I'm trying to get to the bottom of this problem: it started ever since I flashed Cognition 3.02 and Firebird 2 kernel last week. That was my first endeavor into custom roms. This week I'm on Cog 3.04 and Speedmod kernel. I'm in the US on ATT in a big city with good signal strength.
It's the strangest thing: I can hear calls perfectly fine, but the other people that I'm talking to complain of static and background noise, and basically can hardly hear a word I'm saying.
Anyone know what in particular causes this type of situation? I really don't want to go back to stock rom, but I may have too because, well, I do need my phone to... you know, make phone calls.
What modem are you using? You are using an i9000 base kernel you want to make sure you are using an i9000 modem. I would suggest jk4
http://forum.xda-developers.com/showthread.php?t=835272
Look in the modem thread under development. I am using the UGJL2 Modem. Having great success with it.
Sent from my SGH-I897 using XDA App
I'm using the UXJL1 modem. Is this somehow bad/incompatible?
At this point, I'm not looking for any frills or speed, I just need something that's going to be rock-solid dependable. People complain about call quality all the time when I talk to them. It's weird, because everything sounds perfectly fine on my end.
Also, sorry for the dumb question, but I didn't see in the modem thread on how you actually install a new modem? Do I just flash it like a rom/kernel, etc.? Can I use Clockwork for this?
Flash through clockwork. Dl to phone move to sd. In clockwork select install zip from sd, find modem, select.
Jk4 is used by most i9000 roms. I would start there.
Jl1 is a rogers captivate kernel best performance with i9000 kernel will be a i9000 modem
If you are using the firebird kernel you can use a captivate modem for best call quality at the cost of losing hsupa.
Just about to flash Darky's ROM 9.3. Planning on flashing the i897 500 mhz speedmod kernel afterwards, plus of course an i897 compatible modem to match the kernel.
First, is it necessary to do a full wipe if I'm currently on a stock rooted i897 with eclair (2.1)? And must I really pull the sim, sd, and battery? If so , why?
Second, should I flash Darky's captivate fix before the rom or not?
I get conflicting reports when I search the forums.
Finally, what modem(s) would you suggest? I'm in PA (Harrisburg area) on ATT so I need the 850 Band. Suggestions? I'm assuming based on my research here I'll need an i897 modem to match the i897 version of the kernel (assuming it's really necessary to flash the i897 Speedmod instead of using the one Darky's comes with(???))
P.S. Safe to do all this with CW from recovery menu? or must I really install/use Odin? (more work, sigh)
Thanks in advance.
First, is it necessary to do a full wipe if I'm currently on a stock rooted i897 with eclair (2.1)? -Yep, it's not hard. I have 2 bugs than I not to do it. Not work Home button, and my cappy play music throw the speaker than I plug earthphone and the opposite .
And must I really pull the sim, sd, and battery? If so , why? - No. I Flash 5 times and nothing bad happens. And my phone plug into the PC via USB than I flash.
Second, should I flash Darky's captivate fix before the rom or not?
I get conflicting reports when I search the forums. - I don't know. I do not apply any fix, all works perfect.
Finally, what modem(s) would you suggest? I'm in PA (Harrisburg area) on ATT so I need the 850 Band. Suggestions? I'm assuming based on my research here I'll need an i897 modem to match the i897 version of the kernel (assuming it's really necessary to flash the i897 Speedmod instead of using the one Darky's comes with(???)) -Dont now I'm from Russia.
P.S. Safe to do all this with CW from recovery menu? or must I really install/use Odin? (more work, sigh) - I instal from Odin because before I flash CM7 (on CM7 very bad video works) Use Odin very good program. Not difficult. But if power off yve got a problem.
Hi, the Gingerbread fever has started and everyone's bragging about it. I am on a i9000m and as some of you may have discovered this model is kind of cranky and does not flash everything like the i9000.
So could someone tell me if they have flashed their i9000m with a JVK successfully?
And if yes, have you tried reverting to stock?
Thanks!
And if you say yes...what steps did you follow to get to GB?
to get to froyo I meant...
