Database Develop

CM7 Nightly Build 39?

Has anyone noticed that there is a new nightly CM7 build available - 39? Its dated today, but I haven't seen anyone talking about it. Has anyone flashed it yet, and if so, what has been changed since stable build was issued?

Official Cyanogenmod7 changelog for Encore/Nook Color
Cm7 Changelog

Gin1212 said:
Official Cyanogenmod7 changelog for Encore/Nook Color
Cm7 Changelog
Click to expand...
Click to collapse
Thanks, but I went there, and nothing came up, just a blank black screen.
I was really just trying to see if anyone had actually tried it yet. I didn't see anything in the developers thread either.

You'll want to use something other than IE to view the changelog site (and the internet in general). Chrome works fine.
CM7 has a pretty wide audience so more often than not the dailies are not going to do much for the NookColor specifically. Most the time if there's a NC specific feature bump there will be a bunch of new threads pretty quickly.
---
Issue 3418: Show statusbar on ADW swype and fix velocity (android_frameworks_base)RTL bug fixes: (android_frameworks_base)Traditional Chinese: Translate "(un)registration failure" (android_packages_apps_CMUpdateNotify)add offmode charging for htc (android_bootable_recovery)harmony: CHANGELOG - add pershoot as a maintainer for harmony (android_vendor_cyanogen)

fwiw, I'm running 39 right now + Dalingrin 4/13a OC kernel and things seem fine so far.

jahfry said:
fwiw, I'm running 39 right now + Dalingrin 4/13a OC kernel and things seem fine so far.
Click to expand...
Click to collapse
yeah same here, if you upgrade from stable you might need to reinstall gapps, i know i did.

now you can do screenshots

if you install without doing any wipes then it retains your gapps and settings
WobbleTheHutt said:
yeah same here, if you upgrade from stable you might need to reinstall gapps, i know i did.
Click to expand...
Click to collapse

animatechnica said:
now you can do screenshots
Click to expand...
Click to collapse
I like what I'm hearing - how would one go about said "Screenshotting?"

--->>>>CM7 Nightly's Build's Discussion & Thoughts<<<---

Please use this thread for all your discussion about the Nightly builds for CM7 for the Atrix.​It is important to note that Nightly Builds are not for most Users
Things to know about Nightly Builds:
Not Stable releases
Will have bugs / issues
Not intended to be used as main everyday ROM
Are not Fully Supported like Stable Releases
Should not be used by people that are not Masters of ADB
You Should be comfortable enough to recover from soft bricks On your OWN
90% chance you will be wipping your data (factory reset) at some point and time
​DO NOT REPORT ISSUES ON NIGHTLIES ON THE BUG TRACKER​FAQ FOR ATRIX NIGHTLY's​Nightly builds can be found here:
http://download.cyanogenmod.com/?device=olympus​​

Also would like to add that BACKUPS are your friend if you are not comfortable with t0dbld's sugestions. Thanks for starting this thread and for the teams dedication.
Is or are the Dev team also creating different tweaks/builds seperate from Cyanogenmod or will the teams work just be incorporated into the nightly builds?

Excellent! Allrighty, lets kick off this party with a bang. First off, thanks to all the Devs and others who made this a reality. Nightly builds = awesome. After installing this with the latest version of Gapps, everything is working beautifully. Very excited to see where this is going. Faux123's stopgap kernels WILL work with this build so far and I have tested them. Only thing I've noticed so far is that, for the first time for some reason, I am unable to buy an app from Market and bill it to my AT&T account. Option seems to have disappeared. I've heard of others discuss this, and I'm assuming that the change language to English fix will work with this, but haven't tried it yet. Umm...ring lock screen seems to be working with less lag than before. Other than that, have nothing else to report at this time. Thanks again all, and happy flashing!

