Related
Can anyone recommend a suction cup mount that I can use in the car? It doesn't have to be made specifically for the MyTouch, I just want to be able to see the navigation while i drive instead of constantly looking down at my cup holder.
I'm in the market for one too. I would like to buy it as a christmas gift for my Boss.
doalittledanse said:
Can anyone recommend a suction cup mount that I can use in the car? It doesn't have to be made specifically for the MyTouch, I just want to be able to see the navigation while i drive instead of constantly looking down at my cup holder.
Click to expand...
Click to collapse
i third this!
I am using this one here:
http://www.amazon.com/Holder-T-Mobi..._1_3?ie=UTF8&s=wireless&qid=1259151227&sr=8-3
It gets the job done. The suction works just fine, have had no instances of it coming off, and my phone has never come out of the mount. The only thing is, be careful with the ratcheting mechanism... when I first got mine I forced it a bit hard without pressing in the release button, and now it doesn't always stay centered and skips teeth sometimes but still works.
It has an open space in the center of the bottom so you can still connect power/audio. It holds the phone well, has rubbery foam on the side arms to grip the phone. For $10 its worth it, IMHO.
Head over to your local large electronics retailer (Best Buy, Future Shop, Radio Shacketc) and look in the GPS and IPhone sections. I bet you could also order it through Amazon.
I have seen the same mount under multiple brand names there. It is around $30 in Canada, so figure $20sh in the US. The one I have is called the "Grip-iT" by Scosche. Allows the phone to be held vertically and horizontally, has a longer flexible neck to position it and a really strong suction cup mount. Also comes with an adhesive mount disk if you have to mount it that way (some places don't allow windshield mounts).
I use it mostly in a fullsized pickup with a stiff suspension and have had no problems with it coming loose.
The one I have is this one:
http://www.scosche.com/products/sfID1/337/sfID2/344/productID/1593
I would stay away from this one as it is a PITA (at least in my GMC truck, which has fairly standard air vents) to mount:
http://www.scosche.com/products/sfID1/210/sfID2/337/productID/1594
What ever you do don't buy the cheap Bell brand mp3/pda window mount kit. They are usually found in the discount stores like Wal-Mart, K-mart, etc. The clamp swivel is loose, it can't keep the phone up at a pleasant viewing angle. If you hit a good bump the phone shoots out from the poor grip and the clamp closing by the pressure of the spring. Ugh, pure garbage and a great way to get in a car accident.
Off both of what you guys found and use, are they universal?? Meaning as in, can I swap my sapphire with my g1 or other devices. I guess I should just be asking if the width is very adjustable and or can you change the angle from portrait to landscape easily?? Thanks guys. Just doing my research before I ask for one for x-mas
I have been using this one for a few weeks now.. It's actually very sturdy and becuase its made specifically for our phones, it looks sooo much better and very smooth compared to the other universal ones.
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170391719566&ssPageName=STRK:MEWNX:IT
When you order, keep in mind it's coming from china..it took around 3 weeks to receive but well worth the wait.
It's sticks to the windshield like a champ and will not budge unless you use the release tab. Highley recommended for nav pruposes.
stillriza said:
I have been using this one for a few weeks now.. It's actually very sturdy and becuase its made specifically for our phones, it looks sooo much better and very smooth compared to the other universal ones.
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170391719566&ssPageName=STRK:MEWNX:IT
When you order, keep in mind it's coming from china..it took around 3 weeks to receive but well worth the wait.
It's sticks to the windshield like a champ and will not budge unless you use the release tab. Highley recommended for nav pruposes.
Click to expand...
Click to collapse
Thanks. That one looks pretty good. Just ordered it.
Awesome find... I just ordered one too. Thanks!
Hello all,
I love my seidio innocase ii and holster combo. I am looking for a car mount that will work with the case and allow charging too. I went by VZW today and looked at their Incredible Case. As stated in the other thread you can't use any case with it. I purchased a OEM air vent car mount, but the charging socket is blocked unless you slide your phone up in the grips (the two grips have holes cut out in the middle). I don't really like this one because the release button is at the top behind the phone. Not this one, but very smiler http://tiny.cc/eahgk
I would like to find one that can turn 90 degrees with a ratcheting action that the car charger can work with.
