Related
Hi there to everybody. i have a Tmobile G1 :
Installed Htc Hero Sense, Firmware version is 1.5. I have 1gb micro sd card on it when i root the phone. now i am replacing it with 8gb micro sd card.
every time i put the 8gb sd card on it, the phone keeps freezing and will not continue to boot up. i then returned the 1 gb sd card and the phone is working properly. how can i change the sd card to a bigger capacity without the phone freezing? do i have to re-root and restart the whole process on the phone? any help, guides will help. Thank you in advance.
......umm...lol..imma leave this one alone
just copy the content of the old sdcard, some Hero rom store some info there
it wont hurt to try it
also, did you have any partitions on the old sd?
partition your sd card and flash a 1.6 rom with auto a2sd
I did try to copy the whole contents of the sd card, but it does same thing, freezing and it wont boot up.
using 1 gb flash the Amon RA recovery image....and then do a Bart Backup...this backup will backup all your apps and also the rom..then put that backup file and put into the new sd card...and then go into recovery and do a bart restore....
Qjizzle said:
partition your sd card and flash a 1.6 rom with auto a2sd
Click to expand...
Click to collapse
Um...partly true but you don't need to install a 1.6 donut ROM
TO OP
You have to repartition your SD card (~7400 MB Fat32, 512 EXT3, 96-128 Swap?) whichever you want.
If you want to reinstall all your paid/free apps, then you will have to back them up on your 1 GB card using a backup app (App manager, astro) or just use Mybackuppro if you want to back up everything (contacts, data, etc)
transfer the backupped files back onto your newly partitioned 8 GB card. Boot up the phone with the new card in it, and reinstall all your apps
OR the easier way (but you lose all your data)
Partition card
wipe phone/dalvik/ etc
fresh Reinstall
The old sd card appeared to be partioned.
you need to make sure your swap and ext. partition is the same size as the one you have on your old one. ex. if your 1gb have 96swap, 512ext. then your new one should have the same swap and ext size. rest goes to fat32. First thing you should do is do a nan + ext. backup using the recovery image. Then copy everything from the old SD card to the new SD card. Then do a nan restore. That should restore everything on your phone plus whatever is stored in the ext. partition. The likely cause of your phone freezing is because the stuff in the ext. partition is not there anymore.
mr2t32 said:
you need to make sure your swap and ext. partition is the same size as the one you have on your old one. ex. if your 1gb have 96swap, 512ext. then your new one should have the same swap and ext size. rest goes to fat32. First thing you should do is do a nan + ext. backup using the recovery image. Then copy everything from the old SD card to the new SD card. Then do a nan restore. That should restore everything on your phone plus whatever is stored in the ext. partition. The likely cause of your phone freezing is because the stuff in the ext. partition is not there anymore.
Click to expand...
Click to collapse
what he said
when i got my mytouch coming from a g 1i simply did what the guy did above me and with amon_ra's recovery its very simply
The Unlockr.com has a tutorial thats very helpfull if you need a visual. I was a nubie once and visuals always helped.
I lost my sd card data flashing a rom. Could not mount it even thru recovery. Got a card reader, but it won't format it.
Using Mini Partition Tool to troubleshoot. I am not at a point where it shows three partitions. The main 16gb unallocated, logical. The ext3 unformatted 500mb, primary (think I did that by mistake when trying to recover partition). And a 32mb unallocated, logical. All zero used memory.
I need to get back to one partition allocated, primary. Then I can get sd data back on it and reformat thru recovery.
Again using Mini Partition Wizard
Any help please!
OK,
I got it repartitioned as primary and formatted, bu sd card from pc now.
Hope phone recognizes it.
Will update, if I need further help.
Ken
If you want a good program to format your sd card, try SD Formatter.
Download and install that, plug in your sdcard into your sd card reader and format it.
Choose Full Erase On (if possible) and Resize On. It will format your sdcard to factory default and that means even the ext partition will be gone too.
Well, all transferred. Still won't mount. Says can't mount either of the dev/blocks mmcb1k0p1 and mmcb1k0.
Staus bar says sd card damaged.
?????
musashiken,
Thanks, typing while you posted. Based on my last post should I still do that?
