[Q] I9000 soft bricked - Galaxy S I9000 Q&A, Help & Troubleshooting

I need some help... Please!
I have a I9000T galaxy S phone and I soft bricked it. This is the story:
I flashed my phone using Odin with ROM JPY_JPY_JPY (downloaded form samfirmware, only file: PDA), and then flashed supermod-kernel-k13d-500hz...then I uploaded Modem UGJL2 for Froyo as an update.zip file (to get band 850 mhz for my country) and applied successfully!
My phone worked as a charm. No bricking.
Then I realized that there was a newer ROM: I9000XWJS5 with the XEN thing.
Since the ROM has the 3 files (MODEM, CSC, and PDA) and I read that it needed a different PIT, I flashed with the re-partition checkbox checked and with the 803 pit file.
It didn't get through. It got stuck at flashing sbl.bin
I had to unplug it after several minutes and I realized that it was soft bricked. It didn't work but download.
I tried to go back to JPY. After many tries and errors (changing PIT to 512 and repartitioning), finally I could flash back to JPY ROM. At the end of the process it reboots and the system get into Android system recovery <3e>. I can read at the bottom the following signs:
E: Can't mount /dev/block/stl10 (invalid argument)
E: copy_dbdata_media: Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed.
If I reboot the system, it boots and I see the splash "S" moving theme, and it seems that it is booting but then it stops and it starts vibrating from time to time... then the screen goes black and nothing happens (but vibrating from time to time). It never appeared the "login screen"
Reading here and there, some advised to flash first the speedmod-kernel with the PIT 512 file and re-partitioning. I did so, and then, after boot I was able to get into Clockworkmod recovery screen. The menu is green and the version is 2.5.1.0
Someone suggested to flash to JPU ROM (that way it fixed a similar problem) but when I did so, it takes me to the beginning (the process hung at sbl.bin)...
I've been flashing and reflashing with different options these 3 ROMs (JPU, JPY, JS5) the only one that completes the flashing successfully is JPY, and eventhough it tries to boot, it fails to present the logon screen (dots for password)... JPU and JS5 hang at sbl.bin and after that, no boot... freeze. I have to flash back to JPY.
I have read tons of forums, I have learned a lot, but I believe I need deeper advices.
Thanks in advance!

Some further information. JPU, JPY, JS5 are ROMs that were downloaded from samfirmware.com... I guess that is what you mean when you advice to flash any stock ROM. Am I right?

Guessing you have a I9000m. If yes, Flash JPC with 512 PIT and repartition ticked. You will still be in a boot loop. Take out battery and then load JL2 into PDA of ODIN and flash. You could try it even if you do not have an i9000m but at your own risk! Advice is free, phone isn't!

droilfade said:
Guessing you have a I9000m. If yes, Flash JPC with 512 PIT and repartition ticked. You will still be in a boot loop. Take out battery and then load JL2 into PDA of ODIN and flash. You could try it even if you do not have an i9000m but at your own risk! Advice is free, phone isn't!
Click to expand...
Click to collapse
No... I don't have a I9000m, I do have a I9000T
When I flashed the JPY it turned a I9000, but I applied the Modem UGJL2 which adds the 850mhz band (which is the only difference between the I9000T and I9000.
Someone suggested going to JM8 (Eclair 2.1), but I have read that in some cases it produces hardbrick... what do you think?

Oh, been there! I can give you some advice... First, i will recommend heimdall for flashing, it allows a little bit more of control with the files you want to flash. Then, i had this problem with the dbdata... i think it's becacause of the repartition thing, honestly i'm not sure but do not worry, if you can enter download mode it's recoverable.
So, let's try something. Download heimdall, install it, install your drivers and then download the rom in this post (it's and old build of Darky's Rom), the thing here is that you <<have>> to flash this with the command line client, so you can specify the order of the files to flash leaving at the very end the Sbl.bin and modem.bin (Both files can't be flashed neither with heimdall nor Odin in my Galaxy i9000T). Obviulsy the heimdall flash will fail with the Sbl.bin file, so you just pull out your battery and power up your phone. That should do it... it have failed a couple of time for me, so if it fails for you (It gives you a boot loop) tell me so i can share my other method. If this works you should be able to enter CWM and flash a custom ROM or be able to flash another stock rom but be careful, do not flash bootloaders, modems or do a repartition (That's why i prefer Heimdall over Odin).
I hope you could have your phone back.

froysm said:
Oh, been there! I can give you some advice... First, i will recommend heimdall for flashing, it allows a little bit more of control with the files you want to flash. Then, i had this problem with the dbdata... i think it's becacause of the repartition thing, honestly i'm not sure but do not worry, if you can enter download mode it's recoverable.
So, let's try something. Download heimdall, install it, install your drivers and then download the rom in this post (it's and old build of Darky's Rom), the thing here is that you <<have>> to flash this with the command line client, so you can specify the order of the files to flash leaving at the very end the Sbl.bin and modem.bin (Both files can't be flashed neither with heimdall nor Odin in my Galaxy i9000T). Obviulsy the heimdall flash will fail with the Sbl.bin file, so you just pull out your battery and power up your phone. That should do it... it have failed a couple of time for me, so if it fails for you (It gives you a boot loop) tell me so i can share my other method. If this works you should be able to enter CWM and flash a custom ROM or be able to flash another stock rom but be careful, do not flash bootloaders, modems or do a repartition (That's why i prefer Heimdall over Odin).
I hope you could have your phone back.
Click to expand...
Click to collapse
Thank you froysm... What I see in your post is that we are going to try to flash a Darky's ROM in order to have CWM so we can flash a custom rom?
If that is so... I already have CWM... It is version 2.5.1.0 with its menu in green.
What is custom rom? are they the roms from samfirmware? I tried JPU and JS5 and they hang at slb.bin... the only one that flashes successfully is JPY, and eventhough it "runs", somehow it is not working.

In regard heimdall... Do I have to have ubuntu in order to install it? Is there a heimdall for windows?

