Title says it all. I unmounted as I should have before turning off USB storage, but when I unplugged the USB cable, it said I have a damaged SD card and that I may need to format it. I hit the OK to format and nothing happened. I tried rebooting and nothing happens. I'm rooted with CM 3.9.7 mod, A2SD, etc. I've tried flashing the recovery, etc, but it can't mount the SD card and so fails. Any help would be greatly appreciated. Thanks.
nspbass
do you have a card reader for your computer?
No card reader for my computer.
do you have another phone or device that you can put your sd card in and connect to your computer
yeah, a Dash.
I've run into this problem before. Rebooting the phone. without selecting the format usually fixes it. I think it just happens when the SD card fails to unmount properly.
If you have an update.zip on the SD Card..try applying it through the recovery menu. If it says it fails to mount the SD Card over and over, then your SD Card probably is actually damaged.
Unicornasaurus said:
I've run into this problem before. Rebooting the phone. without selecting the format usually fixes it. I think it just happens when the SD card fails to unmount properly.
If you have an update.zip on the SD Card..try applying it through the recovery menu. If it says it fails to mount the SD Card over and over, then your SD Card probably is actually damaged.
Click to expand...
Click to collapse
Is there any way to fix the card? Like I said, I've got an HTC Dash running WM6 that I can put the card into and connect to the computer. Is there anything to be done?
try to format it from the dash through computer, but im not familiar with dashes
I think I may have figured it out a bit.
The Dash wouldn't recognize the 8GB SDHC, but I fortunately still had the original 1GB, which it did recognize. I was able to transfer the CM 3.9.7 onto it and boot in recovery mode and reload the update.zip file. I'm currently booting up and once that's done, I'll do what is necessary to put my 8GB card in, format it and then try to make everything work again. Suggestions?
you want to use the 3.97? that rom is still experimental. maybe you should use the 3.6.8.1 rom
jad011 said:
you want to use the 3.97? that rom is still experimental. maybe you should use the 3.6.8.1 rom
Click to expand...
Click to collapse
I think he metioned that he was alreay runing 3.9.7
nspbass said:
I think I may have figured it out a bit.
The Dash wouldn't recognize the 8GB SDHC, but I fortunately still had the original 1GB, which it did recognize. I was able to transfer the CM 3.9.7 onto it and boot in recovery mode and reload the update.zip file. I'm currently booting up and once that's done, I'll do what is necessary to put my 8GB card in, format it and then try to make everything work again. Suggestions?
Click to expand...
Click to collapse
That's about it...
I usually keep a back up of everything just in case.
Also, for your usb card reader problems...
http://forum.xda-developers.com/showthread.php?t=546153
he might want to try the stable rom though
My plan succeeded! I'm now waiting for the Market to let me download my apps again. It let me download a couple, but stopped for some reason. It's happened before, so I'm not too worried. If I should be, let me know. Thanks.
ok sounds good
For some reason, Google Talk was disabled. I enabled it and voila, everything's all good!
alright so i rooted out my nook color and now i would like to get NOOKIE FROYO 2.2 on my device. I have read everything but there is one question that i have that no one seems to put out there. And yes i am new to rooting etc. but rooting was damn easy and looks like loading nookie froyo to sd card is just as easy.
Question (probably dumb) is running the bootable sd card on my already rooted nooko color alright?
2) and it is really as simple as writing the nookie froyo image to the sd card plugging it into the nook and rebooting that simple?
orphancow said:
alright so i rooted out my nook color and now i would like to get NOOKIE FROYO 2.2 on my device. I have read everything but there is one question that i have that no one seems to put out there. And yes i am new to rooting etc. but rooting was damn easy and looks like loading nookie froyo to sd card is just as easy.
Question (probably dumb) is running the bootable sd card on my already rooted nooko color alright?
2) and it is really as simple as writing the nookie froyo image to the sd card plugging it into the nook and rebooting that simple?
Click to expand...
Click to collapse
1, as far as I know running roms off sd card is very safe, rooted or not rooted.
2, Yes... burn nookie froyo on sd card then turn on NC.
Yes, running from the SD card is safe.
I second what Pinoy8125 wrote.
1. Running off the SD card is safe and easy even with your interal memory being rooted. Look at it this way, you can try different images just by swapping different sd cards. Try the 6.8, 6.7, HC, etc.
2. Yep, just burn the image onto the SD card. Expand the 4th partition if the image size and the card size differ. This will allow you to recover the lost space. Turn on the Nook and see what you go.
