[Q] Samsung Captivate hard bricked. HELP. - Captivate Q&A, Help & Troubleshooting

So the other day i was on my captivate and i had just factory reset it to original eclair. so i tried updating it with kies but it kept failing. So i then tried using Odin and accidently checked bootloader and now my phone turned off and wont show any signs of life. PLEASE IM ASKING YOU PLEASE HELP! What do I do?

Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.

4-2ndtwin said:
Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.
Click to expand...
Click to collapse
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated

Theboss14 said:
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated
Click to expand...
Click to collapse
It doesn't format the bootloaders per say, it you flash a stock ROM with Odin that has bootloaders and if it gets interrupted while it's replacing them, your phone will be bricked as it doesn't have a way to boot (hence the name bootloaders).
The JTAG service basically pushes the bootloaders into the phone. It's something we can't do on our own unless we have the right equipment (riftbox).
Like 4-2ndtwin mentioned, try to get some response from your phone, anything that would show life. That means you can recover on your phone. From there, you'd have to be able to get in download mode and flash Odin KK4 without ANY interruption.

My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?

Theboss14 said:
My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?
Click to expand...
Click to collapse
Try the button combo to get in download mode (could even try a jig). If that fails too, you'll have to get jtag service.
Sent from my SGH-I747 using xda app-developers app

:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.

Theboss14 said:
:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.
Click to expand...
Click to collapse
The only alternative I can suggest you is to find that service around your place, hopefully for cheaper.

Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3

Theboss14 said:
Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3
Click to expand...
Click to collapse
Kinda hard to know. look at the seller's rep Imo.

Samsung Captivate is dead, unable to go in download mode....
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325

Jtag. The only possible way out.
Sent from my GT-S5282 using xda premium

vishu_10d said:
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325
Click to expand...
Click to collapse
From what I've read in your thread, you had the i9000 image working, correct? If so, why not just roll with it?
All Captivate/i9000 rom works with the i9000 bootloader. Captivate GB Rom will need to get the 2.3.5 i9000 Music Player APK, but aside from that, it all works. AOSP roms like Cyanogenmod and Slimbean will work out of the box if you get the captivate version. To install them, you'll need a slight workaround though:
Flash a kernel with CWM.
From there, flash the Captivate Glitch Kernel V13. It only comes in .ZIP format, which is why you need a CWM kernel before hand
Flash CM7 to convert the partition table(IMPORTANT. Rom will not boot if you skip this step.)
Flash anything from here on. If it throw a status 7 about device not being SGH-i896/SGH-i897, etc..., flash the Glitch Kernel before attempting to flash the ROM. You do not need to flash CM7 again.
(I know other ROM should have converted the partition table, but in reality it doesn't. Since you're flashing from Glitch, a CM7/MIUI kernel, they assumes you already have the MTD partition layout, and only resize it instead of doing a full conversion. CM7 check the partition table regardless of which kernel you're flashing it from.)
As a plus, Deep Idle works only with the i9000 bootloader. You'll get sleep of death otherwise. If you want your ATT World Phone image back, you can flash the custom param.lfs and change it manually. This can only be done from Touchwiz ROM though.

Related

[Q] Bricked Phone PLEASE HELP!

