Related
Today i've done a hard reset. After i try to open it up, it shows the M logo but then it just restarts. What should i do? (oh i can enter the recovery menu but wipe+cache doesn't have any effect)
If you want to wipe everything anyway, flash one of the current sbf via RSDLite.
any other sugestions? maybe to what caused that?
OR MAYBE A GUIDE?
bump bump
If you can access recovery, then flash the same ROM again, so that data isn't lost and the broken files will be maybe replaced..guides can be found in the milestone delevopment section
i haven't tried that. but to flash a custom rom didn't you have to root you're phone?
No, you won't need root. Just download an sbf-file and use RSDLite to flash it... This is really no big thing and it will immediately solve your problem. Don't know what you're still waiting for?!
maybe you can provide me a site to download some sbf's please?
andreit0 said:
maybe you can provide me a site to download some sbf's please?
Click to expand...
Click to collapse
and-developers.com/sbf:milestone
Sent from my Milestone using Tapatalk
what are the chances of permanetly bricking my phone?
andreit0 said:
what are the chances of permanetly bricking my phone?
Click to expand...
Click to collapse
Nil, if you follow procedure.
Sent from my Milestone using Tapatalk
In open recovery, also run the scandisk on the sd card.
Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!
Serenadier said:
Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!
Click to expand...
Click to collapse
Wildfire wrong section, this mini thread
apisfires said:
Wildfire wrong section, this mini thread
Click to expand...
Click to collapse
I mean I've done it before on my Wildfire, but there's a problem with this on the Galaxy Mini. Problem phone in question is the Galaxy Mini now.
Sorry for the misunderstanding.. any help you can offer me?
installed from where and how?
kandros said:
installed from where and how?
Click to expand...
Click to collapse
Okay so first I downloaded the OPS, Gingerbread firmware and ODIN. Then I installed Kies for drivers, and then I opened ODIN, inserted the OPS and Gingerbread firmware file, started the process.
Somehow when it came to the reboot part, the phone just kept rebooting (screen lights up, turns off, pause, repeats again) and it hasn't worked since.
Then now there's an error with setup connection which presumably has something to do with the drivers, so I reinstalled it but now setup connection keeps occurring...
Okay, now, I tried doing the whole process again... I'm stuck at 'Close serial port and wait until rebooting' as the phone constantly flickers on and off repeatedly with no sign of anything going on.
Somebody please help :/
Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?
Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App
Small_town_boy said:
Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
roofrider said:
Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?
Click to expand...
Click to collapse
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..
download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk
Serenadier said:
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..
Click to expand...
Click to collapse
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong
Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?
kandros said:
download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk
Click to expand...
Click to collapse
Even when the firmware is being flashed, the screen constantly flashes on and off. Is this normal?
I'd try that, but I don't know if it would work...
roofrider said:
Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?
Click to expand...
Click to collapse
I'm on Asia version, I downloaded a 2.3.4 Asian version too.
apisfires said:
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong
Click to expand...
Click to collapse
1. From ODIN 4.38 + Tass.Ops.rar -
a. Tass_V1.0.ops
b. S5570_Odin Multi Downloader v4.38.exe
2. S5570DXKPD_S5570OLBKPD.zip
I don't think it's wrong, is it...?
Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.
dkn91 said:
Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.
Click to expand...
Click to collapse
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.
Serenadier said:
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.
Click to expand...
Click to collapse
Try flashing a 2.3.3 multi package firmware
roofrider said:
Try flashing a 2.3.3 multi package firmware
Click to expand...
Click to collapse
Doing that right away.
Is it normal for the phone to flicker on and off during the flash process, and after the flash process is complete, with ODIN showing PASS?
Okay, so installing a multi package firmware didn't work either. Now what. )': at wit's end here.
It won't flicker.
And when it's done it'll show pass.
While in download mode, Odin shows connected rite? A yellow box Appears?
Hey guys, I'm new to this forum and I got my Galaxy Note a few weeks ago.
And today I tried to root it, but I think somehow it went wrong, now my Note could be turnned on, but the screen just stayed black. No logo, just sounds. The two 'buttons' below would light up too.
Any suggestions on how to fix it?
Try to go into download mode and reflash a gb stock rom via odin
Sent from my GT-N7000 using xda app-developers app
Jestina said:
Hey guys, I'm new to this forum and I got my Galaxy Note a few weeks ago.
And today I tried to root it, but I think somehow it went wrong, now my Note could be turnned on, but the screen just stayed black. No logo, just sounds. The two 'buttons' below would light up too.
Any suggestions on how to fix it?
Click to expand...
Click to collapse
Why do you not give us a few more details?
What did you do, where did you start, what went wrong?
ThaiDai said:
Why do you not give us a few more details?
