[Q] Help a total Nook/Android noob - Nook Color General

Long story short: I bought my Nook to root it. I'm not a complete moron, but I'm a little overwhelmed by all of the options for modifying the Nook. I have tons of iOS experience since I have an iPhone business on the side, so I'm not afraid to mess around with something.
The problem is, the only Android device I've spent more than 20 minutes with is the Samsung Captivate, which was ridiculously easy to root and then unlock so I could sell it.
Other than that, not much Android experience.
I bought the Nook because I need a portable device to view documents and the occasional entertainment. I'm a pilot and instantly recognized the advantage of being able to take aviation publications with me everywhere, including the cockpit. I considered the iPad since I'm intimately familiar with iOS, but the cost was a little higher than I wanted to go.
So, here's what I need: a VERY stable Nook that can efficiently read PDF files, H.264 movies and still maintain respectable battery life. I will be heading overseas with less than dependable access to internet, so I need something that's pretty worry-free since I might not be able to worry with finding a fix online.
Where to start?
I've already rooted it using AutoNooter, but it seems wonky at best. The N button rarely works at all and SoftKeys isn't much help either. I currently haven't found a way to go "back" in the Market app, and still haven't figured out how to sign in on my YouTube account.
So, what are your suggestions for setup? Please be detailed with your suggestions and save the flaming for someone who cares.
Thanks!

I didn't like the stock rom either...
I went immdiatly to nookie froyo, which is the most stable rom other then stock.
You should try it.
You should also try cm7 and it varients, but those are less stable.
you can check out the tutorials on remapping the volume keys for back and menu, although I find soft keys a valiable option.

Can you point me to the best method of install for Froyo? Is it better on internal or keeping it on the SD card? I'm not worried about warranty or restoring the stock ROM, so which one is best overall?

LongbowFoSho said:
Can you point me to the best method of install for Froyo? Is it better on internal or keeping it on the SD card? I'm not worried about warranty or restoring the stock ROM, so which one is best overall?
Click to expand...
Click to collapse
Try it on the SD card first, just to start. If you screw up, you can just format the card and start over, it's relatively pain free that way. But it will run a little snappier on the actual Nook eMMC, but you can always do that later.
Another factor is that B&N will be updating all Nook Colors to Froyo in April. If you run off an SD card until then, then you can root the Nook after that update (with new Autonooter built for that new update), and you will have a more stable Froyo since it will be a professional kernel built for the hardware.
You'll need a Sandisk Class 4 or 6 uSD card or a Transcend Class 6 (unless you have already bought something, in which go ahead and try that card).
The build is at:
http://forum.xda-developers.com/showthread.php?t=922324

Yeah......about that "don't flash the internal memory" part.....
Everything went great until I rebooted and now its stuck at the Android screen with the flashing cursor.
Now I'm just trying to figure out how to restore it. Ugh.
I'm using a 32GB SanDisk SDHC Class 6 card, BTW.
EDIT: Well, I was able to get the build from your link running from the SD card, but all of the processes suddenly and continually fail. All I get is pop up after pop up about errors.
I'm done screwing around with this for today. If I can't get something usable by tomorrow night, I'm selling this POS and getting an iPad. This isn't worth it just to save $100.

I don't know what all you did to the internal memory, but chances are this will work to get back to stock.
http://nookdevs.com/Flash_back_to_clean_stock_ROM
If that doesn't work then
http://forum.xda-developers.com/showthread.php?t=945838
Softkeys works, and I use it, but it's...not intuitive...this page made things clear for me. Reading through this should get your n key working and whatnot.
http://nookdevs.com/NookColor_Default_Launcher
Disabling the service in the softkeys settings was good for me. That stupid little button was always in the wrong place no matter where I put it and wasn't useful anyhow. I also didn't install home switcher or whatever. If you get your n button set wrong, you can just clear the defaults from the app settings for whatever app is set to the n button.
Sounds like you got it rooted and everything, but here is a link for reference anyhow.
http://forum.xda-developers.com/showthread.php?t=942424
A note on those instructions: youtube did nothing but crash on me. The purpose of logging in with youtube is to get your device linked to your google account so you can get into the market. I didn't use youtube, i think i used gmail or the market itself or something. I don't remember. I just uninstalled youtube, you don't need it. Youtube video's still download and play in the default video player if you visit youtube.com from the web browser.
As far as your options for operating systems. I haven't used froyo, and haven't spent much time with honeycomb, so grain of salt and stuff. Plus it really depends on what you need/want.
Note: after booting a fresh burn for the first time, just walk away for five minutes. I'm not sure why (maybe something to do with the not quite jit doing it's thing?), but it will be more stable if you do.
Froyo gives flash and slightly better performance over stock. I think video is on par with stock, but it could be worse, i'm not sure. It's almost certainly not better. I can't speak for stability, as I haven't tried it. I think bluetooth is possible but not realistic? I know occip got the chip responding, but I haven't seen anything indicating it's useable. Links in previous posts so i won't make another.
Cyanogenmod gives all that froyo gives plus bluetooth support. Video framerate is poor (movies, not games and whatnot). Stability isn't as good as stock. Mostly it's fine but every once in a while things start force closing like mad and i have to reboot. Also battery life isn't good with cyanogenmod. Sleep has been disabled as there is a bug with it. It will still last over a day without a charge though. It's what i use day to day. Really amazing and fast moving. Seems like every day a new major bug is fixed or a whole new piece of hardware is working. Linkie:
http://forum.xda-developers.com/showthread.php?t=1000957
Honeycomb is really cool and it's amazing what deeperblue did (without much source omgwat?) but it's still kinda just a toy until google releases all the source code. No flash, no hardware accelerated video, no bluetooth, no reason to use it, other than aesthetics. Annoying ui glitches in portrait mode. Neat and worth an sd burn to play with, but not for using day to day in my opinion.
http://forum.xda-developers.com/showthread.php?t=936995
Of course there is no need to choose one! There are a couple option for multibooting in the forums and I intend to get around to combining a few to triple boot. Right now this is what I use:
http://forum.xda-developers.com/showthread.php?t=947698
I'm set up to boot rooted stock off internal memory and cm7 off of uSD
P.S. If you just want it to work and be a full tablet it might be worth the extra $150 or so for an IPad. The nook has been fantastically useful for my needs and I don't think i've had this much fun with a piece of kit since my first apple II. On the other hand I've wasted a fair number of hours reading about and "bricking" the thing so...ymmv depending on what your needs/wants are.