Well, if you have CWM try one of the roms of the world famous romkitchen Cook a rom, download it, enter recovery mode, go to mounts & storage (and connect your phone to the computer) and select mount USB storage, put the donwloaded zip file in your phone. Then unmount, go bak to the main CWM menu, select install zip from sdcard, the choose zip from sdcard, find your rom and flash it! However... as far as i can remember i could never mount my phone with CWM 2.x so may need to flash Darky's Rom just to be able to mount your phone, put the zip file there and then reflash with the new ROM viw CWM...

jdelagarza said:
In regard heimdall... Do I have to have ubuntu in order to install it? Is there a heimdall for windows?
Click to expand...
Click to collapse
Yes, heimdall is available for Windows here It's pretty straight forward, just put your phone in Download mode, select the files you want to flash and hit start.

froysm said:
Yes, heimdall is available for Windows here It's pretty straight forward, just put your phone in Download mode, select the files you want to flash and hit start.
Click to expand...
Click to collapse
Thank you... believe it or not you poured some light into my darkness.
I have 3 issues and I hope you can clarify...
How would you order flash methods, in order of importance? Odin, CMW, heimdall? Which one is better, which one is worse?
I'm able to flash speedmod-kernel-k13d-500hz... that is what brings me the CMW v2.5.1.0.... should I try to install a newer version of CMW? or should I stick with heimdall option?
Flashing ROMs such as Darky's rom can be potentially harmfull? I mean, can my phone end with a hardbrick?

jdelagarza said:
Thank you... believe it or not you poured some light into my darkness.
I have 3 issues and I hope you can clarify...
How would you order flash methods, in order of importance? Odin, CMW, heimdall? Which one is better, which one is worse?
I'm able to flash speedmod-kernel-k13d-500hz... that is what brings me the CMW v2.5.1.0.... should I try to install a newer version of CMW? or should I stick with heimdall option?
Flashing ROMs such as Darky's rom can be potentially harmfull? I mean, can my phone end with a hardbrick?
Click to expand...
Click to collapse
Don't worry, that is exactly why we are here to learn from other people experience and share what we have learned.
About your issues,
I only have access to my Linux machine and heimdall says this when i ask for help (with the command
Code:
heimdall help
Usage: heimdall <action> <arguments> [--verbose] [--delay <ms>]
action: flash
arguments:
--repartition --pit <filename> --factoryfs <filename>
--cache <filename> --dbdata <filename> --primary-boot <filename>
--secondary-boot <filename> --param <filename> --kernel <filename>
--modem <filename>
So, what you have to do is navigate to the location of your files and write something like this
Code:
heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --dbdata dbdata.rfs --cache cache.rfs --param param.lfs --kernel zImage --primary-boot boot.bin --secondary-boot Sbl.bin --modem modem.bin
See how i reordered the files to flash leaving at the very end Sbl.bin and modem.bin?
As i told you before this will fail because of the last files, but it will allow to flash everything else. Remove your battery, put it again and try to boot your phone.
I forgot to tell you something really important!! Since the flash in going to fail it will give you the <<scary>> "Connect phone to PC" screen, but don't worry, heimdall can take care of that. Again, asking heimdall for help in the command line says something like this:
action: close-pc-screen
description: Attempts to get rid off the "connect phone to PC" screen.
And that is exactly the next step to take, write down in your command line (with the pone connected to the pc and in download mode)
Code:
heimdall close-pc-screen
And that's it, wait for the phone to boot.
This method is the one i advise when you just can enter Download Mode or when you really need to repartition.
Better? Worse? Nah, they are just really different approaches, Odin is the Samsung standard, Heimdall came to the game because it's OS X and Linux compatibility and CWM allows you to control your phone, custom kernel settings, flash updates packages with modems, boot animations , even whole roms without the need of a cable to connect your phone to a PC and other really cool stuff. Generally, since i've been in custom roms (like darky's, romkitchen, ultimate, etc) since i got this phone, i only use CWM, and when i have a big problem or i need a stock rom i use Heimdall (because i'm on Linux).
The CWM version is just fine, not all the roms are compatible with CWM 3 at the moment, so just make sure you can mount your phone in your pc with CWM. Try first the CWM option, if you can't mount it or it just don't works try the heimdall option.
The last question, I'm not saying it's 100% safe because it is not, but not only custom roms, this also can happen flashing a rom with Odin or Heimdall. Honestly i haven't heard of someone who bricked a phone in the whole thread of the romkitchen or darky's rom. I mean, it could happen, even with a perfectly stable stock rom. but it's not so common, at most, the worst thing you will encounter in your custom rom experience is a lot of Force Closes in applications (if you mix data and apps from incompatible versions) maybe a couple of boot loops, but nothing to be really scared about, just make sure you can enter Download Mode and everything will be fine.
Phew! The longest post if ever written in any forum. I hope i made everything clear, if you happen to have any other question i'll be happy to answer it (But it will have to wait for tomorrow... you know, it's midnight).

Thanks...
I'm downloading darky_heimdall.zip. As soon as it is downloaded, I will try it.
Just for your information, with CMW I tried to mount the USB and it worked!
So, now I am at a dilemma... Should I flash darky with CMW or heimdall?
Oh, if you wanted to know how I managed to install a WORKING STOCK ROM with froyo... here is the tutorial that I followed:
http://neosystm.com/2010/12/actuali...000t-a-froyo-2-2-1-xxjpy-de-forma-no-oficial/
It worked as a charm... I had Froyo 2.2.1 with JPY ROM.
The problem began when I tried to update it to JS5 ROM.
Cheers!

I just finished downloading darky's rom...
I noticed that it has 3 .bin files: boot.bin, modem.ini and slb.bin
I was curious about the content of my previous working ROM (JPY) and the not working ROMs (JPU and JS5).
I found that JPY has only the modem.bin file.
and JPU & JS5 have boot.bin and slb.bin (but no modem.bin).
Question: Since you advised to install darky's rom and but the sbl.bin file at the end, so my phone can get flashed with everything but slb.bin, can I do the same with the JS5 ROM?
I look forward to your response...

