I Bricked my Dell Streak 7, Please Help - Dell Streak 7

Streak 7 Stuck at Dell Logo
Formatted the System and Data and reflashed the system and boot.img files but now stuck at dell logo.
No power on key combination produces any other result.
Only have two options that I can think of.
1) Somehow boot from sd card
2) Get the nvida/tegra chipset sdk which I can't find a download for anywhere
Any other suggestions?

I posted it in the other thread
Sent from my Dell Streak 7 using XDA Premium App

thatruth132 said:
I posted it in the other thread
Sent from my Dell Streak 7 using XDA Premium App
Click to expand...
Click to collapse
Thanks, installing now. I called Dell and they are sending me a new one, but I would still like to resolve this so others don't have to do this.
Any tips on how to use this?

I am going to try the QDL tool that can be downloaded here: http://www.streakdroid.com/repairtool.zip
This may get me back up and running, we'll see. If so, I will post the procedure.
QDL is supposed to be a rom recovery utility that can communicate with the device in almost any scenario. Since ADB can see the device, I might have some luck.

Good luck
Sent from my Dell Streak 7 using XDA Premium App

illdill said:
I am going to try the QDL tool that can be downloaded here: http://www.streakdroid.com/repairtool.zip
This may get me back up and running, we'll see. If so, I will post the procedure.
QDL is supposed to be a rom recovery utility that can communicate with the device in almost any scenario. Since ADB can see the device, I might have some luck.
Click to expand...
Click to collapse
instead of going through all that just call dell.. play dumb and just say after the update you got stuck at the dell screen.. they will try to get it to boot in recovery but that wont work.. so then they will issue a warranty exchange.. and it's not a refirb they are sending.. it's the full retail package again I'm going to "forget" to send back the charger and have two.. I never send back the chargers to dell when I do a replacement.. so if they dont ***** about a $100 charger missing they wont ***** about a streak charger missing.. as a matter of fact with my old laptop I forgot to send the charger back and called them, they said "na, it's a minor part. Onky send it back if we contact you abaout it" They never did
But all this time you're doing all this.. you could have a new one on it's way to you with pretty much no questions asked.. just say you got the update.. it said it would reboot.. it rebooted and now youre stuck at the dell screen..

graffixnyc said:
instead of going through all that just call dell.. play dumb and just say after the update you got stuck at the dell screen.. they will try to get it to boot in recovery but that wont work.. so then they will issue a warranty exchange.. and it's not a refirb they are sending.. it's the full retail package again I'm going to "forget" to send back the charger and have two.. I never send back the chargers to dell when I do a replacement.. so if they dont ***** about a $100 charger missing they wont ***** about a streak charger missing.. as a matter of fact with my old laptop I forgot to send the charger back and called them, they said "na, it's a minor part. Onky send it back if we contact you abaout it" They never did
But all this time you're doing all this.. you could have a new one on it's way to you with pretty much no questions asked.. just say you got the update.. it said it would reboot.. it rebooted and now youre stuck at the dell screen..
Click to expand...
Click to collapse
but it is worth it we might find better ways of not bricking or having this happen to others

So no luck with QDL tool yet, but I did read about other devices using the method 'Volume Up + Down + plug in USB'
When I tried this my computer recognized an APX device. Will see where this gets me if I can install the propper drivers.

illdill said:
So no luck with QDL tool yet, but I did read about other devices using the method 'Volume Up + Down + plug in USB'
When I tried this my computer recognized an APX device. Will see where this gets me if I can install the propper drivers.
Click to expand...
Click to collapse
i found them but have to find where i stored them or what os i downloaded them in but once you do you can setup the in flash but i am going to tell you know i did it all and the issue i came up wit that made me give up was the bootloader.bin which you will have a hard time finding not unless one of the more talented people here can extract it for you the nvflash wont work properly it uses the the boatloader.bin to reflash the streak but i couldnt find it but i ended up getting my new one from dell after 3 or 4 days

Ok, will wait on your search...
Found a driver that would install as NVIDIA USB Boot-recovery driver. Does that sound right?
I'm also in a bit over my head. From what I understand, I need to restore the boot image on the device. The NVFlash is for flashing the hardware ROM. In what way does/will that help me? Is the hardware ROM part of the boot and system images? Or is it seperate.
Thinking in PC terms, the rom would be the motherboard drivers/software and the System and Boot files would be like installing windows... Does this make sense?
Also, what is the ROM version on the Streak 7?

QDL tool is giving me this error:
ERROR[D10]: no com port found, not in dload mode.
Another question; are the boot, & system files considered "rom's" to NVFlash? Is it a matter of changing the extension to .rom?
OR, like I was assuming earlier, is the rom a totally different file?
Anybody there? I need to understand how this stuff relates to know what to troubleshoot for?

Dear ,
i need help ; i am going crazy with my dell streak 7
i have Dell Streak 7 - T Mobile version
and i have been messing with it ; i put clockwork mod recovery
any how i tried to install the updating yesterday from the dell official update and something went wrong and i am stuck in the clockwork mod ; however i starting messing it more so i chose every wipe in the menu , and after that i i messed more so i formatted everything ( i know that am an idiot by now )
but please i have little bit ignorance in such stuff ; so please can you help me !!!!!!
i tried connecting the device to the laptop win 7 x64 ; it shows me in the device manager that i have android mobile boot mod but again it shows me that i have portable devices ; and also i messed with the sd partition issue .
so i beg u all ; anyone help ..step by step ...am sorry for the trouble

Search and read before posting I made a thread just for this
Sent from my Dell Streak 7 using XDA Premium App

Sir ,,
i swear i read more than 5 websites and i tried everything ...
i just reached to a point that my computer is not identifying the streak as fastboot and when i give the orders to flash it always give wating for device
and when i try to put the dell orginal 3 files on the external sdcard 2 and click back and restore ...nuthing happen as well ...
so please am kind of begginer in such stuff ; can u help
thank you