Phalanx7621 said:
Excellent! Allrighty, lets kick off this party with a bang. First off, thanks to all the Devs and others who made this a reality. Nightly builds = awesome. After installing this with the latest version of Gapps, everything is working beautifully. Very excited to see where this is going. Faux123's stopgap kernels WILL work with this build so far and I have tested them. Only thing I've noticed so far is that, for the first time for some reason, I am unable to buy an app from Market and bill it to my AT&T account. Option seems to have disappeared. I've heard of others discuss this, and I'm assuming that the change language to English fix will work with this, but haven't tried it yet. Umm...ring lock screen seems to be working with less lag than before. Other than that, have nothing else to report at this time. Thanks again all, and happy flashing!
Click to expand...
Click to collapse
Hi, May i know this rom can support the Fingerprint and the webtop?
what the different with another CM7 (non nightly ver) , quite blur here.
thanks.

You might find it being offered by someone willing to make a workaround to get it to work. Being that "Android" didn't put the fingerprint scanner in the phone and no other phone has one, you'll have to wait for someone to actually make a script that can be added to CM7.

NP...
Does Cyanogenmod or Dev Team post changelogs about each update/nightly?

Phoneguy589 said:
NP...
Does Cyanogenmod or Dev Team post changelogs about each update/nightly?
Click to expand...
Click to collapse
https://cm-nightlies.appspot.com/?device=olympus

Are we going to see nightlies on Rom manager?
-CM7.1 -B^-N Over Clocked via Faux123 1.45ghz V2.1 THANKS XDA DEV!

I'm already seeing the Nightlies on ROM Manager. In fact, just downloaded Nightly 3 and I'm installing as we speak.

I'm seeing things about "FM Radio" on the nightly change log. Does the atrix have FM Radio capabilities?

CancerJesus said:
I'm seeing things about "FM Radio" on the nightly change log. Does the atrix have FM Radio capabilities?
Click to expand...
Click to collapse
No it does not have capability

I've been running full #2 today, full wipe. Only problem I've had is battery life. I could get 24+ hours with the previous betas...I'll be lucky to get 10 at this rate. Nothing in the stats stands out. Guess I'll wipe and install #3 tonight and see how it goes.

Anyone getting Market FC all the time as soon as they try to download an application? Should I reboot my phone and see if that fixes the problem?

crea78 said:
Anyone getting Market FC all the time as soon as they try to download an application? Should I reboot my phone and see if that fixes the problem?
Click to expand...
Click to collapse
Change Language to "English"
Usually the fix...

crea78 said:
Anyone getting Market FC all the time as soon as they try to download an application? Should I reboot my phone and see if that fixes the problem?
Click to expand...
Click to collapse
I got that when I updated to the stopgap version. Just use Titanium Backup to backup your market apk and then uninstall it. Restore it and use the "App Only" option and do not restore data. After its done simply open Market and add your account.
You're good to go after that.

I wasn't sure if I'd run into any challenges with the latest nightly, but nope! Running smooth as butter. Using faux's latest 1.45ghz OC kernel too. Didn't wipe from scratch, just cleared Dalvik cache and hoped for the best lol (and did a backup of course)

I'm running nightly #2 should upgrade to #3?
sent from cm7 atrix 1.3ghz

michaelatrix said:
I'm running nightly #2 should upgrade to #3?
sent from cm7 atrix 1.3ghz
Click to expand...
Click to collapse
Not worth it

XAviierG said:
Dudes he didn't ask if the finger print scanner works he just said he didn't STOP FLAMING
Click to expand...
Click to collapse
sublimejosh2000 said:
I hope this thread doesn't turn into what the other one did,who gives a rats @$$ about the stupid Finger Print Sensor? When it is working, it will be added, not anytime sooner. I threw up in my mouth when I saw that post ...
Click to expand...
Click to collapse
Not looking to start a war here but lets do some Math:
XAviierG= March 2011 join date ; # of posts 2624 or aprox 403.69 a Month
sublimejosh2000 = Dec 2010 join Date : # of posts 351 or aprox 35.1 a month
I think its safe to say that at least one user is not spending his life "flaming" others or making a lot of pointless posts, etc. Lets watch who plays police in these forums because as you can see not so many are doing it right them selves

I'm running #3 and its smooth as butter, thanks for the hard work y'all put into the atrix! Y'all rock
Sent from my MB860 using xda premium

