Database Develop

Some help please - flashing x1 to Touch-IT

Hi,
I was really hoping to do this without having to ask for guidance!!
I have backed up my ROM via Kovskykitchen: all OK and nice clear tutorial! thx..
I have X1_HardSPL_V1 ready to run..
I have the Touch-IT Experience ROM..
I think I follow the process but have a question about HARDSPL : Once I have completed the process - will I be able to use the phone at that point - or will I have to flash a new ROM to use it? i.e. is HARDSPL just an unlock so to speak or does it wipe the phone?- been reading this very helpful thread http://forum.xda-developers.com/showthread.php?t=446070 by Phenx - ta..
Flashing the new rom:
all the detailed tutorials seem to be the MicroSD method.. I can't find a decent X1 walkthrough using activesync...
Can anyone point me in the right direction? I'm obviously searching wrong..
Thanks!!
(One other question: will flashing affect my sim contacts? Thanks)

I'll try and answer ur questions to the best of my ability but i can't say i know much about what hardspl is besides the ultimate tool
After you hardspl u will be able to use ur phone as normal. I believe it still has the same stock rom on it but again i'm not sure but i do know u will be able to use it.
There is a way to use activesync and its fairly simple. Establish a connection through activesync and then run the rom update utility and follow the instructions. This is the only method i've ever used and i've been flashing my phone since the wizard.
Hope this helps

Thanks, thats given me a little more confidence
What flash util would you recommend? or do you mean the one with the HARDSPL download?

I would suggest backing up your contacts to your sim card, pull your memory card and then flash AFTER you hrdspl the phone. The hrdspl enabled you to be able to flash the phone to another rom, it will not interfere with the operation of the phone afterwards.
WC

x1tom said:
Thanks, thats given me a little more confidence
What flash util would you recommend? or do you mean the one with the HARDSPL download?
Click to expand...
Click to collapse
Most ROM's are packed together with the flash prog. I do recommend the microSD method, as it's less prone to murphy's law.

always use the sd way, it far by the safest.
your sim contact will be left on the sim the other contacts yo want to backup.
hardspl is a unlock only utility, wont affect your phone, rom.

ive done it throught the sd way ...and its really simple and no problems, i had a few problems with hardspl ...but got that sorted quick enough.
yeah so i'd recommend the sd way.

Well don't have a microSD so did it via activesync...
HARDSPL - was painless - click - click, go make coffee - done!
I mistook the ROM update in the Touch zip for another HARDSPL.. It was infact (obviously) the update util needed.. Flashed to Touch-it .21 - As easy as HARDSPL....
I have noticed 1 bug but its a tiny thing: the ok or x in the top right doesnt show when in any menu... Hard reset didnt fix it.. no problem though as the OK or x is there just not lit up..
Can anyone confirm that to change to another ROM, I would just replace the RUU file in the update util folder?
Thanks for everyones help!

x1tom said:
I have noticed 1 bug but its a tiny thing: the ok or x in the top right doesnt show when in any menu... Hard reset didnt fix it.. no problem though as the OK or x is there just not lit up..
Can anyone confirm that to change to another ROM, I would just replace the RUU file in the update util folder?
Thanks for everyones help!
Click to expand...
Click to collapse
yes to the second, just replace the RUU.
and I'd recommend trying wktask http://soft.photoracer.net/docs/wktask_en.html
instead of the taskmanager. (disable the task manager through settings) then you can make the X pretty and useful!

well thats the icing on the cake!! cheers - worked a treat.. thanks all

fards said:
yes to the second, just replace the RUU.
and I'd recommend trying wktask http://soft.photoracer.net/docs/wktask_en.html
instead of the taskmanager. (disable the task manager through settings) then you can make the X pretty and useful!
Click to expand...
Click to collapse
I thought it'd make a nice app for me, but it doesn't work well. Messes up my entire top bar.