Read the threads there is a guide and also you cant flash a stock image with a custom recovery ....you need to search on these threads or my threads
Sent from my Dell Streak 7 using XDA Premium App

am sorry sir ,
but i didnt get '' you cant flash a stock image with a custom recovery ....you need to search on these threads or my threads'' you have to excuse my ignorance ...can you explain to me more ..
thank you

That really doesnt matter you need to read the threads some loser just "made" a rom you can flash that might help you
Sent from my Dell Streak 7 using XDA Premium App

am really sorry sir to bother you with my stupidity and my ignorance but please bare with me here ; isnt there a simple way to just flash my strea7 to orginal settings like it was 2.2 and i cant get the old normal fastmode ; note by that my streak is locked on t-mobile and i bought from amazon.com ; and i cant use the 3g cuz of that ; and this is my first time i am using andriod system ..
i tried reading alot of this but still am not getting how to do ; so again am asking is there simple steps 1- 2- 3- ..and flash your streak 7 and get it back like it was ?
sorry for inncovince ..

http://forum.xda-developers.com/showthread.php?t=1006829

Guess I'll just keep talking to myself Anyway, if anyone has some suggestions, feel free to jump in.
So I have to use nvflash in DOS mode, no problem. BUT, (how) can I install the nvidia boot-recovery drivers in DOS mode? Starting to wish I had a linux box.
I managed to answer my earlier question about the ROM and correct me if I am wrong, but the rom is several files packed together INCLUDING the system, boot, etc.
Now is this just a standard zip file? I have my CWM backup, can I zip that and give it a .rom extension?
Hey guys, I realize my situation is bad and that I am a newb, but I did want to thank you all for your help. Without these forums we would all be lost.