OK... I tried to flash darky's rom with CMW... it said:
"Installing: SDCARD: darky_heimdall.zip
Finding update package...
Opening update package...
Installing update..."
And it hung... I guess this was expected due the slb.bin...
I'm gonna try the heimdall method.
So, what do you think? Should I try it with JS5 or with darky's rom?
Cheers

Ok... I flashed with heimdall.
This is the result:
Claiming interface... Success
Setting up interface... Success
Beginning session...
Handshaking with Loke... Success
Uploading PIT file
PIT file upload successful
Uploading factory filesytem
100%
Factory filesytem upload successful
Uploading cache
100%
Cache upload successful
Uploading data database
100%
Data database upload successful
Uploading primary bootloader
100%
Primary bootloader upload successful
Uploading secondary bootloader
100%
Failed to confirm end of file transfer sequence!
Secondary bootloader upload failed!
The last two sentences appeared when I unplugged the phone after a 10-minute wait.
I removed the battery, and put it back again. Turned my phone on, and I've got the picture of the cell phone - computer hazard. I'm able to enter download.
What's next?

Froysm, do you know what's the original ROM that telcel uses to ship our Galaxy' S?

jdelagarza said:
Froysm, do you know what's the original ROM that telcel uses to ship our Galaxy' S?
Click to expand...
Click to collapse
I've found a thread that says that they fixed it going back to JM8 ROM, and then moving back to Froyo 2.2.
Does anyone know any potential damage of such flashing?
I read this post http://forum.xda-developers.com/showthread.php?t=780867
And it seems that downgrading can lead to corruption and hard bricking.
Does anyone know?

Hey, sorry i didn't answer sooner, let's see...
jdelagarza said:
I just finished downloading darky's rom...
I noticed that it has 3 .bin files: boot.bin, modem.ini and slb.bin
I was curious about the content of my previous working ROM (JPY) and the not working ROMs (JPU and JS5).
I found that JPY has only the modem.bin file.
and JPU & JS5 have boot.bin and slb.bin (but no modem.bin).
Question: Since you advised to install darky's rom and but the sbl.bin file at the end, so my phone can get flashed with everything but slb.bin, can I do the same with the JS5 ROM?
I look forward to your response...
Click to expand...
Click to collapse
Yes, you can.
jdelagarza said:
OK... I tried to flash darky's rom with CMW... it said:
"Installing: SDCARD: darky_heimdall.zip
Finding update package...
Opening update package...
Installing update..."
And it hung... I guess this was expected due the slb.bin...
I'm gonna try the heimdall method.
So, what do you think? Should I try it with JS5 or with darky's rom?
Cheers
Click to expand...
Click to collapse
That specific version of Darky's rom is intended only for heimdall, so it will obviously fail. You'll see, some files can just be flashed via CWM and some can just be flashed with Odin and Heimdall, be careful and read with which tool can be flashed.
jdelagarza said:
Ok... I flashed with heimdall.
This is the result:
Claiming interface... Success
Setting up interface... Success
Beginning session...
Handshaking with Loke... Success
Uploading PIT file
PIT file upload successful
Uploading factory filesytem
100%
Factory filesytem upload successful
Uploading cache
100%
Cache upload successful
Uploading data database
100%
Data database upload successful
Uploading primary bootloader
100%
Primary bootloader upload successful
Uploading secondary bootloader
100%
Failed to confirm end of file transfer sequence!
Secondary bootloader upload failed!
The last two sentences appeared when I unplugged the phone after a 10-minute wait.
I removed the battery, and put it back again. Turned my phone on, and I've got the picture of the cell phone - computer hazard. I'm able to enter download.
What's next?
Click to expand...
Click to collapse
As I told you on my last post, heimdall can take care of that. Just put your phone in Download Mode and write heimdall close-pc-screen. That should solve your problem.
jdelagarza said:
Froysm, do you know what's the original ROM that telcel uses to ship our Galaxy' S?
Click to expand...
Click to collapse
Nope, i've never found it (actually i've never needed it).
jdelagarza said:
I've found a thread that says that they fixed it going back to JM8 ROM, and then moving back to Froyo 2.2.
Does anyone know any potential damage of such flashing?
I read this post http://forum.xda-developers.com/showthread.php?t=780867
And it seems that downgrading can lead to corruption and hard bricking.
Does anyone know?
Click to expand...
Click to collapse
Try my methods first, I've tested them a lot and never had a real problem. If you want to try this, go ahead. As i told you before it's very rare to hear a phone really bricked, most of the times it's recoverable.

Oh, I forgot the heimdall close-pc-screen.
Ok... I tried it twice.
The first time my command prompt was busy trying to upload sbl.bin, so I opened another command prompt and I threw the command. The result: "Failed to access device. Error: -3"
The second time I waited until the flashing ended with error, and then I threw the command (within the same command prompt). The result: "Failed to retrieve config descriptor"
Hmmm... what was the other method that you mentioned in your first post?
In the other hand, can you read the following post, and could you go through all the comments after the post. Pay special attention to Jedi and GSCATIL...
http://foro.neosystm.com/f19/androi...00xxjvk-%96-beta-para-el-samsung-galaxy-s-69/
Jedi describes my exact problem (about the phone vibrating), and GSCASTIL is from Puebla, so he is with Telcel as well...
My problem didn't happen updating to gingerbread... It happened updating to JS5 (Froyo).
Hope this helps... what do you think?

jdelagarza said:
Oh, I forgot the heimdall close-pc-screen.
Ok... I tried it twice.
The first time my command prompt was busy trying to upload sbl.bin, so I opened another command prompt and I threw the command. The result: "Failed to access device. Error: -3"
The second time I waited until the flashing ended with error, and then I threw the command (within the same command prompt). The result: "Failed to retrieve config descriptor"
Hmmm... what was the other method that you mentioned in your first post?
In the other hand, can you read the following post, and could you go through all the comments after the post. Pay special attention to Jedi and GSCATIL...
http://foro.neosystm.com/f19/androi...00xxjvk-%96-beta-para-el-samsung-galaxy-s-69/
Jedi describes my exact problem (about the phone vibrating), and GSCASTIL is from Puebla, so he is with Telcel as well...
My problem didn't happen updating to gingerbread... It happened updating to JS5 (Froyo).
Hope this helps... what do you think?
Click to expand...
Click to collapse
Always, after any task completed successfully or unsuccessfully either with Heimdall or Odin, unplug your phone, reboot it, put it again in download mode and connect it. So do that again, flash, wait for the fail, unplug, reboot, download mode again, connect again and try to remove the error screen with heimdall.
I will read that post and see what i can find (I can't read it right now, sorry).

