work if I flash the Asylum and after it overwrites it with CM10 kernel I flash the PhilZ kernel? (Instead of NX)
beniferg said:
It won't work if I flash the Asylum and after it overwrites it with CM10 kernel I flash the PhilZ kernel? (Instead of NX)
Click to expand...
Click to collapse
As far as i know philz is for TW only, so it won't work.
Any specific reason you want to stick with it?
Sent from my Transformer using Tapatalk HD
projeto56 said:
As far as i know philz is for TW only, so it won't work.
Any specific reason you want to stick with it?
Sent from my Transformer using Tapatalk HD
Click to expand...
Click to collapse
Ummm,actually no,my dad just recommended it to me he said PhilZ is one of the best kernels developers out there,
and that its very safe to use his recovery (maybe I didn't understand correctly but I heard there was a problem some time ago with
ICS kernels/wiping or something,and that this phone got bricked once because of that)
He also said speedmod is great,but I dunno that guy or his kernels lol.
beniferg said:
Ummm,actually no,my dad just recommended it to me he said PhilZ is one of the best kernels developers out there,
and that its very safe to use his recovery (maybe I didn't understand correctly but I heard there was a problem some time ago with
ICS kernels/wiping or something,and that this phone got bricked once because of that)
He also said speedmod is great,but I dunno that guy or his kernels lol.
Click to expand...
Click to collapse
Indeed he's a great dev, and he saved many of us from bricking our devices
On stock samsung kernels, there's a bug, that when you wipe your data partition on recovery it corrupt's the memory chip, rendering it useless. So if you are going to use stock roms on your phone, either don't wipe or stick to safe kernels.
On the other hand, the AOSP kernels don't show such behaviour and are generally safe. So if your going with Asylum, don't worry. You're safe.
Sent from my Transformer using Tapatalk HD
projeto56 said:
Indeed he's a great dev, and he saved many of us from bricking our devices
On stock samsung kernels, there's a bug, that when you wipe your data partition on recovery it corrupt's the memory chip, rendering it useless. So if you are going to use stock roms on your phone, either don't wipe or stick to safe kernels.
On the other hand, the AOSP kernels don't show such behaviour and are generally safe. So if your going with Asylum, don't worry. You're safe.
Sent from my Transformer using Tapatalk HD
Click to expand...
Click to collapse
Great!!
BTW:
AirView+Ink Effect are built in Asylum?
If not,can I add them somehow?
[You have a lot of patience for my questions,I appreciate it alot! ]
beniferg said:
Great!!
BTW:
AirView+Ink Effect are built in Asylum?
If not,can I add them somehow?
[You have a lot of patience for my questions,I appreciate it alot! ]
Click to expand...
Click to collapse
No, unfortunatelly you can't add thos features on any AOSP rom. Neither those nor Snote and other TW apps.
VengeanceNote include them tough. Seems you have to make your choice
No problem man I felt lost when i've changed my phone, and if someone haven't made the same thing for me i would have probably bricked it
Sent from my Transformer using Tapatalk HD
projeto56 said:
No, unfortunatelly you can't add thos features on any AOSP rom. Neither those nor Snote and other TW apps.
VengeanceNote include them tough. Seems you have to make your choice
No problem man I felt lost when i've changed my phone, and if someone haven't made the same thing for me i would have probably bricked it
Sent from my Transformer using Tapatalk HD
Click to expand...
Click to collapse
LOL
Thanks for everything man! have a great weekend !:fingers-crossed:
beniferg said:
LOL
Thanks for everything man! have a great weekend !:fingers-crossed:
Click to expand...
Click to collapse
Thanks bro!
Good luck on your first flash
Anything else you need PM me
Sent from my Transformer using Tapatalk HD