Ok guys, clearly I'm new to all this. I've only had my Galaxy S (I9000m Bell) for 3 days now and already managed to brick it.
So here's what happened, I wanted to flash CM7, what I did was rooted obviously, I unlocked since I'm with Rogers and the phone is from Bell. Installed Rom manager, titanium back, Terminal emulator, Astro, etc. So I'm pretty sure I have the required tools. I also flashed SpeedMod Froyo [K13D HPCall VoodooSnd4 SharpnessFix STABLE].
Alright so I noticed I couldn't boot into recovery from CWM even though I flashed it using Rom Manager, I tried fixing this for a while with no luck. I then came upon a thread discussing the 3 button combo fix for download mode. I wanted to get this done just in case what happened happened lol
So anyways, I couldn't find instructions for Mac so I tried putting the pieces together using terminal and Heimdall.
The last thing that happened to my phone was that I was able to get into download mode using adb reboot recovery.
However continuing to the next step to apply the fix wouldn't work for me using heimdall, it would just fail.
Being the idiot that I am I decided to exit in terminal, closed heimdall, turned off the phone and turned it back on and guess what...yup I'm screwed. It's bricked.
Now the problem is I don't have 3 button fix, so I can't get into download mode (even if i did, i wouldn't know what to do).
I read about the jig fix but I don't know if i have any other options, hopefully something faster that I can do myself instead of buying the jig and having to wait for it to **** from ebay.
Sorrry for the longgg post and hope anyone here can help me! Thanks
PS. I tried using terminal again to get to download mode like i did the first time (adb reboot recovery) and it didn't work...it said no device found or something like that
Hi It seems your only option short of looking for a repair shop or sending phone to Samsung is to try the JIG. If you don't know how to approach this print any of the diagrams or guidelines e.g. look here.
What you can do is go to electronics part shop and ask for help with the jig ask the man to wire the resistors to the pins in usb plug just to see if the phone kick starts if not, well you're screwed.
If it works just buy it if not, google for repair shop with Riff Box and JTAG adapter for I9000 it takes about half a bell to do it (repair I mean). But if it's new you have to return it in for repair.
I guess you should get the jig one way or another, either visit electronics parts shop, ebay-it
hope this'll help somewhat.
cheers
If you're in the vancouver area, you can swing by and use the jig I made
Thank you both for the feed back.
@Tony I'm actually in Ottawa. I found someone on Kjiji that also made his own but wants to charge $10 and he lives too far away so I just went ahead and ordered one off ebay for $9 with shipping.
I read on the xda thread regarding the JIG that it the phone doesn't boot at all and just shows a black screen with the bricked image (as opposed to loading the carrier name or samsung with a white screen before) that it won't work and that is my case. Anyways I hope it works, just gotta wait and see I guess. I just don't even know what the next step would be. What do I do once I'm in download mode? :S
EDIT: NVM about the whole white screen, black screen thing, it says that the JIG should work if I see the PC-Phone logo which I do.
Three days huh? Wow, when you do it, you really DO it. Reading your description it sounded a bit like a Med student doing a brain transplant.
First I would just take the phone back to your carrier or service center and say you have no idea what happened, pay the money and have them sort it out. I fear there is no easy way out of the hole you have dug.
Next you should spend a few hours reading as much as you can here and then start small. Ask questions before you do anything. Root the phone. Try a few different kernels and lagfixes. Maybe flash something from doc's kitchen or a custom ROM. Make sure you know in advance what could go wrong and how to handle it, as much as possible. Once you have some experience then try something like cm7, which is very much a beta on the sgs and quite complex to flash and set up.
Spend a little time walking before you run (no matter how much you think you know) ...you'll enjoy the trip more.
Sent from my GT-I9000 using XDA Premium App
rschenck said:
Three days huh? Wow, when you do it, you really DO it. Reading your description it sounded a bit like a Med student doing a brain transplant.
First I would just take the phone back to your carrier or service center and say you have no idea what happened, pay the money and have them sort it out. I fear there is no easy way out of the hole you have dug.