Ken
Yeah I think you should try to reformat again with the program I suggested, as that will full format your sd card.
Once done, put your sd card back to the phone and create ext partition in recovery.
At work now but will be working on it.
Thanks
Ken
musashiken,
Thanks, appreciate all your help
That program worked, and I am back up and running
Ken
Glad it worked for you. My sd card kept giving me problems and I have to use this every few rom flashes.
I have a similar problem. I installed a new 32 gb SDHC card in a CDMA Hero running Cryogenmod. All was working well for about 10 days, then I got an error that no SD card was found. I had the original card and tried to get to the Clockwork recovery, no luck. Finally, through Rom manager, (flash alternate recovery to Ramon, then back to Clockwork, I was able to boot into recovery.
I still cannot format the new SDHC card, through Recovery, Windows 7, or the Panasonic program listed above. The Windows format option sees the card as a FAT 121mb card, so does the above program. Is this new card toast? It came with a lifetime warranty from Kingston, but I am mad that it did not make 2 weeks.
Any help would be greatly appreciated.
Craig
If sdformatter did not work it may be bad.
I always had good luck with it.
Did you have all options set per instructions?
if you're having trouble partitioning your sd card back to fat32 after you root using nooter, try the method here. what that guide tells you is to basically use this program to enable the Delete Partition menu option in Windows Disk Management, if it's grayed out.
i was going crazy trying to partition my sd card until i found this info. hope it helps.
Unless you need to make separate/multiple partitions, there's a much easier way to do this.
Follow the steps to root your nook. Once those are done, and the nook is all rooted and booted, take your SD card as is, put it back into the Nook, then go to:
(this is from memory so feel free to correct me)
Press the button to pull up the context menu with device settings
Then go to device info
Then click on SD card
Click on 'umount sdcard'
Then click 'format sdcard'
And voila! You're done. The SD card has to be put back into the Nook AFTER it's booted, otherwise it will try to boot off the SD card when you turn it on.
tokyomonster said:
Unless you need to make separate/multiple partitions, there's a much easier way to do this.
Follow the steps to root your nook. Once those are done, and the nook is all rooted and booted, take your SD card as is, put it back into the Nook, then go to:
(this is from memory so feel free to correct me)
Press the button to pull up the context menu with device settings
Then go to device info
Then click on SD card
Click on 'umount sdcard'
Then click 'format sdcard'
And voila! You're done. The SD card has to be put back into the Nook AFTER it's booted, otherwise it will try to boot off the SD card when you turn it on.
Click to expand...
Click to collapse
yes, you can format it, but it's still going to have a 40mb partition, because that's what the card is left with after rooting. assuming your card was larger than 40mb, you'll want to repartition it to get the full capacity of the card back.
Ben74 said:
yes, you can format it, but it's still going to have a 40mb partition, because that's what the card is left with after rooting. assuming your card was larger than 40mb, you'll want to repartition it to get the full capacity of the card back.
Click to expand...
Click to collapse
Are you sure? I'm not positive that's the case. I won't be able to verify until later this evening, but I'm pretty sure the SD card is just left with one partition using the full size of the SD card, and not with the 40MB partition, and then a partition with the remainder of the space.
I know for a fact that when I plug my Nook in, I only see the Nook's internal memory and 1 SD card partition get mounted. If the 40MB partition remained, it should show me the Nook's internal memory, and 2 SD card partitions get mounted, which is not the case.
Ben74 said:
yes, you can format it, but it's still going to have a 40mb partition, because that's what the card is left with after rooting. assuming your card was larger than 40mb, you'll want to repartition it to get the full capacity of the card back.
Click to expand...
Click to collapse
when you format the card using the nook it will fix the partition tables. i did this with my 4GB card and it worked fine.
tokyomonster said:
Are you sure? I'm not positive that's the case. I won't be able to verify until later this evening, but I'm pretty sure the SD card is just left with one partition using the full size of the SD card, and not with the 40MB partition, and then a partition with the remainder of the space.