[ROM][KANG]CM9 ICS 10.1 WiFi Preview 03/04/12

Hello everyone,
as the old KANG build that got posted here is very old I've decided to compile my own builds.
As many people demanded a newer build you can use mine.
Flashing this may brick your device and there is no support from either Cyanogen and his crew or me. You do this on your own responsibility.
This build is not final - it's more an alpha build. If you decide to use it you shouldn't care about bugs.
I'll keep posting updates every day (if there is any reason for it). There will be no guaranteed support and I won't add user-specific features for anyone.
This is not my work - it's mostly from Pershoot & Cyanogen. This build uses Pershoot's GitHub as base for the device.
If you like the builds you're welcome to donate for some Club Mate / Beer and new hardware.
Works:
WiFi works
No more SOD or display flickering
Buttery smooth
HQ Videoplayback
USB Transfer - use the MTP mode and stop complaining about ICS
Doesn't work:
Camera doesn't work
I will not provide detailed Changelogs. Read CM9 Gerrit ICS & P4Wifi for that.
You can find the official app in the Android Market for 1 €:
https://market.android.com/details?id=de.messerschmidt.tabkang
It supports direct reboot (normal and into the recovery) and downloading the newest rom (incl. version-check) from my private FTP.
GAPPS (4.0.4):
http://dev-host.org/8Re
Voice Search Fix:
http://forum.xda-developers.com/showpost.php?p=21745603&postcount=1
Builds:
03/04/12
http://dev-host.org/kfz MD5: 7ef460037f4dd4378cfefb43258e315a
02/29/12
http://dev-host.org/fDR MD5: b759b43b1a5ac670f8ac316f1e9b43c7
02/12/12
http://dev-host.org/NKf MD5: 57da37ec78f3e02eeef0e7cd7672c396
02/08/12
http://dev-host.org/JLT MD5: 78e78cbb31664645627245276d6f02d3
02/03/12
http://dev-host.org/a7m
Installation:
Flash CWM if you've got none (I'm using the Overcome one)
Backup your current build
Wipe data
Flash my build
Flash the Gapps
Reboot (may take a few minutes)
Enjoy
USB MTP:
As some people requested me to do a little How-to for enabling MTP-mode:
Go into the settings
Choose storage
Tap the 3 dots in the upper right (menu)
Choose "USB computer connection"
Check "Media device (MTP)"
Done
Notice:
This is a pure Android rom and no Samsung rom. There won't be any unneeded additions like TouchWiz, My Files, or whatever.
Look in the Market for other/better apps if you're seriously missing something. I won't any additions/apps/whatever to this rom except I want to use it myself (not gonna happen).
Videos (made by qbking77):
How to Install:
http://www.youtube.com/watch?v=qcvfmnJdxdQ
Review:
http://www.youtube.com/watch?v=7m54DQ0Sqm8

downloading this right now, thank you

Any noticeable differences?

Ghost114 said:
Any noticeable differences?
Click to expand...
Click to collapse
Just bug fixes, I think. I'm downloading now, so I'll report back later.

Installed and booted fine. Testing now, report back later.

new boot animation?
Sent from my SGH-I997 using Tapatalk

why didnt he mention the difference between this build and the other one ? oh well thx anyway.

theROMinator said:
new boot animation?
Sent from my SGH-I997 using Tapatalk
Click to expand...
Click to collapse
No, but is that the first thing you think of when a new CM9 build is posted? Well, we are all diffrent

tarekkkkk said:
why didnt he mention the difference between this build and the other one ? oh well thx anyway.
Click to expand...
Click to collapse
Because I don't know when he built his build?
The display isn't flickering anymore and I didn't get any SODs anymore.

How suitable for everyday use is this build, beside of the above mentioned issues?

Gonna go ahead and subscribe to this and see what issues there are.
Not sure how much longer I can hold out for official CM9/ICS.

Murmel2k said:
How suitable for everyday use is this build, beside of the above mentioned issues?
Click to expand...
Click to collapse
Now that the flickering is fixed and SOD, I'd say it's well suited for daily use.
P.S. It also seems to be alot smoother, and you now get Terbuchet settings. Only thing missing for me is the camera.

is it safe to overinstall over DaAwesome1's ICS Kang, or must I wipe?