Angelusz said:
I thought it'd make a nice app for me, but it doesn't work well. Messes up my entire top bar.
Click to expand...
Click to collapse
have you changed the preferences?
i use 52-280 icons only, disable force 3d theme

smaberg said:
always use the sd way, it far by the safest.
...
Click to expand...
Click to collapse
flashed my phone like 10 times now and NEVER used the SD version.
so from my point of view ... usw the USB version. saves loads of time.
plugin USB
sync if not allready done
start update and click a few times
done

download file on x1, save to sdcard,,,,, rename flash, much easier doesnt require windows pc can be done anywhere and less chance of failure
must have flashed different devices well over 100 times

probably a stupid question, but right now i have the Touch-IT 2.1 rom on my phone, if i want to Flash to another ROM, i don't need to flash to HardSPL again do i then flash to another rom?
EDIT: don't worry found the answer.

narutoramen said:
probably a stupid question, but right now i have the Touch-IT 2.1 rom on my phone, if i want to Flash to another ROM, i don't need to flash to HardSPL again do i then flash to another rom?
EDIT: don't worry found the answer.
Click to expand...
Click to collapse
Wouldn't hurt to say the answer, i am looking for the answer to that question lol.
so?

Ooops! Misspost.

fards said:
have you changed the preferences?
i use 52-280 icons only, disable force 3d theme
Click to expand...
Click to collapse
Decided to give it another chance. Your 52-280 helps, but it still looks kind of crappy with a gray bar on top, no other settings changed.

Angelusz said:
Decided to give it another chance. Your 52-280 helps, but it still looks kind of crappy with a gray bar on top, no other settings changed.
Click to expand...
Click to collapse
mm what theme are you running?
Mine is pure black.. or do you mean the battery strip right along the top?

rotsu said:
Wouldn't hurt to say the answer, i am looking for the answer to that question lol.
so?
Click to expand...
Click to collapse
you dont need to falsh HardSPL again.

Returning to Stock for repair! URGENT

Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody

To add an update, the boot loader screen shows:
BLAC100 32M
SPL-1.56.OliNex
Micro-Blackstone (LED) v6
Thought this might help in finding out how much work to stock?

I Think u need the original rom... or a htc one from the website?? ... can it not be downloaded from the htc website?? i may be wrong

I do but also need to make sure I do an original spl and radio as well

first off go to htc.com and download the romupgrade thats on that side (ive non is on the side check the wiki for youre countryrom)
then flash that one and se ive radio comes with it
ive not flash radio 13.**.**.**
then from the hard spl thread there a tut how t make youre spl stock again and youre finished

This is the last official ROM with 1.56 spl and 1.13 radio
h..p://rapidshare.com/files/231263089/-HTC_Touch_HD-MR_2009-RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe

Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?

J7ody said:
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
Click to expand...
Click to collapse
At boot it shows, just restart your device and look at the red text in the bottom right corner, there it will show your current radio version.
Could also see it in device info when the device is on but dunno if you still can considering you need to return it.
gl.

Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off

anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....

Curious????
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I also have read a couple of these help requests and the same problem, but what could it be, is it the windows mobile 6.5 builds that are doing this (not blaming the chef's in anyway), or some conflict with the spl... have to investigate this more...

imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?

Returning to Stock for repair! to having screen problems after changing the rom
J7ody said:
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
Click to expand...
Click to collapse
dataSaMm said:
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Click to expand...
Click to collapse
Hi, can someone (Admin) change the title of this thread from Returning to Stock for repair! to Having screen problems after changing the rom?
I think the first is solved and now we have this new problem in hand.
best regards

+1
i've had the problem with a cooked french rom (Pyrana V17C). My screen started to freeze for a few seconds. During that time, when I put the finger on the screen and slide, the screen follows the move but it comes back to where it first was, ant the move is finally not taken in consideration ... it looks like the screen is an elastic...
So it did it sometimes and it lasted a few seconds first, and then, a couple af days later, it was more often, and I had to soft reset everytime, and yesterday, I finally had to hard reset to take back the hand, and the bug came back more quickly. So I installed the latest release of this rom this morning and everything seems to be stable since a couple of hour. If it comes back I'll try another rom, but if someone can find a way to set this, that would be perfect ...

J7ody said:
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
Click to expand...
Click to collapse
You've found your solution to original query and returned device to stock rom & SPL. Thread has now run its purpose
Thread closed

Impossible?