Related

[Q] Pattern Bypass Streak 7

basically, before you guys judge, why would i need a pattern bypass, let me get through the story.
Basically, my tenant couldnt pay her rent, so she decided to give me half and leave. when she left, she also left her dell streak. i gave her a call and she told me i can just have it. when i tried to turn it on, it wouldnt so i charged it. waited a while, say 6 hours, then when i got back to it, there was a pattern lock. called her again but unfortunately, her cell phone line got deactivated. its been 2 days, and ive been trying but no luck.
basically, i just need a program, software, anything? lol. to bypass this because i want to sell it, or maybe try to fall in love with it
*things i have tried*
[1.] Vol up + Power
~brings me to (stock??) recovery (im guessing?) with 5 choices.
0. Boot Up
1. Factory reset (User data only)
2. Software upgrade via update.pkg on SD card
3. Factory reset (User data and Internal Tablet storage)
4. Power off
~Chose #1 which failed
~Chose #3 also failed
both booted up perfectly and still showed the pattern unlock screen.
[2.] Followed a guide
~i basically treated the streak like it was bricked, so i fallowed a guide from illdill (sorry i forgot the link) but it was something related to nvflash and using it to flash images 2-21 on the dell streak 7.
~this method also failed, and also booted up perfectly.
*[3.] Try to put HoneyStreak RC 2.1*
~i get the error "Formatting partition 2 BCT please wait.. FAILED!"
idk what i means but all i know is that when i used the search button, i guess peoples who ask about it and have trouble about it, they get ignored. they try to bump, but yet no response. I read from post 427 to almost 560. none was answered. if there is a way out there. please help me ;(
only 2 methods i tried. anyone else? thanks in advance xda users. quick responses that arent usually nonsense gets a thank button clicked from me
jayjaypops said:
basically, before you guys judge, why would i need a pattern bypass, let me get through the story.
Basically, my tenant couldnt pay her rent, so she decided to give me half and leave. when she left, she also left her dell streak. i gave her a call and she told me i can just have it. when i tried to turn it on, it wouldnt so i charged it. waited a while, say 6 hours, then when i got back to it, there was a pattern lock. called him again but unfortunately, his cell phone line got deactivated. its been 2 days, and ive been trying but no luck.
basically, i just need a program, software, anything? lol. to bypass this because i want to sell it, or maybe try to fall in love with it
*things i have tried*
[1.] Vol up + Power
~brings me to (stock??) recovery (im guessing?) with 5 choices.
0. Boot Up
1. Factory reset (User data only)
2. Software upgrade via update.pkg on SD card
3. Factory reset (User data and Internal Tablet storage)
4. Power off
~Chose #1 which failed
~Chose #3 also failed
both booted up perfectly and still showed the pattern unlock screen.
[2.] Followed a guide
~i basically treated the streak like it was bricked, so i fallowed a guide from illdill (sorry i forgot the link) but it was something related to nvflash and using it to flash images 2-21 on the dell streak 7.
~this method also failed, and also booted up perfectly.
only 2 methods i tried. anyone else? thanks in advance xda users. quick responses that arent usually nonsense gets a thank button clicked from me
Click to expand...
Click to collapse
Try flashing Honeystreak (it completely erases the internal memory since it needs to repartition it) if you like Honeystreak, keep it, if you want stock, flash back. Hopefully that will work.
bluesy_92 said:
Try flashing Honeystreak (it completely erases the internal memory since it needs to repartition it) if you like Honeystreak, keep it, if you want stock, flash back. Hopefully that will work.
Click to expand...
Click to collapse
thanks for quick response, ill try and see, most of the things im reading are, i have to atleast have CWR. which i highly doubt she has. when i tried to explain to her what "rooting" means, lets just say she wasnt interested at all.
unfortunately, it didnt work. somethings about "Formatting partition 2 BCT please wait.. FAILED!" and doesnt go through, that makes method 3 = failed. unless someone out there has a different suggestion?
thanks in advance
Uh...it failed to format the partition? I don't think I've ever seen that happen.
I know this will sound stupid, since you are probably in the right forum, but where you said "streak" are you sure it was the 7 inch and not the 5? Also, you said you got into recovery by volume UP and power, but I think volume DOWN and power is stock recovery...maybe it had CWM installed by someone who has used it before? (the options sound like CWM) and in that case, someone may have changed something. Again, I'm shooting in the dark, but if it is a streak 5, or if it has CWM, it would be different than just a stock Streak 7 on the lockscreen. The streak 5 and 7 are not just different sizes of the same device - they run on a different chipset. The 5 has a snapdragon (I believe) and the 7 has a Tegra 2.
EDIT: You said Streak 7 in the title, so...I'm pretty sure you know it's a 7. In that case, I don't know why it won't flash :-/
bluesy_92 said:
Uh...it failed to format the partition? I don't think I've ever seen that happen.
I know this will sound stupid, since you are probably in the right forum, but where you said "streak" are you sure it was the 7 inch and not the 5? Also, you said you got into recovery by volume UP and power, but I think volume DOWN and power is stock recovery...maybe it had CWM installed by someone who has used it before? (the options sound like CWM) and in that case, someone may have changed something. Again, I'm shooting in the dark, but if it is a streak 5, or if it has CWM, it would be different than just a stock Streak 7 on the lockscreen. The streak 5 and 7 are not just different sizes of the same device - they run on a different chipset. The 5 has a snapdragon (I believe) and the 7 has a Tegra 2.
Click to expand...
Click to collapse
ahhh, thank you. first off, the partition, basically it looks like this (http://forum.xda-developers.com/showpost.php?p=15109690&postcount=425). i have no idea why it fails.
the only ways i could tell it "might be" a streak 7 is....
stock, Volume Up+Power is stock recovery menu. Volume Down+power is USB Fastboot. Has red letters as well.