I dont see a problem here, I have a i9000m and mine is not cranky. If my partitions get messed or something gowes wrong I usually just flash EZBASE on mine following his instructions, then I flash the JL2 found on Samfirmware without repartition checked to get back to original state.
http://forum.xda-developers.com/showthread.php?t=991792
I tried JVK but I seem to have lost the WCDMA 850 or WCDMA 1900 which ever one is GSM. I used odin and UGjl2 and put it in PDA and reflashed back to Froyo until I can get just the jl2 modem or the BMC CSC files. Don't know exactly which one I need to reenable the GSM.
Gingebread is awesome and for some reason the tv screen off animation is a must have.
I just flashed to JVK today using the firmware from samfirmware (european version) and it works fine, no issues here. Bell Galaxy S Vibrant.
Thanks Guys...So, when I flash GB with its bootloaders and then when I try to flash back to Froyo (Usually do it with JPC and then JL2) the bootloaders shouldn't be a problem???
Mauro87 said:
I just flashed to JVK today using the firmware from samfirmware (european version) and it works fine, no issues here. Bell Galaxy S Vibrant.
Click to expand...
Click to collapse
I forgot exactly what the menus say but,
can you go to "wireless and network" then mobile networks. Then there is a a place for settings that let's you pick gsm/wcdma or GSM or Wcdma.
Select GSM only and see if your phone goes to No Service.
Thanks
Yeah it goes to no service in GSM only mode, no calls or data.
Videonut said:
I tried JVK but I seem to have lost the WCDMA 850 or WCDMA 1900 which ever one is GSM. I used odin and UGjl2 and put it in PDA and reflashed back to Froyo until I can get just the jl2 modem or the BMC CSC files. Don't know exactly which one I need to reenable the GSM.
Gingebread is awesome and for some reason the tv screen off animation is a must have.
Click to expand...
Click to collapse
Try this;
http://forum.xda-developers.com/showthread.php?t=787472
droilfade said:
Thanks Guys...So, when I flash GB with its bootloaders and then when I try to flash back to Froyo (Usually do it with JPC and then JL2) the bootloaders shouldn't be a problem???
Click to expand...
Click to collapse
I would be nervous about changing the boot loader from UGJL2. This is where the I9000M internal SD corruption fixes were done from the reading I have done.
jim5055 said:
I would be nervous about changing the boot loader from UGJL2. This is where the I9000M internal SD corruption fixes were done from the reading I have done.
Click to expand...
Click to collapse
Then how do you install GB. I don't think installing without bootloaders is good too!!! I was thinking if I flash to GB and to get back to froyo if I use a three file ROM like JPC.... I will be fine, no?
Mauro87 said:
I just flashed to JVK today using the firmware from samfirmware (european version) and it works fine, no issues here. Bell Galaxy S Vibrant.
Click to expand...
Click to collapse
Have you tried reverting to stock froyo???
I reverted to stock Froyo then used odin and only installed the PDA file.
CF-Root and JVK screenoff/batt.
Looks like I have both wcdma 850 and wcdma 1900 now.
Videonut said:
I reverted to stock Froyo then used odin and only installed the PDA file.
CF-Root and JVK screenoff/batt.
Looks like I have both wcdma 850 and wcdma 1900 now.
Click to expand...
Click to collapse
So you are using jvk with the jl2 modem? Any incompatibility issues you've noticed so far? Thanks!
Sent from my GT-I9000M using XDA App
JJustin said:
So you are using jvk with the jl2 modem? Any incompatibility issues you've noticed so far? Thanks!
Click to expand...
Click to collapse
That's correct. So far no problems. The only strange thing was after the flash when rebooting it stopped at the recovery screen showing an error finding CSC information, can't remember exactly. I just selected reboot and all was good. I now have a KOR product code. If I was to flash again I think i'd flash the CSC file too.
I'd like to know if anyone has flashed all 3 files and has both wcdma 850/1900 working.