Related

[Q] Samsung Galaxy S: Black Screen after Flash

I have a SGS with firmware I9000XWJG5 and Root. I tried to do a Speed fix, but afterwards it was slower so i tried to flash the phone with the I9000XWJG5 firmware again.
After the flash, the phone rebooted and i came to the recovery menu. There the phone wrote:
update media, please wait
and in the next lines:
E: Can't mount /dev/block/st110
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.
Now when i try do start the phone, i get a black screen after the bright S
What i have tried: Flash agein with and without re-partition and Factory Reset
Has anybody an idea what i can do?
and sorry for my bad english
bump. can anyone help with this topic..
i am having some problem..
help us guys
thanks
Fixed... use odin 512
Thread moved in Galaxy S I9000 General.
I can definately help with this one, as I worked through it last night...
I found that if you're trying to flash the JG5 rom (as mentioned in Modaco's thread) with the 513 Pit file, then you'll get the black screen of despair!! For some reason the two combination of the two don't work.
However, if you do a google search for Odin PIT 512, then download this file
You will be able to download the 512 PIT file instead. Now use this in Odin3 to flash the JG5 rom and you should have no further issues....it worked for me.
I also discovered that Samsung have just released a later firmware, so I just flashed this one on top of the JG5 one...I have a nicely running phone now.
Hope this helps...it did me!
Mike
Mine was completely knackered. Couldn't get to recovery either. Flashed Modaco's MCR R3, after the JG5 flash, using all the files in the JG5 download. Working a treat...
Cheers,
BS...
blacksoul93 said:
I have a SGS with firmware I9000XWJG5 and Root. I tried to do a Speed fix, but afterwards it was slower so i tried to flash the phone with the I9000XWJG5 firmware again.
After the flash, the phone rebooted and i came to the recovery menu. There the phone wrote:
update media, please wait
and in the next lines:
E: Can't mount /dev/block/st110
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.
Now when i try do start the phone, i get a black screen after the bright S
What i have tried: Flash agein with and without re-partition and Factory Reset
Has anybody an idea what i can do?
and sorry for my bad english
Click to expand...
Click to collapse
hello, i got the same problem. trying to reflash with I9000XXJPY 2.2.1 and the 512 pit, but still the same problem.
ash969 said:
hello, i got the same problem. trying to reflash with I9000XXJPY 2.2.1 and the 512 pit, but still the same problem.
Click to expand...
Click to collapse
Same here.
I tried JS3 and going back to JP6....and always the same result.
I'm obviously missing something. Maybe my 512.PIT is corrupted. I get the black screen and the same /dev/block.st110 errors in recovery.
i beleive you need to have a CSC file also for the odin flash.
i sorted mine like this:
Downloaded some JP2 odin files [used this as this was the only one on Samsung-firmwares that had all 3 PDA, Modem and CSC Files. flashed this using a .512 pit in odin. - this allowed the phone to boot normally.
connected to Kies and using reg hack [set to XEU] managed to update to JPY.
the following the Darky guide, flashed the CF Root kernel, installed the ROM Manager from the market, using the recovery mode installed the update.zip file for clockworkMod.
Formatted everything in ClockworkMod
Factory Reset in ClockworkMod
Installed Darky ROM V8.0 Wipe
thanks for your find !
Rumble6059 said:
i beleive you need to have a CSC file also for the odin flash.
i sorted mine like this:
Downloaded some JP2 odin files [used this as this was the only one on Samsung-firmwares that had all 3 PDA, Modem and CSC Files. flashed this using a .512 pit in odin. - this allowed the phone to boot normally.
connected to Kies and using reg hack [set to XEU] managed to update to JPY.
the following the Darky guide, flashed the CF Root kernel, installed the ROM Manager from the market, using the recovery mode installed the update.zip file for clockworkMod.
Formatted everything in ClockworkMod
Factory Reset in ClockworkMod
Installed Darky ROM V8.0 Wipe
Click to expand...
Click to collapse
thanks mate ! after a huge scare sorted mine with this firmware as well, this after I tried several other newer firmware packages from samfirmware and was ,slowly but surely ,starting to lose hope ...
for some reason this particular firmware JP2 seems to fix this problem
cheers and thanks again for your find !
fix for black screen after flash with no recover or download mode working.
Hey All.
So like the subject says, you flash and then your phone restarts or whatever, and then you get the normal galaxy s startup, with the sound and the visuals, but then that's it. Henceforth you are greeted with the two lights (if its a Bell Vibrant) from your options and back keys.
To fix it use the attached file. Its called ADB or something - I just know it works. It was a fix for the galaxy s phones that didnt have the recovery/download mode stock.
so here is how it goes:
1. download adb to your desktop and unpack it (if its in winrar or zip or whatever) to a file folder named adb.
2. open a command prompt.
3. type "cd" and then the address of the "adb" folder. so for example it should be in C:\Users\your user name\Desktop\adb. where "your user name" is your user name a duh.
4. plug in your galaxy s via usb.
5. type "adb reboot download" in the command prompt. copy it using your mouse as well.
6. turn on your phone.
7. press enter in the command prompt, then keep copying and pasting and pressing enter until you see the download screen on your phone. each time you press enter it says device not connected or something but just keep trying.
the article i read:
can't post it but the thread is called "How to get the 3 button recovery mode working"
Credit to Goots from samsung galaxy s forums. Go Goots!