Bright Idea
I'm thinking about cutting up an old leather belt and gluing a small loop of it on the dash so I can clip my Seidio case on it. I'll let you know how it works out.
Just kidding dbrown! I am seriously eying the universal holder from http://www.proclipusa.com/ which definitely covers the usb port but I'm picturing a hole or slot cut through the side to fix that. All the other universal stuff looks HUGE
Why go for a universal holder when they have one made specifically for the DInc? Unless you have other devices you are planning on using with this. I just don't like their mounting spots for my vehicle, too bad too =/.
DeeBG said:
Why go for a universal holder when they have one made specifically for the DInc? Unless you have other devices you are planning on using with this.
Click to expand...
Click to collapse
We're looking for a holder that will work with the phone and case. I don't want to take the phone out of my case every time I need to mount it on the dash of my car.
I just got this:
amazon.com/gp/product/B003H92LSA/ref=oss_product
But I'm not satisfied with it. Cause to the short neck, The screen is head to the top of my head, and it's not very easy to get my phone on it.
Look for a better mount, still.
i've always used this gooseneck windshield mount from verizon.
you can find it by not specifying a phone under view all mounts..
Part #WINDMNT1
19.99
it fits most all phones ever made, plus cases.....
i have my inc in it tilted so i can access the touch screen keyboard...
i got a universal one from bestbuy and it works pretty good
I have one of these on the way. http://www.clingo.com/car-mounts/universal-hands-free-mount
I think that I would like to the get TETRAX XWAY to mount my DInc. Since I'm a new member I can't post links. Sorry.
I did see a nice video review and it seems like it would work perfectly because you can leave the phone in its case.
my friend got a car dock at the vzw store, the clip part the phone goes into is actually a removable belt clip. you can remove it from the car dock completely and put it all on your belt, pocket, whatever you wanna clip it to. however, there's no case involved in that package. i'm sure seidio has a case/clip you could mod to work with a similar product as i described first.
My plan is to get the car mount from htcpedia and the innocase holster for the Surface. Then either switch out the belt clips (hopefully), or just use my dremel on the innocase holster belt-clip to cut out the same as the mount's beltclip.
A little more expensive, but seems to be the best "factory-type" option I can come with.
QSilver9300 said:
I think that I would like to the get TETRAX XWAY to mount my DInc. Since I'm a new member I can't post links. Sorry.
I did see a nice video review and it seems like it would work perfectly because you can leave the phone in its case.
Click to expand...
Click to collapse
I have one of these too, it's awesome! If you want a mount that doesn't stick on the windshield AND works with a case...this is the way to go.
Hello,
I really like the xway too, but not sure if it would work with the inocase II. The case has a ridge that runs down the length of the back of the case. I went with this..
http://bit.ly/9lOy6V. I got the sm410 and currently using the vent grip. Its a little big, but does put the dinc with arms reach if needed. And the power cord is not blocked.
try something from here
http://www.bracketron.com/
i have the air vent mount and it works great with any phone including my incredible.
Arkon Mega Grip - Give them a try.
k.electron said:
try something from here
http://www.bracketron.com/
i have the air vent mount and it works great with any phone including my incredible.
Click to expand...
Click to collapse
I have the same one, picked it up from microcenter
http://www.microcenter.com/single_product_results.phtml?product_id=0281093
works well with my innocase active. but sometimes when you secure the dinc in place the mounts grips will press the volume button. its not too hard to position it in the middle of the rocker so it wont adjust it, and it not a problem once you have it set in there.
would buy again
I've tried several different mounts and haven't been happy with any, until now. I picked up a couple of the SoundGate M2 universal docks from wiredforless.com and could not be happier. The install was simple, once mounted it looks great and folds down into almost nothing. I don't know if it's still available, but I used discount code WOOT and got two of the mounts and shipping for $14.95.