Hi, Im new here, too.
Id like to do this "Go back in Root Explorer, and in system/app, mount as r-w and rename Phone.apk and TelephonyProvider.apk to anything else (adding .bak onto the end would be fine)." But I can't change the permission...
Even I do habe only CWM 3.0.0.6 and like to have the newest one (3.0.1.0) and Iam using right now the Phirmod V5.1
Has anyone some hinds? Cheers

Can you elaborate on "can't change permissions"? Can you not find the option, or are you making the change and its not working?
For your clockwork upgrade question, is your recovery internal, or on a bootable SD?
Sent from my Nexus One using XDA Premium App

Thanks for the detailed response, ylixir. I'm attempting to go back to stock now and will definitely try your suggestions.
I'm still going to try Nookie since the general consensus is that it's the most stable. I don't care about BT or even Flash since I'll just be using this mostly for mobile document viewing in Afghanistan.
Thanks again and will update with my results.

chef123 said:
Hi, Im new here, too.
Id like to do this "Go back in Root Explorer, and in system/app, mount as r-w and rename Phone.apk and TelephonyProvider.apk to anything else (adding .bak onto the end would be fine)." But I can't change the permission...
Even I do habe only CWM 3.0.0.6 and like to have the newest one (3.0.1.0) and Iam using right now the Phirmod V5.1
Has anyone some hinds? Cheers
Click to expand...
Click to collapse
I know you're new and all, but generally its considered rude to jump into someone else's thread and ask your own question. You'll probably get a lot more visibility (and subsequently a solution to your problem) by making your own thread.
Thanks!

LongbowFoSho said:
I know you're new and all, but generally its considered rude to jump into someone else's thread and ask your own question. You'll probably get a lot more visibility (and subsequently a solution to your problem) by making your own thread.
Thanks!
Click to expand...
Click to collapse
Dude! The forum rules tell you to search and piggyback existing threads before making your own thread. The idea is that the closely related information is localized, and searching is made much more easier without having multiple threads on the same subject...
Sent from my Nexus One using XDA Premium App

Well, I've got it back to stock 1.1 now. I'm VERY happy to see that since I still might sell this thing if I can't make some headway with a usable ROM.

danger-rat said:
Dude! The forum rules tell you to search and piggyback existing threads before making your own thread. The idea is that the closely related information is localized, and searching is made much more easier without having multiple threads on the same subject...
Sent from my Nexus One using XDA Premium App
Click to expand...
Click to collapse
Well, this is the first forum I've ever seen that operates that way.

Well, just tried running Froyo from the SD card and it just sits at the Android splash screen (the animated one). It also did this last night, but I thought it was because of the non-functional Froyo I had flashed internally.
I guess I'll give HC a shot to see if anything actually works on this device.

Just ran HC and although I finally got past the "decrypted data" error (after three re-images and flashing, no less), I dunno.
I'm going to try rooting the stock 1.1 again and see how that goes. If I can't get comfortable with that, then I'm done. I have better things to do besides sitting around for hours and hours trying to get something to be remotely practical for every day use.
If I wanted a tinkering project, I'd buy an old car.

Autonooker is super easy to get the stock ROM working as an Android tablet.
I'm sure it's stated on the wiki that Nookie Froyo and other ROMs are in development and not meant for stable systems.
Anyway, hope Autonooker works for you

Good news! Looks like perseverence pays off because rooting 1.1 seems to have worked perfectly this time.
I am fully signed in on YouTube and email, and all the buttons are working properly.
Now that I've finally gotten that out of the way, is there a way to OC the stock ROM? Its not really a need, just curious LOL. I've seen SetCPU mentioned a few times, but IIRC its intended for 2.2 and up only. Correct me if I'm wrong.
Also, best PDF reader for stock ROM?

chef123 said:
Hi, Im new here, too.
Id like to do this "Go back in Root Explorer, and in system/app, mount as r-w and rename Phone.apk and TelephonyProvider.apk to anything else (adding .bak onto the end would be fine)." But I can't change the permission...
Even I do habe only CWM 3.0.0.6 and like to have the newest one (3.0.1.0) and Iam using right now the Phirmod V5.1
Has anyone some hinds? Cheers
Click to expand...
Click to collapse
Get a Terminal Emulator from the Market. Now type in the following:
If running off SD
Code:
su
mount -o rw,remount /dev/block/mmcblk1p2 /system
If running off EMMC
Code:
su
mount -o rw,remount /dev/block/mmcblk0p5 /system
Hope this helps.
____________________________________________________
Sent from Nookie Froyo using Tapatalk

Everything I'm installing doesn't show up on the Extras page. If I want to open FB or Dolphin or something like that, I have to search for it.
A little help?

LongbowFoSho said:
Everything I'm installing doesn't show up on the Extras page. If I want to open FB or Dolphin or something like that, I have to search for it.
A little help?
Click to expand...
Click to collapse
Install a new launcher, such as Zeam, Launcher Pro, or ADW. I prefer Zeam myself. Then you'll be able to immediately see new apps you've installed.