Solution JPM Not Prepared your storage yet, please use UI menu for format and reboot

On first boot I get
Can not mount / dev/block/stl10 (Invalid argument)
copy_dbdata_media: Can not mount DBDATE
Not Prepared your storage yet, please use UI menu for format and reboot actions
default copy content failed half
wiping / data cache and Does not Seem To fix anything.
Format sdcar unresponsive
HELP any occurrence and brick my phone
criskelo said:
On first boot I get
Can not mount / dev/block/stl10 (Invalid argument)
copy_dbdata_media: Can not mount DBDATE
Not Prepared your storage yet, please use UI menu for format and reboot actions
default copy content failed half
wiping / data cache and Does not Seem To fix anything.
Format sdcar unresponsive
HELP any occurrence and brick my phone
Click to expand...
Click to collapse
Go to Download Mode and flash ROM XWJM8 with pit512 and Re-Partition,after flash XXJPM with pit803 and without Re-Partition-this help
sardor said:
Go to Download Mode and flash ROM XWJM8 with pit512 and Re-Partition,after flash XXJPM with pit803 and without Re-Partition-this help
Click to expand...
Click to collapse
Fixed in a while I explain
My solution
With Odim 1.3, pit 512,
in my case JH2 I9000T GT
But for Europe JM8
Mark Re-partition, phone EFS clear and Phone bootloader Update
Then start
This process started well
JPM Process
Then uncheck re-partition, phone EFSclear and Phone Bootloader Update
JPM Pit 803 and firm JPM
Start
To enjoy
Thanks
criskelo said:
Then uncheck re-partition, phone EFSclear and Phone Bootloader Update
Click to expand...
Click to collapse
Is it normal for T model, or you just use weird and dangerous settings for fun?
Wiping EFS can lead to test-imei number and broken product code. Be sure you haver a backup of that folder before wiping that.
criskelo... I tried this and I didn't get anywhere :/
I had the same issue and it took me 2 hours to resolve (with a lot of pain, lol).
I've simply flashed the XWJM8 version using odin 1.3, no pit file and HENCE no repartition ticked.
It then booted to recovery console, because there was another error (can't remember which one cause I was too excited).
Anyway I did a wipe, cash clear and reformat SD card at the menu and let it boot.
After that I have flashed the latest version XXJPY also without PartitionInformation Table. (PIT). Then all the wipe and format stuff again.
I have now to go from scratch to setup anything again, but hey, at least my phone is alive again.
Some additional info. I also had that connection symbol on the screen with exclamation mark and triangle....so I thought I was done (due to trials with pit 512 which hung), but after removing battery and some trials I was able to enter download mode again....
Why happened that? I DON'T KNOW! I simply wanted to reflash the XXJPY stock rom, this time with pit512 and it lead to the topic of this thread!!!
This su**ed a lot, I didn't even modify something before!!!!
So: Less is even more! Don't fiddle with EFS and bootloader options it worked for me even without a pit!
Thanks to sardor for the initial idea, the XWJM8 seems to be a fixing rom for that when used properly, anyway to load a pit without to tick repartition is not a useful setting!
Well I was a long time reader at this great forum, IMHO the best regarding phone stuff, because there is the most useful knowledge shared.
I hope my first post will save other phones as well from sending it to repair.
Thanks I'm happy again..(let's see how long it'll last..lol...)
bricked my samsung galaxys and recoverd it
Hi I had exact same problem I totally bricked my i9000 Australian Optus version
I used
I9000DTJG4 firmware Australian Optus
With pit 512
And odin3 v1.3
Got all the files from
samfirmware . com / WEBPROTECT - i9000 . htm
Had to sign up but it’s free
However following criskelo's advice I unchecked the re partion box in odin
Even though the site above tells u to check it
And it worked
Thanks for everyone’s help on this thread.
Without you I would have had an expensive paper waited
Also the reason I got here in the first place as because I messed around with lag fix in clockwork recovery when I don’t know anything about it.
I was lucky this time but it’s really not worth playing around with things you doing understand.
sardor said:
Go to Download Mode and flash ROM XWJM8 with pit512 and Re-Partition,after flash XXJPM with pit803 and without Re-Partition-this help
Click to expand...
Click to collapse
I was messing with Darky's Rom which alway cause problems for me and found myself in the same situation as the first post.
What worked for me.
JM8 (2 files = code to PDA - Modem to PHONE) + Repartition + 512pit
after reset different error so goto download mode again then:
JPM + 803pit
Default OS reconfigures, Thank Fook
Awesome, thanks buddy! I have spent too much time trying to fix this phone and it all totally pays off now!
Here is the fix for the Bell firmware:
Background info: I orginally tried the Lagfix and bricked my phone, this is how I finally fixed it...
1. Using Odin v1.82
Put Phone in download mode
Use PDA: I9000UGJH2
Use Phone: Modem.bin
(both files came from samfirmware, I9000UGJH2 download)
Use: 512.pit(also from samfirmware at the bottom of the i9000 page)
Check Re-Partition, Auto-reboot, F. reset time, phone EFS clear and Phone bootloader update. I know everyone above says don't but I tried their way first and it didn't work, I would recommend you do try their way first and if no results try mine.
2. Using Odin v1.82
Put Phone in download mode
Use PDA: I9000UGJL2
Use 803.pit
Check only Auto-reboot, F. reset time
Good luck! I hope you do your happy dance like I did!!
crazycanuckeh said:
Awesome, thanks buddy! I have spent too much time trying to fix this phone and it all totally pays off now!
Here is the fix for the Bell firmware:
Background info: I orginally tried the Lagfix and bricked my phone, this is how I finally fixed it...
1. Using Odin v1.82
Put Phone in download mode
Use PDA: I9000UGJH2
Use Phone: Modem.bin
(both files came from samfirmware, I9000UGJH2 download)
Use: 512.pit(also from samfirmware at the bottom of the i9000 page)
Check Re-Partition, Auto-reboot, F. reset time, phone EFS clear and Phone bootloader update. I know everyone above says don't but I tried their way first and it didn't work, I would recommend you do try their way first and if no results try mine.
2. Using Odin v1.82
Put Phone in download mode
Use PDA: I9000UGJL2
Use 803.pit
Check only Auto-reboot, F. reset time
Good luck! I hope you do your happy dance like I did!!
Click to expand...
Click to collapse
hey how did it worked for you. Not working for me.
did you extracted the tar file? which file did you loaded into the pda tab then ?
Didnt worked for me at all
sardor said:
Go to Download Mode and flash ROM XWJM8 with pit512 and Re-Partition,after flash XXJPM with pit803 and without Re-Partition-this help
Click to expand...
Click to collapse
you saved my phone after me corrupting internal SD! just did my victory dance though hands still shaking a bit
Just thought I would add to what got my phone back running again after having the Can't mount DBDATA error. It's a bell I9000M.
Used Odin 1.3 , Flashed Darky's resurection per his instructions pulled battery once complete, went back into download mode and flashed stock JL2 with Odin , re-partition un-checked and no Pit file and after that my phone was running again.
You can find Darky's Resurection Here!
Can not find the link for the JL2 stock rom but it's in the general section somewhere.
the xxjpu version worked for me
tlick repartition
add 512 pit
tick and add pda
tick and add modem
tick and add csc
go to download mode
connect usb
press start
Need help with Fascinate
Hey guys, I've read the above posts but frankly it's above my skill.
Some how I ended up with the same message that the OP got.
Can someone walk me through the steps to completely fix my phone and get it back to bone stock?
I'm not familiar with PIT and other files. I need someone to hold me hand on this one...
cddt said:
I was messing with Darky's Rom which alway cause problems for me and found myself in the same situation as the first post.
What worked for me.
JM8 (2 files = code to PDA - Modem to PHONE) + Repartition + 512pit
after reset different error so goto download mode again then:
JPM + 803pit
Default OS reconfigures, Thank Fook
Click to expand...
Click to collapse
Was also messing around with darky. decided to go back to 9.5 for now. also got the error, then did what cddt said (thanks!!).
first flash - different error (something about CSC)
for second flash i used JS7 + 803pit + no repartitioning
worked flawlessly Thanks!
Stuck in boot loop
Samdroid_G_S said:
Just thought I would add to what got my phone back running again after having the Can't mount DBDATA error. It's a bell I9000M.
Used Odin 1.3 , Flashed Darky's resurection per his instructions pulled battery once complete, went back into download mode and flashed stock JL2 with Odin , re-partition un-checked and no Pit file and after that my phone was running again.
You can find Darky's Resurection Here!
Can not find the link for the JL2 stock rom but it's in the general section somewhere.
Click to expand...
Click to collapse
Hi,
I have bell sgs and I tried this and since then my phone is on boot loop. I can only go in download but not recovery. IT all started when I installed the boot loader for gingerbread...
Flashing Error - resolved
cddt said:
I was messing with Darky's Rom which alway cause problems for me and found myself in the same situation as the first post.
What worked for me.
JM8 (2 files = code to PDA - Modem to PHONE) + Repartition + 512pit
after reset different error so goto download mode again then:
JPM + 803pit
Default OS reconfigures, Thank Fook
Click to expand...
Click to collapse
Just followed this and it worked a treat thank you
Hi there,
I am having issues the same way. I am unable to do something. Can some explain me the procedure how to do it.
From where can i get the files.
Please help me out