Next you should spend a few hours reading as much as you can here and then start small. Root the phone. Try a few different kernels and lagfixes. Maybe flash something from doc's kitchen or a custom ROM. Once you have some experience then try something like cm7, which is very much a beta on the sgs and quite complex to flash and set up.
Spend a little time walking before you run (no matter how much you think you know) ...you'll enjoy the trip more.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Haha I can't take it back to the carrier, I bought it off kijiji, it's from Bell and I'm with Rogers. I unlocked it and as far as I know Bell is really bad with their warranty and last time I bought a Blackberry that was locked to Bell and unlocked it I was told by Bell that I need a receipt, which I obviously don't have. I would rather throw the phone away and buy a new one than have to deal with carriers.
I'm just gonna try the JIG I guess since I already ordered it. Hopefully doesn't take too long to get here.
And yes, I definitely need to read more and follow the instructions on a Windows PC instead of trying to put bits and pieces together and try to get everything working on Mac.
It seems however that the more I read the more I get confused, is it just me or are there so many different ways to achieving the same thing?
Anyways, I bought this as my first Android to experiment and learn on and so far that's what I've been doing. I'm not afraid of running into problems, I'll try to enjoy fixing them
mike1089 said:
Haha I can't take it back to the carrier, I bought it off kijiji, it's from Bell and I'm with Rogers. I unlocked it and as far as I know Bell is really bad with their warranty and last time I bought a Blackberry that was locked to Bell and unlocked it I was told by Bell that I need a receipt, which I obviously don't have. I would rather throw the phone away and buy a new one than have to deal with carriers.
I'm just gonna try the JIG I guess since I already ordered it. Hopefully doesn't take too long to get here.
And yes, I definitely need to read more and follow the instructions on a Windows PC instead of trying to put bits and pieces together and try to get everything working on Mac.
It seems however that the more I read the more I get confused, is it just me or are there so many different ways to achieving the same thing?
Anyways, I bought this as my first Android to experiment and learn on and so far that's what I've been doing. I'm not afraid of running into problems, I'll try to enjoy fixing them
Click to expand...
Click to collapse
You are right that there are different approaches to doing the same thing...often it is just a matter of what works for you.
Once you have a jig you will have no trouble going in to download mode. From there anything is fixable using odin. I would suggest reading the thread about darky's resurrection ROM which is a good place to start from when you have had trouble.
Just remember to do your homework and enjoy the process.
Good luck.
Sent from my GT-I9000 using XDA Premium App
rschenck said:
You are right that there are different approaches to doing the same thing...often it is just a matter of what works for you.
Once you have a jig you will have no trouble going in to download mode. From there anything is fixable using odin. I would suggest reading the thread about darky's resurrection ROM which is a good place to start from when you have had trouble.
Just remember to do your homework and enjoy the process.
Good luck.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sounds good, will definitely keep that in mind. Thank you for your help, very much appreciated.
Hey guysss!
I just wanted to let you all know that I am a biggg IDIOT! LOL
So I ordered the JIG from ebay and on my way home I went to a couple of electronic stores to try and buy those resistors because I wanted to make my own JIG as well. Anyways, all the stores were closed and my friend told me he can grab the resistors from his lab tomorrow (engineering students lol)
I obviously don't want to wait till tomorrow. I came home and decided to take out the phone from its box again. This time I did the 3-button combo but in a different way, not using volume UP + DOWN + power but I came across a Samsung PDF explaining the Anyway JIG and it showed to press Volume Down + Home button + Power.
I gave that a try and voilà!!! I'm back in download mode! YAYYY!
I'm afraid to turn it off or pull the battery out cuz I don't want to risk ruining it even more so I'm gonna go ahead with rschenck's suggestion and use Darky's Resurrection Rom!
Thank you all for your help!!
Uh oh...one last problem
So as of now I am able to access Download Mode but not Recovery:S
Any ideas?
mike1089 said:
Uh oh...one last problem
So as of now I am able to access Download Mode but not Recovery:S
Any ideas?
