Database Develop

HELP!

Hey guys I'm not sure if this is the right place to post this but I just really need some help...
I just recently flashed my galaxy to JP6 and installed voodoo and everything was running fine. I then wanted to root my phone and tried Chainfires solution from here on this forum. It bricked my phone and I had to flash back to JM8.
I am now running JM8 but when I go to flash JP6 it says fail and wont let me?
I also tried flashing JMP and my phone screen went green halfway through and stopped flashing.
Any ideas why I cant flash to froyo anymore?
Is it because I still have voodoo installed?
If so how do I delete it? I've tried following th instructions from curios google page but I couldn't figure it out.
Any info on this would be greately appreiciated!
Thanks

Why post here?
Don't like Q&A subforum?
No, its not related to voodoo.
I think you need to reflash JM8 again with 513 pit and repart enabled. After that flash JPM. (I believe no-repartition, 513pit loaded, but not entirely sure)

I'm sorry, I'm only new here.
I've tried re flashing to JM8 and then trying to go to both JP6 and JM8 but both say fail at odin.
The error reads: "Can't open the serial (COM) port"
Does anyone know what that means?

Well if you EXACTLY follow the steps:
Leave USB disconnected, phone off.
Open odin, select options/files;
Start SGS in download mode;
Connect cable NOW.
Start flashing..
.. and still got this error... No, u just shouldnt get one. It might be ur pc configuration, but cant really tell now.

GalaxyDroid88 said:
I'm sorry, I'm only new here.
I've tried re flashing to JM8 and then trying to go to both JP6 and JM8 but both say fail at odin.
The error reads: "Can't open the serial (COM) port"
Does anyone know what that means?
Click to expand...
Click to collapse
In download mode there's a "Samsung Android USB modem" driver that should be active. This is the COM port that Odin uses to talk to the phone. Look in the Device Manager and see if it's there. If it's not there, unplug the phone from USB, reboot your PC, then plug the phone in download mode into a different USB socket.
If the driver is there then some other software on the PC may be grabbing its COM port, especially software for other mobile phones like Motorola or Sony-Ericsson. Make sure anything like that is uninstalled.

TheBeano said:
In download mode there's a "Samsung Android USB modem" driver that should be active. This is the COM port that Odin uses to talk to the phone. Look in the Device Manager and see if it's there. If it's not there, unplug the phone from USB, reboot your PC, then plug the phone in download mode into a different USB socket.
If the driver is there then some other software on the PC may be grabbing its COM port, especially software for other mobile phones like Motorola or Sony-Ericsson. Make sure anything like that is uninstalled.
Click to expand...
Click to collapse
Thanks heaps, I'm pretty sure it may be voodoo that is causing my problems when flashing firmwares.
Is there anyway that I can disable/ un-install vodoo from download mode?

[Q] Unknown device - Samsung Galaxy S

Hello,
My Samsung Galaxy S is listed as Unknown Device.
It started after an update to 2.2 via Kies and i did that with the regedit exploration. That was the 2.2 beta and then i updated it again with the official release this time also with the regedit exploit. I have formated the internal SD (i cant dismount it cause im on froyo i guess? atleast there is no option about it). Factory reset and so on.
Reinstalled kies 5 times, installed USB drivers again and again. I have tried it on different platforms with both XP (32-bit), Vista (32-bit) and Slackware Linux (32-bit). The computors just cant find drivers for the device.
I have tried all the different usb options in the phone settings nothing happends. I think i have tried everything that can be found here and on google...
The phone is Rooted and im now on PDA: I9000XWJP6, PHONE: I9000XXJPM, CSC: I9000XEEJP4.
Build Info: 2010. 10.
I believe the main thing here is that i dont even get the MTP application in the phone to recognize that a USB connection have been initialized. Nothing happend in the phone when i connect the USB no MTP screen or anything, just chargeing. I have tried 2 diffrent usb cords both that worked before so its not that.. The computor just says unknown device and Kies dont notice anything at all.
I have tried installing another firmware with Odin in Download mode and stil unknown device.
So i believe the phone have, in some way lost its internal usb drivers? I have also noticed that the battery "100% charged" icon does not disapear after i disconnect the usb or the charger. Also sometimes the icon continues to charge after i disconnect. Sometimes when i turn the phone of it starts by itself after like 2 min.
Anyways! What i was wondering is if there is a way to install an official firmware via update.zip volume-up+home+power?
When i try to install a customized rom with update.zip it says:
E:signature verification failed Installation aborted.
Cause of 3e bootloader? But i think its best to maby have a good stable firmware before i go customized?
So any help would be appreciated!!! heeeeeeeelp.....

Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes

Serikiito said:
Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes
Click to expand...
Click to collapse
Hi m8!
Thx for the reply!
I have allready tried installing those drivers doesnt work for me.
I have tried Download mode with Odin to, it still says Unknown Device in Windows (i have Vista 32-bits, but tried it on XP and Linux to).
So anything that has to do with a USB-connection seems impossible at the moment...
The phone dont start the MTP application at all and windows dont install the drivers, it just says unknown device when trying to install.
I just unistalled Kies and removed everything from regedit with "kies" in it and then rebooted and downloaded a new fresh Kies file. Installed it and rebooted again while i wiped the phone, formated the SD and did a factory reset.. still "Unknown Device" :[
The problem seems to be the software in the phone.. so my question is: Is there is anyway to update or flash the firmware in the phone without any USB connection?

Is there maby any way to get 2e recovery mode without usb connection?

Endombed said:
Is there maby any way to get 2e recovery mode without usb connection?
Click to expand...
Click to collapse
There is an app in the Android Development section here that allows you to flash a kernel within Android. Never tried it myself but I believe it is now stable and you could use it to flash CF-Root internally
EDIT: Here you go...
http://forum.xda-developers.com/showthread.php?t=877444

Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.

Thx man!
But it seems that i dont have root access anymore, so cant use that app either :/ i think im a hopeless case.. :[

Tehpriest said:
Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.
Click to expand...
Click to collapse
Yes man.. i get the same thing with the Yellow friend that says "Do not turn of target!!!"..
"One of the USB devices attached to this computor has malfunctioned. And Windows does not recognize it."
and also
"Unknown Device Installed
The software for this device has been successfully installed.
Unknown device - - Ready to use"

Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.

Tehpriest said:
Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.
Click to expand...
Click to collapse
Yep tried that to.. i have even tried it on 3 diffrent computers 2 of them in all usb ports.. and everything els works that was connected in those ports.
I dont think its the software in the computer that is the problem.. :/
I believe there is some internal (in the phone) usb firmware problem, if thats possible?

i have exactly the same problem my usb by giving uknown device (i used it at 3 computer with kies software) it seems usb not working anywhere.
I believe our only solution is to find a way to install e2 recovery via the phone.

I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?

I turned the phone in to my provider. this message is what i got from the repairservice.
Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
WTF?!! i have been really careful with the phone. The only thing i can think of is that it has been really cold where i live (Sweden) and i had it in my pocket.. but i mean cmon! it goto withstand that!
I guess i have to wait for samsung to make it possible to update firmware via Wifi.

Neon2 said:
I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?
Click to expand...
Click to collapse
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.

Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
All makes of Smartphone seem to suffer from, condensation problem .
Or at least thats what the service centres
jje

Endombed said:
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.
Click to expand...
Click to collapse
I think so. I have my phone rooted and also ROM Flash Manager installed. The issue now is to find an european stock image to flash compatible with ROM Flash Manager
I looked for the stock firmware image (my phone has JF3) but can't find where.
Anyone?
I don't want to flash a cooked image just in case I have to ship the phone to the repair service.

