Database Develop

[FIX] Google Maps & CM 6.1 Multitouch Rotate

Nandroid backup, flash, reboot.. should work!
Enjoy. All I did was pack up the CM fix.
crondable said:
This also fixed the lack of multitouch on the Gingerbread keyboard for me. Thanks!
Click to expand...
Click to collapse
MD5SUM:
262faac0793c2162a4d6de953a1a7d5d cm6.1-multitouch-fix.zip
http://forum.cyanogenmod.com/topic/12639-rotate-on-maps/
(Go there if you want to do it yourself, i.e. adb push or root explorer)
Androidnite said:
I was looking here: http://review.cyanogenmod.com/#q,status:merged,n,z
Item I5b0c66cb, Incredible: fix Google Maps 5.0 two finger rotation. It says it was merged Dec 16. I flashed 184 last night, will try to test it out today. Was there any other issue with Maps?
Click to expand...
Click to collapse
Seanzer said:
D'oh they did fix it. My guess is it didn't sync with the build bot for #184.. I bet #185 will have it. Nevertheless, the fix is here for 6.1 stable users.
Click to expand...
Click to collapse

flashed the zip, worked wonders.

Maybe I'm just "special" but I didn't know there was a way to rotate with multi-touch. I installed the latest nightly, flashed this file... now what do I do?
Thanks!

Any idea if this would work on MIUI?

cokm4n said:
Maybe I'm just "special" but I didn't know there was a way to rotate with multi-touch. I installed the latest nightly, flashed this file... now what do I do?
Thanks!
Click to expand...
Click to collapse
It's in apps like google maps 5 which allow you to rotate the map using multitouch.
Sorry for the confusion.
Also, it might work for MIUI. There's nothing special about the fix.. it just adds permissions for the discrete multitouch interface.

works with nightly 174.

i flashed to miui, doesnt appear to have changed anything?

Thanks a lot for this. Works great.

That did it!
Thanks!
Sent from my Droid Ostentatious

Confirmed working on nightly 184.

flawless with Stable 6.1 thank you

The 3d viewing multitouch doesnt seem to be working for me and i am running the most recent nightly build. Is there a special setting that needs to be activated or something i am missing?

Gosh dammit. I ran this from Nandroid Recovery. My phone boots all screwed up now with an endless wave of force closes of any and all apps. Can't use LauncherPro, only ADWLauncher. Son of a b____!

seanzer said:
Nandroid backup, flash, reboot.. should work!
Enjoy. All I did was pack up the CM fix.
http://forum.cyanogenmod.com/topic/12639-rotate-on-maps/
(Go there if you want to do it yourself, i.e. adb push or root explorer)
Click to expand...
Click to collapse
The attached zip you gave in the main message caused my phone to go into a continual force close once the phone boots. All apps are force closing on the screen and a middle eastern song started playing initially. UGH!

No issues so far with nightly #177. Thanks!

iamsupreme said:
Gosh dammit. I ran this from Nandroid Recovery. My phone boots all screwed up now with an endless wave of force closes of any and all apps. Can't use LauncherPro, only ADWLauncher. Son of a b____!
Click to expand...
Click to collapse
iamsupreme said:
The attached zip you gave in the main message caused my phone to go into a continual force close once the phone boots. All apps are force closing on the screen and a middle eastern song started playing initially. UGH!
Click to expand...
Click to collapse
Yikes! I did stress to back up.. you never know what can happen.
Well I'm not sure what to say.. the update has worked fine on many phones (even a moto droid).. so I'm sure it works.
I don't know where the middle eastern song could have came from. The zip only contains an update-script and the fixed xml file.
If you guys can give me some more info, rom, updates, some possible causes.. maybe I can help you. I'm going to post the md5sum, so maybe you guys can double check that the file downloaded all the way. I'm not here to make malicious posts.. so something else must have happend..