Related

[Q] rooting nc 1.1 using monster root pack 7

i am new to nook color...so i did a lot of reading on this forum...i want to root nc 1.1..which is the best method for rooting nc 1.1
from whatever i have read there is two method one is auto nooter 3 and other is the pre rooted decadence rom..which one should i use..i m tilting more towards pre rooted decedence rom using monster pack .7 .
i also wanted to know if we can root 1.1 using monster pack .7 . it mentions that it is 1.1 compatible but it seems no one has tested it. i m noob to this forum and nc ..so i m sorry if i have offended some one with the above newbie questions..
I just went from ROM 1.1 stock to 1.1 rooted with Monster Pack .7. Works like a charm. Thanks IOMonster!
I just used it on a stock 1.1 Nook Color and it worked great, also installed Gapps just fine and logged into my google account fine. Everything is working on my Nook except the B&N 'Shop' from the main B&N home menu. It starts to load then goes black and nothing is there.
fpga_guy is also having the same problem...is the problem related to monster pack 7 or its a general problem???
mlovesu said:
fpga_guy is also having the same problem...is the problem related to monster pack 7 or its a general problem???
Click to expand...
Click to collapse
I'm not sure, lotta stuff to read on this forum. But I ended up just putting it back to a stock 1.0.1 Nook like it was when I bought it. So it's all back to normal now. It might have something to do with B&N registration, although mine was registered before I rooted and flashed, which is how it's supposed be.
Your registration with B&N may have gotten stale. You can post in the Monster Root Pack thread in devl forum and see what folks are saying.
Riley76 said:
I just used it on a stock 1.1 Nook Color and it worked great, also installed Gapps just fine and logged into my google account fine. Everything is working on my Nook except the B&N 'Shop' from the main B&N home menu. It starts to load then goes black and nothing is there.
Click to expand...
Click to collapse
I rooted with MRP, and also had the broken shop issue. As an experiment, last night I rerooted with autonooter - directly over the already done root, no format, no wipe. (I have a backup in case doing this is dumb, natch.)
Now the shop works.
However, the original MRP device supported the Nook standalone app and the autonooted device (this one, and one which was only autonooted, never MRP'ed) do not support the Nook standalone app.
I strongly prefer the real app. The night mode is actually black, not grey, it more consistently remembers where I left off reading, and deleting a book from the bloody library actually works in the real app. It does not work in the stock library app, and the library app frequently forgets where I was reading when I get back into it.
I'll probably restore from backup this evening - there's too much very good stuff in the real nook app to give up. It is very difficult to get the shop to let you search in that app, but recalibrating the touchscreen makes it more likely that you'll be able to. Since search on the device is so weak in the shop, I'm ready to give it up for the better night mode, the better remembering where I left off, and the vastly better file curation.
roustabout said:
I rooted with MRP, and also had the broken shop issue. As an experiment, last night I rerooted with autonooter - directly over the already done root, no format, no wipe. (I have a backup in case doing this is dumb, natch.)
Now the shop works.
...
Click to expand...
Click to collapse
I used MRP because I couldn't get autonooter to work, and so I'm in the no-shop state. I can download free apps (angry birds, of course), although I haven't tried to buy any.
Also, gmail has trouble with my email; I get lots of instances when it goes back to the index after displaying a message for a little while, and for some messages this happens before displaying anything. Is this a FC?
Softkeys also seems to be in a somewhat confused state; I don't quite understand what it's trying to do (well, I know it's creating onscreen buttons or remapping vol+- to replace the hard buttons on most phones, but that's my limit). I often get a popup saying that it couldn't do the task as su; is there some softkeys or su doc I haven't found yet?
However, I'm confused. The autonooter image only contains /boot; where does everything else come from? Does it download everything else from the PC, and that's why you have to plug into a PC?
Hmm.. I don't have SDK/ADK installed (and so no adb), is this why autonooter failed for me?
Please bear with me, I'm a long-time command-line unix/linux user, new to android. I've been using the MRP SD card to install zips, so if there's a flashable zip that fixes this, or an image that I can raid (sudo mount -o loop ...), I'm all set. If it's an adb hack, I'm out of luck for a while.
OK, I'll stop typing now...
Thanks!
Dennis
stolenmoment said:
Softkeys also seems to be in a somewhat confused state; I don't quite understand what it's trying to do (well, I know it's creating onscreen buttons or remapping vol+- to replace the hard buttons on most phones, but that's my limit). I often get a popup saying that it couldn't do the task as su; is there some softkeys or su doc I haven't found yet?
Click to expand...
Click to collapse
Softkeys is much better now; I like it a lot more. I managed to get it to pop up a root attempt and allowed it, so it works.
Still no joy on the shop front; the non-gmail email app might be better, at least for me, but I do wish that it had collapsible folders. My folder tree is > 20 years old and rather, umm, organic.
Cheers!
Dennis
stolenmoment said:
Still no joy on the shop front; the non-gmail email app might be better, at least for me...
Click to expand...
Click to collapse
I realized last night that whenever I try to visit an https: website (gmail, google/contacts, www.401k.com) the browser FCs on me.
Oddly enough, accessing gmail works just fine, so security bits appear to be different and only one of them is broken.
Does this happen to others?
Dennis
Autonooter 3.0 is great. It produces a Nook Color with full B&N functionality (the stock reader, including magazines and read-to-me kids books, the in-store browsing) that you can also install apps from the Android Market (and Amazon app store) on.
For me, right now, this is "good enough." When B&N releases its update, I'm going to wait for a pre-rooted package here before upgrading.
The reason I probably won't do anything crazy (like go full CM7) is that I'll probably buy a purpose built Honeycomb tablet for that once the market matures and prices come down.
Riley76 said:
I just used it on a stock 1.1 Nook Color and it worked great, also installed Gapps just fine and logged into my google account fine. Everything is working on my Nook except the B&N 'Shop' from the main B&N home menu. It starts to load then goes black and nothing is there.
Click to expand...
Click to collapse
I was in the same state. Following a suggestion from another thread <http://forum.xda-developers.com/showthread.php?t=1005975>, I applied autonooter-3.0.0 to my MRP'd NC 1.1.0, and all is well! AFAICT, you can ignore the instructions for after the reboot, it didn't act like a fresh NC at all.
BTW, not only did the shop FC, the browser couldn't load any https: pages, either. Are you in this situation?
Good luck!
Dennis

[Q] Honeycomb Froyo or Stock?