Does anyone know please, whether the cm9 kernal supports undervolting?

got556 said:
Gonna go ahead and subscribe to this and see what issues there are.
Not sure how much longer I can hold out for official CM9/ICS.
Click to expand...
Click to collapse
Ditto: well, I think I'll only hold out log enough to get my tablet charged.

danielsf said:
Does anyone know please, whether the cm9 kernal supports undervolting?
Click to expand...
Click to collapse
I was able to install setcpu and set the clock speed with the first ICS Kang

Beakerzor said:
is it safe to overinstall over DaAwesome1's ICS Kang, or must I wipe?
Click to expand...
Click to collapse
Basically a wipe shouldnt be needed. Test share your experience.

Does Netflix work? I'm this close to jumping on this.

This is just a whole new CM9 from the build posted earlier. The old build worked very smooth, as long as you didnt fill it with lots of user apps and widgets then it became very laggy. I have now restored all my apps 250+ and its still silky smooth, i have widgets with sync on several windows and app shortcuts and it still behaves as if it where just installed (empty). this sure gives hope for our tab. Go CM Team and thanks to OP for posting this build.

This build is an improvement over the prior kang, seems the CM team has been busy over the holidays. Smoother UI, screen flickers are gone, definite daily driver material. Will report back if I run into any problems.

[Updated 23/07/13]Android 4.1.2 and MIUI V5 3.7.19 for X6

this ROM is ported from HUAWEI Honour U8860
thx kuiben , thx for his tutorial guide me start my porting.
not working:
hdmi
camera recording
ok, this is the final shendu verison of 4.1.2, if no big bugs, there will be no more updates.
shendu team is now taking more focus on the version update.
if no service in the first boot, then reboot again.
bugs:
slight screen blurred,but ok for using.
23/07/13 update log
update base rom with Honour U8860[190713]
foucs on battery life and memory use
fix 1 bug cause heat, battery runs fast
14/07/13 update log
update base rom with Honour U8860[050713]
download speed in the statusbar
guest mode, (no need to worry about other will use your phone to seek information u dont want to share.) setting - security setting just open it.!
new interface for setting, phone, message ,lock screen. and other new design
default launcher with samsung galaxy s4 and accuweather widget
kernel update.
01-07/13 update log
(just a slight change, study week. rush for assignments and web project)
Update new kernel CK0.5. thx cacingkalung
Fix bluetooth cannot be closed
Delete chinese characters in Calendar. Add input method.
Change default lauguage and location- English/US
Change bold fonts. more clear.
Reduce the ROM size..
better performance in memory. 170+ free. 10 more than before.
07-06-13 update log
repair display problem
repair the switch of torch
better performance
Instructions to Flash the Rom.
->Reboot to CWM
-> Format system/data/cache
-> flash shendu23-07-2013.zip
-> Reboot
notice: MTP and PTP mode can not use in X6, connect the computer and just click to open the USB device
download:
1. shendu23-07-2013.zip http://d-h.st/MC8
------------------------------------------------------------------------------------------------------- am a parting line ---------------------------------------------------------------------------------------------------------
Update 1 MIUI V5 rom, version: the lastest version 3.7.19
ported from HD2
since V5 require more ram to run . 100+M still can use. can not expect very smooth,
download speed in the status bar.
select chinese also wont fc
Bernchmark 4200+
All credits to
reversegear
rcset for his tutorial
gtbluesky for his lastest version
download:
2. MIUI V5 3.7.19 http://d-h.st/8ka

awesome work mr. @lanhoter
downloading it now
got bored off with the existing JB roms time for the new one
what is the base rom u have used for porting
from screenshot it looks like network signal bug showing only two bars can you confirm that.
thank you for the new rom

reversegear said:
awesome work mr. @lanhoter
downloading it now
got bored off with the existing JB roms time for the new one
what is the base rom u have used for porting
from screenshot it looks like network signal bug showing only two bars can you confirm that.
thank you for the new rom
Click to expand...
Click to collapse
just for the malaysia poor network... never mind, the signal is no problem

ROM is cool. new experience in JB( I'm on JB from past 6months)
Every thing works like normal JB rom
ROM is smooth just like JB
wifi works.
camera works
i like new superuser app
using touch wizz provided in op
believe me head set icon works and even headset button works
Bluetooth not working. tried the zip given in first post but still not working. please fix this issue
thanks for the new rom.
Sent from my HUAWEI U9000 using Tapatalk 4 Beta