AND, it works great with the Seidio case I have.
Great product, couldn't be happier.
Teksu said:
I have the same one, picked it up from microcenter
http://www.microcenter.com/single_product_results.phtml?product_id=0281093
works well with my innocase active. but sometimes when you secure the dinc in place the mounts grips will press the volume button. its not too hard to position it in the middle of the rocker so it wont adjust it, and it not a problem once you have it set in there.
would buy again
Click to expand...
Click to collapse
i position the left clasps to the bottom and the right ones to the center.. that ensures the volume button doesnt get pressed.
mike.d said:
My plan is to get the car mount from htcpedia and the innocase holster for the Surface. Then either switch out the belt clips (hopefully), or just use my dremel on the innocase holster belt-clip to cut out the same as the mount's beltclip.
A little more expensive, but seems to be the best "factory-type" option I can come with.
Click to expand...
Click to collapse
You can switch out the belt clip on the car kit holster with the Seido clip, I've done it. Just tap out the pins in both clips, place the spring back in between the clip and the holster and tap one of the pins back in. Works like a charm. Now I'm trying to get all the audio and charging done with a modified 12 pin micro usb from the TV OUT cable.
I did reviews on these:
http://www.youtube.com/watch?v=awh6QP8-BBE
http://www.youtube.com/watch?v=e2MaD_ZOKCo
Highly recommend these and I use with my Seidio II.
Can anyone suggest a not too expensive car mount that fits the tmo HD2? the windshield kind, not the vent kind.
NOt sure..but this is the best one!
http://www.proclipusa.com/home/home.aspx?afid=42&admkt=670ca577&gclid=CKTHtJipw6QCFUNM5Qod1Wf8iw
I found a perfect mount at compusa that is made for an iphone but works great on my HD2. can send part number if needed.
Sent from my SGH-T959 using XDA App
I use the Tetrax Xway. It requires a magnet on the back of the case. I initially thought it would be annoying but I positioned it in the very middle of the phone so the phone can spin on it. I can't tell you how much enjoyment being able to spin my phone has been. With a good twirl it can spin for 2 minutes 30 seconds. I really freaked people out when Inception was big as it seemed to never stop spinning like that totem.
But the actual mount attaches to the car's AC vent which is the perfect position. The center console just seems too far away. It can be just to the right of the steering wheel.
An additional benefit is with a neodymium magnet set I got from ThinkGeek I can mount the phone anywhere that's metal. I just take four of the little cylindrical magnets and form a square with them. The phone magnet fits quite well in the divet in the middle of them. I now have a phone mount on the hood of the oven to load recipes while I cook (or watch a movie). It's quite secure, and the magnet won't hurt the phone. Just keep anything with a hard drive away like an iPod.
An interesting possibility would be to buy a cheaper clip on cover from eBay (preferably black) then buy a cheap gps mount. Then glue the case onto the mount. Then you will have an adjustable $10-15 cheap car mount
i wonder if they would make one that fits hd2 that has an otterbox case on it
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
link?
10 chars etc
I haven't seen it online yet, only in a store so far. Ill post pix later.
Sent from my ADR6300 using XDA App
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
tdiman said:
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
Click to expand...
Click to collapse
There are two versions available from the Verizon store. The one you linked to and one other. They both have one big issue. If you already have a protector for your phone that you like, it will not work unless you take your protector off. The one you linked to has one other issue, it uses double sided tape to mount. The other one I looked at had a suction mount, but as I said, it will not let you put your phone on it unless you remove any protector you are using.
the one linked is the one i'm talking about. i haven't found it on the VZW website anywhere, didn't think to look anywhere else. i don't use a case or anything full time, i ordered an otterbox for when i'm working to wear on my belt, but when i'm not i just throw the phone in my pocket and run. i wish seidio came out with a car mount like this that worked with one of their cases, that would be epic. i'm sure with a dremel tool you could make it work if you were so inclined.