I am getting very nice performance running Froyo 6.8 off of the SD card. I ran into micro sdhc compatibility issues which caused booting as well as performance issues. I have another thread out there on this issues. Awaiting people's feedback on this.
Pinoy8125 said:
1, as far as I know running roms off sd card is very safe, rooted or not rooted.
2, Yes... burn nookie froyo on sd card then turn on NC.
Click to expand...
Click to collapse
dd: unknown operand bs-1m
keep getting this when i get done putting in the last command in my macbook terminal
Any ideas?
or getting: no such file or directory found
"2. Yep, just burn the image onto the SD card. Expand the 4th partition if the image size and the card size differ. This will allow you to recover the lost space. Turn on the Nook and see what you go."
Now... I need help...how to go about expanding the 4th partition to recover lost space? I don't have a single idea on how to do this. Please explain it in details
SO basically I want to
1.) burn a CWR SD card.
2.) Put it in the nook and boot into CWR
3.) Take the card out, format it back to fat32
4.) Put the Phiremod 6.3 SD flashable rom.zip on it.
5.) Pop it back into the nook and mount the storage.
6.) Flash Phiremod onto the SD card.
7- Turn nook on and Profit??
Well, I just booted my NC to CWR from SD, then removed the SD and was able to read a second card without any error from CWR.
So I suppose that would work in theory, the only difference would be you are doing it on one single card and not two. Though I don't know how safe it would be.
Yea I took the plunge and tried it.
Although I flashed
Update 4/30: v6.2 Update(This will format /system only): http://www.multiupload.com/58WUW1AZ0A
MD5 - 70b2ff0345897252f3f3dff8728a4b55
found in this thread Flashing Roms to SD CARD -
http://forum.xda-developers.com/showthread.php?t=998861
and I didn't boot into Phiremod, instead it was nook stock.
Would I first need to flash V6.zip, then flash the 6.2 update.zip?
EDIT* Did not work. Still boots into stock
How about you try this:
[ROM][CM7] Size-agnostic SD Card image and CM7 installer for SD Cards. with updater
I don't know if it works with a Phiremod ROM but it doesn't hurt to try. I used this to install plain CM7 on my Card.
____________________________________________________
Sent from NookColor CM7 using Tapatalk
So, a few days ago verygreen uploaded his emmc cyanogenmod install for Nook HD+. I was ecstatic but only got around to installing it today. Install went great up until after flashing the rom.The nook threw an error when trying to unmount the sd card (as per verygreen's instructions) "no problem, I'll just shut down the tablet" I thought. So I do so, remove the SD card, turn the tablet back on, and insert a seperate SD card for storage. The rom loaded up just fine and everything seemed normal. I downloaded and ran a benchmark to see that everything was up to par then went to take a screenshot (to compare to other versions later). A second later I looked at my notifications bar to see a message that the screenshot could not be taken because there is no SD card. After a short investigation I realized that the SD card wasn't showing up in my storage section. It showed up just fine in my computer and I've used the card in this nook before. Just to be sure I plugged the CWM card from earlier, sure enough it didn't show up either. As I'm not a complete novice I figured I should try reflashing before coming here. I did so and the nook seemed to recognize that the card was there! Wait, it now says the card is blank or in an unsupported filesystem. Checking the SD on the computer shows it to be in Fat32, which worked in all previous Roms just fine and clicking the notification to try and format also does nothing. Anyone have any advice?
Additionally I should probably mention that I am using the 05/05 Rom, which I thought was supposed to fix mounting issues
Same issue here :/
tehkingo said:
Same issue here :/
Click to expand...
Click to collapse
Yours was on Hybrid and easily solved. His is on emmc.
Sent from my Nook HD+ running CM10.1 on emmc.
---------- Post added at 05:42 PM ---------- Previous post was at 05:36 PM ----------
Nookuser19 said:
So, a few days ago verygreen uploaded his emmc cyanogenmod install for Nook HD+. I was ecstatic but only got around to installing it today. Install went great up until after flashing the rom.The nook threw an error when trying to unmount the sd card (as per verygreen's instructions) "no problem, I'll just shut down the tablet" I thought. So I do so, remove the SD card, turn the tablet back on, and insert a seperate SD card for storage. The rom loaded up just fine and everything seemed normal. I downloaded and ran a benchmark to see that everything was up to par then went to take a screenshot (to compare to other versions later). A second later I looked at my notifications bar to see a message that the screenshot could not be taken because there is no SD card. After a short investigation I realized that the SD card wasn't showing up in my storage section. It showed up just fine in my computer and I've used the card in this nook before. Just to be sure I plugged the CWM card from earlier, sure enough it didn't show up either. As I'm not a complete novice I figured I should try reflashing before coming here. I did so and the nook seemed to recognize that the card was there! Wait, it now says the card is blank or in an unsupported filesystem. Checking the SD on the computer shows it to be in Fat32, which worked in all previous Roms just fine and clicking the notification to try and format also does nothing. Anyone have any advice?