Ok guys, clearly I'm new to all this. I've only had my Galaxy S (I9000m Bell) for 3 days now and already managed to brick it.
So here's what happened, I wanted to flash CM7, what I did was rooted obviously, I unlocked since I'm with Rogers and the phone is from Bell. Installed Rom manager, titanium back, Terminal emulator, Astro, etc. So I'm pretty sure I have the required tools. I also flashed SpeedMod Froyo [K13D HPCall VoodooSnd4 SharpnessFix STABLE].
Alright so I noticed I couldn't boot into recovery from CWM even though I flashed it using Rom Manager, I tried fixing this for a while with no luck. I then came upon a thread discussing the 3 button combo fix for download mode. I wanted to get this done just in case what happened happened lol
So anyways, I couldn't find instructions for Mac so I tried putting the pieces together using terminal and Heimdall.
The last thing that happened to my phone was that I was able to get into download mode using adb reboot recovery.
However continuing to the next step to apply the fix wouldn't work for me using heimdall, it would just fail.
Being the idiot that I am I decided to exit in terminal, closed heimdall, turned off the phone and turned it back on and guess what...yup I'm screwed. It's bricked.
Now the problem is I don't have 3 button fix, so I can't get into download mode (even if i did, i wouldn't know what to do).
I read about the jig fix but I don't know if i have any other options, hopefully something faster that I can do myself instead of buying the jig and having to wait for it to **** from ebay.
Sorrry for the longgg post and hope anyone here can help me! Thanks
PS. I tried using terminal again to get to download mode like i did the first time (adb reboot recovery) and it didn't work...it said no device found or something like that
Hi It seems your only option short of looking for a repair shop or sending phone to Samsung is to try the JIG. If you don't know how to approach this print any of the diagrams or guidelines e.g. look here.
What you can do is go to electronics part shop and ask for help with the jig ask the man to wire the resistors to the pins in usb plug just to see if the phone kick starts if not, well you're screwed.
If it works just buy it if not, google for repair shop with Riff Box and JTAG adapter for I9000 it takes about half a bell to do it (repair I mean). But if it's new you have to return it in for repair.
I guess you should get the jig one way or another, either visit electronics parts shop, ebay-it
hope this'll help somewhat.
cheers
If you're in the vancouver area, you can swing by and use the jig I made
Thank you both for the feed back.
@Tony I'm actually in Ottawa. I found someone on Kjiji that also made his own but wants to charge $10 and he lives too far away so I just went ahead and ordered one off ebay for $9 with shipping.
I read on the xda thread regarding the JIG that it the phone doesn't boot at all and just shows a black screen with the bricked image (as opposed to loading the carrier name or samsung with a white screen before) that it won't work and that is my case. Anyways I hope it works, just gotta wait and see I guess. I just don't even know what the next step would be. What do I do once I'm in download mode? :S
EDIT: NVM about the whole white screen, black screen thing, it says that the JIG should work if I see the PC-Phone logo which I do.
Three days huh? Wow, when you do it, you really DO it. Reading your description it sounded a bit like a Med student doing a brain transplant.
First I would just take the phone back to your carrier or service center and say you have no idea what happened, pay the money and have them sort it out. I fear there is no easy way out of the hole you have dug.
Next you should spend a few hours reading as much as you can here and then start small. Ask questions before you do anything. Root the phone. Try a few different kernels and lagfixes. Maybe flash something from doc's kitchen or a custom ROM. Make sure you know in advance what could go wrong and how to handle it, as much as possible. Once you have some experience then try something like cm7, which is very much a beta on the sgs and quite complex to flash and set up.
Spend a little time walking before you run (no matter how much you think you know) ...you'll enjoy the trip more.
Sent from my GT-I9000 using XDA Premium App
rschenck said:
Three days huh? Wow, when you do it, you really DO it. Reading your description it sounded a bit like a Med student doing a brain transplant.
First I would just take the phone back to your carrier or service center and say you have no idea what happened, pay the money and have them sort it out. I fear there is no easy way out of the hole you have dug.
Next you should spend a few hours reading as much as you can here and then start small. Root the phone. Try a few different kernels and lagfixes. Maybe flash something from doc's kitchen or a custom ROM. Once you have some experience then try something like cm7, which is very much a beta on the sgs and quite complex to flash and set up.
Spend a little time walking before you run (no matter how much you think you know) ...you'll enjoy the trip more.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Haha I can't take it back to the carrier, I bought it off kijiji, it's from Bell and I'm with Rogers. I unlocked it and as far as I know Bell is really bad with their warranty and last time I bought a Blackberry that was locked to Bell and unlocked it I was told by Bell that I need a receipt, which I obviously don't have. I would rather throw the phone away and buy a new one than have to deal with carriers.
I'm just gonna try the JIG I guess since I already ordered it. Hopefully doesn't take too long to get here.