I know for a fact that when I plug my Nook in, I only see the Nook's internal memory and 1 SD card partition get mounted. If the 40MB partition remained, it should show me the Nook's internal memory, and 2 SD card partitions get mounted, which is not the case.
Click to expand...
Click to collapse
yeah. the nooter method leaves the card with only one 40mb partition. you can format this partition to fat32 and you will see it in the nook, but it's still only 40mb. there won't be two partitions on the card. i did this myself. then i realized the partition was only 40mb, and that repartitioning is necessary.
califrag said:
when you format the card using the nook it will fix the partition tables. i did this with my 4GB card and it worked fine.
Click to expand...
Click to collapse
i see. so the nook is clever like that. very well, ignore my OP!
Partition/Format SD card
I used a 2GB (1.86GB usable)SD card to root my nook color and followed Tokyomonster's method of using the nook to format the SD card so I could get back the rest of the space available. Once formated the nook, as well as disk management in windows verified that the sd card was back to 1 partition with the 1.86GB of usable space.
Thanks Tokyomonster!!
Not as elegant or simple as using the Nook, but I use [email protected] Partition Manager (free, btw) and delete the existing partitions, then create a new one and format.
If for some reason you can't let the Nook reformat it, you can also insert the SD into a rooted android phone, and format it using Amon Ra Recovery. I did this before I found out that the Nook could do it.
There is also one additional method that you can use. I had to do this because I needed the SD card and the nookColor isn't available until after Christmas for me to use.
Basically, follow the instructions here: http://jaredheinrichs.com/how-to-delete-oem-partition.html
Then you'll be able to use the disk manager to create a partition for the entire sd card.
Searching the Nook forum for "repartition" tool or "partition tool" came up with nothing. Can you be more specific about its location? I'm in a hell of a mess right now. My entire partition table for mmcblk0 got wiped.
Hey all, I want to write a new image to what is currently a verygreen size-agnostic card, but Windows, EASEUS and the NC itself only see the boot partition. If I try to format it from Windows 7 x64, will it just wipe the partition, or format the whole card? Is there a way to do it from CWM?
I have:
verygreen's latest size-agnostic card running CM7.0.3 + dal's 4/24 OC kernel
the 3.1 beta running dal's 5/13 OC kernel on eMMC
the latest CWM on eMMC
EASEUS on my PC
I do not have:
another SD card
a card reader other than the NC
Obviously "get a card reader" and "get another card" are answers I could come up with myself. Do I have any options using what I have? The goal is to write racks' Phiremod/HC dual-boot to the card.
ETA: I am hesitant to attempt formatting from CM7 due to the big red letters in the dev thread for 3.1:
DO NOT FORMAT YOUR SD CARD IN CM7. DUE TO A VOLD ISSUE THIS WILL FORMAT YOUR /BOOT INSTEAD OF THE SD CARD!
****Should be fixed in nightly 13****
Click to expand...
Click to collapse
Does that still apply? Does it apply to the 7.0.3 build? Would flashing eMMC to CM7.0.3 and formatting the card be a possibility?
UPDATE [SOLVED]: As the final post says, the best method to revert a bootable card to storage seems to be, in EASEUS, deleting all partitions except the "SDcard/CM7 SDcard" partition, then dragging that partition to take up the unallocated space.
I use XP and using a USB adapter plug it in go to my computer right click on the drive which will say boot and click format. It takes about 5 seconds to format. Tou will get a warning. Not sure if it is the same with Win 7 but cannot see why it wouldn't format the same way.
Well, I did order a card reader from Amazon. This one seems like it may actually come in handy down the road and not be a one-use thing, and it should be here tomorrow. Maybe for experimentation's sake I'll do one last back-up and try formatting the card in the NC.
I can't sync my apps from Titanium + Dropbox until I get Titanium pointed at a bigger partition.
In the interest of completeness and for the unknown googler: Windows was incapable of formating any but the first partition of the card whether in the NC or a card reader. I tried "Wipe drive" in EASEUS, after which neither Windows Explorer nor the NC would recognize the card to format it. I wrote a new image to it (the HC/Ph dual boot) with WinImage, which worked fine. However, CM7 on the NC still only had access to the boot partition, and I needed more space so that I could sync Titanium Backup with Dropbox to restore my apps and settings from my old SD installation.