Click to expand...
Click to collapse
If you can get to download mode you are fine for the moment since that is what you need for odin. Follow one of the guides for using odin here at XDA exactly, and good luck.
Sent from my GT-I9000 using XDA Premium App
Ok so after download mode, I followed the steps to reflash stock, i downloaded the same JL2 that I had prior. Odin said passed but the phone wouldn't boot, it would just get stuck on S in the boot screen...
I did a complete wipe data/cache through recovery and that didnt help.
I then thought I would give Darky's Resurrection a try since it wipes everything anyways...odin again said PASSED but there was a sign of a circle on the screen and it didn't boot. I did it again, said passed again and this time im on a endless boot loop. It turns on says samsung i9000, etc. and then blinks and does it again.
I am still able to get into download mode. I just don't know what to do anymore
Download mode = Yes
Then download stock firmware from samsungfirmwares.com not 2.3.3
or from link
http://forum.xda-developers.com/showthread.php?t=846913
Download ODIN
Flash stock firmware through Odin with pit 512 and repartition checked .
If that fails try Eclair firmware 2.1
jje
JJEgan said:
Download mode = Yes
Then download stock firmware from samsungfirmwares.com not 2.3.3
or from link
http://forum.xda-developers.com/showthread.php?t=846913
Download ODIN
Flash stock firmware through Odin with pit 512 and repartition checked .
If that fails try Eclair firmware 2.1
jje
Click to expand...
Click to collapse
Ok so I did the above instructions and I the same happened. I am on JL2 now but it wont pass the boot screen (Stuck on the S). I did check repartition and 512 pit and pda.
I also have this error:
Can't mount DBDATA: copy default media content failed
My question is if I try eclair will I lose 3 button fix? From what I was able to gather the 3 button fix for Bell I9000M only came out with JL2.
Will I lose it or is it permanent once I have it?
Related
Hey there, i am feeling somewhat overwhelmed with all of the advice going on out there and need someone who can give me the answer to my specific problem hardware wise without breaking a sweat...
I flashed a froyo 2.2 rom onto my phone a while ago, recently all of my apps stopped working, and i could no longer install any apps.
Couple days ago i tried openning gmail and the screen went black and gave me the bzzzzzz...............................bzzz...bzzz...
vibrating error that you usually get when an app crashes.
Now the phone continues doing that even when booted up and stuff
It starts right after the S screen and repeats until the battery is removed.
My phone can't get into download or reset mode using the 3 button method so i bought a jig off of ebay, works like a charm.
however NOW, i cannot get the computer to see the phone; both when it is on and attached and in download mode and attached. Odin can't see it, neither can Kies.
If i can get either to see it, i can look up the flashing process to make sure everything is right.... but as of yet nothing i am doing is making a difference.
Thanks for any help
Ok, I'd focus on odin so disable Kies (in task manager processes - all the kies processes).
Then I would 1) reinstall the drivers (standalone ones) 2) Have a few versions of odin to try (like 1.3, 1.7 and ez odin) 3) Clean your usb port on the phone (and computer maybe too - whats the harm?).
Usually if you are sure the drivers are Ok then you should be able to odin working with a nice clean port. They are more sensitive to dirt/moisture or whatever than they should be.
Try that and let us know...
BTW Some people think that the order is important but I've never noticed that. I always have odin open and then connect it but cant hurt to try the other way around too.
Hey thanks alot,
I am at work right now but i am optimistic about trying that out lol.
Just so i know for when the time comes and if Odin works, what files do i need to flash it? .pit, .tar and anything else specific for Bell Canada?
I only ask because you are with Bell so it is probably a very simple answer for you. Otherwise I am sure i can find it elsewhere.
Thanks,
I'll keep you updated
Josh
Download the complete jl2 rom from link I posted yesterday (search my posts) with repartition ticked, then flash the kc1 rom from stock rom link on xda or at samfirmware.com and flash without repartition if you want the latest. You could just try the kc1 step but I you need to repartition.