(Bricked?) [E:Can't mount] Used Odin to restore back to stock now it won't boot up

I have a Rogers i896 build 10.10 running froyo. I just tried to restore back to stock rogers froyo JL1 using Odin 1.81 and using a 512 pit file. I entered into download mode and the odin process complete then the phone reboots.
Now it entered into android system recovery <3e> . with this menu:
Reboot system now
reinstall packages
delete all user data
delete cache data
format internal sd-card
it also says the following...
update media, please wait
E: Can't mount /dev/block/stl10
(Invalid argument)
E:copy_db_data_media:Can't mount DBDATA:
your storage not prepared yet. please use UI menu for format and reboot actions
copy default media content failed.
Click to expand...
Click to collapse
I'm a complete noob at this.. I read a lot and thought i'll give it a shot to flash a new rom.
Update. Tried to reflash, didn't work.
Tried to reflash with Stock Rogers Eclair, didn't work just went to the Recovery <2e> same error message with can't mount ....
I think this is bricked...
Any way around this?
did you just use the pit file and thats it? did you use the tar file in the pda slot as well?
Pirateghost said:
did you just use the pit file and thats it? did you use the tar file in the pda slot as well?
Click to expand...
Click to collapse
I used the stock rogers froyo tar file from this link
http://forum.xda-developers.com/showthread.php?t=905042
My phone can't even be turned off. I tried all the options in the menu and it gives me the same error message.
I think the only way to turn it off is if I remove the battery
likiud said:
My phone can't even be turned off. I tried all the options in the menu and it gives me the same error message.
I think the only way to turn it off is if I remove the battery
Click to expand...
Click to collapse
Sounds like a bad flash, can you get into download mode and try a reflash?
I just pulled out the battery to turn it off, and managed to get to download mode again. This time I tried odin 1.7. Odin says passed... but still the same error message
One thing I noticed that the re-partition check box on odin is checked when i put the pit file in there. I didn't realized it was checked so I clicked start with that on. It wasn't checked when I first opened the program. I just tried to reflash with it off, and same result
Is there no one here that can fix it?
I did some more searching around and found this post from the i9000 forums...
http://forum.xda-developers.com/showpost.php?p=8683455&postcount=7
I guess I was suppose to uncheck re-partition and the stock rogers roms does not include cache.rfs and dbdata.rfs file inside.
Anyone know if there's a way to get a ROM that includes those files in them so I can reflash it?
here i used this stock 2.1 with odin 1.7 and it worked.
http://dl.dropbox.com/u/19201431/SGH-I896_UXJI2StockRogers2.1.zip
your phone isnt bricked. bricked is a specific thing and has a special screen.
flash 2.1 when doing stock. 2.2 stock includes 3e recovery and it requires all update.zip files to be digitally signed. there is a way around it but its extra steps. instructions here
http://forum.xda-developers.com/showthread.php?t=909213
I tried to flash to stock 2.1 with odin but same thing happened.
It boots into recovery and i can't do anything... except its 2e instead of 3e that i saw before.
whats the exact filesize of the tar you used?
also if you dont re-partition, you dont need a pit file. (the p stands for partition)
The exact file size for the TAR is 238 MB (250,420,736 bytes)
I didn't know PIT is re-partition until after the fact.
Ok, I'm going to see if I can get my phone in the same condition as yours and then fix it. BRB...
Broke it and fixed it. Details in a sec.
Ok my steps to break it:
Flashed UXJL1 with Odin 1.81 using 512.pit and repartition checked.
Boot lands in recovery with can't mount error.
Steps to fix.
Used Odin 1.81 to flash the JH2 firmware from this post: http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36.
Did not check partition, did not load a pit file.
I've seen that error before but I couldn't remember how I fixed it. I think the key is simply to Odin flash 2.1 firmware using no pit and no repartition. I chose the package above because it doesn't change your boot loader and is compatible with newer phones.
flash into the AT&T 2.1 with the one click, what you probably did was Odin into the rogers 2.2 without turnning off lagfix. for some reason the rogers version doesnt actually repartition your phone.
opcow said:
Ok, I'm going to see if I can get my phone in the same condition as yours and then fix it. BRB...
Broke it and fixed it. Details in a sec.
Ok my steps to break it:
Flashed UXJL1 with Odin 1.81 using 512.pit and repartition checked.
Boot lands in recovery with can't mount error.
Steps to fix.
Used Odin 1.81 to flash the JH2 firmware from this post: http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36.
Did not check partition, did not load a pit file.
I've seen that error before but I couldn't remember how I fixed it. I think the key is simply to Odin flash 2.1 firmware using no pit and no repartition. I chose the package above because it doesn't change your boot loader and is compatible with newer phones.
Click to expand...
Click to collapse
Thank you so much! This worked! Except it now shows ATT for a brief moment but that's not a big issue. I went ahead and installed Serendipity smoothly!
opcow said:
Ok, I'm going to see if I can get my phone in the same condition as yours and then fix it. BRB...
Broke it and fixed it. Details in a sec.
Ok my steps to break it:
Flashed UXJL1 with Odin 1.81 using 512.pit and repartition checked.
Boot lands in recovery with can't mount error.
Steps to fix.
Used Odin 1.81 to flash the JH2 firmware from this post: http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36.
Did not check partition, did not load a pit file.
I've seen that error before but I couldn't remember how I fixed it. I think the key is simply to Odin flash 2.1 firmware using no pit and no repartition. I chose the package above because it doesn't change your boot loader and is compatible with newer phones.
Click to expand...
Click to collapse
there is a new fix for reference! no ATT boot logo/ fix ATT boot logo and NO dbdata error!!!
http://forum.xda-developers.com/showthread.php?t=979133
link in my sig too!