now. is there anything visible or any button power combo where i would be able to find out if this was a dell streak 5 or 7? sorry for the nweb question.
*fyi, i know how CMW looks like, i have owned many android devices and... lets just say trust me... the Volume Up+Power looks like stock recovery and the only reason i say this is because it has 5 options, and 2 of them are Factory Reset.
Thanks again for quick response!
Other than the screen size, the capacitive buttons are layed out differently. On the streak 5, they are equally spaced, wheras the Streak 7 has them placed so that in landscape, they would all be under your thumb. The Streak 5 also has a removable battery, and the Streak 7 does not. If you check the back and it is smooth with a removable battery, it's a 5. If it is lightly textured without a removable battery, it is a 7.
Hope this helps
EDIT: And as far as the partition, I still don't know what would cause the problem. It might be best to ask someone with more NVFlash experience than me
bluesy_92 said:
Other than the screen size, the capacitive buttons are layed out differently. On the streak 5, they are equally spaced, wheras the Streak 7 has them placed so that in landscape, they would all be under your thumb. The Streak 5 also has a removable battery, and the Streak 7 does not. If you check the back and it is smooth with a removable battery, it's a 5. If it is lightly textured without a removable battery, it is a 7.
Hope this helps
EDIT: And as far as the partition, I still don't know what would cause the problem. It might be best to ask someone with more NVFlash experience than me
Click to expand...
Click to collapse
perfect bluesy_92. you've helped me so much already even thought my dell streak is still "unable to be used" now im for sure guarenteed this is a dell streak 7 (lol) since there is no removable battery and the c buttons are right under my thumb landscape wise.
as for the partition, would you help me figure out? ill sorta spam (not really) on the development thread for anyone who has nvflash experience to help me out with my streak.
as for others who click on this thread and do read and by any chance know any nvflash experience. please do help and just jump right in. thanks so much XDA community providers lets see if we can get through a bypass.
as of things to try
as of things to try in the morning when i wake up for work
the only thing im missing now is my adapter for my miniSD card to stick it in my streak and do the update.pkg file from the stock recovery menu. idk if it will bring me far because at work, i have internet access all day via phone (htc sensation) and i can try to keep update with my xda app but i have no desktop whatsoever.
jayjaypops said:
perfect bluesy_92. you've helped me so much already even thought my dell streak is still "unable to be used" now im for sure guarenteed this is a dell streak 7 (lol) since there is no removable battery and the c buttons are right under my thumb landscape wise.
as for the partition, would you help me figure out? ill sorta spam (not really) on the development thread for anyone who has nvflash experience to help me out with my streak.
as for others who click on this thread and do read and by any chance know any nvflash experience. please do help and just jump right in. thanks so much XDA community providers lets see if we can get through a bypass.
Click to expand...
Click to collapse
Well, I've heard of people getting devices that are locked in read-only, basically making them unable to be flashed. The fact that nothing is working scares me that this may be the case, but at the same time, I never experienced it, so I definately can't be sure. Someone who has may be able to tell you if you're stuck. If it is read-only, your only hope is Dell by that point :-/
That's the first thing I think you should find out. Because if it is locked in read-only, your case is pretty much closed at that point (and not in a good way, unless Dell helps you.) If you find out it's not, then I would try to figure out why Honeystreak isn't flashing properly.
You can try update.pkg - everything is worth a shot, but unlike flashing Honeystreak, I think it won't repartition or anything (updating through a .pkg is the way manufacturers release updates - it was not designed to be harmful to the users data, afaik) so that's not exactly a sure-thing. Don't let that stop you from trying it, though - when something can't be used at all, any idea is a good idea
bluesy_92 said:
Well, I've heard of people getting devices that are locked in read-only, basically making them unable to be flashed. The fact that nothing is working scares me that this may be the case, but at the same time, I never experienced it, so I definately can't be sure. Someone who has may be able to tell you if you're stuck. If it is read-only, your only hope is Dell by that point :-/
That's the first thing I think you should find out. Because if it is locked in read-only, your case is pretty much closed at that point (and not in a good way, unless Dell helps you.) If you find out it's not, then I would try to figure out why Honeystreak isn't flashing properly.
You can try update.pkg - everything is worth a shot, but unlike flashing Honeystreak, I think it won't repartition or anything (updating through a .pkg is the way manufacturers release updates - it was not designed to be harmful to the users data, afaik) so that's not exactly a sure-thing. Don't let that stop you from trying it, though - when something can't be used at all, any idea is a good idea
Click to expand...
Click to collapse
well, im not really trying to flash anything, i dont even care if its rooted or not, i just want it to be working basically. so my son can watch his elmo while i play my game or update my roms or watch my movies without him whining anything just to make it stock perfect again and this bypass to go through >__<"
What happened when you tried nvflash ?
Did it push all of the partitions properly ?
Are you sure you had it in apx mode ?
I just recovered mine from a honeystreak flash and nvflash rewrites all partitions. Then try to fastboot push the system / recovery images.. After that you should be able to use cwm via fastboot to write a new rom ( I went back to streakdroid 1.3 ).
Just put the image file into your fastboot directory and boot it from your computers hard drive ( fastboot boot cwm.img )
pyraxiate said:
What happened when you tried nvflash ?
Did it push all of the partitions properly ?
Are you sure you had it in apx mode ?
