Please help. I downloaded DSP Manager on my Captivate, and now the phone is stuck toggling between the Galaxy S screen and AT&T screen. I'm currently running stock Froyo and Speedmod kernel. I can get into Recovery mode and Clockwork, but "wipe data/factory reset" did not fix the problem.
I've searched this forum for my particular problem, but couldn't find any answers. Please help.
Probably need to reflash the stock ROM. That would be my best suggestion. It sounds like DSP either damaged a file or replaced it with something that doesn't work.
Here's the best set of directions to flash stock with odin.
Clear dalvik cashe might help. Or just re-flash what ever rom you use from recovery. Shouldn't need to go back to stock.
whiteguypl said:
Clear dalvik cashe might help. Or just re-flash what ever rom you use from recovery. Shouldn't need to go back to stock.
Click to expand...
Click to collapse
Tried clearing Dalvik Cache, didn't work. Jay1390, is there any other possible solution rather than completely wiping my phone? I mean, I'll do it, I'd rather have a phone that works rather than a $200 paperweight. But, couldn't I somehow "uninstall" DSP Manager?
You have already wiped data/factory reset, so the data you are trying to not lose has already been deleted, at this point flashing to stock will only fix your boot loop problem, did you happen to make a backup either nandroid or tibu?
Edit: oh, if you are talking about the stuff on the sd card flashing to stock doesn't wipe that, but if you want to be safe go into recovery and mount it to your computer and copy everything to it before you flash stock.
Related
I am going to be selling my Hero to someone who would like it rooted (as it is now).
His plan is to use it in WiFi mode only and won't be activating it with Sprint.
Is there a way to clear all my private data (logins, bookmarks, contacts, calendars, etc.) without unrooting?
Will he then be able to enter his google account info and gain access to the Market though WiFi?
Thanks!
Eph
The "Factory Reset" feature does the trick. But if you are really paranoid, you could wipe data, cache, dalvik and resintall the ROM from recovery.
Won't factory reset unroot me?
Will he still be able to access the net and the market via WiFi?
What ROM are you running?
andythegreenguy said:
What ROM are you running?
Click to expand...
Click to collapse
Nfinite's Stock.
cephraim said:
Nfinite's Stock.
Click to expand...
Click to collapse
Factory reset should bring the phone back to the state it was in when you first installed the rom. If you really want to be safe, boot into recovery, wipe everything and reflash the rom. You will still be rooted. Remember to either remove and keep your sd card or to format it to erase the data on it, THEN create a nandroid for whoever is buying the phone. Yes, they will be able to run the google setup via wifi if they choose to do so.
Weird.
After I do a factory reset (either from settings or from recovery), it stays in a boot loop. I have to pull the battery and restore the Nand.
What am I doing wrong?
Thanks,
Eph
Tried many different factory resets last night.
Tried from recovery mode and from settings>privacy.
In each case, I got stuck in boot loops.
Also tried to wipe data, cache, dalvik and resintall the ROM from recovery. Same thing - boot loop.
All I could do was pull the battery and do a nand restore.
Any ideas?
go here and download the ruu. http://forum.xda-developers.com/showthread.php?t=800586 . follow the instructions. this WILL take away root and will flash you black to stock. then, go here:http://forum.xda-developers.com/archive/index.php/t-743289.html and follow those instructions to re-root your phone. it is very easy. then flash your rom of choice again. that will erase your data AND get rid of your bootloop. idk why the othere way isnt working for u though
OR, you should try to take out your sdcard or format it before you reflash the nfinite's stock. i had this problem once because some of my data was on the card and so when it tried to boot it got stuck.
Thanks guys. I tried the factory reset a couple more times, and for some reason it booted.
Thanks again!
Simple question. If answered in another thread, please give me a pointer. I searched, but couldnt find an answer. Here is the question.
Why do we have to revert to Stock 2.1 before flashing a custom ROM? Why can't we flash a 2.2 custom ROM over another 2.2 Custom ROM? And finally, is there a CWM flashable version of stock 2.1 with root and cwm pre-installed?