I flashed JVK the other day and so far so good. I first tried to install JVK without bootloaders but the phone would not boot after, just hung at the first Samsung screen. I flashed the bootloaders version (hesitantly since I am now on my 3rd phone), and it worked fine. Obviously I lost my 850mhz band, but got it back after flashing the JL2 modem. Knock on wood, but things are working great. I have since flashed a couple different kernel's. Used Clockwork Mod to get the CRT TV Off hack working.
I occassionaly run into a force close, but I found the same on the different versions of Froyo I have been running.
In case you are wondering. I flashed using Odin, no additional checkboxes were checked (no pit, no partition, no bootloader). After flashing I grabbed the kernel of choice and flashed it with same Odin settings. I did get error's moving from Speedmod to Ultimate Kernel. I ended up having to reflash the Ginger ROM to fix, then proceeded to install the Ultimate Kernel.
With respect to the bootloader issue for Bell devices. I do have concerns about flashing the new bootloaders, but am hoping that the steps taken to correct the Froyo JK4 debacle have been included in the new bootloader. Otherwise I may be in for another headache in a few weeks. I havent personally tried it, but going back to JL2 shouldnt be a problem. Might just have to check off the bootloader option in Odin to get back on the Bell JL2 bootloader, but not too sure.
Good luck.
Dawgplg said:
I flashed JVK the other day and so far so good. I first tried to install JVK without bootloaders but the phone would not boot after, just hung at the first Samsung screen. I flashed the bootloaders version (hesitantly since I am now on my 3rd phone), and it worked fine. Obviously I lost my 850mhz band, but got it back after flashing the JL2 modem. Knock on wood, but things are working great. I have since flashed a couple different kernel's. Used Clockwork Mod to get the CRT TV Off hack working.
I occassionaly run into a force close, but I found the same on the different versions of Froyo I have been running.
In case you are wondering. I flashed using Odin, no additional checkboxes were checked (no pit, no partition, no bootloader). After flashing I grabbed the kernel of choice and flashed it with same Odin settings. I did get error's moving from Speedmod to Ultimate Kernel. I ended up having to reflash the Ginger ROM to fix, then proceeded to install the Ultimate Kernel.
With respect to the bootloader issue for Bell devices. I do have concerns about flashing the new bootloaders, but am hoping that the steps taken to correct the Froyo JK4 debacle have been included in the new bootloader. Otherwise I may be in for another headache in a few weeks. I havent personally tried it, but going back to JL2 shouldnt be a problem. Might just have to check off the bootloader option in Odin to get back on the Bell JL2 bootloader, but not too sure.
Good luck.
Click to expand...
Click to collapse
Maybe you could try what is stated in this thread:
http://forum.xda-developers.com/showthread.php?t=997950
basicaly, you flash those modem:
Jl2 => JPD => (JQ1 was the ending there, but you should try to flash the modem from JVK)
By "tick off" you mean check it or no? Lol...
If you mean check it... I don't think its a good option. Rather why not just flash a three file ROM to get back!!
I'm running cm7 now and haven't tried going back to stock. I will give it a shot soon. The ROM is awesome but its the batt that bothers me!
Not sure if you were referring to my post but I did not tick off or check off any additional boxes when using odin. only the default boxes had a check. Repartition and Bootloaders were un-checked and I did not have to use a pit file.
In addition my modem gets 850mhz just by flashing back the JL2 modem file through Odin.
Btw, Darky RC3 ROM installed as expected. and by default ran the voodoo lagfix.
Phone is smoking fast....
Ok so here's the deal.
I flashed JVK 2.3 (Darky's Rom v10 rc6 DarkyCore Kernel 2.2) and so the baseband is JVK i'm assuming
I'm having issues regarding the 850 band.
Q: what's the best modem for Bell users ?
Q: am I able to JUST flash a modem ? if so, how ? (through ODIN or CWM?)
Q: Do I just put the modem file into the modem thing in odin and hit flash? can I flash a Froyo 2.2 (JL2) modem onto my Gingerbread (2.3) ROM ? If not, what's the best Modem to use ?
I'm also having issues regarding downloading MP3's -- they all fail like those mp3 finder apps. But I can preview. WTF?
also my GPS isn't working - does a modem fix this ?
Funkadelick said:
Ok so here's the deal.