Additionally I should probably mention that I am using the 05/05 Rom, which I thought was supposed to fix mounting issues
Click to expand...
Click to collapse
You make it sound like you are trying to insert the SD after you have booted to CM10.1. That won't work. You must boot with the SD already inserted so that it is recognized while CM10.1 starts up.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Yours was on Hybrid and easily solved. His is on emmc.
Sent from my Nook HD+ running CM10.1 on emmc.
---------- Post added at 05:42 PM ---------- Previous post was at 05:36 PM ----------
You make it sound like you are trying to insert the SD after you have booted to CM10.1. That won't work. You must boot with the SD already inserted so that it is recognized while CM10.1 starts up.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
That didn't work I'm afraid. The message about the blank SD card is gone but it still won't let me save a screenshot. Gives a message about the storage being in use. Also, attempting to move an app to the SD card says there's not enough space... On my freshly formatted 32 gigabyte card that, once again, works and reads just fine on my computer. I will mention there is a header for the SD under my storage tab in settings, and it attempts to calculate the used space of the SD, however it does that whether the card is in or not. For that reason I don't think it means anything. Any other ideas? Because I'm certainly at a loss.
Nookuser19 said:
That didn't work I'm afraid. The message about the blank SD card is gone but it still won't let me save a screenshot. Gives a message about the storage being in use. Also, attempting to move an app to the SD card says there's not enough space... On my freshly formatted 32 gigabyte card that, once again, works and reads just fine on my computer. I will mention there is a header for the SD under my storage tab in settings, and it attempts to calculate the used space of the SD, however it does that whether the card is in or not. For that reason I don't think it means anything. Any other ideas? Because I'm certainly at a loss.
Click to expand...
Click to collapse
How did you freshly format the card? With Windows? You need to use a program named SDFormatter free on the web.
If you boot with no card in you will see that it does not show a card under storage, does not attempt to calculate, etc. There is something about your card it does not like. The hardware on the HD+ is notoriously faulty when it comes to SDs. Format it with SDFormatter, clean the contacts, make sure it is seated well in the slot and anything else you can do to improve things.
Sent from my Nook HD+ running CM10.1 on emmc.
Update
I'm a moron. I failed to notice that the rom that the I downloaded actually was the 05/04 rom, the one with no bluetooth or SD mounting... In my defense verygreen hadn't updated his post (I downloaded from the one he linked in the body of his text, not at the bottom). *Sigh* Still though, I should have been paying more attention and if I had been less lucky I could have bricked my device. Anyways, after flashing the PROPER rom SD mounting works fine (though it was a bit finicky, requiring a reboot before finally working). Anyways thanks for your time, and sorry for giving inaccurate information.
what is the sd format allowed by hd+ in emmc?
I wanted to follow up on this thread by asking a general concluding question-
In order to use the sd cards directly in emmc, will the SD cards have to be in fat32 format only? Or can it be in exfat (or even ntfs)? According to a thread, somebody put a quote from the nook website that it can handle exfat.
The reason is that I wanted my nook to be able to read mkvs. I went through the sdformatter software, and it seems that it only formats in fat32.
TIA.
leapinlar said:
How did you freshly format the card? With Windows? You need to use a program named SDFormatter free on the web.
If you boot with no card in you will see that it does not show a card under storage, does not attempt to calculate, etc. There is something about your card it does not like. The hardware on the HD+ is notoriously faulty when it comes to SDs. Format it with SDFormatter, clean the contacts, make sure it is seated well in the slot and anything else you can do to improve things.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I am having same problems.Inastalled Verygreen's CM10.1 on internal storage this morning.SD card is not being recognized by nook.I go to settings and tap "storage" and settings force closes,Tried to mount sd card thru recoveryand error message comes up.I formatted sd card in windows and then SD Formatter in fat32 format,C
leaned sd slot with compressd air,No go.Tried 3 different cards Samsung.sandisk class 10 32 gb,sandisk class 4 16gb ,Samsung class10 8gb same result.E
nen reinstalled CM 10.1 emc 6/8/13.did not help.
akramarshad said:
I am having same problems.Inastalled Verygreen's CM10.1 on internal storage this morning.SD card is not being recognized by nook.I go to settings and tap "storage" and settings force closes,Tried to mount sd card thru recoveryand error message comes up.I formatted sd card in windows and then SD Formatter in fat32 format,C
leaned sd slot with compressd air,No go.Tried 3 different cards Samsung.sandisk class 10 32 gb,sandisk class 4 16gb ,Samsung class10 8gb same result.E
nen reinstalled CM 10.1 emc 6/8/13.did not help.