I just recovered mine from a honeystreak flash and nvflash rewrites all partitions. Then try to fastboot push the system / recovery images.. After that you should be able to use cwm via fastboot to write a new rom ( I went back to streakdroid 1.3 ).
Just put the image file into your fastboot directory and boot it from your computers hard drive ( fastboot boot cwm.img )
Click to expand...
Click to collapse
re read past posts?
pyraxiate said:
What happened when you tried nvflash ?
Did it push all of the partitions properly ?
Click to expand...
Click to collapse
this is what it looks like when i double click download.bat (http://forum.xda-developers.com/showpost.php?p=15109690&postcount=425) it gives me a FAILED!
pyraxiate said:
Are you sure you had it in apx mode ?
Click to expand...
Click to collapse
hold down Volume up + Volume down while plugging the USB cable in? Pretty sure i am because the first time i got prompted on my computer, i already downloaded the drivers, i just had to direct it to find the drivers, it said APX mode.
pyraxiate said:
I just recovered mine from a honeystreak flash and nvflash rewrites all partitions. Then try to fastboot push the system / recovery images.. After that you should be able to use cwm via fastboot to write a new rom ( I went back to streakdroid 1.3 ).
Click to expand...
Click to collapse
when you double click download.bat, after the img file 14 or 15 goes through, does your command screen suddenly disappear? whats your next step through that?
I flashed using these partition images ( Not the ones in the initial NVflash post) Maybe your image files were corrupted on download. Im glad someone uploaded them in 1 rar to ensure a clean set
Id start over from scratch by using this rar as your c:\Nvflash directory
http://www.multiupload.com/OM0VO9HBO9
See if those make a difference. After Nvflash completes the box will close, its normal. Use the pinhole to reset. From there I just used fastboot ( vol down and power ) to boot into cwm ( i can dropbox the image if you need it ). The command is : fastboot boot cwmimagename.img
from there you can format data/cache/system/dalvik/storage ( mine came back with an error not being able to format a few but try it anyway)
Mount SD card and copy something like the streakdroid zip to it. Using CWM's menus, install a zip from SDcard and choose it. It should run w/o error.
I had the Dell logo only stuck on boot after that , so I went into recovery and formatted user data only . From there it booted right up.
When you boot your streak, does it still boot into the original rom or does it just freeze on the Dell logo?
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
pyraxiate said:
I flashed using these partition images ( Not the ones in the initial NVflash post) Maybe your image files were corrupted on download. Im glad someone uploaded them in 1 rar to ensure a clean set
Id start over from scratch by using this rar as your c:\Nvflash directory
http://www.multiupload.com/OM0VO9HBO9
See if those make a difference. After Nvflash completes the box will close, its normal. Use the pinhole to reset. From there I just used fastboot ( vol down and power ) to boot into cwm ( i can dropbox the image if you need it ). The command is : fastboot boot cwmimagename.img
from there you can format data/cache/system/dalvik/storage ( mine came back with an error not being able to format a few but try it anyway)
Mount SD card and copy something like the streakdroid zip to it. Using CWM's menus, install a zip from SDcard and choose it. It should run w/o error.
I had the Dell logo only stuck on boot after that , so I went into recovery and formatted user data only . From there it booted right up.
Click to expand...
Click to collapse
sorry for the late reply, i just barely got home from work. i just bought myself a 2 gig micro sd card, and the adapter to stick the micro sd card in the bigger sd card. im going to try the update.pkg. unfortunate of me, i tried to do it right away but its low battery just my luck. charging the streak 7 right now.
pyraxiate said:
When you boot your streak, does it still boot into the original rom or does it just freeze on the Dell logo?
Click to expand...
Click to collapse
not even, it would boot original rom with the users data still enabled. (the reason i say this is because, the pattern lock is still there) even when i tried the nvflash, it would boot right up to the pattern lock and with the same background she always had.
idea
since i now have an sd card, im going to try the "Restore your DS7" but the only thing thats stopping me is that it requires CWR which i dont have. ill try to work around it since my DS7 is recognized by fastboot and ADB. Also wanted to add another misfortune of mine, she does have debug mode on but fastboot should work rather than ADB. wish me luck.
if anyone has any other suggestions or ideas, please budge in. i dont mind at all. thanks for the help all!
lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Click to expand...
Click to collapse
sorry lufc. thanks for moving. i apologize. just stressed out from real life events. arent we all ? aha. thanks and im sorry once again!
jayjaypops said:
since i now have an sd card, im going to try the "Restore your DS7"
Click to expand...
Click to collapse
failed, right when i typed adb devices, it shows my DS7 numbers, but when i type adb shell, i dont get ~# sign back. i get an error: Closed!
here i come nvflash. i shall try you again with the help of "pyraxiate" link he used to restore his DS7. wish me luck!
here i come nvflash. i shall try you again with the help of "pyraxiate" link he used to restore his DS7. wish me luck!
Click to expand...
Click to collapse
failed aswell, after double clicking restore.bat, i let it do its own thing, after it pushes p14.img file, it closes the command box right away, so i used an earring to turn off the device, unplugged from the usb, and yet, it still loads up pefectly with the same wallpaper and still the pattern lock... ughh, this is really frustrating!! ;'(
im trying one last step, before i call dell... (i dont even know if they'll replace this since im not the owner or the buyer of the product. unless they will? let me know)
my last step im taking is, im gonna use nvflash again, but this time im gonna use the WIFI DS7 partitions. hopefully it works. please almight lord! *sniff* begging. wish me luck. ill update
and as you already know what im going to say next, if anyone out there has any suggestions, ideas or plans. please help me out. might help others out in the community. thanks so much in advance