Hello, I have exactly the same problem.
My SGS is unrooted, due to warranty, and alway keep it with maximum care (it is not a free phone...).
Symptoms are the same:
-It started after an update to 2.2 via Kies
-Absolutely unrecognized by windows (xp32 and win764) anymore
-battery "100% charged" icon does not disappear after i disconnect the usb or the charger
-turning the phone off it starts by itself after like 2 min.
More: incredible but sometimes when connected to car charger, I have the message "usb connected".
Already tried all possible (unrooted) tricks.
I believe usb internal drivers (if any) are corrupted (maybe by moisture?), how to reinstall them?
Maybe usb connector damaged; I have moved a little bit with a scrwdrvr the usb connector plate and clean with air and a thin blade but no result.
I will bring to service, as warranty is still valid, but surely they will discard me (I am optimist)
If there is any solution, please post it.

Hello,
Same here, can't connect phone to pc, mtp dont start on phone after connect it on pc !
Anyone know how flashback stock rom if its possible ?

Hi someone have a stock firmware for flash it in to recovery ?
I think i will try send the phone to samsung after reflashing for see what the guys from samsupport says about this !

Yes, if a part of firmware has been corrupted (with usb info for pc recognition) maybe the solution is to reinstall entire rom.
How to find a stock rom?
How to reinstall rom from SD card in a non rooted phone with no usb connection?

[HELP] PC doesn't recognize phone after update

Hello everyone,
Alright, I've just updated my phone to the latest version Androind 2.2.1 JPY.
I was following the guide for installing Darky's ROM, but my pc doesn't show anything when I connect my phone.
I have up-to-date drivers.
When my phone was on 2.1 JM2 it was working.
I have no idea what the problem is.
I really appreciate the help and thanks in advance.
-Mick

Hi i have a similar problem, i have to connect it about 3 times for it to recognise, i am on darkys rom. anyway try this:
go into settings - wireless + networks - USB settings and select ask on connection. then try it again.

I'm not on Darky's rom yet since I can't connect to my PC.
I've just tried that a couple of times but didn't work.

does the phone connect when in download mode ? try a re flash if it does...

It does not, it also doesn't show up in Odin.

does the pc make any sounds when usb is connected ?? are you sure its not the usb cable thats at fault here ??

No sound at all. But like I said, it worked when I was on 2.1. So it's not the USB cable.

Uninstall Kies .
Reboot and reinstall Kies to give you USB drivers .
If your phone works and is set to USB mode Mass Storage connect cab;e and windows will pick up phone .
jje

Just tried it, but it didn't work.

try a stock rom

I am on a stock rom. A fresh JPY 2.2.1.

Still stuck with this problem.

have you tried a different port on the PC ? if that doesnt work u will have to try another cable to find out if its the phone or not... have u done factory reset in recovery

Yes, I've tried all the ports on my PC.
The cable is fine, because it worked just before I updated.
I'm going to try a factory reset right now.
EDIT:
Factory reset didn't work. Should I try a re-flash?
EDIT2:
Just remembered I can't do a re-flash since I can't connect to my PC whatsoever.
Did I brick my phone?

I have the same issues but I have flashed several roms none the less. I gave up on the PC after serveral PC's and several days. I think it may be a usb hardware issue as I did connect to Kies once and the PC once but then I tried the next day and I've never gotten it back on despite countless driver reinstalls, android SDK adb attempts, odin, heimdall etc...
So to flash I first installed clockwork mod as an update.zip (put it in the root folder, then boot up in recovery - you'll need 3 button mode working I think). This was in the instructions for the first VoodooDoctor rom I flashed.
I also highly recomend also getting steam recovery (mine was part of a rom so I don't know the XDA link) as it allows flashing roms that are stored on the SD card. which is handy for me as that is the only way to get something on the phone if the flash goes sideways and I didn't already have it in the root folder. It is accessible now as the update.zip in my root folder and so I can run it from clockwork.
Clockwork allows you to flash from the phone - no odin needed. Steam does the same but steam is newer so I've mainly stuck with CWM except when I had to figure out a way to fix a bad flash....
I made this post about my near death (of my sgs)
http://forum.xda-developers.com/showthread.php?t=929020
I'd still stick with the tried and true as its a little nerve racking to flash knowing that you need some function on the phone to recover but if you are dying to try a good tested custom rom I'd encourage you do so.
G