And yes, I definitely need to read more and follow the instructions on a Windows PC instead of trying to put bits and pieces together and try to get everything working on Mac.
It seems however that the more I read the more I get confused, is it just me or are there so many different ways to achieving the same thing?
Anyways, I bought this as my first Android to experiment and learn on and so far that's what I've been doing. I'm not afraid of running into problems, I'll try to enjoy fixing them
mike1089 said:
Haha I can't take it back to the carrier, I bought it off kijiji, it's from Bell and I'm with Rogers. I unlocked it and as far as I know Bell is really bad with their warranty and last time I bought a Blackberry that was locked to Bell and unlocked it I was told by Bell that I need a receipt, which I obviously don't have. I would rather throw the phone away and buy a new one than have to deal with carriers.
I'm just gonna try the JIG I guess since I already ordered it. Hopefully doesn't take too long to get here.
And yes, I definitely need to read more and follow the instructions on a Windows PC instead of trying to put bits and pieces together and try to get everything working on Mac.
It seems however that the more I read the more I get confused, is it just me or are there so many different ways to achieving the same thing?
Anyways, I bought this as my first Android to experiment and learn on and so far that's what I've been doing. I'm not afraid of running into problems, I'll try to enjoy fixing them
Click to expand...
Click to collapse
You are right that there are different approaches to doing the same thing...often it is just a matter of what works for you.
Once you have a jig you will have no trouble going in to download mode. From there anything is fixable using odin. I would suggest reading the thread about darky's resurrection ROM which is a good place to start from when you have had trouble.
Just remember to do your homework and enjoy the process.
Good luck.
Sent from my GT-I9000 using XDA Premium App
rschenck said:
You are right that there are different approaches to doing the same thing...often it is just a matter of what works for you.
Once you have a jig you will have no trouble going in to download mode. From there anything is fixable using odin. I would suggest reading the thread about darky's resurrection ROM which is a good place to start from when you have had trouble.
Just remember to do your homework and enjoy the process.
Good luck.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sounds good, will definitely keep that in mind. Thank you for your help, very much appreciated.
Hey guysss!
I just wanted to let you all know that I am a biggg IDIOT! LOL
So I ordered the JIG from ebay and on my way home I went to a couple of electronic stores to try and buy those resistors because I wanted to make my own JIG as well. Anyways, all the stores were closed and my friend told me he can grab the resistors from his lab tomorrow (engineering students lol)
I obviously don't want to wait till tomorrow. I came home and decided to take out the phone from its box again. This time I did the 3-button combo but in a different way, not using volume UP + DOWN + power but I came across a Samsung PDF explaining the Anyway JIG and it showed to press Volume Down + Home button + Power.
I gave that a try and voilà!!! I'm back in download mode! YAYYY!
I'm afraid to turn it off or pull the battery out cuz I don't want to risk ruining it even more so I'm gonna go ahead with rschenck's suggestion and use Darky's Resurrection Rom!
Thank you all for your help!!
Uh oh...one last problem
So as of now I am able to access Download Mode but not Recovery:S
Any ideas?
mike1089 said:
Uh oh...one last problem
So as of now I am able to access Download Mode but not Recovery:S
Any ideas?
Click to expand...
Click to collapse
If you can get to download mode you are fine for the moment since that is what you need for odin. Follow one of the guides for using odin here at XDA exactly, and good luck.
Sent from my GT-I9000 using XDA Premium App
Ok so after download mode, I followed the steps to reflash stock, i downloaded the same JL2 that I had prior. Odin said passed but the phone wouldn't boot, it would just get stuck on S in the boot screen...
I did a complete wipe data/cache through recovery and that didnt help.
I then thought I would give Darky's Resurrection a try since it wipes everything anyways...odin again said PASSED but there was a sign of a circle on the screen and it didn't boot. I did it again, said passed again and this time im on a endless boot loop. It turns on says samsung i9000, etc. and then blinks and does it again.
I am still able to get into download mode. I just don't know what to do anymore
Download mode = Yes
Then download stock firmware from samsungfirmwares.com not 2.3.3
or from link
http://forum.xda-developers.com/showthread.php?t=846913
Download ODIN
Flash stock firmware through Odin with pit 512 and repartition checked .
If that fails try Eclair firmware 2.1
jje
JJEgan said:
Download mode = Yes
Then download stock firmware from samsungfirmwares.com not 2.3.3
or from link
http://forum.xda-developers.com/showthread.php?t=846913
Download ODIN
Flash stock firmware through Odin with pit 512 and repartition checked .
If that fails try Eclair firmware 2.1
jje
Click to expand...
Click to collapse
Ok so I did the above instructions and I the same happened. I am on JL2 now but it wont pass the boot screen (Stuck on the S). I did check repartition and 512 pit and pda.
I also have this error:
Can't mount DBDATA: copy default media content failed
My question is if I try eclair will I lose 3 button fix? From what I was able to gather the 3 button fix for Bell I9000M only came out with JL2.
Will I lose it or is it permanent once I have it?