Thanks.
before a lagfix was adopted as "standard" by the dev community this was necessary to reset the phone file system to n unmodified state. Now that all the devs are using the same type of awesome lagfix, reflashing to stock isn't really necessary anymore, IMHO. I never do it anymore. I just do a wipe user data from my recovery menu and everything seems to work fine.
The answer is not simple.
You do not have to flash stock. It used to be more needed. Devs still say so, but I believe that is largely to problem shoot issues from the get go. Threads are cluttered with comments like omg my phone is possessed. Well what were you running prior, and what was your setup? If stock well we know what was what. If ulk kernel with ext 2 loop, then yes there could be issues
Flashing stock at this point is just as risky, if not more risky then flashing directly over. If something feels wrong and you can't fix it, flash stock\master clear start over
So in essence, we can flash fine over an existing ROM and if there are issues, better go to stock and flash from there. Am I right? Can you list the steps you take to flash a new ROM without going to stock? Will there be issues if lets say I flash a 2.2 ROM over a 2.2.1 ROM?
I.do this but it may be redundant
Backup apps
Dl rom
Boot recovery
delete cache
delete davlik cache
Flash rom
delete davlik cache
Boot
I never did flash back to stock. I failed. Odin would not connect.
But for you guys out there - there is a way to bring recovery menu, that's what saved me.
Remove SIM and SD card.
Power+VolumeUp = reboot from any locked state
Power+VolumeDown=reboot into recovery
Power+both Volumes=download mode, never worked for connecting Odin, I could go there from Recovery
So my sequence:
remove old backups
create new backups
download ROM
boot into recovery
flash rom
clear cache partition and dalvik cache (probably the same)
run fix permissions
reboot
I think for most new ROMs that take advantage of the updated 2.2.1 filesystems you don't need voodoo or any lagfix. Can't even remember the last time I used ext4 when using speedmod kernel and JS3/JS5 Rom. Makes it easier to flash new roms when you don't have to worry about corruption.
But flash back to stock clears out any unnecessary gunk that could cause 90% of Force Closes and random vibrates on boot
I always thought of it as installing a new operating system or a different version of. It. Cming from the same roots of the ROM or OS, you can just install a different, major update over it (Different ROM) and be on your way.
However if sonething is built differently from the start (Windows and OSX), you cant just install right over the other because there are problems.
I always start back at the beginning because it onky takes a few minutes extra and it makes the phone a whole lot faster; you clean out alk the gunk and unused folders and whatnot.
you definitely want to do a master clear if you do not start from stock, since there are some caches on your sdcard may ruin your new system.
mengbo said:
you definitely want to do a master clear if you do not start from stock, since there are some caches on your sdcard may ruin your new system.
Click to expand...
Click to collapse
Does anyone know how to do a Master Clear with Odin3? Or is there some other way we can do it without Odin3?
Thanks.
Enhanced said:
Does anyone know how to do a Master Clear with Odin3? Or is there some other way we can do it without Odin3?
Thanks.
Click to expand...
Click to collapse
I use the oneclick odin to do master clear. The master clear works on i896 too.
Guys I for a sec thought my phone was haunted!!
Steps I followed-
Was on Simplicity(tried from SURFACE too) Rom, did not wipe anything.. just went to download mode from Power menu Options.
Download JVZ base from SamMobile.
Flash via Odin.(YES, repartition was ticked)
Wait for it to reboot.
Then I see 4-5 things giving force close, and the worst part was that all the previous apps including Superuser were still there all forceclosing.. !!!
The same happened all times (4)...
Did anybody face the same problem? Is there a solution or something?
After flashing a new ROM (no matter what ROM) you have to do a Factory Reset and install your Apps from scrach. This is the best solution.
But you try first with few hope to delete Cache and Davlik from CWM Recovery Menu. If it wont work, try factory reset. Back-up your files becouse it will delete them all.
ZiDanRO said:
After flashing a new ROM (no matter what ROM) you have to do a Factory Reset and install your Apps from scrach. This is the best solution.
But you try first with few hope to delete Cache and Davlik from CWM Recovery Menu. If it wont work, try factory reset. Back-up your files becouse it will delete them all.
Click to expand...
Click to collapse
Agree with this, if not you might find alot of your apps will keep force closing
Guys did u understand the situation first of all? What are u telling?