Sent from my GT-I9000M using XDA Premium App
Hey man,
my phone has never been sent in for repairs or replaced...
I was reading one of your other posts and you advised another member to send it in and maybe they will replace/update hardware?
I have still had my phone for less than a year so sending it in will be no problem at all...
Should i flash to the latest myself or return to stock and send it in?
I really appreciate your help.
Thanks
Well he knows his is broken as he can see that his internal memory reads 0 (which means its cooked - ask me how I know...) and he was trying to fix it in a round about way. Or there was the guy who flashed a captivate rom - that was just a big no-no.
You might just have a corrupt partition or some other corruption in the file system. I seem to get that all the time and its a pain but very fixable .
Alright, sooo
-uninstall Kies
-install drivers only
-try to connect to Odin
-If succesful flash with Odin
-dance with joy
Got it, I will update you later when i get home.
Thanks
installed drivers on my work computer (32 bit windows xp) and nothing... I've tried phone off, phone on, phone in d/l mode... It doesn't pick up anything...
I can try it on my Windows 7 comp at home and see if that works but i'm wondering what the worst case scenario is just bringing into Bell and having them fix it... Am i looking at charges, warranty voiding, etc.. etc... to have it fixed or could i BS my way out of it?
Fuuuuuuuuuuuuuuuuuu
pretty sure i flashed the wrong firmware on my phone, when it boots up it says GT-I9000 not GT-I9000M.
It worked fine for like 6 months so i never questioned it... damn damn damn
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
I9000 firmware is completely compatible. The text you see is from the kernel which are always for i9000 unless you have one of the three bell firmwares. So that's not the issue.
Sent from my GT-I9000M using XDA Premium App
RogueCow27 said:
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
Click to expand...
Click to collapse
I would keep trying. I have gotten warranty before and I was in the same predicament as you almost except I knew that the internal memory was dead. But that was also around the time when most of the I9000M models were dying. They might be checking more now.
If you get odin to flash a stock rom then you can go for it but by then you should be able to fix it.
Sent from my GT-I9000M using XDA Premium App
Alright i will keep trying.
As far as the firmware goes, my gf and i both have the same phone, but she kept heres official and i put custom roms on mine (just the 2.2 because it wasn't available)
We are both on bell canada so i asked her to boot up her phone and the beginning message on hers says GT-I9000M so it freaked me out lol
I will try on my home computer,
keep your fingers crossed for me
Alright, so Odin can now see my phone (it was the damn cord, my Win 7 comp couldnt see it but my xp work laptop can)
Which firmware would you recomend flashing? Stock gingerbread or a slight variation?
I am at work right now so i can wait a bit for a good response. It'd really help me out if you could provide links and tips to the best firmware out right now (i have no problem flashing a custom ROM if it is good).
Thanks alot,
Josh
Succesfully Flashes Gingerbread 2.3.4
Thanks for all your help!!!
how did you manage to see it in odin?
i have te same problem with restarting just after first screen (after flashing to gingerbread) but i cant see it in odin so i cant flash it again?
when i connect it when turned off, a small icon appears with usb connected sound but its still not visible.
Is it maybe my win7?
help, anyone please
Did you start in Download mod? Did you kill the Kies processes in you Win7 task manager ?
If yes, sometimes Windows takes time to install the drivers (be sure ton be connected to the internet), you should also close and relaunch Odin.
i launched download mode with sdk, and now i cant start it.
i went to another pc with xp. it installs drivers but odin cant recognize it.
Well i did it on my work XP computer becuase WIN 7 wasn't recognizing it. But it turns out the whole time the cable i was using would connect to charge, but not act as a pc connection.
Ok I have a stock KB2 Cappy. I used Odin to flash back to 2.1 KB1 JF6
Then I used Odin 3 to flash a kernel so I can put on CM7. I am now stuck in the Boot screen.
I have no 3 button, I cannot get into download mode (my jig is homemade should i order one?)
I tried to change usb and remove the sim card to try odin again to get back into stock.
Nothing seems to work the only thing is my jig is not good either for DL Mode. I want to get back to stock so any suggestions. I tried heimandall did not work either.