What did you do, where did you start, what went wrong?
Click to expand...
Click to collapse
Okay, I tried to root it using a pre-rooted rom, N7000DXLC2 and some md5 and tar file that came along with it, but I'm not sure if I'm doing it correctly, my actual baseband is LR1 and the kernel is LR2.
At first, after attempting to root it, I kinda of did it successfully, I reached the green android alien place, but there's alot of pop up saying that this progress ended (something like that, couldn't remember.)
So I decided, to find and download my actual baseband's stock rom and try to use Odin to flash it, it succeeded, but the problem is, my screen is staying black this time, But I know that my phone is still working, just that the screen is not displaying anything..
Are you able to get into download mode?
When you tried to flash the rooted ROM in ODIN was it a 3 part file or a single file?
Did you setup ODIN correctly as per instructions on this site?
CJSlim79 said:
Are you able to get into download mode?
When you tried to flash the rooted ROM in ODIN was it a 3 part file or a single file?
Did you setup ODIN correctly as per instructions on this site?
Click to expand...
Click to collapse
Yeah I did get into the download mode, the first ROM was 3 part file, second one was a single file.. and yeah setup correctly.
Nobody knows a fix for this?
Jestina said:
Nobody knows a fix for this?
Click to expand...
Click to collapse
Ok -
You can get back into download mode - what happens when you try to flash a stock GB ROM in PC Odin, *Use a 1 part file from here*
http://forum.xda-developers.com/showthread.php?p=26455511#post26455511
You need to provide as much info as you can otherwise it is hard to help...
In ODIN - You said it was setup correctly? Where did you confirm this?
Jestina said:
Nobody knows a fix for this?
Click to expand...
Click to collapse
Read here. http://androidadvices.com/update-galaxy-note-n7000-gingerbread-xxlc1-236-firmware/2/
Read it carefully and do it at your own risk if you decide to flash it.
I don't think it'll work.. I'm already back on my actual baseband, its just the problem with the screen, its black and it won't display anything. My phone is still working.
Jestina said:
I don't think it'll work.. I'm already back on my actual baseband, its just the problem with the screen, its black and it won't display anything. My phone is still working.
Click to expand...
Click to collapse
Are you on a complete STOCK setup? or custom kernel?
This is very odd - sounds like possible hardware fault if your phone is working but no screen - You definitely flashed the correct ROM yeah? I would still give a try to reflashing the STOCK GB via PC Odin..
Question - When you goto Download Mode - Do you see the Android Guy? If so there's something wrong with your flashed ROM and not a screen fault so a re-flash should resolve that..
+1, Definitely not a screen problem if you are able to go in download mode & see the green guy.
Just try to reflash via PC odin a GB ROM.
CJSlim79 said:
Are you on a complete STOCK setup? or custom kernel?
This is very odd - sounds like possible hardware fault if your phone is working but no screen - You definitely flashed the correct ROM yeah? I would still give a try to reflashing the STOCK GB via PC Odin..
Question - When you goto Download Mode - Do you see the Android Guy? If so there's something wrong with your flashed ROM and not a screen fault so a re-flash should resolve that..
Click to expand...
Click to collapse
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...
Jestina said:
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...
Click to expand...
Click to collapse
Ok but in download mode - do you see the Android guy?.....or girl..........
If not there's a chance you've a screen problem.. or you flashed something you shouldn't have...
Give the Stock GB Flash a go through ODIN and report back..
Black Screen
Jestina said:
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...
Click to expand...
Click to collapse
First sorry for my english.
If your phone is open but screen is not open. TRY following steps.
Flash this rom with Odin ( N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar )
Kernel: CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5
if loading stop to hidden.img dont worry. try again loading rom.
i think solving the problem.
CJSlim79 said:
Ok but in download mode - do you see the Android guy?....or girl..????........
..
Click to expand...
Click to collapse
Seriously... your kidding right??
geist_100 said:
First sorry for my english.
If your phone is open but screen is not open. TRY following steps.
Flash this rom with Odin ( N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar )
Kernel: CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5
if loading stop to hidden.img dont worry. try again loading rom.
i think solving the problem.
Click to expand...
Click to collapse
I would go with this route as well
@OP, I think what messed up your phone is you inadvertently flash either a wrong kernel..(a kernel meant for GB but your already on ICS or the other way around as well)
had the same issue you have before... **** I flashed a kernel not design for our NOTE....
After that, my phone just stays black.. but I could actually go to download mode... so what I did? Flashed it back to GB stock and work my way from there...
Hope that helps something bud
Cheers!
CJSlim79 said:
Ok but in download mode - do you see the Android guy?.....or girl..........
If not there's a chance you've a screen problem.. or you flashed something you shouldn't have...