Hi
I've a big problem!!!
I don't know why i can't instal certain ROM like SuperEclair 2.1 JitHack by Lfd-signed!!!
My G1 is rooted, i've installed Hard SPL
and i've ClockworkMod Recovery (before it was Recovery-RA-Dream)
but i don't know why it can't install!!!
When i install the SPL required, after intallation of the ROM, my smartphone freez on "-T--Mobile- G1" logo
I must root again it
Please HELP!!!

WaveMaster1406 said:
Hi
I've a big problem!!!
I don't know why i can't instal certain ROM like SuperEclair 2.1 JitHack by Lfd-signed!!!
My G1 is rooted, i've installed Hard SPL
and i've ClockworkMod Recovery (before it was Recovery-RA-Dream)
but i don't know why it can't install!!!
When i install the SPL required, after intallation of the ROM, my smartphone freez on "-T--Mobile- G1" logo
I must root again it
Please HELP!!!
Click to expand...
Click to collapse
Oh my goodness.. Your not supposed to keep flashing the spl over again.and you not supposed to flash it over the rom. Once you have the spl flashed, thats it. you dont have to flash it again.Wipe your data, dalvik, and ext partiton. i reccomend installing amon-ra recovery. Once you do that, flash the rom. and reboot.

stick with RA recovery...
and follow the instructions above..

If it's stuck on the G1 screen, then you have a brick my friend. There is still nothing you can do about it, even though some people have been able to unbrick.

mejorguille said:
If it's stuck on the G1 screen, then you have a brick my friend. There is still nothing you can do about it, even though some people have been able to unbrick.
Click to expand...
Click to collapse
Well, there IS something you can do about it. Though, judging from his post, it sounds like he doesn't have the expertise to do so (This is based off of one post however and I could be completely wrong)
I think it's the face

JAguirre1231 said:
Well, there IS something you can do about it. Though, judging from his post, it sounds like he doesn't have the expertise to do so (This is based off of one post however and I could be completely wrong)
Click to expand...
Click to collapse
That's just cruel JA XD bet it's an April fools joke 0o lmfao of course it better not be

I believe I know what he is talking about although I cannot help hiim with his situation. He has not bricked his phone. He is referring to the fact that when he tries to flash certain ROMs it just gets to the G1 logo on the first boot. I am having the same problem on the recent mods of the Supereclair rom I introduced (since 2.2). He can remove his battery and then go into recovery mode to either nandroid back to another ROM or flash a new one (at least, I can )
This doesn't make it any less frustrating with the ROMs that do this however. If anyone knows of a solution to this, I am sure we both would appreciate it.

So he reflashed the Hard SPL in hope of....

unkleremis said:
I believe I know what he is talking about although I cannot help hiim with his situation. He has not bricked his phone. He is referring to the fact that when he tries to flash certain ROMs it just gets to the G1 logo on the first boot. I am having the same problem on the recent mods of the Supereclair rom I introduced (since 2.2). He can remove his battery and then go into recovery mode to either nandroid back to another ROM or flash a new one (at least, I can )
This doesn't make it any less frustrating with the ROMs that do this however. If anyone knows of a solution to this, I am sure we both would appreciate it.
Click to expand...
Click to collapse
Thanx dude! I believe that you understand me very well despite my low level english.
I am French. Understand me guys!
In fact my phone is not bricked (since i can access the SPL and Recovery)
I always use a Super D's ROM.
But the problem is that i can't install some ROMs as SuperEclair 2.1 JitHack by Lfd-signed and many others.
When i try with RA-dream and Hard SPL, i get an error.
And when i try an installation with RA-dream and Haykuro's SPL, the installation proceeds without error, but my phone still planted on the logo "G1".
I must have to restart all again by reflashing with "DREAIMG.nbh", then rooted it.
If anyone has a solution, it will be welcome!