Ive done a little bit of searching and cant seem to find a thread about this (im sure there is one but i cant find it) so my question is which of the three do you like? i know there are pros and cons to all of them but i dont really know what to go with. any suggestions?
Dragracekid said:
Ive done a little bit of searching and cant seem to find a thread about this (im sure there is one but i cant find it) so my question is which of the three do you like? i know there are pros and cons to all of them but i dont really know what to go with. any suggestions?
Click to expand...
Click to collapse
For me, rooted stock was definitely the easiest. It's the easiest to get working. For me' froyo was still not completely usable as it doesn't include Gapps and it's kinda funky getting them on there. Then nothing really works on honeycomb (and by that I mean downloaded apps) so if you just want to browse the interwebs that's the one for you. Froyo is if you want everything Android offers, but you better know what you"re doing. So IMO stock is the easiest and the prettiest, with honeycomb being second, and Froyo being third.
I can't speak to Froyo, but I've got the HC v04 preview running on eMMC (not SD card), and for me it is very stable.
I've got access to the market, apps seem to install fine (haven't had one fail yet, but I hear some do), and B&N works great.
Even better, the kernal included in the package I used was already OC'd to 1.1Mhz, and I'm consistently getting 1,500 to 1,600 on Quadrant.
Much better performance than I was getting on my stock Nook.
It's not perfect, and I've had to do a few tweaks (found on this site) in order to get the market working, and adhock wireless networks to show up...but for me the total install was really smooth.
The only problem I currently have is that I cannot get applications to transfer from eMMC to my SD card, so I'm running out of space to install more apps.
No way would I go back to stock...what I've got now works really well for everyday use, and will only get netter once Honeycomb goes GA.
If you do decide to "upgrade" your stock Nook, just remember that it's not a "sure deal", and that there are no guarantees things will work. While I haven't had to do so, I understand that restoring your Nook to stock is a bit of a chore, so make sure you read the "back to stock" threads before you decide to modify your Nook.
If you do decide to go with either Froyo or HC...just remember to follow instructions exactly!
DeadlyDa said:
I can't speak to Froyo, but I've got the HC v04 preview running on eMMC (not SD card), and for me it is very stable.
I've got access to the market, apps seem to install fine (haven't had one fail yet, but I hear some do), and B&N works great.
Even better, the kernal included in the package I used was already OC'd to 1.1Mhz, and I'm consistently getting 1,500 to 1,600 on Quadrant.
Much better performance than I was getting on my stock Nook.
It's not perfect, and I've had to do a few tweaks (found on this site) in order to get the market working, and adhock wireless networks to show up...but for me the total install was really smooth.
The only problem I currently have is that I cannot get applications to transfer from eMMC to my SD card, so I'm running out of space to install more apps.
No way would I go back to stock...what I've got now works really well for everyday use, and will only get netter once Honeycomb goes GA.
If you do decide to "upgrade" your stock Nook, just remember that it's not a "sure deal", and that there are no guarantees things will work. While I haven't had to do so, I understand that restoring your Nook to stock is a bit of a chore, so make sure you read the "back to stock" threads before you decide to modify your Nook.
If you do decide to go with either Froyo or HC...just remember to follow instructions exactly!
Click to expand...
Click to collapse
yo, deadly, chill down a bit...nook is very hard to brick and destroy..
Since OP is here, on XDA, I suppose he knows enough to continue...
It is not so hard, trust me, pick one and try, you can start witk stock rooted...Then you will find annoying the way apps are starting, or eclair itself...So, you go and try froyo (on emmc, ofcourse), which is the closest thing to phone froyo feeling, and you'll use it happily until...One day you decide to try something new, and that would be HC...
DeadlyDa said:
I can't speak to Froyo, but I've got the HC v04 preview running on eMMC (not SD card), and for me it is very stable.
I've got access to the market, apps seem to install fine (haven't had one fail yet, but I hear some do), and B&N works great.
Even better, the kernal included in the package I used was already OC'd to 1.1Mhz, and I'm consistently getting 1,500 to 1,600 on Quadrant.
Much better performance than I was getting on my stock Nook.
It's not perfect, and I've had to do a few tweaks (found on this site) in order to get the market working, and adhock wireless networks to show up...but for me the total install was really smooth.
The only problem I currently have is that I cannot get applications to transfer from eMMC to my SD card, so I'm running out of space to install more apps.
No way would I go back to stock...what I've got now works really well for everyday use, and will only get netter once Honeycomb goes GA.
If you do decide to "upgrade" your stock Nook, just remember that it's not a "sure deal", and that there are no guarantees things will work. While I haven't had to do so, I understand that restoring your Nook to stock is a bit of a chore, so make sure you read the "back to stock" threads before you decide to modify your Nook.
If you do decide to go with either Froyo or HC...just remember to follow instructions exactly!
Click to expand...
Click to collapse
Out of curiosity, what do you mean that B&N works great? Are you just talking about the Nook app from the market, or the stock B&N apps that come with the Nook when you first get it. I was under the assumption that those would be lost with any install of Honeycomb or Froyo, which has kept me from making that jump.
im leaning toward HC cuz i dont mind difficult because i enjoy doing this kind of stuff but my worry is widgets and a few apps has anyone used circle launcher or gbcoid or gameboid or any other emulator on this?
edit: also any luck on videos working? like rockplayer or yxplayer?
Rockplayer works well , NESoid works well, gonnna try pSX tonight.
Honey 4 on emmc.
@deadly read thru the emmc thread, the answer is there. Root explorer change permissions.
Dragracekid said:
im leaning toward HC cuz i dont mind difficult because i enjoy doing this kind of stuff but my worry is widgets and a few apps has anyone used circle launcher or gbcoid or gameboid or any other emulator on this?
edit: also any luck on videos working? like rockplayer or yxplayer?
Click to expand...
Click to collapse
As far as I know none of the alternate builds currently support hardware-accelerated video playback, so your only real option for smooth fullscreen video is the (rooted or not) B&N Nook image. If anyone has gotten this working on a different build please let us know.
Honeycomb has a few issues, for example accelerometer input being rotated 90% in some games, and occasionally tiny hard-to-read onscreen text since it's configured for a non-native pixel density to fit the 1280x800 UI on the Nook's smaller screen. It's fun for testing and ok as a daily environment if your important apps all happen to work, but you should expect things to break.
By "B&N works great", I meant that I'm running the B&N reader from the market. Personally I like it better than the stock Nook reader.
@djurkash: As you say, "It's not so hard...", I was up and running in an hour or so. Sorry if you felt I was trying to scare anyone away. I really like what I've got...but I have also noted a bit of "HC mania", and not everyone bothers to RTFM. If someone reads through this site, and feels comfortable with the process...I hope they go for it! I'm glad I did.
@jonrobertd: I'd read through the emmc thread, and didn't see anything that addressed moving apps. I just went back through and searched on "Root Explorer" and "permissions", but didn't see anything that looked like it would help. I'm probably missing something obvious, but any assistance you could offer would be greatly appreciated (I do have Root Explorer installed and working).
jonrobertd said:
Rockplayer works well , NESoid works well, gonnna try pSX tonight.
Honey 4 on emmc.
Click to expand...
Click to collapse
@jonrobertd, I just tried Rockplayer on HC v4 off SD (not overclocked), it runs at 12-15fps according to its built-in counter for original size, a bit slower for fullscreen video ([email protected], baseline H264 from Handbrake). Is that significantly better with the overclocked version? Currently it's usable but looks noticeably jerky. Of course, dual-booting to use the stock player would be a fallback option.
I have only had my nook now for 4 days so I am in no way going to put down any build. But from a new users opinion I have installed and messed with all three releases (stock rooted) (froyo) (honeycomb) And I LOVED honeycomb.
I was happy with it for a short time though due to no flash. Youtube app was a no go and the web youtube worked but was whacky.
I then went back to stock rooted and put on ADW ex. Everything just works! I am completely happy with stock running ADW until honeycomb gets more refined.
And I cant wait for that to happen because it looks very nice and is a much better user experience on the nook.
Rockplayer is much better off of eMMC and overclocked. As to running HC off SD I
can see it being slower, as the card speeds can vary.
For root explorer, I am using version 2.13.3 it works to give R/W permissions. (PM me if needed)
Apps installing to SD, use the following:
Also I follow Samuelhaff's advice and change the permissions on newsf_msdos on the /system/bin and now almost all applications install with few fails. I did it a risky way though, since I don't have ADB access I just rightclicked the file with Root Explorer, chose permissions and click in all 9 boxes, worked for me but it may be risky.
Doing this gave the me option to move to SD. I have ADB working, was just on the nook so I did it with R.E. and it worked.
If you need any more help pm me or ask here.
I have used all three (rooted stock, Nookie Froyo, and Honeycomb v4), and I am currently using a dual boot setup with stock on eMMC and NF on a microSD card. I am using rookie1's awesome multi-u-boot which allows me to choose to boot from either the SD or the eMMC at startup by pressing the home button. Stock is good for daily use, and NF is good for more cutting-edge stuff (Flash being one example). I'll probably use Honeycomb once the biggest bugs are ironed out, which will probably be after HC goes AOSP. In any case, the Nook Color has three great operating systems that you can choose from. It can't hurt to try, even if you decide to burn to eMMC instead of running off an SDcard the Nook Color is [very] hard to brick.
I just installed Sam's custom HC for emmc last night and I have to say that this is my favorite of the three options. It runs much smoother than I expected. Overall, I was not a big fan of froyo, the performance for the most part was great but I always had touch issues and keyboard lag.
1.) Sam's custom HC v4
2.) Rooted Stock 1.1
3.) Nookie Froyo emmc
I like the stock rom better, easier to root too. I've tried the HC on SD works fine but harder to setup for new nookies
i went ahead and went with HC last night and it is great so smooth and so clean the lock screen alone is just so nice, although i wish it had flash and rock player plays really choppy on my .avi anime but thats ok i can watch it on my phone. thanx guys for all you help and suggestions anyone that wants to post suggestions please do im sure there are people just like me looking for the awnsers this topic can provide
I've had my NC for a few weeks now am itching to try Froyo or Honeycomb. Something that is important to me though is the Readtome childrens books. My 3 year old really likes them. Does the market B&N appt work with these books? If not, is there a way to still use them on either Froyo or Hobeycomb (HC preferred)?
Sent from my GT-I9000 using XDA App
As far as I can tell the Read To Me books only work on the app on the NC. But that's no reason not to try Froyo or HC. Just try one of the SD image versions. That's what I've been doing. Booting off SD doesn't affect whatever you have loaded on the internal memory. Going back to the B&N stock ROM is just as simple as powering down your NC, popping out the bootable SD card, popping back in your regular SD card (if you have one) and powering the NC back on.
fugitoid said:
As far as I can tell the Read To Me books only work on the app on the NC. But that's no reason not to try Froyo or HC. Just try one of the SD image versions. That's what I've been doing. Booting off SD doesn't affect whatever you have loaded on the internal memory. Going back to the B&N stock ROM is just as simple as powering down your NC, popping out the bootable SD card, popping back in your regular SD card (if you have one) and powering the NC back on.
Click to expand...
Click to collapse
I did not know you can do that with the SD card. Im going to see about doing that when I get home. Thanks.
Sent from my Samsung Captivate running Phoenix