Give the Stock GB Flash a go through ODIN and report back..
Click to expand...
Click to collapse
lol that cracked me up thanks,
Thought android was androgenious, mwahahah
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
lol that cracked me up thanks,
Thought android was androgenious, mwahahah
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I'm pleased a couple of people picked up on it
Erm.. I've downloaded the CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5, but when I open it up its a zImage file.
What am I suppose to do with it? x_x
Edit; Nvm, got it!
letters_to_cleo said:
Seriously... your kidding right??
I would go with this route as well
@OP, I think what messed up your phone is you inadvertently flash either a wrong kernel..(a kernel meant for GB but your already on ICS or the other way around as well)
had the same issue you have before... **** I flashed a kernel not design for our NOTE....
After that, my phone just stays black.. but I could actually go to download mode... so what I did? Flashed it back to GB stock and work my way from there...
Hope that helps something bud
Cheers!
Click to expand...
Click to collapse
I did what you said, but now my note still stays black.. I guess its my screen problem now huh.. Weird..
Hi,
I'm hoping someone here can give me some advice please.
I bought my son a new carrier unlocked HTC Sensation XL. It came with Android 2.3.5 (Gingerbread). For the first week it worked perfectly. A message popped up saying there was an update and did he want to install it. He left it on all night with Wi-Fi enabled. Next morning it said update successfully completed and to restart the phone (which he did).
The first most obvious thing he noticed was the interface had changed. I checked the settings and found it had updated to ICS 4.0.3. This is when the problems started. The phone began to restart over and over.
In desperation we tried removing the battery and doing a factory reset. It made no difference. Once the phone was on for about 20 seconds it would restart and not stop until we turned off the phone or the battery went dead.
We even tried the hard reset as suggested by HTC support but no change.
Any suggestions as to how we might fix this?
Is there any way we can get the phone to reset back to 2.3.5 or do we have to send it back to where we bought it from?
cheers
You can download suitable gb and ics roo and flash first back to gb and then to ics:
http://forum.xda-developers.com/showthread.php?t=2128104
AlluXX said:
You can download suitable gb and ics roo and flash first back to gb and then to ics:
http://forum.xda-developers.com/showthread.php?t=2128104
Click to expand...
Click to collapse
Would require rooting the phone and installing recovery? The phone is still under warranty but as it was bought online I was hoping not to have to send it back. At the moment it is still stock and I'd prefer not to to do anything that will void warranty.
cheers
heywheelie said:
Would require rooting the phone and installing recovery? The phone is still under warranty but as it was bought online I was hoping not to have to send it back. At the moment it is still stock and I'd prefer not to to do anything that will void warranty.
cheers
Click to expand...
Click to collapse
Nope... Just download compatible roo and flash it.
Maybe something just went wrong at your ics isntall..
AlluXX said:
Nope... Just download compatible roo and flash it.
Maybe something just went wrong at your ics isntall..
Click to expand...
Click to collapse
Sorry but I'm new at this. I know how to flash a ROM through CWM in recovery mode but no idea about how to do it is a completely stock phone.
Could you point me to how it is done please?
cheers
heywheelie said:
Sorry but I'm new at this. I know how to flash a ROM through CWM in recovery mode but no idea about how to do it is a completely stock phone.
Could you point me to how it is done please?
cheers
Click to expand...
Click to collapse
Well first of all you need to know what your cid is and download right ruu/stock rom.
Then just plug your phone in to computer when fully rebooted(usb-debug on) and run downloaded gingerbread exe.
AlluXX said:
Well first of all you need to know what your cid is and download right ruu/stock rom.
Then just plug your phone in to computer when fully rebooted(usb-debug on) and run downloaded gingerbread exe.
Click to expand...
Click to collapse
So I should get the Gingerbread RUU not the ICS?
heywheelie said:
So I should get the Gingerbread RUU not the ICS?
Click to expand...
Click to collapse
If you can find the right ones, download both.
Sent from my HTC Sensation XL with Beats Audio X315e using xda app-developers app
Exactly, first back to GB and then again update to ICS. Maybe you could use one of these to make it a bit easier.
http://forum.xda-developers.com/showthread.php?t=2093082
http://forum.xda-developers.com/showthread.php?t=1865265
Many thanks guys. I appreciate the help.
cheers
If you have debugging enabled just get adb for your computer, open command line, cd to the directory of adb the execute 'abd getvar cid' and get your cid, then go online and find the ruu that suits your cid and phone, the run it on windows and just follow the prompts!
And done!
Hi guys i flashed a rom of Mokee (For mb886 but date after 01/07), I ignore the status 7 error on recovery using notepad++ and modifying the script file (my whole fault). So i flashed the rom and doesn't work so i restore a nandroid backup and when i connect my phone to pc or CA it doesn't work, no charge, no storage mode, nothing. So, what can i do to fix this issue? hope can u help me guys, i'm afraid of this Sorry for my bad english.