I flashed JVK 2.3 (Darky's Rom v10 rc6 DarkyCore Kernel 2.2) and so the baseband is JVK i'm assuming
I'm having issues regarding the 850 band.
Q: what's the best modem for Bell users ?
Click to expand...
Click to collapse
I am running KC1 - I have tried JL2, JL2 with JM9 GPS fix, JK4 but KC1 is the best to date and gives me best GPS performance to date. If you use non "native Bell" modem ie new Gingerbread modems there are steps to take to ensure 850MHz still works. You will need to review this forum I think. I have not tried such modems to date. You can use Froyo or GingerBread modems - no issue.
Funkadelick said:
Q: am I able to JUST flash a modem ? if so, how ? (through ODIN or CWM?)
Click to expand...
Click to collapse
Yes, CWM is best. I have many modems in the SDCARD root, quick and easy to change.
Funkadelick said:
Q: Do I just put the modem file into the modem thing in odin and hit flash? can I flash a Froyo 2.2 (JL2) modem onto my Gingerbread (2.3) ROM ? If not, what's the best Modem to use ?
Click to expand...
Click to collapse
Use CWM - get the modem files from Perka's File stash - look for the 850MHz section
Funkadelick said:
I'm also having issues regarding downloading MP3's -- they all fail like those mp3 finder apps. But I can preview. WTF?
Click to expand...
Click to collapse
Sorry, not downloading MP3 at present time (I have heaps already)
Funkadelick said:
also my GPS isn't working - does a modem fix this ?
Click to expand...
Click to collapse
Se above. But you should search this forum under GPS. If GPS has never worked you may have to do some hardware work. ie the contact from the PCB to the GPS antenna is pretty crappy and you may have to disassemble the SGS, stretch the contact spring a bit then re-assemble.
Funkadelick said:
Ok so here's the deal.
Q: Do I just put the modem file into the modem thing in odin and hit flash? can I flash a Froyo 2.2 (JL2) modem onto my Gingerbread (2.3) ROM ? If not, what's the best Modem to use ?
Click to expand...
Click to collapse
If using Odin(Definitely easier to use CWM as Jim said) you put the file(make sure it is for odin and not CWM) into the "Phone" section. And if on Gingerbread you're probably using CWM3 so if flashing it via CWM make sure it's a CWM3 version of the modem zip
I'm a dev and I've spent 2 hours reading and trying...
Can I flash KC1 or KG3 from ClockworkMod 4 or 5 ? I'm on Linux and I avoid ODIN if at all possible.
I flash back and forth between CM7 nightlies and various MIUI ROMs. I need my SIM to work for s/w testing, for data and voice.
This i9000m phone is pretty new, was a Virgin Mobile model (pretty much Bell) and I use a SIM from an MVNO of Bell. (President's Choice.) With the stock ROM this worked without unlocking.
I tried some ZIP files for these basebands, meant for CWM3. I also tried replacing the modem.bin in the latest CM7 nightly. Nothing I do makes Settings -> About show a baseband other than "I9000XXJVK".
When I do a search for networks, it eventually shows me: 302610, 30220 and "CAN Rogers Wireless Inc." and I have emergency service I believe.
At the dial keypad I can't make "*#1234#" or "*#0011#" do anything.
Thanks !
No thoughts ?
I managed to get KC1 and KG3 loaded fine when installed along with Darky ROM using heimdall.
But when I install CM nightly, it overwrites the modem.bin.
And when I then use heimdall to flash the KC1 or KG3, CM says "Baseband version Unknown".
Same when I flash a modified CM zip with a new updater.sh and a removed modem.bin over Darky.
EDIT: Solved. I guess I need CM7/MIUI specific modems from this thread: http://forum.xda-developers.com/showthread.php?t=1158783
You're right buddy, that's exactly what i was going to say after reading your post.
Sent from my GT-I9000
SiCRider said:
You're right buddy, that's exactly what i was going to say after reading your post.
Sent from my GT-I9000
Click to expand...
Click to collapse
Well, thanks...
Now if I can just figure out how to enable the "SIM Toolkit" app...