It is MIUI ROM?

ryo2456 said:
It is MIUI ROM?
Click to expand...
Click to collapse
No, this is not miui, base - 10 cm, fast and perfomans ROM

ryo2456 said:
It is MIUI ROM?
Click to expand...
Click to collapse
this is shendu rom a chinese rom.

oh, just feel it look like MIUI
Is that stable?

ryo2456 said:
oh, just feel it look like MIUI
Is that stable?
Click to expand...
Click to collapse
stable

ryo2456 said:
It is MIUI ROM?
Click to expand...
Click to collapse
no , just a cm10 rom ported from huawei honour U8860,

lanhoter said:
no , just a cm10 rom ported from huawei honour U8860,
Click to expand...
Click to collapse
great ROM, :good: experiencing smooth ROM, just searching how to translate tiny chinese character in lockscreen part and notification drawer, and make the video recorder works, but its not too disturb the performance. salute for lanhoter... :victory:

bluetooth works
finally bluetooth problem sorted out now it works like charm.
the problem was with the file permission. i messed up with it
2nd day with this rom still im feeling the smoothness of the rom
it is sad that presently themes are not supported.
battery life is not bad.

IMHO, this should be move to Android Development Thread would be appropriate. By the way, how's gaming performance on this rom?

games are playable if you dont install apps like facebook ,chrome,
else it will lag
JB roms are not for games as i experienced. this may be because of low ram of our device

the battery drain is good, so far it is stable.
but i like the original UI XD

I can't seem to get the ROM to work very well and am not novice as to flashing ROM. After flashing, the rom boots up to the home screen and stays for like 5-10sec and then reboots all by itself, the cycle continues just like that. Wierd though as no body is getting the same prob.

reversegear said:
finally bluetooth problem sorted out now it works like charm.
the problem was with the file permission. i messed up with it
2nd day with this rom still im feeling the smoothness of the rom
it is sad that presently themes are not supported.
battery life is not bad.
Click to expand...
Click to collapse
same here， quite confused with how to break the lock of the theme, since the theme is not bad, maybe wont work on this..
already got U8860 dev version
1.fixed video recording
2.fixed not stable
3.recompilation by gcc to fix lag，better performance
4. add original lock theme
5. add net speed on the status bar
6. upgrade the kernel and better performance in camera and video recording。
but just dev version not stable， will try later with stable version， hopefully all the new features ported to X6

It's really nice ROM..... Although it's 4.1.2, it's very light on mobile...
I hope mod will move it to developer section very soon...
Sent from my HUAWEI U9000 using xda app-developers app

I can't seem to get the ROM to work very well and am not a novice as to flashing ROMs. After flashing, the rom boots up to the home screen and stays for like 5-10sec and then reboots all by itself, the cycle continues just like that. Wierd though as no body is getting the same prob.
I've tried formatting and reflashing over n over again. Still d same.

wesleyel said:
I can't seem to get the ROM to work very well and am not a novice as to flashing ROMs. After flashing, the rom boots up to the home screen and stays for like 5-10sec and then reboots all by itself, the cycle continues just like that. Wierd though as no body is getting the same prob.
I've tried formatting and reflashing over n over again. Still d same.
Click to expand...
Click to collapse
are wiping data? Catche ? and delvic catche? ... if not please do the same, unless re-download file follow the process...
it works perfectly with me...

Pac-Rom Kitkat for i9300(12-Oct-16)

This is a compile done for a friend, as he found lp/mm roms to be unbearably laggy,especially when using social media/chatting apps. Just thought it could help some folks hoping to run an updated kitkat in their old(but great) galaxy s3. After some usage, his words were: this phone is part of my hand again .
This is a straight compile from cm11 sources for i9300, with the pac-rom source code(the best kitkat custom rom imo). Battery life, performance and stability are truly superb. Sources merged on 12-Oct-16, therefore having the latest stagefright and other security patches built-in. Wifi-fix for i9300 is also integrated. The rom is working fine with the latest boeffla-kernel(2.14) released for cm11, and thats the tested and recommended configuration. Some useless apps removed(like voicedialer, whisperpush,moviestudio,pacconsole and some more i can not remember) and i also removed pac console from the rom configuration settings framework as well. Have fun using it.
Link: https://mega.nz/#!Vl4nnYrK!N1PYfctzAnkOVDucMVsSCT5nnxUqY_oAZe2tsGDXkAo
All credits go to cyanogenmod and pac-rom team for both their amazing roms and sources for i9300 and many other phones we use and love!