seanzer said:
Yikes! I did stress to back up.. you never know what can happen.
Well I'm not sure what to say.. the update has worked fine on many phones (even a moto droid).. so I'm sure it works.
I don't know where the middle eastern song could have came from. The zip only contains an update-script and the fixed xml file.
If you guys can give me some more info, rom, updates, some possible causes.. maybe I can help you. I'm going to post the md5sum, so maybe you guys can double check that the file downloaded all the way. I'm not here to make malicious posts.. so something else must have happend..
Click to expand...
Click to collapse
It's my own fault for not creating a backup first. I thankfully did a full backup on 12-15 so I'm restoring that now (after doing a full wipe).
I'm running CM 6.1 stable, Invisiblek #17 AOSP kernel. I don't think you're creating a malicious post. Who knows where the problem lies. It could have been anything and just triggered with the fix you posted. I'll let you know how it goes after the restore.

jland22 said:
The 3d viewing multitouch doesnt seem to be working for me and i am running the most recent nightly build. Is there a special setting that needs to be activated or something i am missing?
Click to expand...
Click to collapse
I was running 6.1 stable. After flashing over with the 184 nightly, rotate didn't work for me either. Restored back to 6.1 and applied this fix, and now it's working fine.
I've flashed over many nightlies with no issues, always assuming all of the fixes were in place. Do the changes in the nighties only completely apply with a full wipe? Do some of them not apply with a flash over? Actually in this case it appears they don't. That is concerning...

oturn said:
I was running 6.1 stable. After flashing over with the 184 nightly, rotate didn't work for me either. Restored back to 6.1 and applied this fix, and now it's working fine.
I've flashed over many nightlies with no issues, always assuming all of the fixes were in place. Do the changes in the nighties only completely apply with a full wipe? Do some of them not apply with a flash over? Actually in this case it appears they don't. That is concerning...
Click to expand...
Click to collapse
The updates do apply on a flash over. The merge wasn't synced with the buildbot yet.. so probably won't work until 185

seanzer said:
The updates do apply on a flash over. The merge wasn't synced with the buildbot yet.. so probably won't work until 185
Click to expand...
Click to collapse
Thanks for clearing that up.

[Q] CM 7.1 with all the goodies

I'm having a problem installing CM 7.1 and all the speed/memory tweaks. Ive used MANY different roms with alot of tweaks but this one i driving me crazy. Im trying to install CM 7.1 in CWR 2.5.0.7 with the following tweaks...Firerats 1.5.9 auto patcher and KERN 2.6.35.14-10sept-v1 .....the problem is that i can not get it to boot!!!! if i dont install firerats the rom doesnt boot and goes back to CWR...if i do install firerats the screen just hangs on the htc logo...but without the tweaks CM7.1 boots fine
Please help!!

I did the following with success (this is from memory, hopefully I don't miss anything), I'm using firerats 1.5.8. I did not use a single fr patcher.
First, I flashed the firerats REMOVE zip, just to make sure I was really starting over. then flashed the latest CWM unofficial recovery...5.0.2.6.
rebooted to recovery after each step above though, and repeated wipe data/factory reset, wipe cache.
for firerats, had the mdpartmap settings at 125, 20 (just being extra cautious there, I'm seeing some lower numbers bandied about).
Anyway, from the pretty blue recovery screen, I then flashed fr-recovery, (I think it tells you to reboot to recovery again when done, possibly wiping again, anyway, it tells you) then flashed cm 7.1, gapps, kernal, and finally, fr-boot.
Seems I've heard of folks having some difficulty if they don't use a newer recovery, perhaps others can chime in on this.
After some initial settling in and reboots (it was a little hot at first, a few things were a little flakey), everything seems to be running great. I've only had it on here a few days, and I have not tweaked any performance settings, but so far, gps has been rock solid (isn't this ALWAYS a sticky point for some?) and runkeeper has stopped being so crash happy. Need to see how these things behave with age. A clean installation fixes a lot of things for awhile.