[Q] soft bricked ! maybe...

Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
kunalteji1993 said:
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
Click to expand...
Click to collapse
I have no experience with this, but I did keep this video link on how to put a bricked Samsung into download mode just in case I needed it. The usb jig is the same for both the captivate and the Note from what I have read:
http://androidforums.com/captivate-...ung-captivate-usb-jig-video-start-finish.html
If you are able to enter download mode then Just try with different version of PC Odin , like V1.83, V1.85, V1.87. and do not worry about Stock ROM you can always download it from below link.
http://forum.xda-developers.com/showthread.php?t=1329360
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
kunalteji1993 said:
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
Click to expand...
Click to collapse
I fear your Note is done for, if your PC Odin session got interrupted.
chasmodo said:
I fear your Note is done for, if your PC Odin session got interrupted.
Click to expand...
Click to collapse
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
kunalteji1993 said:
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
Click to expand...
Click to collapse
Dont take it service centre.If you do so also dont say them you flashed custom rom.Then they wont fix it under warranty.Dont worry now.
Try different usb ports,uninstalling drivers and reinstalling it and try again.And as you are noob I recommend not to flash ICS customs at the moment.Stay with GB
I say go to your friend first who rooted your phone then ask him to try the various methods given in the forum recovering from softbrick.
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
kunalteji1993 said:
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
Click to expand...
Click to collapse
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
vijai2011 said:
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
Click to expand...
Click to collapse
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
kunalteji1993 said:
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
Click to expand...
Click to collapse
its a kernel with a custom recovery.Its like CWM(Clock Work Mod).You could find it in the development section.Download the kernel.Could you get into recovery mode by turning off the phone,holding "vol up+home button+powerbutton"?
---------- Post added at 09:08 AM ---------- Previous post was at 09:00 AM ----------
kvsandeepreddy said:
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
Click to expand...
Click to collapse
No need for jig because he can enter DL mode.And did using jig removed the yellow triangle for you
thanx guys for helping and current updates ---
i am in 12 th so untill my entrance exams are over i won't get to have the phone in my possession since my dad has it now ... so maybe after they are over i will continue on my quest to get it corrected!
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
how did you fix it? this may help some else in the future
ratcom said:
how did you fix it? this may help some else in the future
Click to expand...
Click to collapse
service centre guys....remember he/she saying in pm
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
wenn connecting to Kies at firmware Kies says something like LC1. lb2 (XXX) as product code? if so they have changed the board on the service center and they haven't activate the Pcode on your phone google "Pcode not active" you will find few posts till now only ppl from Germany had it who send their phones to service center via Saturn/Media Markt ist guess it was/is a technician you was sleeping on the seminare/briefing how to change the board on Note. hope it will help you if it is that try to replace your phone, had the XXX Pcode after service center got a replacement. after a month of arguing with the salesman.
Sent from my GT-N7000 using Tapatalk 2
Uninstall the Odin in your PC and install it again to see if it works.
i am pretty much sure that they didn't change the mother board. they must have added the firmware that's all as my mboard wasn't damaged at all , it was just that the battery failed when i gave it to samsung people that's why my phone overheated when they charged it and that's when the battery must have been destroyed maybe due to that overheating they must have thought to change mboard (but they didn't cause those engineers must have changed the battery prior to examining my phone for the problem). AND i didn't have pc odin on my THIS pc to start with. it was in my laptop and kies didn't even reckoned my phone there well that's why i installed kies on HERE . i guess service center people can update it the same way they installed this firmware here..... what do u suggest?
AND Braxos Pcode is active --- it's something :
GT-N7000ZBAINU
and no, the current firmware info kies shows is something like ---
N7000DDLC1/N7000ODDLC1/N7000DDLC1/N7000DDLC1(INU)
(now i think they have done something wrong - it's all n7000ddlc1 here. what is this? )
GUYS can u also tell me what does your firmware version shows (just for reference , pls do it!)
p.s my phone is still in warranty since they fixed my phone free of cost plus they also replaced the battery for free . before my phone was sent to service center my phone had a flash count of two yet they fixed it under warranty(yay!).And thank you everyone!
MY ADVICE TO NEWBIES----
If your phone is soft bricked and you don't know what to do and you think you will make the matter even worse then don't do anything to permanently brick it . you guys should go to service center , they might even fix it for u for free just like they did it for me!

My Galaxy Note Is DEAD!!

Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
hav0c said:
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
Click to expand...
Click to collapse
WOW...
the problem is that i live in a fu**ed up country and we dont have samsung here.
all phones come without warranty and by smuggling from other countries
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Dude, if you have no way of repairing a bricked phone in your country then stay away from flashing custom ROMs!!!
Sent from my superior GT-N7000 using Tapatalk
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
Click to expand...
Click to collapse
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
octavian90 said:
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
if you had gone through what i went through to get the phone, you would probably do the same.Thanks for the reply, any thing would help me right now.
vijai2011 said:
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
Click to expand...
Click to collapse
Thanks man, i will definitely try it right away.
mother board
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
chasmodo said:
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
MR.change said:
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
Click to expand...
Click to collapse
pvillasuso said:
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
Click to expand...
Click to collapse
You guys are awesome, im gonna do everything you said and get back with the results, fingers crossed.
I have a friend who's going to Dubai,UAE in a week or so. if nothing worked i'll send the phone with her to repair it at samsung,does anybody know if there's a samsung service center in Dubai and give me the location ?
i cant thank you enough,really appreciate all the help.
firasusman said:
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
Click to expand...
Click to collapse
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Try a different USB cable?
Sent from my SPH-D710 using XDA
izzmohamed said:
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Click to expand...
Click to collapse
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
jeffrey567 said:
Try a different USB cable?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I did, still the same.
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Hmmm,i'll try cleaning it.I had the same situation, so the jig should work fine despite this problem ?
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
lanwarrior said:
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
Click to expand...
Click to collapse
I am wondering the same thing, mine got bricked about a week ago and I don't really know what to do with it