I have this one
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
dltccf said:
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
Click to expand...
Click to collapse
where did it break?
i'm wondering if there's a way i can use another company's clip and case without having to remove it. thinking of getting the seidio innocase and clip or something like that, maybe just cut the little tab off of the car mount clip and using that on whatever one i end up getting.
I don't want or use the belt clip, just adds another point of movement to the system. There's no happy medium with adjustments, you either get it where you want it and tighten it down to no flexibility, or it is way too loose. Due to the way the suction cup is engineered, the act of placing the phone or removing it from the clip torques the suction, causing it to fall off all the time. Was not at all impressed.
I have this mount I just pictured. I find it reliable. I do not use the belt clip.. I always leave that on the mount.
I have never used phone cases on any of my cell phones for 12 yrs.. I only have a screen protector..
Dinc goes in my phone pocket. My designated pocket only for my phone.. Not change or car keys..
Carefull
I have one of these.. or I should say I've had 2 of these. First one broke after about 8 seconds of being up and I tried to rotate the phone, and the hing that holds the clip on snapped.
Took it back to Verizon they swapped it out... had the second one a month or so and went to remove the phone and clip from the stand... and the plastic washer that holds the clip to the mount broke.... I now have it zip tied and it works great.
I was not rough with it, its just very fragile. Otherwise a good mount.
I've had 2 and the first one broke within a week. The clip that hooks into the mount broke and wouldn't mount. The second one I had for a few days before it broke. The one the hinge went. I didn't bother trying to replace it again. They did swap it out, but if two break that quickly, I figure I'll just keep having the same problems.....
Add me to the "it's too darn fragile" camp. I ended up buying a third-party "one size fits all" type... They lie too, but it works. I just have to adjust it so the volume key isn't being squashed. (also, no cut out for camera)
2 broken clips at hinge and counting.
Same here, my clip hinge broke both times. I just have it sitting there in the car driving down the road and the phone just falls off and the hinge is broken. I think the plastic is too thin, should be a metal part, and the spring tension always on it fatigues it. Bad design.
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
angryspoon said:
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
Click to expand...
Click to collapse
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
DeeBG said:
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
Click to expand...
Click to collapse
I really recommend the Verizon one made for the incredible. all buttons and ports are accessible on the incredible
Like I said, I leave the belt clip mounted at all times, and the only protection I use for my phone is my special pocket and a screen protector.
patches152 said:
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I just bought it on a whim today and it is definitely great. Way better than the staples generic one that broke in the first 2 weeks
Wife and I both have one. Both broke right away. Replacements also broke. Always in the same place, the hinge for the clip snaps. The spring is simply way too powerful for the strength of the plastic. On the replacements I just slathered epoxy all over the hinge to make it a permanent mount. Neither one of us were using it for anything other than the car dock, but the thing just breaks like a cheap wine glass.
So in my experience they were 4/4 for breaking within 3 weeks. It's a great dock, but you just have to expect it to break unless you do what I did and glue the living crap out of it.
ive had my verizon mount for about 2 weeks now, my only complaint is that it has a removable belt clip. Ive tried different locations around my windshield and since I play with it so much, the clip has wiggled loose a time or two. other than that, its been better than any mounts ive tried to hack together for it.
TL;DR good mount, bit pricey
Can you guys post any highly rated car docks for this phone, im going to get in a ****en accident one of these days using my google nav.
thanks...best friends
I've ordered one of these http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150533595603&ssPageName=ADME:B:EOIBSA:GB:1123
As soon as it turns up (ship to UK) i'll post a review.
i'm still using the same Generic Universal Car Dock since my HTC Athena times, until now
mine is Air Vent mounted, which is more secure
all the air suction for the windshield are not always working, over time it hardens and doesn't work anymore
lots of good choices from DealExtreme
I use this one that I posted in another car dock thread.
http://forum.xda-developers.com/showpost.php?p=10196993&postcount=11
BruceCLin said:
I use this one that I posted in another car dock thread.
http://forum.xda-developers.com/showpost.php?p=10196993&postcount=11
Click to expand...