Click to expand...
Click to collapse
I temporarily had the same issue, but mine was caused by me tampering with /system/etc/vold.fstab to test a new swap I was trying to make. I changed a setting there and it would not recognize the SD and settings/storage crashed. So that tells me that your system is definitely not mounting the SD. It could be a faulty SD slot. Are you sure you are completely clicking the SD into the slot? Did the slot work well when running stock?
Edit: How does it act when you boot with no SD inserted? Does settings crash? And what happens if you insert the SD after it is booted to CM10.1? Does settings crash then?
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
I temporarily had the same issue, but mine was caused by me tampering with /system/etc/vold.fstab to test a new swap I was trying to make. I changed a setting there and it would not recognize the SD and settings/storage crashed. So that tells me that your system is definitely not mounting the SD. It could be a faulty SD slot. Are you sure you are completely clicking the SD into the slot? Did the slot work well when running stock?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
It was working fine with stock as well as hybrids from Verygreen as well as Bokbokan.I will try doing a complete wipe including system.Previusly I wiped data and catch partitions.
akramarshad said:
It was working fine with stock as well as hybrids from Verygreen as well as Bokbokan.I will try doing a complete wipe including system.Previusly I wiped data and catch partitions.
Click to expand...
Click to collapse
See the edit above.
Sent from my Nook HD+ running CM10.1 on emmc.
SD card not reading Nook HD+
Reinstlled after wipingdata,catch and system and now it is working fine.I guess something in system was causing it,Thanks Leapinlar I appreciate you prompt help.
same here with samsung galaxy exhibit 4g
akramarshad said:
It was working fine with stock as well as hybrids from Verygreen as well as Bokbokan.I will try doing a complete wipe including system.Previusly I wiped data and catch partitions.
Click to expand...
Click to collapse
I have tried all of the things listed on here. My sd card is formatted fat32. it reads just fine on my computer but when inserted into my phone I can't move apps to it, I can't open it to look at my files. I even tried removing everything from the sd and starting over. This has only been since I upgraded to cyanogenmod 10.1. any suggestions? I really want to move some stuff and am in need of my music files at the gym
jmcpheeters said:
I have tried all of the things listed on here. My sd card is formatted fat32. it reads just fine on my computer but when inserted into my phone I can't move apps to it, I can't open it to look at my files. I even tried removing everything from the sd and starting over. This has only been since I upgraded to cyanogenmod 10.1. any suggestions? I really want to move some stuff and am in need of my music files at the gym
Click to expand...
Click to collapse
You cannot move apps to SD with CM10.1. Apps2SD is not implemented.
And to access your external SD, you need to look in ext_sdcard. But CM10.1 on emmc uses the internal SD by default for everything. You can change that by flashing my swap SD zip from my HD/HD+ CWM thread linked in my signature. See item 4.
Sent from my Nook HD+ running CM10.1 on emmc.
to clarify
ok thanks. so just to clarify, does the nook hd/hd+ work for my Samsung exhibit 4g?
leapinlar said:
You cannot move apps to SD with CM10.1. Apps2SD is not implemented.
And to access your external SD, you need to look in ext_sdcard. But CM10.1 on emmc uses the internal SD by default for everything. You can change that by flashing my swap SD zip from my HD/HD+ CWM thread linked in my signature. See item 4.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
nook HD/HD+
it isn't showing up when I go to unzip on my phone.
This has proven to mean this isn't compatible with my phone. is there another version you can suggest for me to try?
jmcpheeters said:
ok thanks. so just to clarify, does the nook hd/hd+ work for my Samsung exhibit 4g?
Click to expand...
Click to collapse
jmcpheeters said:
it isn't showing up when I go to unzip on my phone.
This has proven to mean this isn't compatible with my phone. is there another version you can suggest for me to try?
Click to expand...
Click to collapse
It is a Nook HD+ rom, and will not work on a non-Nook HD+ device. Try the roms in the Galaxy Exhibit development forum.