Hard Bricked Galaxy Note GT-N7000 - Possible Fix?

Hello!
During flashing leaked kernel my phone was on soft brick, I wiped cache partition and data in CWM. This was the end of my beloved Note, it is 100% dead and none of the possible fixes posted works so far.
I have heard there is a possible fix by re partitioning and connection the phone in Linux environment, this way the computer reads the phone and can be fixed by repartitioning and could get into download mode. Please let me know if anybody confirms this.
Alternatively, what is the next step. My phone is still under warranty but I am scared if Samsung would find out the history of rooting or as my Phone is 100% dead they would not be able to find out, confused.......
If the motherboard needs to be replaced, how much would it cost, where should I take and most important if my phone recovers can I still play around with custom ROMs?
Look forward to suggestions bring my phone live as I purchased it on loan and it brings immense pain to pay emi for a dead phone.
Regards,
AK
Even it bricked by emmc bug, there shud be download mode still available
-First try to get other charged battery (or charge yours) and try to put in download mode, and look to Lt upper corner what is your flash score. If it is zero, simply reclain warranty.
-Otherwise try this
http://forum.xda-developers.com/showthread.php?p=26285877
dr.ketan said:
Even it bricked by emmc bug, there shud be download mode still available
-First try to get other charged battery (or charge yours) and try to put in download mode, and look to Lt upper corner what is your flash score. If it is zero, simply reclain warranty.
-Otherwise try this
http://forum.xda-developers.com/showthread.php?p=26285877
Click to expand...
Click to collapse
Thanks. I tried using charged batteries but still does not get into Download Mode also after reading somewhere I tried to connect using Odin assuming screen would be black but Odin detects. Even this did not work
So, no way of getting DM or looking at binary count.
Regards.
AK
Your phone is under warranty yet you are asking for costs? Those "recovery" method will give you a "crippled" device in terms of mem capacity.
So go and claim warranty. They wont know anything since your phone is totally dead anyway.
Sent from my GT-N7000 using xda app-developers app
praetorius said:
Your phone is under warranty yet you are asking for costs? Those "recovery" method will give you a "crippled" device in terms of mem capacity.
So go and claim warranty. They wont know anything since your phone is totally dead anyway.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Hey, I just cam back from SS service. they said it could be a motherboard issue and they are replacing the motherboard.
Does that mean they would install the Stock Rom from fresh, I am sure yes.
Waiting for my recovered phone and educating myself to safely play around with custom ROMs.
One last question, which is the best stable custom ROM available for Galaxy Note, in terms of UI and better battery life?
Many Thanks.
AK
avinay4you said:
Hey, I just cam back from SS service. they said it could be a motherboard issue and they are replacing the motherboard.
Does that mean they would install the Stock Rom from fresh, I am sure yes.
Waiting for my recovered phone and educating myself to safely play around with custom ROMs.
One last question, which is the best stable custom ROM available for Galaxy Note, in terms of UI and better battery life?
Many Thanks.
AK
Click to expand...
Click to collapse
Congrats on the replacement;
Custom ROM's are kind of personal preference, Best bet is to do your research now while you wait and you can decide for yourself which features you like / want / need in a ROM..
Suggestions to check would be ParanoidAndroid / CleaNote from my point of view, I've tried both but still run Stock ICS with custom Kernel.. Suits my needs...
while gaming, my phone suddenly hang and i decide to restart the device itself. upon booting, i am stuck at the "samsung" logo. I have tried flashing stock rom and kernel but to no avail. i can still go into download mode and recovery mode. Anybody know whats gone wrong?
And if i send for waranty, it is a one to one exchanged?
driftkids said:
while gaming, my phone suddenly hang and i decide to restart the device itself. upon booting, i am stuck at the "samsung" logo. I have tried flashing stock rom and kernel but to no avail. i can still go into download mode and recovery mode. Anybody know whats gone wrong?
And if i send for waranty, it is a one to one exchanged?
Click to expand...
Click to collapse
what is the current rom on your phone? have you tried going to recovery and wiping dalvik cache? still same thing? If it is, worst case you can try (since both Recovery and Download works still) is to wipe data in recovery and restart your phone again(Don't try doing this if your using an infected kernel and/or in ICS Rom)
Going back,
You have a soft bricked phone.. Why would you exchange it for warranty? you can easily fix your issue without returning it to Samsung.
letters_to_cleo said:
what is the current rom on your phone? have you tried going to recovery and wiping dalvik cache? still same thing? If it is, worst case you can try (since both Recovery and Download works still) is to wipe data in recovery and restart your phone again(Don't try doing this if your using an infected kernel and/or in ICS Rom)
Going back,
You have a soft bricked phone.. Why would you exchange it for warranty? you can easily fix your issue without returning it to Samsung.
Click to expand...
Click to collapse
i am currently using stock ics 4.0.4 with GL NOTECORE kernel. i have tried wipe dalvik cache but still didnt solve it. i will try wipe date later. thanks