Okay, fired up gps status app, and boom, reboot. But like I said, haven't tweaked any performance settings, left everything at defaults. Will tinker eventually.

wow!!! thank you so much for the very fast reply. I am at work at the minute but i am going to try this ASAP!! Thanks again.
I will keep you informed as to how this worked out. Looks like it should work though

Ok thats awesome!! i got it all to work but i can not get android market to work. I just get FC everytime.
Is there a fix for this?

verybigleen said:
Ok thats awesome!! i got it all to work but i can not get android market to work. I just get FC everytime.
Is there a fix for this?
Click to expand...
Click to collapse
Hmm, not sure, did you use the gapps from the OP for CM7.1? Could try redownloading that and flashing it again.
also, what were your firerat settings in the partmap file? Just checking, in case you didn't use mine, which were generous, as I said.
That rather larger second number in the partmap file resolves a lot of market issues, I never have to apply any "market fixes"

My fault. I used 125 2 in the mtd instead of 125 20....worked great!!! now i can use the market...thank you so much!!! just have ooooooonnnneeeeee other small problem.
Now by busybox wont work. Keep saying no root access when obviously i do...and also i can not fix permissions in rom manager..theres always a problem eh.
Hope you can help...you've been great so far!!! got loads more internal space now

Hrm...I have to admit to never using busybox, at least not directly, I usually just install it if asked when I install/update Titanium Backup (after checking the allow unknown sources in applications settings). Are you trying to execute busybox from terminal or something? Apologies if you tried this but if you have Titanium (you should if you don't), then do this:
Go to titanium backup, go to problems then it will install busybox
I just cut and pasted that from ... somewhere.
verybigleen said:
My fault. I used 125 2 in the mtd instead of 125 20....worked great!!! now i can use the market...thank you so much!!! just have ooooooonnnneeeeee other small problem.
Now by busybox wont work. Keep saying no root access when obviously i do...and also i can not fix permissions in rom manager..theres always a problem eh.
Hope you can help...you've been great so far!!! got loads more internal space now
Click to expand...
Click to collapse

So I finally figured it out. I downloaded the cm nightly instead of stable and everything worked great.
Thank you so much for your help!!!
Sent from my HERO200 using XDA App

Just wanted to say. Just installed the new cm nightly and the new jaybobs kernal ....amazing...the new kernal is super fast and every body should use it! Its the Oct 22 build..I'm flying now
Sent from my HERO200 using XDA App

CM 7.2 release candidate

http://www.cyanogenmod.com/blog/cyanogenmod-7-2-0-rc1-is-upon-us
It’s been a long time in the making, but it’s finally here: CyanogenMod 7.2, the latest version based on Android 2.3(.7), has reached the release candidate stage!
We’ve been delaying it for too long, mostly because new devices kept being submitted to us, and now we feel that at 69 70 devices, CM7.2 is more than ready for everybody to enjoy
7.2 adds a couple of backported features and fixes from Android 4 (ICS), over 20 new devices when compared to 7.1, and even some new features to boot (be sure to check out the new predictive contact search in the phone dialer!). We’ve also fixed some bugs along the way. Some of them device-specific, others that affected everybody, and one in particular that’s been plaguing Android for a long time: the mysteriously vanishing SD-card ringtones are no more! You can check the full list of noteworthy changes at the CHANGELOG.
As usual, you can submit bug reports on these builds: if you find anything broken in your device while running CM7.2-RC1, (as downloaded from our mirrors or ROM Manager! Please do not submit reports if your build came from elsewhere), be sure to submit a report through http://code.google.com/p/cyanogenmod/issues/ , so that we can fix it in time for the final 7.2 release.
from Cyanogenmod Blog

What are the significant differences between this official CM7.2 and the unofficial CM7.2 KANG that we have been using in the last couples of months?

Excuse a noob, but is this file good for SD as well as emmc installs?
thanks

Assuming you have already got a flavor of cm7 installed on an SD card you can copy the update file to the boot partition (I did it from my PC with a card reader), then insert the card in your NC and either access your boot menu and select Reboot Recovery or boot normally and then Reboot with the Recovery option. The files unpack and the penguin is displayed. The unit shuts off and you have to restart (seems to take forever with the android boot animation but wait it out) and all should be well.
Sent from my NookColor using Tapatalk 2 Beta-2

votinh said:
What are the significant differences between this official CM7.2 and the unofficial CM7.2 KANG that we have been using in the last couples of months?
Click to expand...
Click to collapse
KANG 03042012, the latest, *has* CM7.2RC1 so the differences are detailed in that thread but boil down to mr666's enhancements.
For instance, I get the impression from your sig that you run Dalingrin's as a separate update. Dalingrin's has been a part of M-K,(one of the above mentioned enhancements), for a while now.

