I'm planning on moving from a 2gb card to an 8gb card. I'm rooted, CM7 RC4 on emmc with Clockwork 3.0.1. Are there any root/system files that are typically stored on it that won't be tranferred easily by copy/paste onto the new card?
Not that I'm aware of. I haven't had any problems like that with the stock ROM or Nookie Froyo. Android OS will write those files directly, so unless CM made significant changes to the way Android writes system files, unlikely you'll see any issues. Cheers!
a few people report problems with class 10 sd cards. I have a class6 and class10. I've had a problem with one froyo build that i couldn't install on the card using my normal techniques. I was able to get it to run by setting it up on a class 6 and moving it to a class 10 later. my class6 is an 8gb and class10 is 16gb, so the size might have been part of the problem as the 16gb cards aren't as easy to setup using verygreens cm7 sd card prop instructions.
i'd say if you are concerned, get a 8gb class6, unless you are comfortable with resizing partitions and willing to monkey around a bit if you run into issues on a class 10 card.
rphillipps16 said:
I'm planning on moving from a 2gb card to an 8gb card. I'm rooted, CM7 RC4 on emmc with Clockwork 3.0.1. Are there any root/system files that are typically stored on it that won't be tranferred easily by copy/paste onto the new card?
Click to expand...
Click to collapse
I think you're referring to CM7 being stored on the internal, correct? if that's the case, you would be just transferring the user data stuff (and app data that is created from apps)you shouldn't have any problems transferring data from one to the other. I've done it a few times both with my nook and my droid.
Related
I just got my "new" nook and tried to boot Froyo 0.6.8 from an SD card. It just gets stuck at the blue ANDROID_ screen. I tried Froyo 0.6.7 and redoing 0.6.8 but it never got past ANDROID_. I'm using a new Transcend 4GB class 6 card. I first tried writing it using WinImage and my laptop's built in card reader, but when that card didn't boot I tried using a USB card reader and Win32diskimager. The Nook came with 1.1 on it and I haven't done anything to the internal rom.
Any ideas? How long should it stay on the Android_ screen if its working?
Did you figure this out?
This sounds like the classic failure described with 16GB cards on multiple threads. There's a nice consolidated thread on cards that are known to work. I'd check that. I have froyo working beuatifully on an 8Gb class6 transcend card.
Most likely you have some glitch on the card. I would do a complete deep wipe of the card (e.g. using SDformatter, all options). Then reflash with win32diskimager, then expand the SDcard partition with EASUS
it should boot in a couple of minutes tops the first time round.
I looked at those threads about cards before I bought one and the Transcend 4gb, class 6 I got is one that seemed to work.
I haven't been able to get the nook to boot off any card. I tried doing the format suggested and tried another 1gb PNY card with the bootable clockwork. I've tried writing with the internal SD writer in my laptop and with a Kodak (sakar) usb writer and with Win32DiskImager and WinImage.
I suppose the USB writer I have might not be good, but I don't want to get another one without knowing its one that works. So far I don't know whether the problem is with the cards I'm writing or for some reason this nook won't boot off SD card.
Thanks for the suggestions.
I probably had a flaky 4gb card. Now it won't format or write whatever I do.
dumb Q, but is the 1gb card you ahve also flaky now too... in which case it might well be the reader?
Will your nook stock OS read the SD card? (e.g. throw some photos ont here and see if the nook will show them) that way eliminate the nook.
There's some older threads that suggest first formatting the SD card with the nook stock OS, but I've never needed to do that.
I'd persevere - there's definately some plusses of froyo over the rooted B&N (especially if you use adhoc networks a lot), and you absolutely need nookie froyo as a backup incase you fry something when you take the plunge to CM7 (which is phenomenal, despite being so early in its release)
The 1gb I borrowed seems ok. I managed to boot a card with a bootable clockwork on it. I didn't do anything to Nook stock OS yet. I want to be clear that I can recover if I do first. I did get another reader, but I think it was probably the card. I wasn't able to boot of the 1gb at first because I was making a mistake in unzipping the .tar.gz files.
Do you have any pointers of where to find out about how to use Clockwork recovery?
I am using 0.6.7 on a 8gb class 6 Transcend... it's working great, no issues with booting.
Hello!
I'm planning to change my Xperia X8's SD Card.
I'm using Racht's custom rom, 2.2.1 CM Floyo v0.20, also found in XDA forums.
Of course, this offers the use of apps2SD.
Would it be ok if I just copy-paste the contents of my old SD Card to my new one?
Would I still be able to use (without any problems) the apps I transferred to my SD card from the phone storage?
In other words, will all my files (apps2SD transferred files also) in the old SD card still work if I just copy-paste them to the new SD Card?
Very sorry if my explanation is complicated.
Thanks!
Yes it should be fine.
How did the change of SD Card go?
Im about to do the same thing and was wondering i its possible to copy all contet from current SD Card to my PC and then copy it to the new SD Card.
jkolner said:
How did the change of SD Card go?
Im about to do the same thing and was wondering i its possible to copy all contet from current SD Card to my PC and then copy it to the new SD Card.