WaveMaster1406 said:
Thanx dude! I believe that you understand me very well despite my low level english.
I am French. Understand me guys!
In fact my phone is not bricked (since i can access the SPL and Recovery)
I always use a Super D's ROM.
But the problem is that i can't install some ROMs as SuperEclair 2.1 JitHack by Lfd-signed and many others.
When i try with RA-dream and Hard SPL, i get an error.
And when i try an installation with RA-dream and Haykuro's SPL, the installation proceeds without error, but my phone still planted on the logo "G1".
I must have to restart all again by reflashing with "DREAIMG.nbh", then rooted it.
If anyone has a solution, it will be welcome!
Click to expand...
Click to collapse
If you read the requirements of most 2.1 roms they will state that you need Haykuro's SPL (aka Danger, Death). Now that you have installed the SPL (and hopefully you have the right radio) reboot back to recovery, wipe your ext partition (preferably ext 3 since not all support ext 4), wipe your data and dalvik-cache, reflash the 2.1 rom, plug it into your computer and run ddms.bat and click to bring up the logcat. If it seems to get to a point where it loops over and over again and your device doesn't boot click cancel and copy the contents of the logcat and post it here. Someone will help you figure it out. Good luck.

Binary100100 said:
If you read the requirements of most 2.1 roms they will state that you need Haykuro's SPL (aka Danger, Death). Now that you have installed the SPL (and hopefully you have the right radio) reboot back to recovery, wipe your ext partition (preferably ext 3 since not all support ext 4), wipe your data and dalvik-cache, reflash the 2.1 rom, plug it into your computer and run ddms.bat and click to bring up the logcat. If it seems to get to a point where it loops over and over again and your device doesn't boot click cancel and copy the contents of the logcat and post it here. Someone will help you figure it out. Good luck.
Click to expand...
Click to collapse
Thanx bro, i'll try it now!

*Bricked G1*
It's GAME OVER for me!
I've only my eyes for cry!!! :'(

WaveMaster1406 said:
*Bricked G1*
It's GAME OVER for me!
I've only my eyes for cry!!! :'(
Click to expand...
Click to collapse
What did you do? :S

protomanez said:
What did you do? :S
Click to expand...
Click to collapse
I've flashed my SPL to Danger SPL and my Recovery to RA-dream.
and i've forgot to upgrade my radio to 2.22.19.26I first.
Now this is my result: G1 frozen on "G1" logo and wont go to Bootloader or Recovery!!!!
It's over for me!!!

WaveMaster1406 said:
*Bricked G1*
It's GAME OVER for me!
I've only my eyes for cry!!! :'(
Click to expand...
Click to collapse
I guess you didn't read this part of what I said:
"Now that you have installed the SPL (and hopefully you have the right radio)..."
I'm sorry that you bricked your phone. Look at the bright side:
G1 phones are getting cheap (REAL CHEAP)
Depending on how long you had it you can upgrade to another device (WARNING: No full custom roms for the new mytouch yet)
I know that it's not much of a bright side but hey what else can you do.
Possibly purchase a G1 online with a cracked screen and swap out either the screen/digitizer or the motherboard of the two devices. Worth a shot.

Bro thank you for your compassion! (YES)
It's like a balm that you put me on the heart, because it really hurts to lose something that you really consider!
But know that I did not do it on purpose. I simply forgot to upgrade the radio after having downgraded it(I reflash it with DREAIM.nbh), and I flashed the SPL (Danger SPL)!
So I was euphoric!!!
That I was stupid!!!
Thank you for your advice, but I think I'll opt for a Magic or a Hero
until I have enough to buy a Nexus One!
Life goes on ...

WaveMaster1406 said:
Thanx dude! I believe that you understand me very well despite my low level english.
I am French. Understand me guys!
In fact my phone is not bricked (since i can access the SPL and Recovery)
I always use a Super D's ROM.
But the problem is that i can't install some ROMs as SuperEclair 2.1 JitHack by Lfd-signed and many others.
When i try with RA-dream and Hard SPL, i get an error.
And when i try an installation with RA-dream and Haykuro's SPL, the installation proceeds without error, but my phone still planted on the logo "G1".
I must have to restart all again by reflashing with "DREAIMG.nbh", then rooted it.
If anyone has a solution, it will be welcome!
Click to expand...
Click to collapse
Salut a toi
As tu lut mon dernier post sur SPF ?
have you see my last post on the SPF ?
see you

lefeudedieu said:
Salut a toi
As tu lut mon dernier post sur SPF ?
have you see my last post on the SPF ?
see you
Click to expand...
Click to collapse
I can't retrieve this topic on SPF!!
je ne retrouve pas ton sujet sur SPF