Again, there was no formating the partitioned card, so in EASEUS I deleted all the partitions except SDcard, extended that partition, and then formatted it in Windows. I was almost right--the last step was not only a waste of time, but rendered the card readable to Windows but not to CM7 or CWM. So, I once again wrote an image to the card, deleted all the other partitions, extended SDcard to to take up the unallocated space, and then jammed the card in the NC: success!
And Titanium Backup FCed whenever I tried to sync to Dropbox :/
Well, so be it. I manually replaced the Titanium Backup folder on the SD card with the one from my Dropbox, and it's almost done restoring now #knockonwood
Hi,
I just got myself a Nook Color with version 1.2 update and I am planning to root the device from a microSD Card with CM7 or Honeycomb. But before I start, I have two basic queries:
1. Which rooting will give a better and stable web browsing experience - CM7 (Gingerbread) or Honeycomb
2. Can I store and view my personal files (e.g, movies) from the microSD Card which will boot my Nook Color with CM7/Honeycomb? I am very concerned about this, as the Nook Color v1.2 comes with only 1 GB of free space for personal files storage and so I need to store my movies in mircoSD card. At the same time, I don't want to change the stock software thus violating warranty, so I have to root using a microSD card.
I am very new to this, so will appreciate your response very much. Thanks in advance.
Dazed378 said:
Hi,
I just got myself a Nook Color with version 1.2 update and I am planning to root the device from a microSD Card with CM7 or Honeycomb. But before I start, I have two basic queries:
1. Which rooting will give a better and stable web browsing experience - CM7 (Gingerbread) or Honeycomb
2. Can I store and view my personal files (e.g, movies) from the microSD Card which will boot my Nook Color with CM7/Honeycomb? I am very concerned about this, as the Nook Color v1.2 comes with only 1 GB of free space for personal files storage and so I need to store my movies in mircoSD card. At the same time, I don't want to change the stock software thus violating warranty, so I have to root using a microSD card.
I am very new to this, so will appreciate your response very much. Thanks in advance.
Click to expand...
Click to collapse
1. Without a doubt cm7. Honeycomb will unfortunately be forever buggy.
2. Yes you can use the left over storage on your SD card for files, music, videos, app etc.
And FYI you can root the internal memory and if you need to return for warranty then you can just return to stock and b&n will not know a thing but if you are going to run off the SD card make sure that it is a sandisk.
Sent from my NookColor using Tapatalk
The thing to remember if you want to access the 4th partitiion for storage is that you have to do it while the SD is in the NC. Win xp will only see the first partition which has only about 155 megs.
Thanks a ton! I have few more quick questions.
1. What is the most stable CM7 version for rooting 1.2 version Nook Color as of today?
2. Will the rooted nook be able to play AVI video files? What app I need to download for that?
3. I found that PDF page load is very slow in my Nook Color. What app do you suggest for a good reading experience?
Once again, thanks in anticipation.
1. 7.0.3 is the latest stable version of CM7, however, most people keeps up-to-day with nightly builds.
2. it should, if not, install Rock Player Lite, it plays virtually everthing
3. Either Adobe Reader or Alkido would do the job
Not able to copy files to uSD card which boots CM7
Hey thanks for your all your support. I was able to install CM7.0.3 on my 1 GB uSD card and also installed Adobe Reader and Moboplayer. Everything works fine, except when I connect my NC to my PC, and then turn on USB Mass Storage on NC, I can only explore my Nook Color (showing as F: drive) to copy files. I cannot open/explore my SD card, though the PC shows the uSD card as "Removable Disk (E. When I try open this E: drive, I get the message "Please insert a disk in E: drive".
Also, my NC does not seem to identify the SD card. When I go to Settings -> Storage, it shows total space unavailable under SD card. Even when I open Moboplayer, I get the message "There is no SD card, make sure it is usable". I could only play videos copied to my NC internal memory.
I was told that I can use the leftover space of the uSD card to copy personal files, but I have no success on that front yet :-(. Any idea/suggestions how to fix this issue?