I am really stuck on this galaxy s I897 screen.
Is the jig soldered? If its not make sure you are connecting the correct pins and use some black tape or something to isolate your fingers from the resistors (might screw up the actual ohms making it to boot up normally and not in to dl mode.
The bootloop was expected, you are supposed to check that you have a working button combo both before you flash the kernel (because it will bootloop and you boot into recovery and flash whatever) and before you ever flash cm7 because that is the only way to get into download mode besides a jig on aosp roms.
so, fiddle around with your jig some more and if you get it in download mode just flash the captivate gingerbread bootloaders, that will fix your button combo and allow you to proceed flashing cm7.
Hi Guys,
I have a similar problem. I am a total noob-I've had my I896 cappy (Canadian Rogers based) for about a year now; i fiddled with it on Saturday and also got the bootloop. I freaked out, and managed to further flash (out of frustration and confusion) the cappy with another wrong ROM, the I900. I managed to get it back into DL mode and tried flashing stock eclair or 2.2 froyo via ODIN. For some reason, whenever I start the flash (press start on Odin with the froyo 2.2 file on PDA), the progress fails at the factory section. I don't know much about jigs yet, but any tips would be greatly appreciated.
thanks
Chord in the back of the PC directly attached to the motherboard NO EXTERNAL HUBS, right click on Odin run as admin.
Once you have it working READ AND UNDERSTAND WHAT YOU'RE DOING, BEFORE DOING ANYTHING ELSE TO YOUR PHONE
This is probably the easiest guide on how to make one. Layman Jig First one I did I butchered a pare car charger to make it. You can just grab one from MobileTechVideos.com for about $8.
AlphaJ1 said:
Hi Guys,
I have a similar problem. I am a total noob-I've had my I896 cappy (Canadian Rogers based) for about a year now; i fiddled with it on Saturday and also got the bootloop. I freaked out, and managed to further flash (out of frustration and confusion) the cappy with another wrong ROM, the I900. I managed to get it back into DL mode and tried flashing stock eclair or 2.2 froyo via ODIN. For some reason, whenever I start the flash (press start on Odin with the froyo 2.2 file on PDA), the progress fails at the factory section. I don't know much about jigs yet, but any tips would be greatly appreciated.
thanks
Click to expand...
Click to collapse
Hi guys,
Thanks for the link.
From what I understand, a jig is an improvised connection that allows your phone to go into DL mode. What if my phone is still capable of going into DL mode? My apologies, as I am at work.
Im not sure what you mean with your question. What the jig does is give the signal for it to go to download mode as was intended by samsung. Same theory on how your phone knows its connected to your computer, or the wall or the car charger. Its by manipulating the current between 2 pins. Keep in mind your phone should always be capable of going in to download mode assuming the hardware is working and your bootloaders are in working order.
I believe I read it on a different website that as long as your phone can go into download mode, then it is only "soft-bricked," meaning it can still be recovered using ODIN. I don't know If I was misinformed or not. I guess my question is, since my phone is still able to go into download mode, but the flash is still failing, did I DL the wrong ROM, or was the copy of Froyo 2.2 I DL'd corrupt? If so, is there a reliable source/site where I can download Froyo or Eclair?
I hope that makes more sense.
Read my post after yours...
studacris said:
Chord in the back of the PC directly attached to the motherboard NO EXTERNAL HUBS, right click on Odin run as admin.
Once you have it working READ AND UNDERSTAND WHAT YOU'RE DOING, BEFORE DOING ANYTHING ELSE TO YOUR PHONE
Click to expand...
Click to collapse
^What he said. If that fails could be a faulty cable.
AlphaJ1 said:
I believe I read it on a different website that as long as your phone can go into download mode, then it is only "soft-bricked," meaning it can still be recovered using ODIN. I don't know If I was misinformed or not. I guess my question is, since my phone is still able to go into download mode, but the flash is still failing, did I DL the wrong ROM, or was the copy of Froyo 2.2 I DL'd corrupt? If so, is there a reliable source/site where I can download Froyo or Eclair?