New to NC, not to technology. Advice needed.

Forgive me for the intrusion, but I have a question for you all. Looking at the various threads and screen shots, it appears that most are using a rooted nook rather than honeycomb or froyo; is this accurate?
My story:
I was in Best-buy the other day shopping tablets (Xoom, Galaxy, iPad, etc) and someone was walking by and said "Hey, save money, get a NC." Of course I was like, what? I'm no stranger to Linux, servers, and basic programming but tablets and android is uncharted territory for me. So, after this guy did some basic explaining I was like "half price, and near limitless customization? Yeah thats for me!"
So here I am, been browsing this website for a few days trying to decide how I should go about 'unlocking' my NC. Do I use some sort of root kit to just unlock the 'stock' system? Do I use 'Froyo' on a SD card? What about this honeycomb thing, should I use that?
Like I said, it appears from screenshots most people are still using the basic NC system, that has maybe just been rooted to run apps and such from the market? I'm sorry for sounding dumb, I'm really not, just not sure what route is best for me, or the best choice. I am a fast learner, I just don't want to spend weeks learning something only to realize I was learning the wrong thing for what I need.
What I've gathered so far:
Stock rooted NC - will do fine for most users. Launcher Pro, Pandora, YouTube, browsing, games, gmail, etc. What about GPS? Google Maps?
Froyo - Same as above, some cosmetic differences, bells and whistles only advantage?
Honeycomb - Culmination of the previous two lists?
Insight welcome please?
Signed,
Work in progress.
It may be a little over half the price... But the Nook color is half the speed of the Motorola Xoom. So if you really have the money, I would return the nook color and just get a xoom, you'll be happier with it. If you're looking for just something to surf the net, and play a few games or programs, then the NC is a decent choice.
I use CM7 nightlys. CM7 is in my opinion the best rom, it allows bluetooth support and flash. It can be overclocked to 1190mhz. And has a lot of options for customizations.
HC is limited to a preview sdk build until google decides to let others have the final source, which could be a while... (Motorola Xoom comes with it installed)
Froyo is limited in a lot of regards, and CM7 is far better and offers a lot more support for programs and hardware. That said... Some people feel Froyo is better than CM7, but they're essentially the same underlining OS.
Individuals requirements vary, but since you asked I will give my two cents:
CyanogenMod 7
While it is currently not released as "stable" but only nightly builds, the nightlies are extremely good. Phiremod is based on the nightlies and adds some nice stuff, but is also slightly behind since the nightly has to be released before it can be customized.
The latest is CM7 nightly 32 right now (http://download.cyanogenmod.com/?type=nightly&device=encore) but it changes almost every day.
A Video Test build was just released that has YouTube working in all its glory (? Did I really type that?) so the video issues should be a thing of the past in a few days. http://forum.xda-developers.com/showthread.php?t=960537
The same dev has an overclock kernel which gets the cpu up to 1100mhz and adds the interactive governor- http://forum.xda-developers.com/showthread.php?t=925451
And another guy took a great idea and ran with it: adding Tablet Tweaks to CM
http://forum.xda-developers.com/showthread.php?t=1002000
I generally run the latest nightly with an oc kernel but now that the Tablet Tweaks has made so much progress, my routine is like this:
Flash latest nightly
Flash Tablet Tweaks
Flash OC kernel
Don't let the "nightly" status of CM7 put you off too much- the CyanogenMod team are perfectionists and won't call a rom Stable until it is PERFECT.
Right now the nightlies are better than any fresh install of Windows I have ever seen, for example....
I wouldn't go to honeycomb as a permanent solution now - it is reasonably good but still experimental with problems running full tablet applications.
I'm using Froyo but will switch over to CM7 shortly. At one point, froyo was more stable (two weeks back - things change fast) with working video and flash. CM7 has come along quickly and its time to move on. Having said that - both of these require some fiddling to get working properly. This is not a no-frustration experience - if you are comfortable with sorting out linux-like issues it won't be too bad. Fun if you like tinkering with gadgets.
Rooted stock is stable, adds the open android market to the the stock B&N experience which includes a very nice reader. If you upgrade beyond stock you will lose the reader which has some desireable features like "borrowing a book" in the store, magazines and newspapers. Not working on froyo, cm7, or hc.
I'd agree that cm7 is probably the best compromise at this point - at least for me. You will still be flashing gapps and wondering where certain apps or wallpapers are in the market.
Xoom or galaxy tab actually work (largely) without customization today. Closer to an ipad experience in that it works out of the box. Nook color can largely replicate those functions but you'll do a little work setting it up.
Peter
I would not trade the NC for the Xoom just because the Xoom is so ridiculously overpriced IMO. Personally, I would go with stock rooted. If you find that you are wanting to do something with it that you cannot do on stock rooted, then look for something else like Nookie Froyo or Honeycomb (which is still a little half baked on the NC IMO).
Wonderful advice and well said. Thank you much for everyone's time, I above anyone else know how precious every second is.
'Sorting out linux and tinkering' is exactly on point, I've been doing that very thing for about 12 years now. I like to consider myself an avid enthusiast rather than full throttle geek. Anyway, I think I'll study the route of stock rooted and further my knowledge on full flash before taking that plunge.
That being said, one more question and I'll let you all get back to more important things. I should be right in assuming just follow the steps in this thread http://forum.xda-developers.com/showthread.php?t=872490 or the v3.* thread to fully root the stock NC and have google apps, market, etc up and running? From what I've read, this auto-nooter has pretty much all of it built in already; Gmail, Market, root-kit etc.
PS: Wonderful site, very informative.
Signed,
Work in Progress.
LarcenQ said:
Stock rooted NC - will do fine for most users. Launcher Pro, Pandora, YouTube, browsing, games, gmail, etc. What about GPS? Google Maps?
Froyo - Same as above, some cosmetic differences, bells and whistles only advantage?
Honeycomb - Culmination of the previous two lists?
Click to expand...
Click to collapse
I'm in your same boat (I recently started with Nookie Froyo on SD so I can leave the Nook alone, but am just learning what else needs to be done to fix some buggy behavior.)
One thing to understand is that there are multiple versions of Android. The Nook Color still ships with Android 2.1 (Eclair). They are supposed to be pushing out 2.2 (Froyo) in a few days. The Cyanogenmod (CM7) people are using 2.3 (Gingerbread). And the NookieFroyo folks are of course using 2.2. I have no idea what Phiremod is. As expected, the later versions of Android tend to have more features/work better.