[Q] Troubles with Flash...

Hi all,
Well, I just got my Dell Streak 7 wifi this past Friday(9/2/11) By Sunday night I had rooted it to Dj Steve's HoneyStreak 3.2/RC 2.1. (HD7-RC2.1) Every thing is running great. Though the battery life stinks. Im now having troubles with Flash on the system. Ive updated flash to 10.3.186.6 in hopes that an update would fix it. But no go. Like if I go to live.twit.tv, it plays sound but no video.
Now I have downloaded another version called Streakdroid -HD 7 2.0 R2.(which is for wireless) Should I reroot it to the R2 since my Streak is wifi only. or is the RC 2.1 ok? & what can I do to fix Flash ?
Thanks for any help.
The newest build is r4. You can download it here:
http://tabletroms.com/forums/streak...m][r4]-honeystreak-hd7-2-0-release-3-2-a.html
Flash the r2 and then update to the r4. Hopefully the r4 build will sove your problem.
Thanks otnos. That worked.
But now When I connect my streak 7 to my pc.. I get MTP troubles & I cant find how to fix it & my pc shows Streak7 but wont install it & theres no drivers I can find for it...I dont get it.. didnt have these troubles when I was using Honeystreak RC2
Xpun3414 said:
Thanks otnos. That worked.
But now When I connect my streak 7 to my pc.. I get MTP troubles & I cant find how to fix it & my pc shows Streak7 but wont install it & theres no drivers I can find for it...I dont get it.. didnt have these troubles when I was using Honeystreak RC2
Click to expand...
Click to collapse
Read through this thread to find your answer about the usb issue.
http://forum.xda-developers.com/showthread.php?t=1216374
I remember it has something to do with this version of honeycomb does not support usb. Maybe someone who is familiar with this issue can comment.
otnos said:
Read through this thread to find your answer about the usb issue.
http://forum.xda-developers.com/showthread.php?t=1216374
I remember it has something to do with this version of honeycomb does not support usb. Maybe someone who is familiar with this issue can comment.
Click to expand...
Click to collapse
R4 on wifi here. Usb works fine via MTP with win 7 ( x32 and x64 ). If you are on xp I think you need mobile device center ( the new ms activesync ). Its a free download from Microsoft.
Ok I was reading through all the stuff & I tried the activesync.. & nothing Other wise.. this rom rocks Thing is.. I dont have an SD card reader on my Pc so i HAVE to connect my streak to my pc to get into the sdcard
Xpun3414 said:
Ok I was reading through all the stuff & I tried the activesync.. & nothing Other wise.. this rom rocks Thing is.. I dont have an SD card reader on my Pc so i HAVE to connect my streak to my pc to get into the sdcard
Click to expand...
Click to collapse
Try going into mmc and go to devices. Click on the yellow exclamation and update driver. Allow ms to search online for updates . You might need to uninstall old drivers first.
Here is information about mtp.
http://en.m.wikipedia.org/wiki/Media_Transfer_Protocol
Ok, First. Let me start by saying. Thank you for all your help guys. Its nice to be on an "active" forum & where others actually help each other.
Now.. Ive done all I can to get this working & nothing.. Ive installed all sorts of drivers.. upgraded to WMP 10 Used Windows update... & STILL the system just wont let me get into my Streak. As per the pic I posted.. Device Manager see the Streak7 & MTP Yet.. I cant install ANY drivers or update them... Oh,also, just to let you all know..Im on Win XP Home w/ SP2. Only thing left ,that I can see,is to go to SP3. Gonna try that & I'll let you all know how that step went.
Thanks again all,
Xpun3414
*Update* Updating to SP3 did not help,nor any other windows updates
Have you install Dell Sync? I think the driver is in the Dell Sync for windows program.
Xpun3414 said:
Ok, First. Let me start by saying. Thank you for all your help guys. Its nice to be on an "active" forum & where others actually help each other.
Now.. Ive done all I can to get this working & nothing.. Ive installed all sorts of drivers.. upgraded to WMP 10 Used Windows update... & STILL the system just wont let me get into my Streak. As per the pic I posted.. Device Manager see the Streak7 & MTP Yet.. I cant install ANY drivers or update them... Oh,also, just to let you all know..Im on Win XP Home w/ SP2. Only thing left ,that I can see,is to go to SP3. Gonna try that & I'll let you all know how that step went.
Thanks again all,
Xpun3414
*Update* Updating to SP3 did not help,nor any other windows updates
Click to expand...
Click to collapse
Ok I was having issues with both my computers not picking up the dell streak or not finding the correct drivers. It would actually charge it instead of recognize it as a usb device. Try this:
- Turn off your streak.
- Hold down the volume up and volume down buttons at the same time. While both are still held down plug the streak into a wall outlet or power strip. Let it sit for about 2 minutes.
- Unplug the streak and use the pin hole next to the sd card to power off.
- Plug the streak into the computer once it is powered on and see if anything changes.
- If it still has the yellow question mark next to it try and update the drivers again.
***Side note***My computers are running vista and win. 7 and I don't have an xp computer to try and replicate the issue on. I will work with you to try and get this working though. Let me know the results of this.
Well, I tried all of the posted things guys... sync sucks.. its not even a driver its just software. Last thing to do is to go from R2 to R4.. Though I had R4 in before & had the same troubles. Im at a loss... so,its either I go back to stock or go to Honeystreak RC2 & have no flash or stay with R2/R4 & have no way to connect to my pc.. What to do,what to do.And why the HECK dont Skype work on any of them, even when Skype says it supports the 7- Just a side note, & a rant.. no need to answer that one. GRRrrr
Xpun3414 said:
Well, I tried all of the posted things guys... sync sucks.. its not even a driver its just software. Last thing to do is to go from R2 to R4.. Though I had R4 in before & had the same troubles. Im at a loss... so,its either I go back to stock or go to Honeystreak RC2 & have no flash or stay with R2/R4 & have no way to connect to my pc.. What to do,what to do.And why the HECK dont Skype work on any of them, even when Skype says it supports the 7- Just a side note, & a rant.. no need to answer that one. GRRrrr
Click to expand...
Click to collapse
I will say that now that I am back to stock I am able to connect to both of my computers. So check out my thread here>> http://forum.xda-developers.com/showthread.php?t=1252840 and see if that resolves the issue for you.
Xpun3414 said:
Well, I tried all of the posted things guys... sync sucks.. its not even a driver its just software. Last thing to do is to go from R2 to R4.. Though I had R4 in before & had the same troubles. Im at a loss... so,its either I go back to stock or go to Honeystreak RC2 & have no flash or stay with R2/R4 & have no way to connect to my pc.. What to do,what to do.And why the HECK dont Skype work on any of them, even when Skype says it supports the 7- Just a side note, & a rant.. no need to answer that one. GRRrrr
Click to expand...
Click to collapse
One more thing when you complete this process if you have CWM recovery installed there is a process to get that removed. I would say attempt the first process first though. Let me know if it works. Again the link is here:
http://forum.xda-developers.com/showthread.php?t=1252840
Do you have many files to transfer? You can use other methods. I use File Expert, it can transfer file from your computer to the ds7 through wifi.
Hi again all. Well,I decided to do a wipe & go back to stock. I found the stock rom on the site & Im goin that way...after that,Im still gonna root it again In other words,Im gonna try & start over from scratch. Thanks otnos,never thought about the wifi thing. I'll give that a go. & Naaa, what ever files I want on the 7 are small & not many. So that should be fine. Also, again.. Thanks to all of you. You guys have been awesome in helping me through this as well as with quick responses XDA RULES !!! -Thanks to people like you-
X
Xpun3414 said:
Hi again all. Well,I decided to do a wipe & go back to stock. I found the stock rom on the site & Im goin that way...after that,Im still gonna root it again In other words,Im gonna try & start over from scratch. Thanks otnos,never thought about the wifi thing. I'll give that a go. & Naaa, what ever files I want on the 7 are small & not many. So that should be fine. Also, again.. Thanks to all of you. You guys have been awesome in helping me through this as well as with quick responses XDA RULES !!! -Thanks to people like you-
X
Click to expand...
Click to collapse
Let me know if there is anything else I can do to try and help. Best of luck.
Sent from my PC36100 using xda premium
Xpun3414 said:
Hi again all. Well,I decided to do a wipe & go back to stock. I found the stock rom on the site & Im goin that way...after that,Im still gonna root it again In other words,Im gonna try & start over from scratch. Thanks otnos,never thought about the wifi thing. I'll give that a go. & Naaa, what ever files I want on the 7 are small & not many. So that should be fine. Also, again.. Thanks to all of you. You guys have been awesome in helping me through this as well as with quick responses XDA RULES !!! -Thanks to people like you-
X
Click to expand...
Click to collapse
Best of luck to you, and welcome to the community.
Have to love how the xda community has a great willingness to help and the most active users I have ever seen. Glad I found xda and glad to be involved with it.
Sent from my PC36100 using xda premium
And the results are in...
..Success.
Ive followed AndroidOVERALL's directions & every thing went smoothly. Im now back @ the stock Dell Streak7 Wifi only rom. And all is well. I can connect to my pc again and see/transfer files to & from. Flash works with no problems. And its not like the last "stock" rom I tried. Which was called a wifi only S7 stock rom. It wasnt.. it was a T-Mobile stock rom. But this one I have now, is the real deal. I had just one little problem when I first rebooted the S7. it keep showing as the internal sdcard was not formatted & had nothing on it... I tried to mount it that didnt work... So I gave it a run for a few minutes & then rebooted. And all was well in Streak land. The system is running very smoothly. Though I do see how it is a bit, slow? laggy? compared to the StreakDroid R2/4 or HoneyStreak RC2.But still runs good. Now if I can figure out how DJ_Steve got a full blown web browser to work as a desktop browser on it Im set
Thanks again to you all for all the great help,tips & seeing me through this. Couldnt have done it with out you all. Thank You
So...Next step.. Reroot ! & see where it goes. Wish me luck
X