I hope that makes more sense.
Click to expand...
Click to collapse
You are correct, if you can get into download mode you are not bricked. Make sure you are using the usb cord that came with your phone, plugged directly into the back of your computer. Make sure your SIM card is out, you're logged in as an administrator, and that you start odin before you plug your phone in.
If it still doesn't work, try another computer and/or another cord.
Why do people say take sim out? Ive never taken it out and had no issues. Just curious.
That is a practice from way back in the winmo days, sometimes the flash would corrupt the Sim itself. Not the case anymore for the most part. I'm with you never take mine out either.
Thanks guys, I will try this at home; hopefully it works.
prbassplayer said:
Why do people say take sim out? Ive never taken it out and had no issues. Just curious.
Click to expand...
Click to collapse
I say it because, while I've never had it screw up the SIM itself, I had a situation where I forgot to remove it and then couldn't get odin to complete a flash on several attempts, resulting in a soft brick that I couldn't flash out of. As soon as I removed the sim, Odin flashed without an issue.
Coincidence? Maybe, although I didn't change anything else. If it possibly keeps me from repeating this terrifying event, though, I'll just keep doing it
apbthe3 said:
I say it because, while I've never had it screw up the SIM itself, I had a situation where I forgot to remove it and then couldn't get odin to complete a flash on several attempts, resulting in a soft brick that I couldn't flash out of. As soon as I removed the sim, Odin flashed without an issue.
Coincidence? Maybe, although I didn't change anything else. If it possibly keeps me from repeating this terrifying event, though, I'll just keep doing it
Click to expand...
Click to collapse
Did you get a red "FAIL" message on ODIN? Because thats what I got several times. My buddy also tried and he got the same thing. The green progress bar completes up till about 80 percent and gives up on me. I'll try taking out the SD and SIM cards when I get home, hopefully it works.
Hi guys, little update:
I found this on the forums and used it:
http://forum.xda-developers.com/showthread.php?t=731989
Anyways, this worked after my second try. Interestingly enough, it worked once i removed the Sim card, which is what apbthe3 suggested..great! I'm just glad my phone is no longer bricked. Minor issue though, my phone is now an AT&T phone, but unfortunately, I am a Canadian Samsung user. New problem now. My phone is no longer rooted (never was actually, but was bricked in the process), I'm happy it works, but i need to know if there are any Canadians out there that know how to revert my device back to Rogers.
Any help would be great. Anyways, the link I provided works great, so its a great resource for our American friends.
Why don't you look at Cognition 4.x.x? Froyo stock ish looking rom tweaked out the ass very fast. Good rom.
Look in development. There are a couple of threads there just for Rogers users.
I superonelick rooted. Then i downloaded ROM Manager and flashed CWM. Then i returned to stock using ODIN 1 click. It failed.
Now when i turn phone on it just shows a white screen and nothing else happens... i can't find problem anywhere else on google. I've rooted many captivates but never had this problem! UH-OH... Help please
the same thing happens whenever i try to boot into recovery and into download mode...
You are gonna need a JIG. Check mobiletechvideos.com to get one or u could make one urself.--see this for homemade jig... [HOWTO] *Layman's iGo Jig* [Solderless]
Which One Click Odin did u use ??
i used I897UCKH3_withBL
i used it the night before and did the exact same procedure with no fault... i didn't do anything differently...
If u can't get into download mode by pulling battery/ replacing battery and connecting the micro usb to the phone, having already connected the usb end to the computer... then u r gonna need a jig.
And a friendly fyi, once u flash Gingerbread firmware that contains the Bootloaders, there is no need to flash a firmware that contains GB Bootloaders again if u are flashing another or the same Gingerbread firmware... or even going back to Froyo or Eclair for that matter, because the GB Bootloaders are backwards compatible.
i pull the battery. press both volume buttons, plug in usb chord to phone (already plugged into computer) then put in battery. The phone screen turns on (all white, blank screen)
I've seriously done this with 5 captivates... i've never had ANY issue... and now this happens. I'm so confused.