ya, format data does solved it. i am wondering whether will soft brick cause any damage to the hardware?
help
hello
Same problem...pls HELP !!!
I tried to install a custom rom and then the horror began. I can't turn it on geto to download or recovery mode.. I sent it to service because I still have a warranty but I don't know will they see the history of installed roms. The man I talked to said to me that they can do it but I read a comment that it is impossible to see so I got a hope. They also told me that it could be about motherboard and that they will do everything they can to save it. I am really afraid of losing my Note. I hope you guys will help me and tell me sth good.. I am also interested is it possible to fix it with usb jig. ?
thanks, my regards..
Already it's with samsung. If they cant do anything to revive, its a motherboard replacement.
Sent from my GT-N7000 using xda app-developers app
ive been trying to get my note n7000 fixed now way to get it to work jtag just doesn't work boot loader wont go in the phone at all new phone it is
nedzad95 said:
I tried to install a custom rom and then the horror began. I can't turn it on geto to download or recovery mode.. I sent it to service because I still have a warranty but I don't know will they see the history of installed roms. The man I talked to said to me that they can do it but I read a comment that it is impossible to see so I got a hope. They also told me that it could be about motherboard and that they will do everything they can to save it. I am really afraid of losing my Note. I hope you guys will help me and tell me sth good.. I am also interested is it possible to fix it with usb jig. ?
thanks, my regards..
Click to expand...
Click to collapse
Don't worry, if it is with samsung alrd. They'll sure give you replacement of the motherboard if they can't do anything to your existing one. This is considered as the "manufacturing fault", and therefore, they must be able to replace it.
1st few batches, N7000 came out under gingerbread 2.3.6 technology, and it worked very well without the eMMC brick bug. It is happened only when they upgrade to ICS, with their own stock kernel, which triggered the brick bug.
So long as they are delaying the fix for their own stock kernel with the eMMC brick bug removed, I think samsung is still liable to give replacement to user, no matter what you did to your device. As long as it is eMMC brick bug, and you have your warranty.
Why ?
very simple... Even most of the samsung sales person on their respective outlets, they know a lil bit or perhaps don't know at all about this bug. Unless the sales person is those who likes to play with handphone like most of us here.
And if they do know... they won't tell you as well about this bug. Otherwise, will you buy it ? :fingers-crossed:
So as a consumer, we have the right to be replaced if the bug has been triggered due to factory reset / wipe of data, since no one told us about this. **peace**.
Really do hope you get your replacement once they call you to take your phone.
Good Luck !
Sent from the corner of this rounded earth.
antique_sonic said:
Don't worry, if it is with samsung alrd. They'll sure give you replacement of the motherboard if they can't do anything to your existing one. This is considered as the "manufacturing fault", and therefore, they must be able to replace it.
1st few batches, N7000 came out under gingerbread 2.3.6 technology, and it worked very well without the eMMC brick bug. It is happened only when they upgrade to ICS, with their own stock kernel, which triggered the brick bug.
So long as they are delaying the fix for their own stock kernel with the eMMC brick bug removed, I think samsung is still liable to give replacement to user, no matter what you did to your device. As long as it is eMMC brick bug, and you have your warranty.
Why ?
very simple... Even most of the samsung sales person on their respective outlets, they know a lil bit or perhaps don't know at all about this bug. Unless the sales person is those who likes to play with handphone like most of us here.
And if they do know... they won't tell you as well about this bug. Otherwise, will you buy it ? :fingers-crossed:
So as a consumer, we have the right to be replaced if the bug has been triggered due to factory reset / wipe of data, since no one told us about this. **peace**.
Really do hope you get your replacement once they call you to take your phone.
Good Luck !
Sent from the corner of this rounded earth.
Click to expand...
Click to collapse
Thanks man.. you really encouraged me.. So they should give me a replacement.. I am still worried because the man that I talked to told that this kind of problem where I installed a bad rom is not under warranty so that is what scares me the most..
thanks for help...
Just to say:
Galaxy Note GT-N7000, ICS 4.0.4
regards...
driftkids said:
while gaming, my phone suddenly hang and i decide to restart the device itself. upon booting, i am stuck at the "samsung" logo. I have tried flashing stock rom and kernel but to no avail. i can still go into download mode and recovery mode. Anybody know whats gone wrong?
And if i send for waranty, it is a one to one exchanged?
Click to expand...
Click to collapse
seems to be peculiar issue.. they should exchange for sure.. Sorry, I don't have much idea on this..
i'm very impatient..
Hey guys,
I just want to inform you that my Note is at service for 3-4 days... I am contacting them every day and they say it's not done yet.. So I hope it means that they're working on it... I will write if something new happens..
My Regards, Nedzad
Hey
I contaced service and they told they couldn't do anything yet.. Repairman told me that they will get a new JTAG repair box in 20 days and then they will fix it for free.. I think it is a good news
gr8