MISRy said:
KANG 03042012, the latest, *has* CM7.2RC1 so the differences are detailed in that thread but boil down to mr666's enhancements.
For instance, I get the impression from your sig that you run Dalingrin's as a separate update. Dalingrin's has been a part of M-K,(one of the above mentioned enhancements), for a while now.
Click to expand...
Click to collapse
Phrrrrrrr??? What???
Forgive me but what are you talking about?

votinh said:
Phrrrrrrr??? What???
Forgive me but what are you talking about?
Click to expand...
Click to collapse
Glad you said it, so I didn't have to show my ignorance

I was happy to see that 7.2 fixed the magazine stacking in the Nook App. I have the official and the M-K running on different NCs and they're running great!
Sent from my Eclipsed & V6Supercharged DROID BIONIC using Tapatalk

Sherip said:
The unit shuts off and you have to restart (seems to take forever with the android boot animation but wait it out)
Click to expand...
Click to collapse
I tried to update but I can't even get to the boot animation. It shows CM is loading, flash of light, then goes black. Time for a fresh install I guess.

bp_ said:
I tried to update but I can't even get to the boot animation. It shows CM is loading, flash of light, then goes black. Time for a fresh install I guess.
Click to expand...
Click to collapse
Took awhile even to get to the animation, you may have given up too soon.
I like the update, have noticed improved battery life, nice colors and screen transitions. I have twice had a glitch where it wouldn't wake up after sleeping (twice in the last few days). Hope that doesn't persist.
Sent from my NookColor using Tapatalk 2 Beta-2

libertus77 said:
I was happy to see that 7.2 fixed the magazine stacking in the Nook App. I have the official and the M-K running on different NCs and they're running great!
Sent from my Eclipsed & V6Supercharged DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
Actually it didn't. It's that Nook for Android released a brand new version that fixed the magazine issue. A week prior the older version still stacked all the magazines on top of each other on my 7.2 build.
How do you know if you have the latest version of the Nook app? Download some comic books, it's the first version that supports Nook Comics.

SeaFractor said:
Actually it didn't. It's that Nook for Android released a brand new version that fixed the magazine issue. A week prior the older version still stacked all the magazines on top of each other on my 7.2 build.
Click to expand...
Click to collapse
Hmm. But is the newer version not stacking on 7.1 either? I'm curious, but not enough to flash back to test, I don't think. I just had a friend switch to 7.2. A few days ago specifically because of the stacking, so that would be a good coincidental timing. Anyone still on 7.1 that can check?
Sent from my Eclipsed & V6Supercharged DROID BIONIC using Tapatalk

libertus77 said:
Hmm. But is the newer version not stacking on 7.1 either? I'm curious, but not enough to flash back to test, I don't think. I just had a friend switch to 7.2. A few days ago specifically because of the stacking, so that would be a good coincidental timing. Anyone still on 7.1 that can check?
Sent from my Eclipsed & V6Supercharged DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
I had rotated out of 7.1 awhile back and I use B&N app everyday. When they provided the new update for the app, that is when my magazines stacked correctly. The update was actually made for the tablet and the version of the new update is: 3.1.0.19.ANDTBL (and tablet). I updated when it came out and it fixed it immediately. I would think it would still work correctly on 7.1, but like you, do not want to mess with a good think.

Okay, curiosity was bugging me. I tested, and yep, no stacking on 7.1 either, guess it was a B&N fix. 7.2 is good in any case.
Sent from my Eclipsed & V6Supercharged DROID BIONIC using Tapatalk

I did a new install to SD card with the CM7.2RC Most things work as should. Biggest issue is that after some point, the unit will not accept a charge. I plug the cable in (NC Cable/charger) and the light on the cable goes straight to green. Leaving it plugged in for awhile doesn't change the amount of charge (actually is discharging per normal use). After a power off and re-boot, all works as normal. Not sure what the trigger is that causes the Nook Color to not take a charge, but it is not locked up, all programs work normally. It will take a charge and discharge-lets say over a few days, then at some point will not allow a charge. Battery % meter seems to be accurate; tracking appropriately.
I also have a Nightly (#75 I think) SD card that I use, as well as stock Rooted 1.1 on EMMC, and neither have this issue, device is fine electronically.
Any ideas?
Thanks, Mark

Are you sure it's not the cable? They have a bad habit of going south on us.