Do u remember or can u still see on the Odin where it failed ?
Either way though, u r gonna need a jig.
But on the plus side, it is not hard bricked.
Yeah i just did it out of order... ugh...
well this sucks, cuz it's someone elses phone and it's 9pm on a sunday night... I don't know what to tell him, lol.
Once u get or make a jig, then just flash the KH3 that contains NO Bootloaders 1st, that is, if that is still the base u want to take the phone to. This should get the phone working, if the Odin failed after it had already installed the GB Bootloaders.
good grief... i still can't believe this has happened... I guess i'll just give him my phone to use... i'm never helping anyone else again with their phone. I don't want to be responsible for this crap.
Can i just take his phone to AT&T store and get a new one (it is only 2 months old)
i mean are there any other ways to try and get the phone to do SOMETHING? I mean it turns on....
Jig is ur answer.
If it turns on still its fixable if you tried download mode and the screen is all white does odin still see the phone??
Sent from my I897 using XDA App
odin does not see the phone.
As others have mentioned jig is your only option at this point, but easily fixed none the less
Sent from my I897 using XDA App
okay well i just bought one. I'm really short on time to make one this week. So it'll be here tomorrow or wednesday.
what are the actual instructions once the jig comes in? I just plug it in and it goes into download mode? Then hook it up to computer and ODIN. (which odin do you recommend for cognition, or do you recommend another OS? )
Search, man, search.there are dozens of threads that answer this, and all the questions you've had.
You may also want to try one of the heimdall one-clicks, especially if ODIN isn't working for you.
i appreciate that. I just wanted the opinions of forum members that i respect. (i know there are a lot out there who are worthy of it as well.) So i figured while i had one's attention, i would ask
There is nothing wrong with asking questions, but you can learn more by searching for one answer than asking 10 questions.
Hello, i have a huge problem with a galaxy captivate. Neighbor brought me that phone to flash it because it was acting funny. I tried to use Heimdall to flash it but as soon as it was flashing the kernel it failed. To my surprise the phone got bricked in front of my eyes because of that. I know the Heimdall rom i was trying to flash does work because i flashed a Cappy yesterday with it. But i guess something went wrong with the laptop that bricked the phone. I have always flashed phones using Odin without a problem but, things happens sometimes i guess. Anyways, my question is if someone knows about a guide to unbrick via JTAG for that captivate. I own a RIFF box so if it helps i would appreciate.
I know I saw somewhere a small explanation on what is soldered. But in all honesty is easier to apply UBM.
UBm? Sorry for my ignorance but what is that?
By the way Puertorro, thats a nice flag lol....
UBM Jtag requires soldering 6 small points. UBM (if I understand correctly) is making a jumper between 2 spots. Can't say for sure, I've never attempted neither, my soldering skills are no where near close to do them lol.
Okay, found something in the forum. Will give it a try and ill let you guys know how it went at all.
Yeah thanks, found the thread. I work with a solder iron every single day and i have the equipment. Thanks buddy for your help... Appreciate that
Well, its late at night or early in the morning however it might be said lol.... But im happy to say that the Captivate is alive and running again. Thanks for all your help and those impresive tools that you guys are able to develop.
enelyam said:
Well, its late at night or early in the morning however it might be said lol.... But im happy to say that the Captivate is alive and running again. Thanks for all your help and those impresive tools that you guys are able to develop.
Click to expand...
Click to collapse
what problem did you have actually? I think I bricked my friend's (like you did your neighbour's lol) captivate. It was actually 2.2.. I used Odin to flash it back to 2.1 JF6..everything went well..and the Odin also showed 'pass'..but it won't reboot..it boots..shows the at&t logo..then boots again..and it repeats..can't go to either download mode or recovery mode..tried many combinations of buttons..but of no use to that phone..
what should i do?
wvufan21 said:
what problem did you have actually? I think I bricked my friend's (like you did your neighbour's lol) captivate. It was actually 2.2.. I used Odin to flash it back to 2.1 JF6..everything went well..and the Odin also showed 'pass'..but it won't reboot..it boots..shows the at&t logo..then boots again..and it repeats..can't go to either download mode or recovery mode..tried many combinations of buttons..but of no use to that phone..
what should i do?