[Q] How to Unbricking Hard Bricked Samsung Galaxy Ace

Hey Guys,
I have Samsung Galaxy Ace (GT-S5830), recently while uprading the my ace with the Cyanogenmod10, i had bricked my phone, now it never goes into the download mode so that i can flash the firmware with Odin. Actually yesterday, i used Rom Manager to Install the Custom Rom, and when said yes to install the custom rom, phone shutdown, and never started again, i googled around for some way out to go into the download mode, tried all the key combination, but could not go into the download mode, i tried the Home + VolumeUp and connected the USB to PC, with this method, my phone was detected, but because it was not in the download mode (i guess), so Odin just stucked at setup connection... and does not go further. Have anyone went through this dilemma, can anyone help me out of this, my warranty period is elapsed, so was thinking to get phone back to life myself.
Please anyone help me with this, i love the phone... I know that was my mistake to use Rom Manager to Install the Rom.
take it to the service. there is no other way. i tried everything, belive me. repairing costed me 200hrk (around 45$).
and
DONT USE ROM MANAGER
By taking it to a service center...Only way to recover it
Controversies,controversies everywhere :what:
I suppose this may help: Un-bricking your SGA
How to Unbricking Hard Bricked Samsung Galaxy Ace
Rishabh13 said:
I suppose this may help: Un-bricking your SGA
Click to expand...
Click to collapse
@Rishabh i tried what was there in the page (the link above you posted), i went thru all the steps, even my phone was detected in Odin, but when i selected the file and clicked on Start, the Process Started and stucked at "setup connection" and does not goes any further. what could be done for this.
hr.nomad said:
take it to the service. there is no other way. i tried everything, belive me. repairing costed me 200hrk (around 45$).
and
DONT USE ROM MANAGER
Click to expand...
Click to collapse
i know that could be the way to back my phone to life, but just wondering, what the servicing guys would be going to do, which i cannot do.
They'll use a JTAG. You can do that to but they're really really really expensive.
Sent from my GT-S5830 using xda premium
SMillerNL said:
They'll use a JTAG. You can do that to but they're really really really expensive.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
actually i know they will be going to use that, but they says they will be replacing the motherboard and according to that they are charging, but i know they will not be going to replace motherboard, is there any way i can check whether they have replaced the motherboard or not, or is there any other way to make it work without going to the service center.
Deprednd was
smartabbas said:
my warranty period is elapsed, so was thinking to get phone back to life myself.
Click to expand...
Click to collapse
I don't think being in-warranty would have made any difference, it would have been void anyway
smartabbas said:
actually i know they will be going to use that, but they says they will be replacing the motherboard and according to that they are charging, but i know they will not be going to replace motherboard, is there any way i can check whether they have replaced the motherboard or not, or is there any other way to make it work without going to the service center.
Click to expand...
Click to collapse
check the back of your phone.when you remove your battery you will see 3 gold squares..when you take it to the service center and it becomes 9 silver small squares it means that they didnt change the motherboard they just solder it to connect wires to the motherboard they used jtag...:cyclops:
smartabbas said:
actually i know they will be going to use that, but they says they will be replacing the motherboard and according to that they are charging, but i know they will not be going to replace motherboard, is there any way i can check whether they have replaced the motherboard or not, or is there any other way to make it work without going to the service center.
Click to expand...
Click to collapse
Check for imei no. If they use JTAG it won't change since the motherboard/chip set of the phone is same.
Sent from my GT-S5830 using xda premium
bogsie16 said:
check the back of your phone.when you remove your battery you will see 3 gold squares..when you take it to the service center and it becomes 9 silver small squares it means that they didnt change the motherboard they just solder it to connect wires to the motherboard they used jtag...:cyclops:
Click to expand...
Click to collapse
i would like to buy the RiffBox and do the Jtag myself, can anyone tell me where i can buy that and how much would it cost.