The 3.0 version of Android, Honeycomb, is still the most experimental and apparently doesn't work that well with the Nook Color yet. Worse, Google has decided to hold back the latest source code of this "open source" project for now, meaning that only the Xoom can run the thing. But it's the only Android version with true tablet support.
As to GPS,the Nook Color does NOT have a GPS chip, so regardless of Android version you can get GPS coordinates only by rough calculation based on a WiFi database or by tethering to a GPS device or GPS-equipped cell phone.
xdabr said:
I have no idea what Phiremod is.
Click to expand...
Click to collapse
Phiremod is based on CM7 nightlies with some very nice customizations.
Yup -- Xoom overpriced. Unless you've a burning desire to be on the cutting edge, I'd go with the Nook Color and wait out the pricing on Android tablets. They are bound to come down.
Also, a couple of key points:
Barnes & Noble is theoretically going to push an upgrade sometime in April that will include Flash capability and some sort of Market. No details on the market. However if they're smart there will be a host of apps available that we all know will run on the Nook (because we've rooted and downloaded them). This new stock configuration may be all that a lot of people want or need.
If you are determined, however, remember that this forum is like a big toy store and can be confusing. You can run stock internally and dual boot into a fast SD card to run virtually any other configuration. Or, you can flash the internal rom and run most of these variation on the OS internally.
Here's the relevant point: When booting, the Nook Color looks first at the SD drive. That's very cool, because it allows us to do a whole bunch of fun stuff.
I'm currently running rooted stock internally and CM7 (the version with working Bluetooth) off a SD card. Truth be told I typically boot into CM7 because it works so well -- even for reading B&N Nook books. I use a little variation that allows hard key dual booting. There is a brandy new release of CM7 that resolves some video issues and I'll update to that.
However, the CM7 releases do not include the Google stuff, including the Market, so you have to load those via ADB (Android Development Bridge) which means setting up your computer with an Android development environment -- something very doable and free, but it takes some time to get it all working right.
The holy grail is probably Honeycomb, the Android version specifically designed with tablets in mind. There is a development version of Honeycomb that actually works pretty well, but it's not fully fleshed out just yet. I've got it running on a separate SD and it's very cool, but lacks some functionality. Once it's fully developed that will be my daily OS for sure.
One of my wants and needs is to be able to use an external folding keyboard. The only version floating around right now that supports the Nook's built-in Bluetooth (unused by B&N) is a release of CM7 -- and it works. I can use the nifty Freedom Pro keyboard and it's really pretty good -- no excessive lag.
Hopefully that's enough to get you going. I'd say -- given the overwhelming wealth of information on this forum -- keep your Nook stock until after B&N pushes the update. In the meantime, get a good fast SD card and use that to mess with your pick of Android versions offered here. Pick just one and than tunnel down into the forum to work with it at first.
Happy Nooking!
robedney said:
I'm currently running rooted stock internally and CM7 (the version with working Bluetooth) off a SD card.
Click to expand...
Click to collapse
Thank you! I wanted to try this CM7 tonight when I got home, however, I do not want to wipe/tamper with my onboard nook, and everything I've read about CM7 you have to install on internal memory. Is there a link to the instructions on booting CM7 from the sd card?
Thanks in advance!
Signed,
Getting somewhere.
Yup -- I'll track it down. Stay tuned.
Here's a thread that sets up a SD card to run CM7 with working Bluetooth. Read the whole thread before you start (some good simple instructions are in there):
http://forum.xda-developers.com/showthread.php?t=989637
Be aware that Google stuff and the Market are not included -- you'll have to install those via ADB (and there are full instructions on how to set up and do that on this forum.
Or -- a newer option that looks pretty cool (and avoids having to use ADB to get the Market):
http://forum.xda-developers.com/showthread.php?t=1000957
I think I'll try this on a spare SD card and see how it all works out.
There are hardware differences to consider too.
NC is 7 inch screen, vs 10 inch for XOOM and some other tablet.
Then size and weight.
Also NC doesn't have cameras, the others may have one or two...
And NC doesn't have mic, although bluetooth headset may work.
I am happy with my NC for its price and what I need.
robedney said:
Here's a thread that sets up a SD card to run CM7 with working Bluetooth. Read the whole thread before you start (some good simple instructions are in there):
http://forum.xda-developers.com/showthread.php?t=989637
Be aware that Google stuff and the Market are not included -- you'll have to install those via ADB (and there are full instructions on how to set up and do that on this forum.
Or -- a newer option that looks pretty cool (and avoids having to use ADB to get the Market):
http://forum.xda-developers.com/show....php?t=1000957
I think I'll try this on a spare SD card and see how it all works out.
Click to expand...
Click to collapse
Much obliged! I'll give this a try tonight once I get home from work. God I love mature people instead of 'scr3w yu n00b!'.
Signed,
Getting there.
Just make your of which Stock ROM you have (1.0.0, 1.0.1, 1.1.0). Each Nooter is made specifically for each ROM.
Also, as far as Gapps is concerned, there is no need to use ADB. All of it can be installed easily via ClockworkRecovery. ADB stuff is fun, but not needed to get full blown CM7 w/gapps and everything else.
http://forum.xda-developers.com/archive/index.php/t-1000957.html
just used this for a SD bootable CM7. I'm running rooted 2.1 for daily use and testing out the different options via SD bootable builds. fyi, this also allows the install of google apps without ADB.
HI,
One question for you:
What do you want to use the Nook for mainly?
Toy/Playing/learning/Android Apps/Web/eBooks... CM7 (Nightlies)
eBook reader mainly... Perhaps stock rooted.
Lots of video/Flash? Not sure which, perhaps Froyo. CM7 soon.
Require bluetooth? CM7
One immediate advantage for rooting is access to other eBook reader
applications, such as Kindle.
Don't forget to look at/select a soft button approach that you like,
Android is expecting more than the one button at the bottom. I like
Button Savior from the market, but there are a variety of other solutions.
It is handy to have a bunch of SDcards on hand too, I never seem to have
enough of them. Don't forget that when you move to an internal memory
version of, say, Cyanogenmod7, that you need a SD card for data too.
Good luck, the NC is a fun toy!
Peter
envygreen said:
http://forum.xda-developers.com/archive/index.php/t-1000957.html
just used this for a SD bootable CM7. I'm running rooted 2.1 for daily use and testing out the different options via SD bootable builds. fyi, this also allows the install of google apps without ADB.
Click to expand...
Click to collapse
We're in dire need of a single (maintained) collection of all these pre-built SD card images -- is there such a posting?
Hunting through the forum is not as much fun as it seems.
EDIT: Looks like there's a list of ROMs at http://forum.xda-developers.com/showthread.php?t=872003
DOH!
Read post carefully BEFORE replying!
lol