Galaxy s won't boot

Hi there,
i've a problem with my galaxy s. whatever i do it will not boot i tried several roms and flash these with odin but nothing seems to work.
Till today i only saw a icon like when you're loading a movie, today i flashed another file and now i only see the battery.
After flashing this file (I9000DDJG4) he showed a screen equal to when you install a rom by choosing it in recovery mode.
the only thing i can get in is download mode(sometimes with the 3bc, other time with a home made jig), odin reconize it and flashing will be fine till he must boot.
before i repaired 2 other galaxy S phones without any problems but this is a hard one.
anyone with the same problem or a solution for this? i really don't know what to do now.
(if my english is a little poor, excuse me i'm just a stupid dutchman )
Do you have a charged battery?
When you start the phone the first time after uploading rom, it may take longer than usual.
The I9000DDJG4 rom is quiet old, isn't it?
How did you flashed that with odin?
I found a link. Perhabs it helps to solve your problem.
go into download mode use odin and installa a stock ROM remember to put re-partion when you install with PIT512, CODE MODEM CSS. then go from there.
Like karo1981 said check your battery and it will take longer the frist boot.
Try JW1 stock rom it's fresh and stable
Wow! thank you all for the quick responds.
I flash with the 3 files and re-partition is checked, battery is full, ig got another SGS where i can check or charge the battery.
I know the I9000DDJG4 is older but i had to try something.
i also tried to flash the XWJPA, XENJV4, XXJP2 and XJWS7.
The problem is i got this phone while it was broken allready, but somehow there must be a way make it work.
i know the first boot will take longer, but it dont even show the S logo or somthing, it stays stucked at a screen what looks like he' s loading a video.
Already tried flashing a rom that comes with 5 files (BootLoader, CSC, PDA, Modem) and .pit file, for example I download the JVZ and came with those 5 files
joser1309 said:
Already tried flashing a rom that comes with 5 files (BootLoader, CSC, PDA, Modem) and .pit file, for example I download the JVZ and came with those 5 files
Click to expand...
Click to collapse
I only have tried flashing with 4 files (CSC PDA MODEM and the PIP) i don't know where i can find that other 5th file, and if so where should i put it in odin?
there's a little progress over here, after flashing the DDJG4 again it reboots in recovery, but its a bleu screen with only 4 options (Reboot sys now, apply update.zip, wipe data/fact.reset and wipe cash) whatever i try it will not work
on the bottom there's a error:
**
E:Can't find mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:can't mount DBDATA:
copy default media content failed
**
there is no update.zip on the sdcard, but is there a way to mount it for use ad usb device so i can coppie CWM to my phone?
find an other bootloader to flash it with odin it should be a *.tga-file. gingerbread bootloader should be fine. with this you have the "install zip from sd-card" option in your recovery.
maybe its a solution, but its a step further.
you have to flash a kernel like semaphore before flashing your rom
Generally this solve your issue
nicolas996 said:
you have to flash a kernel like semaphore before flashing your rom
Generally this solve your issue
Click to expand...
Click to collapse
first time i hear that.
normally you flash the ROM and THEN the kernel, why would you flash the other way round, makes no sence.
if you flash a ROM you overwrite the kernel-settings, because a kernel changes files in the system.
kernel -> ROM -> no effect
ROM -> Kernel -> effect
Well, the option apply update.zit is in the recovery, but there is no file update.zip on the sd card.
I tried different roms and kernels but nothing seems to work, i like know how i can flash a new bootloader maybe that will help.
Sent from my GT-I9000 using XDA App
I would like to thank everyone for all the comments and assistance, unfortunately I am not hatched and give it up.
Thanks again! This is really a top forum

Soft bricked N7000. How to?