smartabbas said:
i would like to buy the RiffBox and do the Jtag myself, can anyone tell me where i can buy that and how much would it cost.
Click to expand...
Click to collapse
Don't know where, but its more expensive than a brand new ace (and lots of low-mid range smartphones)
I bricked mine 1 week after getting it. I took it in and said it shut off and I can't turn it back on. They made sure it wasn't the battery, then replaced it under warranty. So if you still have a warranty, it's worth a try. The guys at the store won't know you've been screwing around with it.
To use Rom Manager you need a CM-compatible rom installed. It says that right on Rom Manager's download page. DO NOT USE WITH STOCK ROMS EVER!!!
Sent from my GT-S5830 using xda premium
is there any other way to recover my phone other than JTag, its really costing me a lot, can anyone help me with any other possible solutions, my warranty period has been expired. I really need my phone get back to life, missing my ace a lot. Can anyone please help me with this.
smartabbas said:
is there any other way to recover my phone other than JTag, its really costing me a lot, can anyone help me with any other possible solutions, my warranty period has been expired. I really need my phone get back to life, missing my ace a lot. Can anyone please help me with this.
Click to expand...
Click to collapse
No.
Sent from my GT-S5830 using xda premium
sauron82 said:
I bricked mine 1 week after getting it. I took it in and said it shut off and I can't turn it back on. They made sure it wasn't the battery, then replaced it under warranty. So if you still have a warranty, it's worth a try. The guys at the store won't know you've been screwing around with it.
To use Rom Manager you need a CM-compatible rom installed. It says that right on Rom Manager's download page. DO NOT USE WITH STOCK ROMS EVER!!!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
It also says not to use it at all around here. It bricks ace.
Sent from my GT-S5830 using xda premium
---------- Post added at 09:27 AM ---------- Previous post was at 09:26 AM ----------
smartabbas said:
is there any other way to recover my phone other than JTag, its really costing me a lot, can anyone help me with any other possible solutions, my warranty period has been expired. I really need my phone get back to life, missing my ace a lot. Can anyone please help me with this.
Click to expand...
Click to collapse
Go to a service center and pay the repair fee.
Sent from my GT-S5830 using xda premium
smartabbas said:
Hey Guys,
I have Samsung Galaxy Ace (GT-S5830), recently while uprading the my ace with the Cyanogenmod10, i had bricked my phone, now it never goes into the download mode so that i can flash the firmware with Odin. Actually yesterday, i used Rom Manager to Install the Custom Rom, and when said yes to install the custom rom, phone shutdown, and never started again, i googled around for some way out to go into the download mode, tried all the key combination, but could not go into the download mode, i tried the Home + VolumeUp and connected the USB to PC, with this method, my phone was detected, but because it was not in the download mode (i guess), so Odin just stucked at setup connection... and does not go further. Have anyone went through this dilemma, can anyone help me out of this, my warranty period is elapsed, so was thinking to get phone back to life myself.
Please anyone help me with this, i love the phone... I know that was my mistake to use Rom Manager to Install the Rom.
Click to expand...
Click to collapse
Rom manager is the culprit !!! i too installed it and hard bricked my lovely ace... :crying:
if your under warrenty go to samsung service center they'll replace the motherboard free of cost and would never know what went wrong with your phone...
where we can get repair in that cost 200
hr.nomad said:
take it to the service. there is no other way. i tried everything, belive me. repairing costed me 200hrk (around 45$).
and
DONT USE ROM MANAGER
Click to expand...
Click to collapse
hi
i made a mistake in changing the Rom samsung ace gt5830 by mistakely i installed the rom of gt5830i after that my phone is not getting download mode pls i need a my phone back to working condiction i can pay my phone num is 8904600225 if u no any thing pls help me thanks
ajay8904 said:
hi
i made a mistake in changing the Rom samsung ace gt5830 by mistakely i installed the rom of gt5830i after that my phone is not getting download mode pls i need a my phone back to working condiction i can pay my phone num is 8904600225 if u no any thing pls help me thanks
Click to expand...
Click to collapse
Do you have recovery mode?

Categories

Resources