Related
Hi guys,
i've got a problem here. I'm running Darky's 9.2 and it has suddenly stopped working. Pulled the phone of my pocket and it looked like it was booting, but it just kept booting. When i connect it to power it just displays the battery and the spinner for a few seconds and then the screen goes black again and the process repeats over and over. Just tried to connect it to Odin to go back to stock. I can go into download mode, but only for a few seconds. It won't stay in download mode. Any help?
try do a full reset in recovery.. then leave the battery out for 5-10 mins. then try download mode again
I can't get into recovery.
Volume up + home + power doesn't work.
I've left the battery out for over an hour. Still nothing...
same thing happend to me when i was on darkys 8.1 these thing happen when your using custom roms can you get in to download mode so you can reflash to stock rom
Only for a few seconds. After that it does the battery thing again.
Looks like you need the jig or to take it to a service centre but they may well charge as its out of warranty .
jje
The jig? Afraid so yeah
laurensthoeng said:
I can't get into recovery.
Volume up + home + power doesn't work.
I've left the battery out for over an hour. Still nothing...
Click to expand...
Click to collapse
In the past I would get into recovery that way but now on custom rom I need to release the power button when the galaxy s logo appears. Maybe give that a try.
Sent from my GT-I9000 using XDA App
I did, doesn't work.
It also never really shuts down. It just keeps booting.
If i remove the battery and plug it back in after a while it automatically starts the loop again.
Hi Everyone;
I unlocked my phone for flashing custom rom. After unlocking i reebooted it and was normal. Then i flashed cwm via htc one toolkit. It was successfull as well. Then i go to cwm and made factory reset + wipe cache + dalvik cache. Then i go to install zip from sd card but i could not find my rom file. Thought, it was deleted while unlocking device. Then decided to reboot phone again to copy rom file into the phone and reboot.
But, when i rebooted phone from cwm, it stuck on HTC Logo( Quietly Brilliant screen). Waited sometime, but nothing happened. Then i tried to power off it and boot into bootloader or recovery. I press and hold power button but it does not respond anyhow. When i am holding power button ,back and home buttons are blinking but nothing happens. Almost five minutes i waited as holding down power button but phone does not power off anyhow. i tried all methods like vol down + power, vol up + power and both volume keys + power. But really nothing happens, just blinking back and home buttons. That's all.
I can not simply power off device. :crying:
I also tried boot device via fastboot commands but it says "waiting for device" means computer does not recognize device.
Guys, i need an urgent help. Please...
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
skinsfanbdh said:
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.
Blue_Shine said:
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.
Click to expand...
Click to collapse
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps
Good to hear that i am not the first person That means somehow there is a solution i beleive. Still waiting for battery die. even i had 50 percent battery at the begining but still it holds on I never say again htc battery is bad
I exeprienced that stucking on boot logo several times before with my other htc phones but holding power + vol down/up worked always. This is the first time for me that i faced with power button can not power off device.. Well, ,i hope i wish i can handle out this problem. Definetley with your help.
Regards,
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
Did you read the other posts in this thread? The way you do a "battery pull" on this phone is to HOLD the PWR + VOL DOWN button for ~15seconds. Your capactivie buttons will blink, too. On my device, it took exactly 15seconds to reboot. There have been some reports of some phones that get so stuck that you just have to wait until the battery dies and charge it back up.
Alternatively, if the computer is recongizing it, try to adb reboot recovery to try and get into the recovery.
Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader
skinsfanbdh said:
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps
Click to expand...
Click to collapse
hi again. this morning my battery finally out. Then i put my phone to the charger and started it in fastboot mode( that is a good new) Then i left it for 20-30 minutes to charge a little bit for flashing custom rom.Then i went to recovery and started adb sideload. Sideload was succesful and finally came to aroma installer of trickdroid. I chose my installation options and started to flash rom but process was frozen on 10 percent. It was saying unmount system, unmount cahce and both of them has notification as "already unmounted". But installation was not going on. Then again i tried to go back fasboot mode again by press and holding power+vol down but unfortunatelly lights are blinking but nothing happens again. I think i need to wait to battery die again.
Isn't it quite weird? Why power+vol down combination does not work for me anytime? So, do i need to wait for battery die in every frozen? Do you have any ideas or comments ?
Do i need to go back to stock first ?
EDIT : Battery was out again and i tried once more. This time installation (trick droid) was successful but it frozen at the end this time. And unfortunatelly i can not restart (power+vol down) it again again Holy crap, i am really pissed off with this problem.
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Guide me with steps please
Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Hi, I have the same problem now and I let my phone die but when I put it to charge and try to go in bootloader, it's doesn't go and gets stuck at the logo again.
Would you please guide me with the steps how u fixed your phone?
Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Do u fix it,i have same problem.on Zenfone max.after successfully rom installation i reboot my phone thn it stuck on resurrection remix logo,then i go into recovery,and mount the stock image without wiping.then twrp showed that image installation successful.thn i reboot it in recovery but it stuck on asus logo.what can i do right now?
Fix it
skinsfanbdh said:
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader
Click to expand...