Is the phone recognized in fastboot mode? If it is, you can try and flash a stock ATT, Bell, or Mex Retail ROM.
audit13 said:
Is the phone recognized in fastboot mode? If it is, you can try and flash a stock ATT, Bell, or Mex Retail ROM.
Click to expand...
Click to collapse
Hi, yes it is recognized, you mean with RSD Lite?
You can use Myth Tools or RSD lite.
audit13 said:
You can use Myth Tools or RSD lite.
Click to expand...
Click to collapse
Thanks man, I'll try
Any luck?
audit13 said:
Any luck?
Click to expand...
Click to collapse
I have not tried yet, but when I do, I tell you
audit13 said:
Any luck?
Click to expand...
Click to collapse
Tried with RSD but still doesn't work
ErickST18 said:
Tried with RSD but still doesn't work
Click to expand...
Click to collapse
You mean RSD Lite didn't install the ROM or you installed the ROM and USB port still doesn't work?
audit13 said:
You mean RSD Lite didn't install the ROM or you installed the ROM and USB port still doesn't work?
Click to expand...
Click to collapse
I installed the ROM with RSD Lite but usb port still doesn't work :S ... Would Myth tools make any difference?
ErickST18 said:
I installed the ROM with RSD Lite but usb port still doesn't work :S ... Would Myth tools make any difference?
Click to expand...
Click to collapse
No Myth shouldn't make any difference.
Which stock ROM did you install? If you installed the ATT, you could try the Mexico Retail or Bell too.
audit13 said:
No Myth shouldn't make any difference.
Which stock ROM did you install? If you installed the ATT, you could try the Mexico Retail or Bell too.
Click to expand...
Click to collapse
Only tried with ATT and Bell, no sucess
ErickST18 said:
Only tried with ATT and Bell, no sucess
Click to expand...
Click to collapse
The ROM boots? So you can charge it with a wall charger but not your computer, right?
It's strange because it works to transfer data.
audit13 said:
The ROM boots? So you can charge it with a wall charger but not your computer, right?
It's strange because it works to transfer data.
Click to expand...
Click to collapse
yep, the ROM boots, but no, neither wall charger works. No AC, no data transfer, no charge with pc. Nothing seems to work with it, i'm getting crazy. The only thing that works is run into fastboot and pc recognize it as fastboot mode.
ErickST18 said:
yep, the ROM boots, but no, neither wall charger works. No AC, no data transfer, no charge with pc. Nothing seems to work with it, i'm getting crazy. The only thing that works is run into fastboot and pc recognize it as fastboot mode.
Click to expand...
Click to collapse
After flashing a stock ROM, try flashing the latest version of CWM and see what happens.
I used RSD to flash back to stock Bell ROM and it would always hang at the Motorola logo. Once I flashed the latest CWM, the phone started to work. Maybe CWM will help in your situation too.
audit13 said:
After flashing a stock ROM, try flashing the latest version of CWM and see what happens.
I used RSD to flash back to stock Bell ROM and it would always hang at the Motorola logo. Once I flashed the latest CWM, the phone started to work. Maybe CWM will help in your situation too.
Click to expand...
Click to collapse
I will try, i hope so... Thanks for your time bro, i'll notice you once installed cwm.
q
ErickST18 said:
Hi guys i flashed a rom of Mokee (For mb886 but date after 01/07), I ignore the status 7 error on recovery using notepad++ and modifying the script file (my whole fault). So i flashed the rom and doesn't work so i restore a nandroid backup and when i connect my phone to pc or CA it doesn't work, no charge, no storage mode, nothing. So, what can i do to fix this issue? hope can u help me guys, i'm afraid of this Sorry for my bad english.
Click to expand...
Click to collapse
Your fault repaired yet，i have the same trouble.can you help me
acecombat3 said:
Your fault repaired yet，i have the same trouble.can you help me
Click to expand...
Click to collapse
yes, i've repaired this problem. I made a backup of all blocks partitions from another Atrix HD and restore this backup on my device and this solve the issue
ErickST18 said:
yes, i've repaired this problem. I made a backup of all blocks partitions from another Atrix HD and restore this backup on my device and this solve the issue
Click to expand...
Click to collapse
Do you used recovery restored? can you send the backup to me? thank you.
[email protected]
or upload skydivce and tell me the link
acecombat3 said:
Do you used recovery restored? can you send the backup to me? thank you.
[email protected]
or upload skydivce and tell me the link
Click to expand...
Click to collapse
Sure bro, as soon as i can i will upload it and tell you how to do it. I'm on work right now. Glad to help