CM7.0.3 to CM7.2 non rooted on SD card
Hello,
I'm a noob here and found that I should ask questions here on the general forum and not the developers forum.
I have very recently created a sd card non rooted using CM7.0.3 encore and have kernel version 2.6.29-omap1 and its Android version 2.3.3.
I want to keep the ability to return to B&N mode from internal memory to keep my warranty from B&N in check.
I have had issues with using the Google Market app and don't see a lot of apps that I would normally see on my Droid Bionic...like Facebook and others. I have hacked around that issue by finding apps and manually installing them as a work around which is fine for now.
A couple of questions?
By going to a nightly version...can I still remain non-rooted and keep emmc stock and intact with B&N Color flash and boot from my sd card?
will this fix my Google Market issues and have more applications that I can see?
Will I be able to just drag the new CM7.2 ??version code to my /boot directory on my sd card and go into recovery mode to boot it in?
Does this new CM7.2 ??? get put in a particular partition or just under the /boot directory?
Will this wipe out my apps or any data on my sd card?
Will this CM7.2 ??? version support USB host mode for a USB webcam for Skype?
Apparently, this opens another can of worms in that I need to provide USB power from an external hub and I need some kind of Nook Tweaks app to adjust settings?
Can someone explain this?
I have searched these forums and I must say spent a lot of time and nothing seems to be in one place or current on pre-requisites.
Should I get a second sd card to practice on so I don't wipe out my bootable CM7.0.3 version
Any help here would be GREAT!
Thanks in advance!
BB

I'm in a similarsituation as BeaconBob. The following applies to me as well.
BeaconBob said:
... using CM7.0.3 encore and have kernel version 2.6.29-omap1 and its Android version 2.3.3.
A couple of questions?
Will I be able to just drag the new CM7.2 ??version code to my /boot directory on my sd card and go into recovery mode to boot it in?
Does this new CM7.2 ??? get put in a particular partition or just under the /boot directory?
Will this wipe out my apps or any data on my sd card?
Should I get a second sd card to practice on so I don't wipe out my bootable CM7.0.3 version
Any help here would be GREAT!
BB
Click to expand...
Click to collapse
I set up my 8GB card months ago and have forgotten all the details of flashing a ROM. Thanks for any suggestons/help.

Make sure your screen density is set to 180. Clear market cache and data, reboot, and try again.

If you don't want to spring for a new Sandisk class 4 card -- I have five now ) -- just use your Win32Disk Imager to write an image file of your current setup to your computer and go blithely on experimenting like crazy. You will always have an image file to write back to your freshly formatted sd card to take a giant leap backward. But I'd bet you'll never even use it. It's too much fun going forward.
And it never hurts to have a zipped backup of the Titanium BU files available to upload and restore at various stages.
Currently running a racks triple boot, the latest Kang cm7, a dualboot miui/stock, and somewhere I could swear I had an old 253m from back in january. Just so my NC flap doesn't break, I'm good...