[SOLVED] Kies can not update 2.2.1

THIS PROBLEM IS SOLVED!
Hi, I am using JPO version of Germany (DBT) for I9000 international. When I connect device to computer, update notification appears for 2.2.1. However, when I click on update after skipping or non-skipping backup, device disconnects and notification appears that device not connected. Then, clicking on OK update process ends but my galaxy s is connected to KIES. I tried numerous times and I am waiting for someone who overcame this problem.
full error message: Firmware update stopped because GT-I9000 has been disconnected. Please check the connection and try again.
I tried those:
Updating KIES
Hard reset device
Uninstall & reinstall KIES
Open KIES as admin
Open KIES in compatibility mode
Restart phone
I also tried Win7 32 bit,XP and XP virtual PC
Solution is in http://forum.xda-developers.com/showthread.php?t=997974

have you tried it on another computer?
If that does not work you can always download the version you need and flash it yourself through odin. As long as it's a stock rom it shouldn't even compromise your warranty
EDIT:
But first try the other computer, if it does not work on any other machine you can also suspect faulty hardware and just send it to samsung / bring it to your carrier. I think they will investigate and update it for you.

theduckking said:
have you tried it on another computer?
If that does not work you can always download the version you need and flash it yourself through odin. As long as it's a stock rom it shouldn't even compromise your warranty
EDIT:
But first try the other computer, if it does not work on any other machine you can also suspect faulty hardware and just send it to samsung / bring it to your carrier. I think they will investigate and update it for you.
Click to expand...
Click to collapse
I managed to understand problem thanks to you but I can not figure out a solution. You are correct that my phone connects and synchronizes great normally but it does not connect to KIES in download mode.

maybe kies does not recognize in download mode...so u can choose alternative of flashin with odin..its easy and fast =)

Lavius said:
maybe kies does not recognize in download mode...so u can choose alternative of flashin with odin..its easy and fast =)
Click to expand...
Click to collapse
I am afraid that I had a bad experince with Odin. My phone connected to Odin. When I clicked start, nothing happened. After half and hour I unplugged, I saw a phone, a cable and a computer on screen. After that, I updated to Froyo using KIES, that is why I am not a fan of ODIN

Solution is there:
http://forum.xda-developers.com/showthread.php?t=997974

[Q] Semi-bricked, USB not recognized, doesn't even charge

Hi!
After searching the forums for a while I did not find a thread exactly matching my problem, so if I've overseen it, please just point me there.
To my problem:
I did a very stupid mistake, flashing a new custom ROM with a different kernel (as usual, cooked in Docs Kitchen) without converting back the lagfix. So I ended up with a non-booting phone - so far, so bad. Note to myself: Never flash a phone during the carnival weekend again.
So I booted into download mode and tried to recover it via Odin, but here I got my really bad surprise: USB device is not recognized, thus I Odin does not see the phone.
I tried 4 different PCs with Win7 or XP, a Linux desktop and a Macbook. I also tried 5 different USB cables (they all work with other smartphones like the Desire and the HD2). Wherever I stick the phone in, it is not recognized (code 10/code 43 in Win7). I used the stand-alone-drivers from the sticky forum thread here, and also most recent Kies versions, always the same: USB device not recognized.
Does anybody have an idea how to revive the USB connectivity? I'm almost at the point to send it in for repairs...
Or can someone elaborate how I could have killed USB with corrupting the ROM? I've to admit I do not really understand how these two are connected.
--Jens

Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.