Dell Streak 7, now this is a brick!

I've bricked my dell streak 7 pretty good, here's what I did.
I purchased a T-mobile DS7 from ebay, it came rooted with a custom rom (3.1), I didn't like the rom and attempted to update to the latest official US 4G rom from the wiki. It didn't work and I got stick only able to get into fastboot and CWM. Now here is where I went really wrong, in a lapse of concentration while in fastboot I ran either: "fastboot erase boot" or "fastboot erase recovery" I can't remember which.
Now I can't seem to get into any mode! fastboot, recovery or ATX, is there any hope for saving this device? anything I can do? I'm pretty gutted..
Its charging but that's about all its doing!
ianmere said:
I've bricked my dell streak 7 pretty good, here's what I did.
I purchased a T-mobile DS7 from ebay, it came rooted with a custom rom (3.1), I didn't like the rom and attempted to update to the latest official US 4G rom from the wiki. It didn't work and I got stick only able to get into fastboot and CWM. Now here is where I went really wrong, in a lapse of concentration while in fastboot I ran either: "fastboot erase boot" or "fastboot erase recovery" I can't remember which.
Now I can't seem to get into any mode! fastboot, recovery or ATX, is there any hope for saving this device? anything I can do? I'm pretty gutted..
Its charging but that's about all its doing!
Click to expand...
Click to collapse
Nope I think you're pretty much screwed my friend
well poop... Soon going to be near the dell service centre in KL Malaysia, do you think they would be able to reload some sort of android software on the device?
Maybe try nvflash? For example ICS B4 or HoneyStreak. It's worth a shot...
Dell Streak only applicable in US & UK, I dont think they could support in Msia,
I suggesting charge devices for few hours, boot into nvflash mode, if nvxx drivers prompt means your device still there,
http://forum.xda-developers.com/wiki/Dell_Streak_7/Flashing_Guide
get the honestreak R7 HD2, thats the only files u needed,
flash it in nvflash mode
greetings from Kuala Lumpur btw
ianmere said:
well poop... Soon going to be near the dell service centre in KL Malaysia, do you think they would be able to reload some sort of android software on the device?
Click to expand...
Click to collapse
Use NVFlash for a HoneyStreak this will take care of all of it.
fastboot erase only bugs out on the S5 from what i've heard, I think i recall someone else mentioning that it worked on the S7.
Are you sure for a fact you cant get into APX mode? as that is pretty much impossible to break without physical damage as it's stored in actual ROM I assume (as in literal write-once only memory)
I can get into ATX mode!!!!!!!!!!!!!!!!!!!!!!!! woooharr Thats the best feeling ever after giving up all hope for this device. Nice, thanks everyone your all so kind!
hmm now what?... I'm going to do some research on how to flash a rom from atx mode.
ianmere said:
I can get into ATX mode!!!!!!!!!!!!!!!!!!!!!!!! woooharr Thats the best feeling ever after giving up all hope for this device. Nice, thanks everyone your all so kind!
hmm now what?... I'm going to do some research on how to flash a rom from atx mode.
Click to expand...
Click to collapse
Grab a rom that uses NVFlash, run the script it tells you to do while the device is in APX, done.
Try this I used it on my wifes t-mo streak lastnight to get back to stock
search XDA for this topic "Restore dell streak 7 (wifi only) using nvflash" second result in post # 51 there is a link that works nice for NVFlash
will it work on mine?
ssengine1885 said:
Try this I used it on my wifes t-mo streak lastnight to get back to stock
search XDA for this topic "Restore dell streak 7 (wifi only) using nvflash" second result in post # 51 there is a link that works nice for NVFlash
Click to expand...
Click to collapse
will this work on my tmobile streak 7??? i dont really care about 3g/4g i only use wifi on it
ted619 said:
will this work on my tmobile streak 7??? i dont really care about 3g/4g i only use wifi on it
Click to expand...
Click to collapse
http://d-h.st/iXc <- use that

stuck in cwm on my streak 7

Hello guys i have been browsing for about 2 days now trying to find a solution for my streak 7 that is stuck in cwm v3.0.2.0 i really dont wanna brick it so im being extra cautious so if some could please help me it would be greatly appreciated thank you
mikerouse1969 said:
Hello guys i have been browsing for about 2 days now trying to find a solution for my streak 7 that is stuck in cwm v3.0.2.0 i really dont wanna brick it so im being extra cautious so if some could please help me it would be greatly appreciated thank you
Click to expand...
Click to collapse
hard reset, boot into fastboot then install newer CWM
Thanks Nocturnal_50 about to try
cannot get it to fastboot i held down vol+ power the 3 buttons let up thats it tried several times i really need your help this is my first time flashing and adding a rom i have search this entire site almost concerning this issue but nothing pleasseeeee help
Power off. Then press and HOLD power and volume down
Sent from my Nexus 7 using Tapatalk 2
dose not work
It might be a soft brick if it can boot up. If a hard reset via adb dosnt work then it probably a brick.or If you could get into download mode (or fastboot as i still dont get it after a year or 2) and flash stock firmware then it should work. If not then nothing will work as far as im concerned.
Sent from the phone of Gamers
mikerouse1969 said:
dose not work
Click to expand...
Click to collapse
Then you are SOL or suffering from ID10T error.
giveen said:
Then you are SOL or suffering from ID10T error.
Click to expand...
Click to collapse
I believe the end user might be suffering from farkingdarmsheetitis
Do you feel better now **** head
Nocturnal_50 sorry to bother you brother but i just wanted to say that i am able to hook my streak 7 up to usb and my pc picked it up i was able to add and remove files from my s7 through usb mass storage is there anyway i can bring my device back to live using this process or do i have use fastboot
mikerouse1969 said:
Do you feel better now **** head
Click to expand...
Click to collapse
Much better, there is only so much hand holding I can do. I tried to guide you what thousands of others have no problem doing.
mikerouse1969 said:
Nocturnal_50 sorry to bother you brother but i just wanted to say that i am able to hook my streak 7 up to usb and my pc picked it up i was able to add and remove files from my s7 through usb mass storage is there anyway i can bring my device back to live using this process or do i have use fastboot
Click to expand...
Click to collapse
its all done through fastboot