[Rom][7-4-12][ZV9]Broken Out Revo 2.0 w/ BlitzKrieg Kernel

Hello all! Here it is Broken Out Rom for the LG Revolution!!! It has been fully cleaned out to decrease size and to increase speed. It will continue to be a work in progress! I hope you all enjoy!!!
What is this?
This is a very lightweight rom built both for speed and stability. This rom is based off of the latest LG update to Gingerbread 2.3.6. It is fully deodexed, and debloated. Almost all of LG has been replaced and as time goes by, I hope to remove the rest. Swype has also been changed to the newest Beta. A few items have been replaced with AOSP versions to increase speed and decrease size. Also included is the appwidgetpicker to clean that up.
Click to expand...
Click to collapse
Changelog
v 2.0
Rom:
Updated to ZV9
Updated all Apps
Updated Super User and SU Binary
Sony Xperia S Theme
Replaced Calculator, Calender, and Email with CM7 Versions
Added a Modified Spare Parts DSP Manager and CM File Manager
Cleaned Up Browser Bookmarks
I'm sure there is a lot more I am forgetting lol
Kernel:
Overclocked to 2.1 Ghz (Does not mean your phone can handle it)
Added Smoothass and Smartass2 Governors
Added SIO I/O Scheduler
Added 2 Way Call Recording
Many Other Speed Mods
v 1.1
Fix Problem With 3G
v 1.0
Rom:
Based Off of ZV8 Gingerbread
Deodexed
Zipaligned
Heavily Debloated
Debinged the Browser
Debinged
Remapped Long Press Search For Google Voice Search
Remapped VM Button in Dialer to Google Voice
Custom Boot Animation
AOSP Lockscreen
Power Menu Mod
Added CMScreenshot to Power Menu
Accurate Battery Mod
Center Clock Mod
Cleaned Up Notification Pull Down
Changed Low Battery Pop Up to 1%
CRT Screen Shut Off
Added ADW Launcher
Updated all Apps Including Google Play
Added AppWidgetPicker
Newest Swype Beta
Build.prop Tweaks
Init.d Tweaks
Loopy Smoothness Tweak
Added Sony Bravia Engine
Made My Own Host File From Several Sources to Block Ads
Blocked All CIQ Logs From Verizon and Google (Requires Reboot After Install)
Click to expand...
Click to collapse
Screenshots
Coming Soon
Click to expand...
Click to collapse
How do I install this?
Must be on ZV8 or ZV9 before flashing!
Otherwise you will have Sim problems!
1.) Download the .zip & make sure 4g is enabled.
2.) Place zip in external sdcard
3.) Back up
4.) WIPE DATA!!! (You do not need to wipe if already on BrokenOut!)
5.) Go to install zip from sdcard
6.) Select BrokenOutRevo2.0.zip
7.) Do not wipe data after flashing!!!
8.) Reboot!
9.) To Block CIQ Logs Requires Reboot After Initial Boot
Click to expand...
Click to collapse
Technical Info
This rom includes edits to several jar files, xml's and build.prop edits. As time goes more will be done.
Click to expand...
Click to collapse
Downloads
Rom
v. 2.0 http://d-h.st/hS7
v. 1.1 http://d-h.st/7ef
v. 1.0 http://d-h.st/2EA
Extras
v. 2.0.1 Patch https://dl.dropbox.com/u/54501789/Revo/BrokenOutRevo2.0.1Patch.zip
Backup Assistant https://dl.dropbox.com/u/54501789/Revo/BackupAssistantforBO2.0.zip
Click to expand...
Click to collapse
Special Thanks!!!
DRT054 for donating his old Revolution
majorpay for Long Press Search fix
Beamer9408 for the battery charge idea and the initial thought for center battery
Kane for the Clear button at bottom in pull down idea
"The Gang" for testing and keeping me entertained on irc, if you haven't been by you should!!!
Click to expand...
Click to collapse
Donations
For those that enjoy the work that I have done and would like to support my efforts financially through the donate to me button, any amount is appreciated, but all that I ask is that if you like my work, please hit the thanks button!!!
Click to expand...
Click to collapse

Downloading now, will flash after work. Let you know how it goes!

missing Sim card
Installed fine, but when I get to set up at the language selection it says it needs a Sim card to activate. I have a Sim card in there. Just in case, I removed it, replaced it and rebooted. Still asking for Sim card...any thoughts?

Damn the bad luck!
Got impatient, flashed this at work (step by step, not new to this). Got stuck at the LANG screen, combo'd past it, no SIM detected.
Fwiw, the build looks AWESOME from playing around in it. So quick at stock! Just cant use it as is. : /

Cal8192 said:
Damn the bad luck!
Got impatient, flashed this at work (step by step, not new to this). Got stuck at the LANG screen, combo'd past it, no SIM detected.
Fwiw, the build looks AWESOME from playing around in it. So quick at stock! Just cant use it as is. : /
Click to expand...
Click to collapse
how did you get passed the lang screen?