More information:
In my NC Storage Settings, it shows:
1. SD card: Total space unavailable, Available space unavailable.
2. Internal storage: Total space 525 MB, Available space 449 MB
3. Additional storage (emmc): Total space 1 GB, Available space 63.51 MB
Wondering what is 2nd one (Internal storage)? Is that the data partition of my SD card? If yes, how can I copy personal files there?
Did you say you are using a 1GB uSD? IMO, that's way too small for what you want to do. I would recommend either a 4 or 8GB sandisk card to allow you enough space for files and the OS. Remember that this is also your boot disk and the cm7 files are taking up most of the available space on a 1GB card. Just sayin......
Sent from my NookColor using Tapatalk
I have ordered for a 16 GB class 4 SanDisk uSD card. I had a 1 GB uSD card at hand, so wanted to test with that first before I receive the 16 GB card. And as I said, I had no prob at all installing CM7.0.3 on the 1 GB card and if I am not wrong the card still has hunderds of MB memory free. My question is why can't I explore the SD card when I connect my NC to PC thru' the USB cable?
Dazed378 said:
I have ordered for a 16 GB class 4 SanDisk uSD card. I had a 1 GB uSD card at hand, so wanted to test with that first before I receive the 16 GB card. And as I said, I had no prob at all installing CM7.0.3 on the 1 GB card and if I am not wrong the card still has hunderds of MB memory free. My question is why can't I explore the SD card when I connect my NC to PC thru' the USB cable?
Click to expand...
Click to collapse
I don't recall the specific partition sizing of SASD but I would suspect there is no space available on the uSD after SASD creates the first 3 partitions... thus no partition 4 to be mounted as /sdcard.
Ok, thanks. As a mentioned in couple of posts back, any idea what is the "Internal Storage" of 525 MB total space that shows up in my storage settings? It is different from the emmc storage, because that shows up as the third storage option with 1 GB total space.
Ok - just found this thread and had to ask:
I'm running a stock 1.3 on the eMMC, and CM7.1 on a 16G micro-SD.
When I boot into the stock ROM, I see that my SD is mounted, but that the stock ROM mounted the /boot partition, rather than the /SD Card partition.
Is there a way to set the stock rom to boot /SD Card, or hide the other three from it?
Thanks!
traumadog said:
Ok - just found this thread and had to ask:
I'm running a stock 1.3 on the eMMC, and CM7.1 on a 16G micro-SD.
When I boot into the stock ROM, I see that my SD is mounted, but that the stock ROM mounted the /boot partition, rather than the /SD Card partition.
Is there a way to set the stock rom to boot /SD Card, or hide the other three from it?
Thanks!
Click to expand...
Click to collapse
To my knowledge, no, you cannot make the stock OS see any but the boot partition of the SD card. Both stock and your CM7 card can access eMMC storage, but stock can only see the first partition of your card. If you want a stock and a CM7 installation to share one /sdcard partition, you will have to set up a dual boot on internal storage (mine is linked in my sig).
If you just want to have some SD storage available to your stock install, you might be able to stretch the card's /boot partition and store some files in there, but I don't know if your SD install would remain stable. You could always back up your card as a disk image and try it out.
Taosaur said:
To my knowledge, no, you cannot make the stock OS see any but the boot partition of the SD card. Both stock and your CM7 card can access eMMC storage, but stock can only see the first partition of your card. If you want a stock and a CM7 installation to share one /sdcard partition, you will have to set up a dual boot on internal storage (mine is linked in my sig).
If you just want to have some SD storage available to your stock install, you might be able to stretch the card's /boot partition and store some files in there, but I don't know if your SD install would remain stable. You could always back up your card as a disk image and try it out.
Click to expand...
Click to collapse
I would also like to know the answer for how to make the /boot partition larger on various images to allow sufficient room when booted from eMMC. I tried doing this with EASEUS Partition Master but it will not let me resize the boot partition. Any other options to solve the issue? The only other options is to swap cards when you know you are booting off eMMC and that is a pain.
hikersc said:
I would also like to know the answer for how to make the /boot partition larger on various images to allow sufficient room when booted from eMMC. I tried doing this with EASEUS Partition Master but it will not let me resize the boot partition. Any other options to solve the issue? The only other options is to swap cards when you know you are booting off eMMC and that is a pain.