Thanks you,!!
Screenshots?
Enviado desde mi SM-G935F mediante Tapatalk

Not having the phone means no screeshots . You can try it and put some up for everyone to see. You wont be disappointed.

What about gapps?? We have to dwnload it?

This is a clean rom, no gapps,xposed, or other mods included. use opengapps.

Really appreciate your efforts here... Great work on this rom... everything working fine... If possible can you put some time looking into Archidroid 4.4.4... IMO it was the best rom our s3 could ever have.... It has some wakeblock issues that might get resolved if we update the sources. Again thanks for your effort. S3 community owes you!

Hi uninstall theme auto reboot! Please to fix

sak0071 said:
Hi uninstall theme auto reboot! Please to fix
Click to expand...
Click to collapse
This problem persist with the latest snapshot of cm 11 also... nly install themes that you like... doesnt affect the functionality of the rom having themes installed.

Thanks for this great ROM. The only issue I have is I cant get 3G to work. Any suggestions? Would be much appreciated...

Its probably an APN problem, try inputting your carrier settings manually. 3g works fine on my friends' phone.

The rom is incredible but I need to restart my system with Wifi turned on so it can connect. If it disconnects (for any reason, disabling wifi, getting out of range etc), it only flashes "Connecting..." when connecting to the router again, but it doesn't connect

Try the fix in this thread: http://forum.xda-developers.com/galaxy-s3/help/wifi-fix-cm11-i9300-t2910872 . I already included the needed file in the rom, and it works fine here, but it couldnt hurt to try. Could it also be your router causing this?

pchatzop said:
Try the fix in this thread: http://forum.xda-developers.com/galaxy-s3/help/wifi-fix-cm11-i9300-t2910872 . I already included the needed file in the rom, and it works fine here, but it couldnt hurt to try. Could it also be your router causing this?
Click to expand...
Click to collapse
Will try! And it isn't the router, it worked with cm12.1 (no issues whatsoever) and cm13 (the issue on cm13 was random disconnects but it was rom related too).

Hey!
Switched to this rom recently and being very impressed, it having all the features one could ever want yet stable and battery friendly. Definitely better than MM roms on S3.
However do we need an kitkat bootloader or do we even have one available? Still on the official 4.3 bootloader and just wondering if could get more stability if upgrading it to kitkat.

Kitkat bootloaders dont exist for the i9300, since it never officially got kitkat. Last semi-stock kitkat rom for the i9300 were ported roms from n7100 and the korean variant of gs3, and they did not include a bootloader, because it would hard-brick the phone. Having installed 4.3 before this was the best you could do. Having this rom installed in 2 phones(my friend's and my sister's) i definitely recommend installing boeffla's last cm11 kernel, no stability,battery, or features problems with it. Actually, apart from the rebooting on uninstalling themes bug, no other bug has been reported to me from them, no even ones in the thread.

sak0071 said:
Hi uninstall theme auto reboot! Please to fix
Click to expand...
Click to collapse
Hold power, power menu come up, hold reboot, enter safemode, uninstall theme from app menu...that should work
Sent from my GT-I9300 using XDA-Developers mobile app

Hi. This rom next update? thank

jabyftw said:
The rom is incredible but I need to restart my system with Wifi turned on so it can connect. If it disconnects (for any reason, disabling wifi, getting out of range etc), it only flashes "Connecting..." when connecting to the router again, but it doesn't connect
Click to expand...
Click to collapse
I have the same problem. Is there a solution ?

wifi doesn't work ! any solution?

medsalah said:
wifi doesn't work ! any solution?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2910872
Sent from my GT-I9300 using XDA-Developers Legacy app