Please Please someone help me! tmobile uk g1

Hi all,
I’m in desperate need of some of your wealth of experience, i have managed to root and flash my g1 with - rc9 JFv1.51_CRB43-EU.zip (Jesus freke), and recovery-RA-dream-v1.6.2.img recovery image!. Now i want to update to a newer rom!
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?. Do i need to install anything else before updating to Open Eclare 2.1.1 or SuperD1103-blk.? I’m in the UK with a UK g1 mobile if that makes a difference?

crusader0071 said:
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?.
Click to expand...
Click to collapse
Just use the top three wipes available in Anon's recovery menu: Wipe System/Data (1st), Davilk Cache (2nd), Ext Partition (3rd). If you haven't partitioned your SD card into FAT32, Ext2, 3, or 4 and Linux-Swap, do so now with the Recovery menu. You must backup your fat32 first, because a total repartition will totally blank your data. Good luck!

crusader0071 said:
Hi all,
I’m in desperate need of some of your wealth of experience, i have managed to root and flash my g1 with - rc9 JFv1.51_CRB43-EU.zip (Jesus freke), and recovery-RA-dream-v1.6.2.img recovery image!. Now i want to update to a newer rom!
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?. Do i need to install anything else before updating to Open Eclare 2.1.1 or SuperD1103-blk.? I’m in the UK with a UK g1 mobile if that makes a difference?
Click to expand...
Click to collapse
Make sure you partition your sd card and then try like the above said....or maybe try flashing death spl.
http://forum.xda-developers.com/showthread.php?t=625886&highlight=Death

thanks for trying to help but....
hi thanks for your help but ...
i have partitioned the card via anons recovery flasher, i have set my 8gb to 96mb swap , 1.5gb ext2 and the rest is used for fat32.
i have also gone throught the menu and deleted / erased the top 3 as requested but when i install a new rom it still freezes on the g1 welcome screen? please help!

G1ForFun said:
Make sure you partition your sd card and then try like the above said....or maybe try flashing death spl.
http://forum.xda-developers.com/showthread.php?t=625886&highlight=Death
Click to expand...
Click to collapse
hi i just noticed im using Hard Spl update at the moment ? how do i update to Haykuro?

i think i have totaly broke my phone? - i downloaded haykuros spl and flashed it via the anons recovers flash image from sd card, and now i can no longer get in to the recover menu? and no fast boot please please help me !

crusader0071 said:
i think i have totaly broke my phone? - i downloaded haykuros spl and flashed it via the anons recovers flash image from sd card, and now i can no longer get in to the recover menu? and no fast boot please please help me !
Click to expand...
Click to collapse
This is YOUR FAULT for NOT READING!!!!
You installed an SPL meant for an HTC MAGIC onto your HTC DREAM. It *CAN* be made to work, HOWEVER, you failed to read and understand what is required to actually do it safely.
SPECIFICALLY, you are stuck in boot mode 3 -- boot to recovery, and because you changed the SPL, your recovery partition is UNABLE TO BOOT.
You are BRICKED, and the only way out is to use a hardware interface called "JTAG", which requires you to disassemble the phone.
SPECIFICALLY:
You missed the part of that thread that says "MOD EDIT PLEASE READ THIS THREAD FOR UP TO DATE INFORMATION".
I have no sympathy for you. That instruction is in big purple letters.

hi thanks for your info, do you know anyone or anywhere i can get my phone jtagged?