Click to expand...
Click to collapse
Sorry for the late reply.
I haven't really changed it yet due to my busy schedule. Hopefully, I would be able to find time.
I'll keep you updated!
As long as you did not partition the sd card with extended file system or any other fs that only linux can detect, there should not be a problem.
Sent from my LT15i using XDA App
If you have partitioned your old SD card with ext3 partition you can use any Linux live CD to simply copy/paste to your new card
superuser_
is mandatory to have two partitions with the same floyo0, 25. a standard card does not work like a normal android 2.2. roms or they also use the second partition as root and do the first time and we have to install link2sd to transfer apps to the memory card.
multiboot option
if u haven't already changed sd cards try to get a class 6 sd card as there have been multiboot options released, cm6 on phone memory and cm7 on sd card. check out multiboot thread on x8 development. two roms on one phone, its all gravy my friend.
ASHLEY117 said:
if u haven't already changed sd cards try to get a class 6 sd card as there have been multiboot options released, cm6 on phone memory and cm7 on sd card. check out multiboot thread on x8 development. two roms on one phone, its all gravy my friend.
Click to expand...
Click to collapse
how about a class 10 card? will it work on x8?
i think it will ok.
I changed from an 8 GB card to a 16. No problem at all. But my card doesn't support Multiboot. If you get a class 6 or higher you should be fine. You just need to copy a few files from the old card and it works fine.
I have just copied and pasted everything from one card to another, and it worked. It is great that now with rachts and doixhan's roms we have the support for app2sd!
Do you know if there is any way to test the speed of the SD directly from the phone? Thank you in advice!
I also am about to change out my SD card. I just upgraded from the stock 8gb card that I had partitioned which I did through ROM Manager to a brand new 16gb Class 10 SDcard
Is it also as simple as copying and pasting from my old SD card contents to the new one and boot it back up? Or would this delete the old ROM and stock ROM off of my SD card? I also wanted to know if I needed to partition this new card as well and if so, at what point do I do that?
I know this is probably really easy but I am new to flashing ROMS which is why I wanted to get a bigger and faster card! Thanks!
-Chris
I thought the lower number of class like class two was faster than say a class ten? I've been wondering this and saw this post. What do you guys think is faster?
Class 2 or 10?
Sent from my HD2 using xda premium
kylew1212 said:
I thought the lower number of class like class two was faster than say a class ten? I've been wondering this and saw this post. What do you guys think is faster?
Class 2 or 10?
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
The class 10 is faster and more expensive......
Hello,
Ok, first, the briefing:
I used verygreen´s Size-agnostic SD Card image and CM7 installer for SD Cards to run CM7 (installer 1.3 -> nightly 87 + gapps) on my nook. Works great. Kudos verygreen.
I tested 3 different SD cards to do so. Sadly, none of my Class 4 cards worked and only an old Class 2 2g Toshiba did the trick. Since I don´t intend to have a big fight with my wife about why I need to buy a 2nd. class 4 SD card this week, I am keeping the 2g Toshiba. (I know, I know, I should´ve bought a Sandisk Class 4 to begin with but they're a not easy to come by here in Brazil. At least, not a real Class 4).
And this is my problem:
The CM7 sees only 350 - 400 MB available in the "SD Card". That is hardly enough for HD games. Meanwhile, the "internal" memory has over 700 MB available.
What I'd like to do is:
Change the SD card partition to move some of the available space from the "internal" memory to the "SD card" on CM7.
Question:
Is it possible? How? Is it gonna mess up the CM7?
Alternatively, I was considering WobbleTheHutt method to swap SDcard and emmc. But, before I do it, I need to know if this method would affect the booting of the stock Nook. Does anyone knows?
Thnx.
I freaking did it!
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
santosacm said:
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
Click to expand...
Click to collapse
Hey! Nice idea.
I was looking for a method to backup my CM7(verygreen) SD card but I don't have a card reader with me currently.
Is is possible to backup complete SD card(all 4 CM7 partitions) using just the nook and windows??
P.S. I have Clockworkmod recovery installed onto emmc, if it's possible through that?
thanks.
santosacm said:
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
Click to expand...
Click to collapse
Why didn't you use GPE for both steps? I use it all the time and it works fine.
____________________________________________________
Sent from NookColor CM7 uSD using Tapatalk
I am sure this has been covered before but I finally made a boot SD for CM7 and while it works pretty good I want to try a class 4 sandisk SD card to see if its any faster. My question is can I just copy everything from my card now to the new card and insert it in my Nook?
Raydee35 said:
I am sure this has been covered before but I finally made a boot SD for CM7 and while it works pretty good I want to try a class 4 sandisk SD card to see if its any faster. My question is can I just copy everything from my card now to the new card and insert it in my Nook?
Click to expand...
Click to collapse
Not using windows explorer. But you can get the free program win32diskimager. It can read your card and write the image to your PC. Then you can write it to your new card.
Sent from my Nook Color running ICS and Tapatalk
uSD Card Size
Hi,
I notice a lot of Rom images say will will work in a 4GB card.