Just flashed it, problem it say searching for service and unable to get any signal, i rebooted still no luck then i try to switch to 3g but when i go in networks and try to change the networking application setting crashes and shutdown the setting window any ideas anyone.
Thx
Sent from my VS910 4G using XDA

pborner said:
Installed fine, but when I get to set up at the language selection it says it needs a Sim card to activate. I have a Sim card in there. Just in case, I removed it, replaced it and rebooted. Still asking for Sim card...any thoughts?
Click to expand...
Click to collapse
So wait until updated?
Mad respect mt for having this out so fast
Sent from my VS910 4G using XDA

pborner said:
how did you get passed the lang screen?
Click to expand...
Click to collapse
Go to the CM9 thread here in dev, go back a few pages. I think it was volume up, volume down, back, search. I know those are the keys but I may have the order wrong.
KC, I flashed my nandroid and intend to wait a bit. I tell you though, I'm excited. That ***** was fast! Lol!

Cal8192 said:
Go to the CM9 thread here in dev, go back a few pages. I think it was volume up, volume down, back, search. I know those are the keys but I may have the order wrong.
KC, I flashed my nandroid and intend to wait a bit. I tell you though, I'm excited. That ***** was fast! Lol!
Click to expand...
Click to collapse
I got a fix... try re flashing following all instructions, but DO NOT code through the setup lang. screen. Instead select english, allow the sim card to "activate" until it says it is already activated and you see continue with setup process. and then you can just home button, or back button to you homescreen and ta dah!.
I got it first try. lol super fast and sleek ROM mt... Looking forward to updated releases!

kcarden said:
I got a fix... try re flashing following all instructions, but DO NOT code through the setup lang. screen. Instead select english, allow the sim card to "activate" until it says it is already activated and you see continue with setup process. and then you can just home button, or back button to you homescreen and ta dah!.
I got it first try. lol super fast and sleek ROM mt... Looking forward to updated releases!
Click to expand...
Click to collapse
The problem I was having (and I assume the same for pborner) was that the activation failed because of the "lack" of sim.
I fully intend to reflash this (again) when I wake up in the afternoon. Glad it worked for you. Gives me hope for the second chance!

Cal8192 said:
The problem I was having (and I assume the same for pborner) was that the activation failed because of the "lack" of sim.
I fully intend to reflash this (again) when I wake up in the afternoon. Glad it worked for you. Gives me hope for the second chance!
Click to expand...
Click to collapse
Are you on ZV8 already? If not that is probably the Sim problem.
Sent from my VS920 4G using Tapatalk

So excited, but my replacement phone gets here today ... gotta wait for it to get here.
Looks like I have some work to do updating ICK
Sent from my VS910 4G using Tapatalk

I have the same problem going from gingervolt. LTE is on. Wipe data. Flash Broken Out Revo. Restart phone. Phone does not recognize sim. Tried twice. When I go back to GV everything goes fine.

PEOPLE PAY ATTENTION, the man said you have to be on ZV8 before updating to avoid the sim card issue, I am flashing right now to test will report.

Wow, MT, that was fast!
Many thanks for getting this done so quickly. I'll be installing later today!

MIKEOD5785 said:
PEOPLE PAY ATTENTION, the man said you have to be on ZV8 before updating to avoid the sim card issue, I am flashing right now to test will report.
Click to expand...
Click to collapse
Totally missed that line on the original post. My bad.

WORKS FLAWLESSLYUnfortunately, half the people on here DO NOT follow instructions, and they FAIL and CRY about how it doesn't work. MT puts in this hard work, and you SLUGS can't even follow directions. HE SAID VZ8 IS NECESSARY....if he says that WHY THE **** would you flash from GB?
AND THEN WASTE FORUM SPACE. UNBELIEVABLE, this installed first shot with ZERO problems without tricks and without cm9 GARBAGE. 4 G works perfect, NO SIM CARD ISSUES.
LIKE THE MAN SAID, BEFORE FLASHING YOU BETTER HAVE ZV8, IF YOU DON'T, SCREW

Sorry if I am being stupid on this, but...
I would like to jump into this new rom, but with all the different threads now, I must admit I am really confused. Every night now I receive the Software Update failed screen. I am on ZV7 running GingerVOlt 1.3 now.
Anyone kind enough to point me to the right thread to get to ZV8 and then to this rom after. I am lost reading the different threads now. I figured this would be the best thread to get the help. I have flashed many roms and such on this, nook colors, and my 3 Droid Eris phones, so I know how to do the stuff. I am just not seeing which one to go with first.
Also... I am not sure right now if my ADB is running at home or not. Formatted out my laptop a bit back and not sure if I have run it since or not. So anything that is flashable on the phone would be best for me at work.