Click to expand...
Click to collapse
What are you trying to accomplish?
What is your running system?
Why do you want to expand the boot partition?
votinh said:
What are you trying to accomplish?
What is your running system?
Why do you want to expand the boot partition?
Click to expand...
Click to collapse
Sorry, I guess that I could have been more clear in what I am trying to do. I have a rooted nook color 1.1. I burned the image for the dualboot phiremod/Honeycomb that is approximately 3.5 Gb. I burned it to an 8 Gb card and then expanded the 7th (/sdcard) partition to use the space which is available when booted to phiremod. When I boot (with the card installed) to eMMC via J4mm3r's u-boot menu, my rooted 1.1 comes up but sees the /boot partition as the SD card. Since it is the /boot partition, it only has 80 Mb free which is not enough for Titanium Backup, etc. If I could make the /boot partition larger (say 2 Gb) then everything would work as desired.
1. I don't use dual boot option so can't help you
2. I don't use either Phiremod nor Honeycomb so can't help you but
a. I think the NC should still the left-over of the uSD card. if not
b. Try using MiniTool Partition wizard to expand the boot partition and see what happens. Not so sure if it allowed to do so.
hikersc said:
Sorry, I guess that I could have been more clear in what I am trying to do. I have a rooted nook color 1.1. I burned the image for the dualboot phiremod/Honeycomb that is approximately 3.5 Gb. I burned it to an 8 Gb card and then expanded the 7th (/sdcard) partition to use the space which is available when booted to phiremod. When I boot (with the card installed) to eMMC via J4mm3r's u-boot menu, my rooted 1.1 comes up but sees the /boot partition as the SD card. Since it is the /boot partition, it only has 80 Mb free which is not enough for Titanium Backup, etc. If I could make the /boot partition larger (say 2 Gb) then everything would work as desired.
Click to expand...
Click to collapse
Mmm, I think you maybe just need to make up your mind, or deal with the limitations--have your cake or eat it, because you can't do both. That said, I see no reason EASEUS wouldn't let you expand the boot partition, unless there's just no unallocated space, in which case you need to shrink your storage partition first. I don't know whether your card would boot properly with an expanded boot and random files in there, but you should be able to move the partitions around just fine.
Still, your better bet is to decide what's going to be your primary OS and stick with it. You can even dual-boot from eMMC and have two full OSes, but as long as you're using the SD as a boot drive, you're going to be trading off its ability to serve as storage for your interal OS.
Edit: sorry, didn't realize how old the thread was...was trying to find my info with the forum search. ^^;
In the original post the user asked if you could use the microSD for both booting/rooting and for storage -- when I tried this, I got a "SD Card must be formatted" error in my rooted Nook. I let it rty to format the card (then let Windows format it) and -then- I was able to store on the SD card.
But when I rebooted my Nook Color, it got stuck Infinite-looping the Nook Color splash screen. =\
I'm about to root it again, and I'd like to use the same SD card I use to root to have some storage space on it. I (had) a 4GB microSD card, but because the slot is in the worst place it could possibly be on the device...I've already managed to get it wedged inside the casing. =\ The drive still works but I'd rather not have to worry abotu swapping cards in and out and in and out; maybe I have fatter fingers than It hink, but that SD card slot is a pain in my arse.
What did I do wrong my first go 'round? I had a 4GB card, so I used the 4GB CWM image for it. Is it...really simple, and I need to format it into two partitions in windows; set 1GB aside for the CWM boot disc and the other 3GB would be available for file storage?
1. use SD formatter
2. if you used a 4GB CWM image, did you manually update it to the latest build? If not, just grab the 1GB image in the quote at the top of this thread: updated CWM. If you're planning to wipe it right after, it doesn't matter how big it is.
Also, regarding the OP and my response, I later found this link I'd saved about pointing stock to the storage partition of a CM7 SASD card: http://forum.xda-developers.com/showpost.php?p=13668471&postcount=529
I haven't tried it or seen anyone report back after trying it, but there it is if anyone wants to give it a go.