Click to expand...
Click to collapse
Now you are soft bricked. That phone is probably a newer build number and dislikes JF6 1 click.
Sent from my ICS powered Captivate using Tapatalk
wvufan21 said:
what problem did you have actually? I think I bricked my friend's (like you did your neighbour's lol) captivate. It was actually 2.2.. I used Odin to flash it back to 2.1 JF6..everything went well..and the Odin also showed 'pass'..but it won't reboot..it boots..shows the at&t logo..then boots again..and it repeats..can't go to either download mode or recovery mode..tried many combinations of buttons..but of no use to that phone..
what should i do?
Click to expand...
Click to collapse
take out battery, put in usb from phone to PC, hold both volume buttons, put battery back in.
Download!
So the other day i was on my captivate and i had just factory reset it to original eclair. so i tried updating it with kies but it kept failing. So i then tried using Odin and accidently checked bootloader and now my phone turned off and wont show any signs of life. PLEASE IM ASKING YOU PLEASE HELP! What do I do?
Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.
4-2ndtwin said:
Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.
Click to expand...
Click to collapse
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated
Theboss14 said:
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated
Click to expand...
Click to collapse
It doesn't format the bootloaders per say, it you flash a stock ROM with Odin that has bootloaders and if it gets interrupted while it's replacing them, your phone will be bricked as it doesn't have a way to boot (hence the name bootloaders).
The JTAG service basically pushes the bootloaders into the phone. It's something we can't do on our own unless we have the right equipment (riftbox).
Like 4-2ndtwin mentioned, try to get some response from your phone, anything that would show life. That means you can recover on your phone. From there, you'd have to be able to get in download mode and flash Odin KK4 without ANY interruption.
My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?
Theboss14 said:
My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?
Click to expand...
Click to collapse
Try the button combo to get in download mode (could even try a jig). If that fails too, you'll have to get jtag service.
Sent from my SGH-I747 using xda app-developers app
:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.
Theboss14 said:
:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.
Click to expand...
Click to collapse
The only alternative I can suggest you is to find that service around your place, hopefully for cheaper.
Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3
Theboss14 said:
Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3
Click to expand...
Click to collapse
Kinda hard to know. look at the seller's rep Imo.
Samsung Captivate is dead, unable to go in download mode....
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325
Jtag. The only possible way out.
Sent from my GT-S5282 using xda premium
vishu_10d said:
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325
Click to expand...
Click to collapse
From what I've read in your thread, you had the i9000 image working, correct? If so, why not just roll with it?
All Captivate/i9000 rom works with the i9000 bootloader. Captivate GB Rom will need to get the 2.3.5 i9000 Music Player APK, but aside from that, it all works. AOSP roms like Cyanogenmod and Slimbean will work out of the box if you get the captivate version. To install them, you'll need a slight workaround though:
Flash a kernel with CWM.
From there, flash the Captivate Glitch Kernel V13. It only comes in .ZIP format, which is why you need a CWM kernel before hand
Flash CM7 to convert the partition table(IMPORTANT. Rom will not boot if you skip this step.)
Flash anything from here on. If it throw a status 7 about device not being SGH-i896/SGH-i897, etc..., flash the Glitch Kernel before attempting to flash the ROM. You do not need to flash CM7 again.
(I know other ROM should have converted the partition table, but in reality it doesn't. Since you're flashing from Glitch, a CM7/MIUI kernel, they assumes you already have the MTD partition layout, and only resize it instead of doing a full conversion. CM7 check the partition table regardless of which kernel you're flashing it from.)
As a plus, Deep Idle works only with the i9000 bootloader. You'll get sleep of death otherwise. If you want your ATT World Phone image back, you can flash the custom param.lfs and change it manually. This can only be done from Touchwiz ROM though.