Click to collapse
Today i fixed it via asus flash tool.with the right steps it can be flash to stock with no problem
What should I do if I can't even get to the boot screen? I tried holding down the power and volume up buttons, but it just restarts and goes back to the same HTC load screen, what do I do????
Hey Guys. this is my first time posting something.. but i really need you guys help.....
Ok week ago i installed stock rom V3 for MMX A250 using CWM, it worked just fine after flashing but yesterday i did factory reset and after that my phone kept restarting and at first it would turn off and turn back on till MMX logo and again it would go back off, so i left it for an hour so to let the battery drain off but now when i try to turn it back on....the screen light up for 1-2 second and again it goes back off.
It tried to go to recovery but when ever i click power button to select recovery mode, nothing happens and goes back to that on-off situation. Itried to connect it to pc but because of ON-Off situation, it keeps disconnecting.
So guyselp me out..... please help me out.........
hellcrook said:
Hey Guys. this is my first time posting something.. but i really need you guys help.....
Ok week ago i installed stock rom V3 for MMX A250 using CWM, it worked just fine after flashing but yesterday i did factory reset and after that my phone kept restarting and at first it would turn off and turn back on till MMX logo and again it would go back off, so i left it for an hour so to let the battery drain off but now when i try to turn it back on....the screen light up for 1-2 second and again it goes back off.
It tried to go to recovery but when ever i click power button to select recovery mode, nothing happens and goes back to that on-off situation. Itried to connect it to pc but because of ON-Off situation, it keeps disconnecting.
So guyselp me out..... please help me out.........
Click to expand...
Click to collapse
first charge your phone and then flash rom again.
i connected it to wall charger and kept it for like 4hours, the screen was off, so i connected it to pc it keep getting connects and disconnects, but the screen is off.
need help
FSadino said:
first charge your phone and then flash rom again.
Click to expand...
Click to collapse
hi itried to install twrp through sp flash tool but instead of using mt6589 scatter.txt i used mt65xx scatter.txt now my phone is stuck on rebooting plz help
Alright guys... Try hard reset... What you must do is get your phone to off... Once it's off properly wait for about 40-45 seconds and then press the power button and both the vol buttons simultaneously... Then there will be an option for vol up-go to recovery & vol down-go for factory reset
it happened to my A250 too. i tried all the above method yet no result...still stuck at boot loop. plz help .
Hi,
I installed the ROM: http://forum.xda-developers.com/canvas-turbo/development/pxz2-4-3-7-purexperia-z2-a250-clones-t2866549
however when trying to go back to stock rom I used the CWM recovery and used the "wipe all" function.
to put the zip of the stock room did not work , and restarted the device. After that the phone went into infinite loop boot and not entered in the CWM recovery.
I tried this procedure : http://gujnaukari.blogspot.com.br/2014/02/how-to-update-stock-rom-on-micromax.html
but I was wrong , instead of clicking on " Download " I clicked on " Firmware - > Upgrade" and after that the phone will not turn on and it is not recognized by SP Tool.
Help me
Thank you
I think I am in the same boat. I have a 16GB version that I put KitKat on tried to go back to the 4.2.1 rom and now its stuck in a boot loop and will not hold a charge. Windows doesn't recognize it anymore.
So riddle me this. Phone dies, does... Will not power on, will not stay powered off to charge enough to even be able to power on. So it was stuck in a power cycle loop while plugged in. But would never stay on long enough to get into recovery. I ended up leaving it unplugged for about a week or so then plugged it back in for heck of it and bam. Damn thing started to hold a charge. I don't know why. But plugged it right into the charger and on the screen came up the same battery charging icon I had seen before while it was power cycling. Let it sit for a day on the charger and it fine now.
dunno...
i need help, a few days ago my phone freezes, shuts down, and wont back up again.
i tried all button combinations and nothing seems to work at all,pressing volume up + down and power button only result on a red light flash once
This isn't the first time my phone freeze, last month i exprience a hard crash and a bootloop, but i flashed it through edl mode and it works again.
this time it wont even boot up at all,i hit a dead end.
i tried to use an edl cable but it still didnt work, the only way to access the edl mode is to short the test point inside the phone.
that method works, i manage to get in edl mode, reflash everything, but the phone still wont boot up.
also all the hardware is fine, i checked everything including the ufs and it works just fine.
but for some reason it wont charge at all on both the side, and the bottom port.
if i leave it for a while and then charge it, i get a blinkin red light for a while and then it stops flashing again.
if anyone can provide help i would be very thankfull
summary : i successfully flash the phone, but it wont boot up, and also wont charge for some reason. it still getting some current going in, but not much.
My phone suddenly died few months ago and helped for me flashing kernel and at that time, the newest rom version of rom
CRYPTfromCATACOMBZ said:
My phone suddenly died few months ago and helped for me flashing kernel and at that time, the newest rom version of rom
Click to expand...
Click to collapse
if i may ask, does your phone still able to get into fastboot at the time ?
no it was completely dead - so i tried to press power button for long time nothing happened, so i left it and after a few hours i put it in charger and tried power on, then it booted,,, After that i did factory reset, falshed the newest rom + kernel and (knocking on wood) it never happened again