[Q] Dell streak 7 frozen on dell logo (no rainbow)

PLEASE HELP ....!
i just bought dell streak 7 and after i downloaded the honycomp and press to update . it asked me that it might require to restart and take like 10 min..
but after restartin its frozen on dell logo .. i have searched alot and did pressed the button beside the sd card and did the V+ with power and nuthing happens so please help >>> if it require to be fully charge to restore in recovery mood and please note its still the defult dell logo not with rainbow or anything as i did read in many fourms .. Please help i bought it for my dad's birthday and aint know what to do ... Please ASAP .. thanks
First, open the side port, and use a paper clip and punch that little hole, it will do a hard reset.
You need at least a 60% charge for recovery mode, and always do updates while connected to the external power cable.
Do a reflash of the upgrade, and do a factory reset and let us know how it went.
giveen said:
First, open the side port, and use a paper clip and punch that little hole, it will do a hard reset.
You need at least a 60% charge for recovery mode, and always do updates while connected to the external power cable.
Do a reflash of the upgrade, and do a factory reset and let us know how it went.
Click to expand...
Click to collapse
i hard reset it by the paper clip and plug it to the charger so.. how long it take to be in fully charge??!!\Thanks
3-5 hours.
giveen said:
3-5 hours.
Click to expand...
Click to collapse
i did fully charge it ... pressed the v+ and power and just startin up with dell logo and no menu ... what to do please Help!!!:crying:
There really isn't a need to PM and post here, pick one
Like I said in the PM, Press and HOLD volume+ and power.
giveen said:
There really isn't a need to PM and post here, pick one
Like I said in the PM, Press and HOLD volume+ and power.
Click to expand...
Click to collapse
Really sorry but u know its hard to have such an issue i have to give it to my dad tomorrow.
I pressed and hold for like more than 1 min in v+ and power and nuthing comin up just the dell logo and nuthing more >> what to do ?
a friend told me its might caused because i installed the wrong software edition like not for this model >> so what to do?
Use the nvflash pack back to stock Android 2.2
giveen said:
Use the nvflash pack back to stock Android 2.2
Click to expand...
Click to collapse
Thank you ...... but how please tell me how cause am zero head in andriod.....
please send me how ? thank you in advance.:angel:
Search.
I apologize but I am tired of writing how.
Spiedy said:
Thank you ...... but how please tell me how cause am zero head in andriod.....
please send me how ? thank you in advance.:angel:
Click to expand...
Click to collapse
Watch giveen's videos here: http://www.youtube.com/watch?v=ydM7qkoCs00&list=PLB99FAE280F618B12&index=1&feature=plpp_video to learn how to NVflash, download this file http://d-h.st/iXc, unrar and run the restore.bat file.
The link you provided to the "restore to 2.2.rar"....are these files for the WiFi US model or the T-Mob version ?
wptski said:
Watch giveen's videos here: http://www.youtube.com/watch?v=ydM7qkoCs00&list=PLB99FAE280F618B12&index=1&feature=plpp_video to learn how to NVflash, download this file http://d-h.st/iXc, unrar and run the restore.bat file.
Click to expand...
Click to collapse
Hi thanks for the guide n Links, i have a Dell streak 7 4g T mobile USA n its stuck on T Mobile Boot loop, i have tried master resetting it a few time, hoping it might work but no success, i have searched google n also Xda alot but all links available r of Streakdroid.com which dont work at all, Now u hav provided this "restore to 2.2.rar" are these files for Dell streak 7 4g T mobile Locked version, if not plz help me finding files for this T mobile 4G US version cos it been a week im trying to find these files...
jseivers said:
The link you provided to the "restore to 2.2.rar"....are these files for the WiFi US model or the T-Mob version ?
Click to expand...
Click to collapse
Yes, the base version for all.
---------- Post added at 09:26 AM ---------- Previous post was at 09:22 AM ----------
princepavs said:
Hi thanks for the guide n Links, i have a Dell streak 7 4g T mobile USA n its stuck on T Mobile Boot loop, i have tried master resetting it a few time, hoping it might work but no success, i have searched google n also Xda alot but all links available r of Streakdroid.com which dont work at all, Now u hav provided this "restore to 2.2.rar" are these files for Dell streak 7 4g T mobile Locked version, if not plz help me finding files for this T mobile 4G US version cos it been a week im trying to find these files...
Click to expand...
Click to collapse
As far as I know, it's the only restore file around. Can't comment if/what you'll lose.
Pretty sure this is US wifi only and it wipes everything.
wptski said:
Yes, the base version for all.
---------- Post added at 09:26 AM ---------- Previous post was at 09:22 AM ----------
As far as I know, it's the only restore file around. Can't comment if/what you'll lose.
Click to expand...
Click to collapse
well i have tried Nv Flashing it with this restore to 2.2 file, also added a 22.img to it n flash it n few subtractions of .img files too, wot ever i could find here on xda so far but my Dell streak7 4G Tmobile USA Locked version on froyo 2.2 is stuck on tmobile boot loop & i also tried flashing via SD card by update.pkg files frm XDA & this file it loads 90% & give a Modem Error.. check image below..
i need ur help... dnt know wot to do next.. plz guide me wot to do next to bring it back to life thanks in advance
If the 2.2 file don't work, nothing will! You might be stuck in the "read only" mode. Some have returned their S7 to Dell for repair but at least one person has gotten out of that mode. Not sure if there is a thread on that subject or one got OT. Do a search on "read only".
I've been doing some research into the read only mode. Want try something but need one that is having the problem
Sent from my Nexus 7 using Tapatalk 2

Categories

Resources