Tried everything I could with Odin and phone still stuck in a start loop.
I was downgrading from checkROM to official firmware ZSLA2 with CWM (I wanted to keep ROOT, so I selected "Keep CF-Root kernel") due to stability issues, after restarting the phone got into the start loop.
I flashed with Odin official ZSLA2 with the same result (looped start). I flashed XXKKA (again looped start). During the flashing process, Odin says the flashing was successful. By the way, both ROMS are tar.md5 files.
I tried to remove the battery for over 30 minutes and charge it for 2 hours, tried re-partition in Odin (it's my understanding that with a stock rom, it creates a clean installation), but Odin fails to start the process.
What else can I do?
I am sorry if this has previously asked, but I've been searching for over 2 hours and nothing similar came. Somebody mentioned to use a PIT file in addition, but the other person who got his phone soft bricked didn't solve the problem either. As downloading a ROM is time consuming and I've got many problems with upload sites in china (cannot access to most of them), I would thank any help in regards this issue.
Sounds like your kernel isn't talking properly to your ROM.
A fresh start is your best bet. Flash a stock rom and kernel from Odin and reroot it with CF-Root.
What files are you putting into Odin? There should be a total of 4.
I'd also avoid the use of a .pit file. I haven't even seen the mention of one in all my time on the Note forum. I really don't think Samsung uses them the way they used to. (I used to have to flash one all the time when testing roms on the original galaxy tab.)
I am using official ROM N7000ZSLA2_N7000ZSLA2_N7000XLA4_HOME.tar.md5 into PDA and also tried ROM N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5, which I used successfully in the past to make root into my phone.
Does it really make a difference to flash 4 separate files instead of a full pack? Where can I find an official ROM with pda radio and kernel separated? Just untar the ROM?
btyork said:
I'd also avoid the use of a .pit file. I haven't even seen the mention of one in all my time on the Note forum. I really don't think Samsung uses them the way they used to. (I used to have to flash one all the time when testing roms on the original galaxy tab.)
Click to expand...
Click to collapse
Oh, they do come into the Note; I flashed the Beta ICS, and one of the things they mention is to use the PIT file for the 16GB version, instead of the 32GB that comes with the leaked ROM. Unfortunately I deleted that ROM, and donwloading it is painfully slow and also wouldn't necessarily solve my problem as I couldn't even make a phone call.
True - the .pit file can change the size of the partition data... But that's not your problem. If the .pit file was the problem - you'd boot, but have 0 storage space (or something else wonky pertaining to your disk size.)
Open the tar up and make sure it has all the files in it. Should be 5.
I've attached a screenshot of the 5 file names. Make sure they are all in the .tar you are flashing.
Even i had similar problem after flashing Stock ROM using Odin (PC). Only thing i did is just rebooted in recovery and Wipe/factory Reset and Wipe cache. everything went fine.
btyork said:
True - the .pit file can change the size of the partition data... But that's not your problem. If the .pit file was the problem - you'd boot, but have 0 storage space (or something else wonky pertaining to your disk size.)
Open the tar up and make sure it has all the files in it. Should be 5.
I've attached a screenshot of the 5 file names. Make sure they are all in the .tar you are flashing.
Click to expand...
Click to collapse
This are the files I am flashing:
Sorry, I am new user and still cannot post screen captures. I do have more than the 5 files.
In XXKKA I have:
Boot
Cache
Factoryfs
Hidden
Modem
param.lfs
Sbl
zImage
In ZSLA2:
Cache
Factoryfs
Hidden
Modem
zImage
btyork said:
Even i had similar problem after flashing Stock ROM using Odin (PC). Only thing i did is just rebooted in recovery and Wipe/factory Reset and Wipe cache. everything went fine.
Click to expand...
Click to collapse
I can only enter into Download mode, not recovery mode.
Odin is full wipe, right? What the hell am I doing wrong?
N7000xxla1_n7000oxala1_oxa
http://hotfile.com/dl/141060546/b0c7420/N7000XXLA1_N7000OXALA1_OXA.rar.html
download this firmware, it's gonna take awhile but worth a try..
try flashing this rom using PC odin.
pit: Q1_20110914_16GB.pit
pda: CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar.md5
phone: MODEM_N7000XXLA1_REV_05_CL1093393.tar.md5
csc: GT-N7000-MULTI-CSC-OXALA1.tar.md5
check re-partition, auto reboot, F. reset time.
let me know if it works!
Han
choihan06 said:
download this firmware, it's gonna take awhile but worth a try..
try flashing this rom using PC odin.
pit: Q1_20110914_16GB.pit
pda: CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar.md5
phone: MODEM_N7000XXLA1_REV_05_CL1093393.tar.md5
csc: GT-N7000-MULTI-CSC-OXALA1.tar.md5
check re-partition, auto reboot, F. reset time.
let me know if it works!
Han
Click to expand...
Click to collapse
Well, I finally managed to get my phone back. I was getting a lot of corrupted ROMS. I couldn't download your ROM as well; I managed to install the Beta ICS 4.0.3 which comes with a PIT for repartition, as I think the problem was that my booting partition was screwed.
Problem now is: that rom screws the phone and the keyboard, but at least I have my phone back.
Thank you
mrfan said:
Well, I finally managed to get my phone back. I was getting a lot of corrupted ROMS. I couldn't download your ROM as well; I managed to install the Beta ICS 4.0.3 which comes with a PIT for repartition, as I think the problem was that my booting partition was screwed.
Problem now is: that rom screws the phone and the keyboard, but at least I have my phone back.
Thank you
Click to expand...
Click to collapse
I have just recently dowloaded and installed the rom without problem. What do you mean by corrupted rom?
Sent from my GT-N7000 using xda premium
I too bricked my phone but after reading this guide (ABD wouldn't recognise my device so I couldn't follow it) I understood the partitions had become messed up.
I read somewhere about the PIT files.
I ODINed the ABYSS Kernal and PIT (Q1_20110914_16GB-patched) for my 16gb n7000 ticked the repartition box. It booted into CWM recovery and I used the restore and bingo.
Fix The problem
I had the same problem, the device got into start loop. JUST DO A FULL WIPE..! and the device should start normally. I worked for me.... :good:
Sent from my GT-N7000 using xda premium[/QUOTE]

Categories

Resources