How could you mess it up with step by step instructions....lol...I am being dead serious....it doesn't get more clear than this.
IMPORTANT: Before going any further make sure that you have PVT board. You can do this by rebooting your phone and holding the camera button. The first line should say "PVT" if you see "DVT" then DO NOT flash this because odds are you will get a brick but If it says "PVT" then you are good to go.
First you are going to need to download the latest radio and the SPL. both can be found here http://code.google.com/p/sapphire-port-dream/ There is also a new radio that is compatible that can be found here http://forum.xda-developers.com/showthread.php?t=640535
Prior to starting the installation process please make sure that your battery has a good charge. Also DO NOT pull your battery out at anytime during the installation process. I know it seems like common sense but I read a thread where someone had pulled their battery in the middle of the installation process and they ended up with a brick.
Now that all that's out of the way lets get started!
1. Copy "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" and "spl-signed.zip" onto the root of your SD card.
2. Reboot into recovery. I suggest using the RA-dream recovery you can download it here http://forum.xda-developers.com/showthread.php?t=566669
3. Wipe your phone "factory data reset" (this step isnt really necessary since your phone is wiped after flashing the SPL but I always like to wipe before flashing anything)
DO NOT SKIP THIS NEXT STEP OR YOU WILL BRICK YOUR PHONE
You must have the latest radio "2_22_19_26I" or "2_22_23_02" to flash this SPL if you already have the latest radio you should not have to flash it again but it will not hurt if you do flash it again. When in doubt flash it anyway.
4. Flash the Radio "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" it will install and then it will ask you to reboot to finish the installation, so reboot, it will then finish installing and then reboot back into recovery.
5. Flash the SPL "spl-signed.zip" it will install and then ask you to reboot to finish the installation, so reboot, it will then finish installing and reboot into recovery so you can flash your ROM

i cant get in to fast boot or recovery i just get the g1 screen, if i press camera and power or if i press home and power i just get the g1 nothing else

crusader0071 said:
i cant get in to fast boot or recovery i just get the g1 screen, if i press camera and power or if i press home and power i just get the g1 nothing else
Click to expand...
Click to collapse
Did you follow those steps when flashing the SPL? Did you even flash the radio before flashing the SPL?
It sounds like you have no idea what you did to your phone which is never a good sign (and usually means you shouldn't even be flashing custom radios/spl's/roms)

no i did not, i was asking for help for the last 2 or 3 days? i did what i thought was right but it was not. can i fix it or not?

heres what you do
ive did this too lmao jus go here www*androidhustler*blogspot*com ( THE * ARE REPLACEMENTS FOR . BECAUSE I CANT POST A OUTSIDE LINK SO U GET WUT IM SAYING SWITCH THE * WITH A . ) THEN SCROLL DWN TO A POST CALLED THE 2010 HOW TO GET CYANOGEN LATEST. DO ALL STEPS AND DONT RUSH. IF YOURE G1 DOESNT BOOT UP PROPERLY THEN I QUIT THIS SHYT BRO. LOL FOR REAL AND IF U HAVE ANY QUESTION EMAIL ME AT [email protected]*COM

crusader0071 said:
no i did not, i was asking for help for the last 2 or 3 days? i did what i thought was right but it was not. can i fix it or not?
Click to expand...
Click to collapse
Sigh....I would go buy another phone off Craigslist or something similar.
Next time...please read before flashing....Although I'm sure you will after the last mishap.

the only way to fix your phone is to buy a doner phone with a broken screen or something cheap off of ebay
there is NO KNOWN WAY to fix it without a doner (the jtag method isnt do-able yet)

I know here in town...there are so many G1's up for sale around the $150 mark in really really nice condition.
That's where I'd be looking if I bricked my G1. Well...I'd be replacing it with a HD2 probably...lol

garok89 said:
the only way to fix your phone is to buy a doner phone with a broken screen or something cheap off of ebay
there is NO KNOWN WAY to fix it without a doner (the jtag method isnt do-able yet)
Click to expand...
Click to collapse
What do you mean by jtag method isn't do-able?
ezterry did mine without an issue.

details
Sleeepy2 said:
What do you mean by jtag method isn't do-able?
ezterry did mine without an issue.
Click to expand...
Click to collapse
have you got contact details for ezterry? if so pm me please.

as far as i can see the jtag is still in testing?

