Just got my CLIP case/stand... - G Tablet Themes and Apps

It's SWEET! Only downside for me is i'm left handed, and if I hold it open while walking the flap is on the left so its kinda hard to use. I can flip it around but then it opens backwards and the buttons on the bezel are upside down. gonna see how it goes and maybe do that

Related

Loose Charging Cover

I've had the g1 since launch and the charging cover is starting to get loose. The clip on the left side of the cover doesn't stay closed anymore and always hangs out halfway.
Just wondering if anyone has the same problem and found a fix.
Fix
OK, so I played around a little bit and realized that the clips on the left and right of the mini usb cover are not really used to keep the cover in place.
To tighten up the cover again I used 3 pieces of scotch tape, layered on top of each other, on the long side of the hexagon shape of the mini usb. Make sure the tape is on there well and wont come off too easily. It has worked so far for me, but don't know how long it will last.
If anyone has any other suggestions, it would be appreciated.
I've been contemplating taking mine off.
I took mine off. No need to open a flap to charge now
Had no probs whatsoever since

Stylus for the HD2

I recently purchased for the princely sum of £5 a stylus - aimed at the iPhone made by Exspect..
Now they are a few styli out there that just don't work but this one is weird..
The end is like rubber and all spongy and it works just fine when you press (though I wish the end was more pointed) but it won't scroll via the rubber end cap but, and this is weird, to get it to scroll from left to right, you place the stylus on the screen vertically (holding the clip) and move it from left to right and hey-presto it scrolls a screen at a time and if you turn it around it scrolls from top to bottom.. all this and it is not physically touching or scratching the screen..
So how have they done that as there are no magnets (that I can see) in the stylus, no user or moveable parts.. but it works.. strange but I am curious as to if the official HTC stylus that is currently being advertised at £17 is the same or any better..

Easier way to remove the battery cover?

Removing the battery cover on the Nexus is rather irritating, is there a specific way YOU remove it, I know its simply sliding it up - but I'm still having troubles.
Heh. Knew I wouldn't be the only one having problems with it.
I posted a thread about this some time ago. This was the method that worked for me:
nDrg said:
Try this, hold your phone in your left hand facing down with your index finger and thumb just on the sides of the phone just above the capacitive buttons. Then place the ball of your right palm on the back of the cover and push up while applying a little force, it should open pretty easily.
Click to expand...
Click to collapse
I find it easiest to hold it so the top of the phone is facing away from you, face down. hold it so your fingers are on the screen side, kind of going down the length of the screen on each side and place your thumbs about 1/2" in from the edge, just above the split.. on the half that slides off.
Now... counter intuitively... press your thumbs down into the phone with a little bit of forward motion too (the direction it slides). If you have your thumbs in the right places, you'll easily defeat the hooks that hold the case together and it'll pop right open.
@grainysand the palm method also works pretty well too, but I still tend to need at least 2-3 tries removing it that way. it's rare that I can't get the shell apart my first try using the thumb tactic.
good luck! it must have been pretty hilarious watching me get the thing apart the first couple times i tried.
??? Hmmmm... ....Hold it in your left hand with screen facing down...put left thumb on bottom of cover...right thumb just below the camera lense cover...Right index finger on top of the phone...making sure you're not holding the cover down with it...and push up with both thumbs.
Eclair~ said:
Removing the battery cover on the Nexus is rather irritating, is there a specific way YOU remove it, I know its simply sliding it up - but I'm still having troubles.
Click to expand...
Click to collapse
well your parents bought it for you, ask them!!
mikebeatrice said:
I find it easiest to hold it so the top of the phone is facing away from you, face down. hold it so your fingers are on the screen side, kind of going down the length of the screen on each side and place your thumbs about 1/2" in from the edge, just above the split.. on the half that slides off.
Now... counter intuitively... press your thumbs down into the phone with a little bit of forward motion too (the direction it slides). If you have your thumbs in the right places, you'll easily defeat the hooks that hold the case together and it'll pop right open.
@grainysand the palm method also works pretty well too, but I still tend to need at least 2-3 tries removing it that way. it's rare that I can't get the shell apart my first try using the thumb tactic.
good luck! it must have been pretty hilarious watching me get the thing apart the first couple times i tried.
Click to expand...
Click to collapse
very descriptive this is the way i've done it the whole 3 times i have opened it.

Anyone else hitting the middle button sometimes when they bend their hand?

Doesn't matter on the placement too much as sometimes my watch will reset because I bent my hand and it hit and held the middle button causing it restart. Is there something I can fill in the space with to stop the button from pushing down? Maybe a very tiny elastic band?
Or you can wear it on your right hand?
Go to a watch shop, most new watches come with the crown held out with a small plastic disc. Maybe one of these might fit.
re: middle button
worldsoutro said:
Doesn't matter on the placement too much as sometimes my watch will reset because I bent my hand and it hit and held the middle button causing it restart. Is there something I can fill in the space with to stop the button from pushing down? Maybe a very tiny elastic band?
Click to expand...
Click to collapse
You must be double jointed or something, I tried to bend my wrist a half a
dozen times as hard as I could and even slid the watch as close as I could
to my wrist trying to intentionally press the button but I could not do it.
Good luck!
Have a great day!
I have done it twice in a week.
Happens to me all the time, also beware the button is easily broken as I have learnt. The watch fell while putting it on and landed on the button and it no longer works
harlin73 said:
Or you can wear it on your right hand?
Click to expand...
Click to collapse
Happens to me Several Times a Day,, many times it will reboot,, if i try to attach my watch higher than the wrist bones my shirt or jacket will cover the watch face and i will have to use my other hand to expose the face,, very annoying when all you want to do is Glance at the Watch face for the time or messages that just came through,,, By the Way Switching to my Right Hand Does Solve the Issue of Accidentally Pressing the Button But Very Annoying and Makes it Extremely difficult to press the Buttons with my left hand
This was one of the most frustrating things I ran into with my ZW3, as it happened all the time. However, there is a fairly easy solution. Flip it around so that the buttons are on the opposite side, then run Set Orientation to force the screen to match. Problem solved.
If you are comfy setting up your phone as an ADB bridge, you can upload the APK on the fly. Otherwise, you will need to plug it into a PC and upload over ADB the ordinary way. However, getting the Set Orientation app on the watch is the hardest part of the whole deal.

Is your phone flat?

I use my x4 since october and today I discovered it isn't 100% flat. When I put the phone screen down on the table I can fell little moves on opposite corners. I carry my phone in the front pocket and try not to make any pressure on it. I do not overheat my phone either. I can not see any bent on sides, it looks fine. Anyone having this issue too?
I haven't taken my phone out of the box yet but it could be from the camera 'bump' in the middle.
dougo007 said:
I haven't taken my phone out of the box yet but it could be from the camera 'bump' in the middle.
Click to expand...
Click to collapse
"Flat" laying on screen. When you put your phone screen down and can't feel any moves, phone doesn't "swing" when you press any of its corners.

Categories

Resources