formatted to ext4 without any backup
I did a very stupid mistake too. Got darky's rom 9.3., installed i, everything worked great(really awesome thing), then i wnt to recovry mode and entered tthe speedmod and it showed mr that my phone has rtf files system not EXT4 as it should be, thou i installed the speed mode. then i chose to repartition it to ext4 but i didn't choose the backup. Just clicked to format the sd. It did formatted to EXT4, rebooted, i saw the darky's rom logo and the the phone vibrated and the logog of the droid just flashed. I tried to enter recovery mode-didn't load. Started the download mode connexted to pc used ODIN 1.7 with PDA I9000XXJPY.tar, MODEM I9000XXJPY.tar, GT-I9000-CSC-MULTI-OXAJPY-LITE.tar s1_odin_20100512.pit.
The phone has started, appeared teh stok galaxy s logo and it's just flashing. Help needed. Don,t know what to do know. I have galayx s i9000 european version.

somehow i've managed to install new firmare 2.2.1 /I9000XXJPY-baseband /2.6.32.9 [email protected] #1-kernel version, but z4root isn't working. When i start permanent root the programm ends on aquiring root shell, the debug mode is on

Got it all running, installed Darky's rom 9.3. Thanks anyway.

theduckking said:
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
Click to expand...
Click to collapse
Yep, I can boot into download and recovery modes, but that's it.
The only apparent change in the new custom ROM was the kernel.
I also cannot really access my external SD card (it shows me some phantom files, but not the actual content of the SD), otherwise I'd try to recover it this way.
I agree with the hardware issue, if it wouldn't have coincided with the flash procedure...anyway, I think I'll send it in for repairs if I don't get it to run on this sunday.

I have the exact same problem, except that I can access my external SD. I got the problem after upgrading to Darkys Rom 9.3 the usual way, but switched from Speedmod to Voodoo. After that update, my USB didn't work anymore.
I can't get neither Xp or Win 7 to recognize my phone. USB device not recognized, and tried all the tricks. Reinstalling Kies and drivers, switching between the different modes (storage, kies media, ask, debug...) But still no USB connection.
I updated to darkys 9.5 (transferring the rom using bluetooth, and updating using CWM), but still it doesn't work.
Can get it into download mode, but still can't connect using USB and Odin.
HELP!
Did anybody ever find a solution for this?
European version of I9000, bought in Denmark. No Simlock

Same thing here after installing JV1 + Ultibread Rom 1.4... Still no solution

*shameless push*
Any solution here? I dont have that problem, but it sounds too scary to not have a working solution :S

Same prob here! Any news?

Any solution? I have the same problem.

same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode

bassem8246 said:
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
Click to expand...
Click to collapse
But if you are in download mode on your fone you'd rather should have a look at your configuration on the computer. Because the fone still can be flashed if the symbol for download still appears.
- Kies is shut down while ODIN is active?
- latest Samsung USB driver installed?
- Odin started with Admin?
Btw. did you try to get into recovery mode? Maybe this also still is working as the partition is quite small and chance high that it was flashed w/o faults. So you may be able to flash a zipped ROM rather than a tarball for Odin.

USB Not working when Phone plugged in... try these..
Unplug Device from PC..
Windows go to Device Manager...
Scroll down to Universal serial bus Controllers
Start with the top one and work your way down ..uninstall them all..
When done reboot Computer and let it install them all.. then try again
2.Settings --> USB Setings (under wireless & network may differ depending on Rom used) --> Try other settings Mass storage
3.Different USB ports on PC
4.Uninstall KIES from PC (reboot PC to take effect) and Reboot and just install samsung USB drivers....
5.Using windows type in msconfig in Start>Run box... windows will pop up and untick KIES from STARTUP TAB
Apply to take effect and restart machine.. try using ODIN to Flash ROM
I myself only use the Samsung USB drivers and ODIN never use KIES
or ...Check my signature and try SD formatter