[Q] Rooted Nook Noob General Questions

Hi All,
First post! I just got a Nook Color from the Overstock sale and bought two as gifts for my mom and gf. I figured I'll learn all the tricks and how-to's on mine and be able to help them Christmas day. So far, I got myself a SanDisk 16GB Class 4, followed koopakid's awesome tutorial and have successfully installed the latest RC version of CM7. I ran into a bit of trouble getting the Google Apps to install, (just wound up manually adding Gmail from marketplace), and am really happy. But I have a few questions from where to go from here...
After getting CM7 off the SD card, how can I add files to the additional 15GB or so of unused data? And is it possible to do so without constantly removing my card?
I thought I read somewhere to "lock your screen" or something to prevent lag, but what does that mean?
Is it possible to download an app on my PC and install it to the Nook?
What's the best app/settings to tweak a rooted Nook?
I don't mean to be "that guy", but I didn't see a general help thing and don't understand some of the stuff I was reading earlier. Any help and advice is appreciated!
DlickSeals said:
After getting CM7 off the SD card, how can I add files to the additional 15GB or so of unused data? And is it possible to do so without constantly removing my card?
Click to expand...
Click to collapse
Yes, just plug your Nook into your computer via USB and then select the option in your status bar to mount as USB. It should pop up on your computer as 2 different drives one for your SD card and one for EEMC.
[*]I thought I read somewhere to "lock your screen" or something to prevent lag, but what does that mean?
Click to expand...
Click to collapse
Hmm, never heard of this and I have no idea what it means.
[*]Is it possible to download an app on my PC and install it to the Nook?
Click to expand...
Click to collapse
Yes, just download the apk file and then either transfer it over and use a file explorer to install or just email it to yourself/use dropbox.
[*]What's the best app/settings to tweak a rooted Nook?
Click to expand...
Click to collapse
I'm not really sure what you want here but I would suggest getting a new browser such as Opera or Dolphin first. Another good app to have is Nook Screen Recalibrate for when your screen get a little wonky.
For reading I use Aldiko.
For watch videos I use Mobo Player
And if you haven't yet download tge Amazon Appstore for a free app every day.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Thank you KK! I'm definitely going to trying moving stuff on there once I get home! So far, the only thing I did was go through the Android Marketplace to get the Dolphin Browser earlier, but was hesitant on any of the other apps like e-Reader stuff, (heard great things about Aldiko), music, and videos.
As far as that lock screen, I have to find that post. It know it mentioned something about the screen behaving laggy or something if not locked when putting it down. That or I could be way off and misread it.
One last question: I got 2 more Nooks as presents and don't want to open them, but would it be possible to follow the same basic install using SD on my Nook and simply including those pre-made cards in the unopened Nooks or does this stuff have to be done Nook by Nook so to speak?
DlickSeals said:
Thank you KK! I'm definitely going to trying moving stuff on there once I get home! So far, the only thing I did was go through the Android Marketplace to get the Dolphin Browser earlier, but was hesitant on any of the other apps like e-Reader stuff, (heard great things about Aldiko), music, and videos.
As far as that lock screen, I have to find that post. It know it mentioned something about the screen behaving laggy or something if not locked when putting it down. That or I could be way off and misread it.
One last question: I got 2 more Nooks as presents and don't want to open them, but would it be possible to follow the same basic install using SD on my Nook and simply including those pre-made cards in the unopened Nooks or does this stuff have to be done Nook by Nook so to speak?
Click to expand...
Click to collapse
Yes, the cards are not specific to one Nook so you can go ahead and make them before.
Sent from my NookColor using Tapatalk
So… I went ahead and tried some tweaking. And now I think my stupid is showing.
I was browsing some apps and figured I’d give the Nook Color Tweak one a go since it’s specifically made for rooted NC’s. After I downloaded & installed it, I noticed I can’t overclock the CPU, (heard it’s stable even at 1GHz) or enable USB Host Mode (so I can drag-n-drop eBooks and app files while the NC is connected to a PC). Apparently I need the “Dalingrin's OC kernel”. And that’s where I got intimidated.
I was thinking about this and I think I’m having two “issues”: 1) I’m not sure how to continue tweaking the NC and 2) since this is my first introduction to Android, I think I need to bang through some tutorials and guides for the OS itself before getting myself overwhelmed with the NC stuff. Time to research…
DlickSeals said:
So… I went ahead and tried some tweaking. And now I think my stupid is showing.
I was browsing some apps and figured I’d give the Nook Color Tweak one a go since it’s specifically made for rooted NC’s. After I downloaded & installed it, I noticed I can’t overclock the CPU, (heard it’s stable even at 1GHz) or enable USB Host Mode (so I can drag-n-drop eBooks and app files while the NC is connected to a PC). Apparently I need the “Dalingrin's OC kernel”. And that’s where I got intimidated.
I was thinking about this and I think I’m having two “issues”: 1) I’m not sure how to continue tweaking the NC and 2) since this is my first introduction to Android, I think I need to bang through some tutorials and guides for the OS itself before getting myself overwhelmed with the NC stuff. Time to research…
Click to expand...
Click to collapse
First off what CM version are you using? Dal's overclock kernel is included in the latest 7.1 stable.
Also, USB host mode is not dragging and dropping enabling its for connecting USB devices like flash drives to the Nook. To enable dragging and dropping on your computer just plug it in via USB and then select the option to mount as USB.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Where is the icon for me slamming my head agains the wall? Or wearing a dunce cap? That's not at all what I was thinking the USB mount thing meant. I.D.I.O.T.
As far as the Kernel, I'm actually using the RC 7.1 from the instructions. Everything I read mentioned that it was included which is a large part of why I'm a bit confused on that stuff.
DlickSeals said:
Where is the icon for me slamming my head agains the wall? Or wearing a dunce cap? That's not at all what I was thinking the USB mount thing meant. I.D.I.O.T.
As far as the Kernel, I'm actually using the RC 7.1 from the instructions. Everything I read mentioned that it was included which is a large part of why I'm a bit confused on that stuff.
Click to expand...
Click to collapse
I'm pretty certain that the kernel was added around nightly 150 whitch is after the RC release. Updating is a pretty simple procedure.
Sent from my NookColor using Tapatalk
Thanks KK! I did some searching for a nightly and how to flash, but I'm actually thinking about just starting from scratch if only for reference. Since I'm giving 2 as gifts this Christmas, I'd like to have a little handy document & files on a thumbdrive I can follow and get this going. I'm thinking about starting from scratch with a nightly in place of a RC and going from there.
Now I just need to figure a PDF reader that allows me to pinch-zoom.
DlickSeals said:
Thanks KK! I did some searching for a nightly and how to flash, but I'm actually thinking about just starting from scratch if only for reference. Since I'm giving 2 as gifts this Christmas, I'd like to have a little handy document & files on a thumbdrive I can follow and get this going. I'm thinking about starting from scratch with a nightly in place of a RC and going from there.
Now I just need to figure a PDF reader that allows me to pinch-zoom.
Click to expand...
Click to collapse
EZ PDF reader is what I use.
Sent from my NookColor using Tapatalk