Is there any problems using a larger card, like 8GB?
Thanks.
Everett1954
Yep. Use above method to put your image file on anything up to 32gig card; be sure you are using Sandisk brand, though. Small block read/write speed makes this the Nookers choice.
I just migrated from an 8gb to 16gb Sandisk card last night. I used win32diskimager to make an image of the 8gb card and then wrote that to the 16gb card. I then had to use a combination of Linux GParted and EASEUS partition manager to modify the partition sizes. I wanted to make more space available for apps instead of the 1GB (I upped it to 2GB), and expanded the CM7 partition to fill the remainder of the drive. I booted from the new card and everything seems to be working fine.
Hi everybody:
Now I have installed hybrid CM10.1 on Nook HD in a 8G TF card. Then I would like to replace it with a new 32G card.
My question is how to transfer all the data, use the extra space and does not broke the system.
Thanks
Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Thank you! It works.
leapinlar said:
Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here
badger60 said:
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here
Click to expand...
Click to collapse
I had made an empty ".txt" file, then rename it to ".img". It may solve the problem.
badger60 said:
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here
Click to expand...
Click to collapse
Just type in a name. Like 8GB.img in the box. You do not have to actually create the file first, win32diskimager will create it. Then after it is done reading that write it back to your new card.
Sent from my Nook HD+ running CM10 on Hybrid SD
attempt number 25
leapinlar said:
Just type in a name. Like 8GB.img in the box. You do not have to actually create the file first, win32diskimager will create it. Then after it is done reading that write it back to your new card.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
OK. Thanks. I am giving that a shot. I am going to try it on the Sandisk 16GB class 4 card first and then on the Samsung 32 GB class 6 unit. I will post my results here.
The results were negative with theSandisk 16 GB class 4 and Samsung 32GB class 6 HDSC cards. The 32 GB card went into a loop with the appearance of the CWM graphics and back to the initial Nook image. I let it cycle perhaps 10 times. I then tried the 16 GB card and had the same results.
badger60 said:
OK. Thanks. I am giving that a shot. I am going to try it on the Sandisk 16GB class 4 card first and then on the Samsung 32 GB class 6 unit. I will post my results here.
The results were negative with theSandisk 16 GB class 4 and Samsung 32GB class 6 HDSC cards. The 32 GB card went into a loop with the appearance of the CWM graphics and back to the initial Nook image. I let it cycle perhaps 10 times. I then tried the 16 GB card and had the same results.
Click to expand...
Click to collapse
Since that did not seem to work for you, another option is to make a nandroid backup with your old card to internal memory. You might also want to save your files that you have on CM10SDCARD. Then reburn the new card, let it set itself up, flash CM, the converter and gapps to it. Then before you reboot, restore the backup you made earlier. It should then be set up the same when you reboot. Then restore your CM10SDCARD files.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
leapinlar said:
Since that did not seem to work for you, another option is to make a nandroid backup with your old card to internal memory. You might also want to save your files that you have on CM10SDCARD. Then reburn the new card, let it set itself up, flash CM, the converter and gapps to it. Then before you reboot, restore the backup you made earlier. It should then be set up the same when you reboot. Then restore your CM10SDCARD files.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Click to expand...
Click to collapse
I do appreciate the advice, but it didn't work on either SDHC card.
Sent from my Nook HD+ running CM10.0 on Hybrid
badger60 said:
I do appreciate the advice, but it didn't work on either SDHC card.
Sent from my Nook HD+ running CM10.0 on Hybrid
Click to expand...
Click to collapse
What do you mean it didn't work? Where did it fail? During backup, during new SD creation or restore?
Edit: If somewhere along the line of your trying to fix this, you installed a new image to a card and booted with it before you did a nandroid backup of your old card, you wiped out the internal /data for the old card and it is not retrievable. If you did that, you just have to start over.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
What do you mean it didn't work? Where did it fail? During backup, during new SD creation or restore?
Edit: If somewhere along the line of your trying to fix this, you installed a new image to a card and booted with it before you did a nandroid backup of your old card, you wiped out the internal /data for the old card and it is not retrievable. If you did that, you just have to start over.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
I followed your advice exactly. It appeared to work the same way that it did with the working 8GB SDHC card. I still have a nandroid backup of the old card on my PC. It just doesn't work on the two higher capacity SD cards I have. I see that I am going to have to look through the list and find the exact model of a 32 GB card that someone got working. It works fine on the Sandisk 8GB Class 4 card. The two Samsung cards (class 6) of 16 & 32 GB capacity that I own don't work. They are OK for storage use, but trying to install Android on them was a waste of time. I tried so many times. I used your tutorials and others tutorials unsuccessfully. A bum SD card is a bum SD card. I am not exactly a newbie at installing ROMs on devices . I have been doing it on my HTC Desire HD for about a year ever since HTC abandoned us and decided to not give us ICS or Jellybean for our expensive devices. I have Venom DHD on my HTC Desire HD at the moment. I am waiting for my new Samsung Galaxy s4 to arrive this week.