If This Helps Anyone...
I spent roughly 4 to 5 days' worth of working hours sitting here at my laptop, trying more and more frustratingly, to get my Nook HD+ to take the new CM Rom, and then dealt with about a dozen full 1080p HD movies I had already spent about 3 hours each to convert to .mp4 and the right size for my Nook, which now was not showing ANY of the content on my 32g SD card. Well, I tried all the formatting (using the SDformatter program), all the re-booting and putting the content directly on it through the Nook, and putting the files on it through my laptop, and I got nothing.
Finally, after noticing a theme among most of the users who were having problems specifically with SanDisk and/or 32gb sized cards, I took the awesome (and expensive) 64gb class 10 SDXC Samsung card out of my Note 2 phone, and formatted that one using the SDF program, and put it on 'exFAT', and after putting the blank card back in my Nook (powering it off fully first), I had to COPY THE FOLDER FROM THE NOOK'S MAIN STORAGE CALLED "MY FILES" AND PASTE IT INTO THE SD CARD STORAGE. Then, I opened it and made folders inside that one for Movies, Music, eBooks, etc... I then loaded the movies onto it via the Nook itself, making sure to paste the files into the SD folder. I also noticed that I needed to keep the Nook from falling asleep, and set it to the highest setting of time before it would go into sleep mode (30 min) and had to keep swiping the screen to reset that time. I also just loaded one large movie file or a few smaller video files at a time, because if the screen went off, or if I had videos loading onto the Nook for more than a couple minutes, then I would get the frequently reported error saying that it 'could not copy'.
After doing all of this, I was finally able to start a couple of my movies with minor problems. I hate how it says in the video player I was using, that you have to use the right side touchscreen to swipe on an invisible volume control up or down, and it was extremely sensitive but also not easy to control.
So, to review:
-Try using a different card other than SanDisk and 32gb
-DL the free SDformatter program and use that to format ANY card you put in your CM rooted Nook! Try to set it at 'exFAT' also.
-Power OFF the Nook before installing the new SD card.
-Then plug the Nook into your computer, and COPY-PASTE the file folder "My Files" in the Nook's MAIN STORAGE and put it into the SD card. Make folders inside this one to sort your movies, music, books, etc.
-Copy-Paste your files that are NOT eBooks from your computer into the new 'My Files' on the SD card. (I suggest using Calibre or another program to load eBooks into your Nook after you have gotten all the metadata correct for each book.) Keep the Nook 'awake' and do not allow the screen to enter sleep mode during loading of files. Make sure to load only about 3 minutes' worth, or no more than one LARGE movie file at a time onto the Nook, to prevent it from disconnecting and giving you an error pop-up.
That should do it, and if you have problems after this, then maybe ask around more. I only know how this works by my own extensive (and exhausting) trial and error...
since i did this on my nook putting files over the sd card is messed up, only lets me use the other 29gb is if its in nook and nook plugged in, i want to not use the cm 10 and use my sd normally but it says 199mb when format, please help!
Whelan189 said:
since i did this on my nook putting files over the sd card is messed up, only lets me use the other 29gb is if its in nook and nook plugged in, i want to not use the cm 10 and use my sd normally but it says 199mb when format, please help!
Click to expand...
Click to collapse
Get the free program SDFormatter on the web. Then set the option for size adjustment and format it. Should take it back to full size.
Sent from my Nook HD+ running CM10 on Hybrid SD
simply Put it on the camera and use the format ability of camera to format it. It should be back to normal.
leapinlar said:
Get the free program SDFormatter on the web. Then set the option for size adjustment and format it. Should take it back to full size.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
hi, worked perfectly thanks very much, people like you make this site so awesome
Once you burn ClockWorkMod (or any other recovery), your SD card becomes partitioned. The other partition can only be accessible by the Nook.
If you no longer want to use this SD card in your Nook, or would prefer just to use this card as a media card; you can use the software SDFormatter. Use this software to format, and your card will be restored back to it's factory settings (unless you decide to change the file system).
You can find this software for Windows here: https://www.sdcard.org/downloads/formatter_3/eula_windows or for Mac: https://www.sdcard.org/downloads/formatter_3/eula_mac/
All the best.
Whelan189 said:
since i did this on my nook putting files over the sd card is messed up, only lets me use the other 29gb is if its in nook and nook plugged in, i want to not use the cm 10 and use my sd normally but it says 199mb when format, please help!
Click to expand...
Click to collapse
gpart on ubuntu