[Q] Need some recommendations...

Hi all,
My wife just got a Nook Color for Christmas and I'm itching to root it. Both of our OG evos are rooted and I'm fairly competent with customizing the ever living crap out of them (I'm running MIUI and love it).
I'm looking for suggestions for a cool but most importantly STABLE setup for her nook color. I see there aren't as many options as the Evo, and the rooting process seems a bit more involved, but I'm sure I can figure that part out.
I already ran the 1.41 update and read all of the basic steps for root. She doesn't want to lose the B&N functionality (not sure why), so is my best bet just to root it with a bootable SD without loading CWM recovery? Using manualnooter that would just leave her with the B&N functions but would also install an alternate launcher and allow her to install android market and 3rd party apps, correct?
I've done quite a bit of reading up but I just want to get some opinions...she's afraid I'm going to "mess it up" like I've done to my evo quite a few times, but its never been anything a clean wipe can't fix so I don't see the issue haha.
Thanks everyone!
Your best bet is CM7.1 on a SD card. Just make sure that's an SanDisk Class 4 card, otherwise the performance will be quite miserable. Just grep the CM7.1 zip, the latest gapps-gb zip and greens sd installer and do it. You will be done in 15 min and you will never go back. I got my NC also for x-mas and used CM7.1 on a SD card for 2 days before I installed it on the internal memory (emmc).
ss12108 said:
[...] I already ran the 1.41 update and read all of the basic steps for root. She doesn't want to lose the B&N functionality (not sure why), so is my best bet just to root it with a bootable SD without loading CWM recovery?
Click to expand...
Click to collapse
I've rooted 1.4.1 on my Nook Color and blocked further updates. It's provides what I refer to as the "B&N Walled Garden (with a gate)". It's straight B&N in terms of functionality, and all the B&N functions (subscriptions, Conde Nast mags and enhanced books,free read-in-store) work fine. If she intends to use any of the B&N content, it's a nice experience. If she doesn't, then, frankly, you can do a lot more a lot more easily with Cyanogenmod loaded on it.
Using manualnooter that would just leave her with the B&N functions but would also install an alternate launcher and allow her to install android market and 3rd party apps, correct?
Click to expand...
Click to collapse
If you root the B&N software, yes.
Alternately, you could load Cyanogenmod either internally on eMMC (replacing B&N), or externally, in a dual-boot SD configuration, which would let you leave the BN setup stock or rooted. The two remain completely separate from each other.
I've done quite a bit of reading up but I just want to get some opinions...she's afraid I'm going to "mess it up" like I've done to my evo quite a few times, but its never been anything a clean wipe can't fix so I don't see the issue haha.
Click to expand...
Click to collapse
The NC is pretty bullet-proof. If you decide to root B&N firmware, be sure to block automatic OTA updates, or it will self-destruct when they push an update, and it will be your fault, buster!
I've rooted my wife's new Nook Tablet, and she's quite enamored with it. Adding functionality from the Market has been a big plus, and I've got her music synchronized with our Google TV setup as well.
Thanks both of you. I went the route of booting CM7 from the SD card and it was actually really easy and runs pretty flawlessly. Unfortunately my wife is a pain and doesn't seem to appreciate how much better it is so she just sticks with the stock stuff 99% of the time haha. I might have to get my own now just out of principle!
Sent from my PC36100 using XDA App
You can always add a few Market apps to her mostly-stock setup with the Nook Color App Manager. I used it to add a few apps to my wife's rooted Nook Tablet. If I hadn't told her, she'd have thought those were stock apps.
But yeah, definitely get your own!
bobstro said:
I've rooted 1.4.1 on my Nook Color and blocked further updates.
Click to expand...
Click to collapse
How did you block updates? I've seen several mentions about doing this but nothing definitive. Thanks!
zogg44 said:
How did you block updates? I've seen several mentions about doing this but nothing definitive. Thanks!
Click to expand...
Click to collapse
I edited devicemanager.db using SQLite. Open devicemanager.db and change registry->com.bn.device.fota.mode from "auto" to "manual".
That's all I've done, and no further OTA updates. There are more involved methods, but this seems to work.

Categories

Resources