I am telling here that Odin wipes every partition and all apps are removed if u flash a ROM through ODIN but when I flashed JVZ through Odin, it actually didn't wipe anything surprisingly!!
Apps were still there and fc-ing..
billjobs said:
Guys did u understand the situation first of all? What are u telling?
I am telling here that Odin wipes every partition and all apps are removed if u flash a ROM through ODIN but when I flashed JVZ through Odin, it actually didn't wipe anything surprisingly!!
Apps were still there and fc-ing..
Click to expand...
Click to collapse
Man, calm down a bit, will you?
I've flashed Odin ROMs many times, and I can tell you that not every time you flash (even with repartition enabled) your phone will be completely wiped.
But then, as stated before, you should do a factory reset. Is it so difficult to go to settings>backup and restore>reset factory data? I don't think so.
Bye!
This concerns my galaxy note n7000. I had a rooted checkrom v4 working on my note. I tried to install criskelorom v2 and got bootloops. I then tried to go back to stock via odin and flashed stock N7000 KL3 ROM which i had earlier used, I had to go to stock because after bootloop even recovery was not working. now after flashing stock i am getting a strange problem of the phone getting stuck at the welcome to gt-n7000 screen . "touch the android to begin" . nothing is happening after touching the android on the screen although i can change the language etc and even the pull down notification is also working but the phone is stuck at the initial stage. I have a nandroid backup of my initial checkrom in my internal sd card but cannot restore it before installing a rom with root and cwm. Kindly help . Thanks.
I'm having the exact problem. I'm hoping we can create a soft brick sticky thread. I walked away from my phone last night because I was getting frustrated.
My attempts to flash stock ROM via Odin resulted in the "not responding" message in windows. I can get to both CWM and download mode, however any ROM flashed via CWM results in the behavior described by the OP. fortunately I have access to another Samsung phone, so I can double check driver installation (although it worked for flashing previously).
I'm continuing a search through the forums to find some alternate methods for unbricking. Hope someone has an idea.
Thanks!
It seems that the stock roms i was trying to flash were nonwipe ones so i flashed xxla3 which is a wipe rom and was able to boot . I then flashed the earlier kl3 rom over this rom because kl3 is rootable. I then rooted and installed cwm booted into recovery and restored my earlier nandroid backup. I think the situation arises because the nonwipe rom was unable to clear the cache , user data etc
Thank you for the information. I had exactly the same problem. What did you use to root KL3 ?
Just wipe both cash and user data, and reboot.
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
and do a factory reset and wipe cache.
problem should be solved cause that's what i did
Flo1389 said:
Just wipe both cash and user data, and reboot.
Click to expand...
Click to collapse
Thanks
liewkingyan said:
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
And do a factory reset and wipe cache.
Problem should be solved cause that's what i did
Click to expand...
Click to collapse
daaamnnn!!! I'm scared to dead because of this!! Thanks dude!!!, no more **** ass ics
I had an issue like this once or twice.
http://www.youtube.com/watch?v=L5XjF6sPef4
This skips the that screen. then I cleared some things like google framework and it all was peachy
But its not wroking for me
I downloaded ROM Toolbox Pro, and installed a boot animation. Upon restarting, I became stuck in a boot loop that toggled back and forth between Corn Kernel's screen and the AT&T logo screen. I CAN get into CWM, however I cannot wipe all data. Of course I tried "install update.zip", reformatting, wipe dalvik cache, etc. I then installed Legend's KK4 Rom onto my SD Card and tried to flash that, but it won't install, keeps saying "Installation Aborted". I ALSO can connect my phone to my laptop with no issues, but I'm not sure what to do from there.
I am perfectly willing to flash back to stock, but I cannot wipe all data. Is Odin Master Clear my only hope? Any suggestions would be greatly appreciated at this point, as I have tried everything in the CWM menu and do not know what else to do.
Does anyone have any suggestions? I have searched this forum thoroughly, as well as Google. Just need a little guidance. Please, any help would be GREATLY appreciated.
You should be able to grab a stock ROM and flash it. No need for Master clear, the flashing of the stock ROM should take care of it.
Thank you, I'll try that now.