This noob is in the UK anyways. Let him figure it out.
Wrong section, soft bricked his own phone and freaking out.
Please READ. You are from the UK so your English isn't bad. You have no excuse for not following instructions.
Ways to fix your phone:
1) motherboard replacement
2) JTAG (experts are not anywhere near you though)
3) buy a new phone
Mods please get this out of here

[Q] an idiot newbie desperately in need of help

can anyone advise if there is a stable froyo rom on here in 'zip' format
that does not need any radio/hardspl/ or recovery tweaks beforehand ? (hopefully with GPS, BT, Wifi, Camera etc working)
I genuinely have sweated blood over the last 3 days trying my best.
I have read all the guides, tried using ADB, Fastboot, Terminal Emulators etc
and for various reasons have always managed to crash and burn.
I really was after Lazlo's Froyo, but could not even get the Radio and Hardspl he advised on to the phone !
in desperation. I tried it anyway, and was very close to bricking the phone.
(thankfully though the help on here got me out of being stuck in fastboot)
I failed, even with the guide below ... as it said no room on device !
http://www.webnetta.com/2009/01/02/t-mobile-g1-rc30-to-jfv13/
I plead for a simple zip that I can apply via clockwork as I can manage that method ok.
I have found loads of zip files here:
http://www.filecrop.com/android-2.2-froyo-G1.html
would any of these be of help
anyone ?
thanks in advance

First of all what is your current state on the G1? (IE: SPL, radio, etc...)
And do you really want the froyo ROM to be loaded on your G1 only, or any would do to get your G1 up and running?

thanks for the response ...
the phone is currently running ok on the original 1.6 rom, but I had managed an spl update on it.
fastboot shows:
Dream 110 PVT 32B
HSPL.95.3000 (was hboot 0.95.000)
CPLD -4
Radio 2.22.19.261
Oct 20 (28?) 2008
in settings:
Firmware version 1.6
Baseband version 62.505.20.17U_2.22.19.261
Kernal version
2.6.29-00479-g3c7df37
[email protected] #19
Build number
DRC92
I don't know if all this is original as the Lazlo rom seemed to go on via clockwork,
but then hung, and somehow I got back booting to 1.6
ideally I would like to get Froyo on it

Have you look at [ROM] Froyo 2.2.1 for T-Mobile G1 " Froyo for Trout! " F4T1.8.2 (01/19/2011). You will have to load the SPL and radio that is related to the ROM. And it's Froyo.

sadly that was the one I previously went for.
I did the sdcard ok, but could not get the radio & spl images flashed to phone with either adb or emulator whatever I tried.
usb drivers are on ok, I have the sdk, and despite showing up in windows device manager, and connecting fine when mounted,
adb will not connect to device.
if this Radio and the SPL were available in zip, rather than .img format I could succeed.
I have really browsed all the roms in the Rom Bible link, but cannot find one that does not require these type of fixes.

I was having the same problem with mine the other week. I could not use the img file so I had to mannually search for those zip files.
Afterward this is what I found. See if that helps.
HERE ARE THE DOWNLOADS FOR NEW SPL/RADIO RAM HACK!!!!!
http://cdn.movilzona.es/repos/superatmel/ROMS/superblerv1/15M/hboot0013d-signed.zip
http://cdn.movilzona.es/repos/superatmel/ROMS/superblerv1/15M/radio-2_22_27_08-signed.zip
Click to expand...
Click to collapse

the links unfortunately give me a 404 !
John Denver once sang
'Some days are Diamonds,some days are Stone'
with my luck lately I suspect I was born in a quarry !

@beandroidized
maybe it was a diamond quarry after all !
I got the filenames (radio-2_22_27_08-signed.zip & hboot0013d-signed.zip)
from those dead links, put them into google and got them both via Mediafire !
so thanks a lot there my friend,
I'll have a go at flashing both, and the Laslo rom, tomorrow afternoon and will let you know how I get on.
regards,
Kevin

Good for you. And you are welcome. Good luck.

@beenandroidized ....
everthing did go well and I have now got Froyo !
sorry for late reply as I have been a bit under the weather last few days

carkev said:
@beenandroidized ....
everthing did go well and I have now got Froyo !
sorry for late reply as I have been a bit under the weather last few days
Click to expand...
Click to collapse
No worry, I figured you had a good turnout after the last post. Thanks for the updates. Enjoy!!!!