Click to collapse
I almost bought that one, but I didn't like how it didn't have anything holding the Nexus S from the side. And I don't like windshield mounts. (Yes, I know it had a dashboard mount but I'll get to that in a second).
I ended up buying: http://tinyurl.com/63eh7wh
The windshield mount worked fine, has a little lever to push to generate suction and the hold is very strong. However, like I mentioned before, I don't like windshield mounts. Next step was to try the dashboard. Now, I don't know if it's because of the way my dashboard is shaped(curved, ratherthan flat) but the little stickypad thing never stuck. I ended up giving up on and settling for the air vent mount which works fantastic! Looks great, nothing obstructing my view, and the hold is almost as strong as the windshield. I'm very pleased.
On this mount, the USB port is not obstructed but the headphone point is. The bottom "legs" are also not adjustable.
Carmount
I just bought one of these from CarphoneWarehouse. It is a suction windscreen mount with an extra dashboard pad (plus double sided sticky pad) which I didnt use. The suction mount is pretty good. The extension that comes with it is too wobly though !
http://www.amazon.co.uk/Griffin-Win...XYJY/ref=sr_1_1?ie=UTF8&qid=1295539220&sr=8-1
The Google Nexus S fits nicely........
Just took delivery of one of these today, fit and build quality is excellent. Been using Brodit for years, to me nothing comes close.
Sorry.... as I'm new I can't post a link however Mobilefun in the UK do Brodit and had the passive holder in yesterday - sold out already I see.
Google (from UK) Brodit Nexus S and you should be able to get it from there.
Also maybe try DSL developments, I think they are the UK Importer.
dgjlee said:
I've ordered one of these http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150533595603&ssPageName=ADME:B:EOIBSA:GB:1123
As soon as it turns up (ship to UK) i'll post a review.
Click to expand...
Click to collapse
Looks interesting, I will be curious of your review of this, and its stability.
BruceCLin said:
I use this one that I posted in another car dock thread.
http://forum.xda-developers.com/showpost.php?p=10196993&postcount=11
Click to expand...
Click to collapse
I am also using this Arkon mount that BruceCLin recommended (thanks!) in landscape mode on my windshield. The mount is pretty sturdy with very little movement during driving. It has a very tight spring that keeps the phone clamped securely in place. This is temporary until ProClip comes out with a holder for the Nexus S.
unremarked said:
I almost bought that one, but I didn't like how it didn't have anything holding the Nexus S from the side. And I don't like windshield mounts. (Yes, I know it had a dashboard mount but I'll get to that in a second).
I ended up buying: http://tinyurl.com/63eh7wh
The windshield mount worked fine, has a little lever to push to generate suction and the hold is very strong. However, like I mentioned before, I don't like windshield mounts. Next step was to try the dashboard. Now, I don't know if it's because of the way my dashboard is shaped(curved, ratherthan flat) but the little stickypad thing never stuck. I ended up giving up on and settling for the air vent mount which works fantastic! Looks great, nothing obstructing my view, and the hold is almost as strong as the windshield. I'm very pleased.
On this mount, the USB port is not obstructed but the headphone point is. The bottom "legs" are also not adjustable.
Click to expand...
Click to collapse
The most sticky part of the dashboard part is in the middle. I have an '08 Civic and almost the whole dashboard is somewhat curved. I found a spot where it's flat, but the dashboard part doesn't cover all of it, just enough where all the stickiness in the center sticks to it and stays tight.
As for the legs, it is adjustable. I bought that exact same one you linked and got it today. You need to use some force to take those legs off or adjust it. I just took mine off since it was annoying to due where the ports were located.
Bmerz said:
Looks interesting, I will be curious of your review of this, and its stability.
Click to expand...
Click to collapse
Should turn up any day now. Hope it was worth the wait!
Do any of these car docks swivel from vertical to horizontal??