Does blue tooth work with this ROM?

eghill1125 said:
Sorry if I am being stupid on this, but...
I would like to jump into this new rom, but with all the different threads now, I must admit I am really confused. Every night now I receive the Software Update failed screen. I am on ZV7 running GingerVOlt 1.3 now.
Anyone kind enough to point me to the right thread to get to ZV8 and then to this rom after. I am lost reading the different threads now. I figured this would be the best thread to get the help. I have flashed many roms and such on this, nook colors, and my 3 Droid Eris phones, so I know how to do the stuff. I am just not seeing which one to go with first.
Also... I am not sure right now if my ADB is running at home or not. Formatted out my laptop a bit back and not sure if I have run it since or not. So anything that is flashable on the phone would be best for me at work.
Click to expand...
Click to collapse
use mt's all in one here http://forum.xda-developers.com/showthread.php?t=1566729
all the files needed can be found here http://forum.xda-developers.com/showthread.php?t=1466655
go here to get the rooted stock zv7 rom (flashable) http://forum.xda-developers.com/showthread.php?t=1348637

[Q] Updating CM10.1

Hello, I'm not particularly new to Android, nor am I new to the prospect of flashing roms. However, I recently flashed an upgrade of cm10.1 to my Nook HD via recovery and I'm now stuck at "Loading (SD)..." in the bootloader. Is there a specific way that CM10.1 has to be upgraded or did something just go wrong during the flash? With my other devices, you can just flash the upgrade zip from the recovery menu. Thanks in advance for the help!

and finglha
bradleyrogers89 said:
Hello, I'm not particularly new to Android, nor am I new to the prospect of flashing roms. However, I recently flashed an upgrade of cm10.1 to my Nook HD via recovery and I'm now stuck at "Loading (SD)..." in the bootloader. Is there a specific way that CM10.1 has to be upgraded or did something just go wrong during the flash? With my other devices, you can just flash the upgrade zip from the recovery menu. Thanks in advance for the help!
Click to expand...
Click to collapse
Up until the most recent .zip, I have done just what you described. Couple times my HD god hung up during that same process... I just powered down and restarted and it booted fine.

lossofsilence said:
Up until the most recent .zip, I have done just what you described. Couple times my HD god hung up during that same process... I just powered down and restarted and it booted fine.
Click to expand...
Click to collapse
Yea it has happened to me too, I just powered off with a long press on the 'N' and power button. Restarted and it worked fine.

Actually i'm on 10.1 too.
This thing happens sometime. This is normal for early alfa soft.
On first clean install test i had 3 or more times stop on Cyanogen logo. But it started work on fourth time. Same happened with second clean install too (messed Adnroid to death with my hard tests and modifications ). Power OFF/On have sometime magical power.

Well, I was able to restart the nook and flashed the zip again. It worked! However, I can't change the brightness. To be honest, I can't remember if I even tried before. So, is this just a bug or is it common? Thanks for the help guys

bradleyrogers89 said:
Well, I was able to restart the nook and flashed the zip again. It worked! However, I can't change the brightness. To be honest, I can't remember if I even tried before. So, is this just a bug or is it common? Thanks for the help guys
Click to expand...
Click to collapse
I have no problem adjusting brightness on 1/28

codya321 said:
I have no problem adjusting brightness on 1/28
Click to expand...
Click to collapse
It's weird. I couldn't get it to work without using the Tablet UI. Once I switched, it started working. Oh well, it's working fine now. Thanks for the help, you guys are the best.

CM 10.1 needs some time for settle. Then it works wthout lag
Sent from my GT-I9100 using Tapatalk 2