[Q] haveing problem for installing 3button download mode to use ODIN3 - Galaxy S I9000 Q&A, Help & Troubleshooting

hello gyes!
i'm in great jeopardy...............
spent 2 days searching-> only 1 thing & its-> how to install a 3 button download mode on my sgs gt i9000.
I crashed my froyo 2.2.1 while debranding it.so i revert it back to eclair 2.1 but now kies won't recognise it for updates
i downloaded every thing i needed-> .pit file\gingerbread file\odin3\the adb a k a sdk what ever.(sdk manager)....even played in commandpromt.1 click root\unroot. decorder update with kies
but all seems worthless unless i don't get the 3 button download mode
i tried all XDA forums-tutorials.....but nothing to come in way of sucess.
so please give some suggestions & links that could save my babe

First of all it's in wrong section...
Second head over to general section.. There is complete guide of how to install 3 button combo etc.. Or use the search button
It happed happen to me once couldn't get the 3 button working so I download it from xda than flashed with bootloader checked via odin1.7
Hope this helps
Cheers

thanx man your advice really helped me......
i did as you adviced me
my phone went in download mode then i flashed using odin3 v1.8)
everthing went fine but there is problem- when i connect my phone to kies->it says:the version of this device cannot be updated
why is that i downloaded original samsung gingerbread OS for my i9000?
pit file 512
OS GT_I9000_XXJVK_XXJVK_OXAJVK
so whats up....?
please guide me more

You CAN'T upgrade a rooted phone from KIES... It's ONLY for LOCAL provider/phones and WHEN the LOCAL provider have an update THEN AND ONLY THEN the KIES will upgrade an UNROOTED CLEAN UNTOUCHED phone... Besides the JVK is the latest UNOFICIAL - official ROM as the JVB... PLEASE READ before you post and go to the right section, you make people think you are a lazy leecher and not worth help... And they are RIGHT!!!

Related

Is it possible...

I installed the Gingerbread update off samfirmware on my samsung galaxy s but i would like to go back to the official firmware for vodafone UK so i can just continue updating through Kies, is it possible and if so how??
Sorry if this is in the wrong place but i have been searching the net for ages and i can't find anything and all i keep seeing is this site so i thought you guys might be able to help me.
Reinstall the original firmware you saved .
Another one that did not save then you might find somebody with firmware saved .
Or you flash stock rom via Odin use registry spoof method to try to update to Vodaphone current firmware .
Kies only updates original firmware .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
Hi, thanks alot for getting back to me, is there a tortrial or can you help explain what i have to do.
Thanks
EDMJosh said:
Hi, thanks alot for getting back to me, is there a tortrial or can you help explain what i have to do.
Thanks
Click to expand...
Click to collapse
It is quite simple. Disable any lagfix or ext4 conversion (if any) back to RFS. Flash via ODIN with preferably 512 pit & repartition (it will save you a lot of time & less opportunity of errors appearing afterwards). I would also suggest you to make a backup of your data & do a factory reset before flashing back.....
On youtube are many tutorials how to flash back to your stock rom.
example:
search: samsung galaxy s flash stock rom
-> the first video
stock roms you can download in this forum
I do not have the original VodaFone Firmware, That's why i need to change this current firmware so i can update it via Kies to the original Vodafone uk firmware, i do not know nothing about lag fixes or anything, i just used odin to update my phone to V2.3.3, i followed simple instructions to do it, it was my first time doing anything to my phone, i know i should of read into it etc....
http://forum.xda-developers.com/showthread.php?t=723596
Basic faqs .
Roll back to 2.2.1 from Beta 2.3 Gingerbread .
Post 2 but you are as always at risk of bricking your phone .
http://forum.xda-developers.com/showthread.php?t=1033781
Kies will only update stock 2.2 .1 to Vodafone firmware if you spoof the registry as posted .It will not update to Gingerbread until Gingerbread is released .
jje
I'm not very good at these things and i know i shouldn't of done it in the first place but i don't understand those instructions, is there no way anyone has it or can get it for me? or extract it from there phone or something like that?
No nobody seems to bother keeping original firmware >Try a Google search for Voda firmware .
Flash back to stock Eclair 2.1 and try below to spoof Kies.
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
That fails then your update path is via Odin .
jje
Hi, thanks alot for your time to reply to me, i have currently rooted and i have SpoofFW but when it says choose preset i dont have any in the drop down box and i need a Vodafone uk one, any help here mate?
I have posted the codes you should use in SpoofFw thread, but here you go again.
The codes can be found in the presets as UK (Vodafone) and is
Product Code: GT-I9000HKDVOD
PDA: I9000BUJG2
CSC: I9000VODVOD
Phone: I9000BUJG1
An alternative is to use Check Fus Downloader with which you can download the latest official firmware for UK Vod (I9000BUJS3) and flash that file with Odin. The app can be found in my signature.
Hi, thanks alot mate, can you please guide me through how to do it as when i try and find the preset on your app, there is none there! just blank, so i tried typing it all in and following instructions but it hasn't worked could you please explain?
It still says... This device cannot be updated and still gives me my normal product code etc...
EDMJosh said:
Hi, thanks alot mate, can you please guide me through how to do it as when i try and find the preset on your app, there is none there! just blank, so i tried typing it all in and following instructions but it hasn't worked could you please explain?
It still says... This device cannot be updated and still gives me my normal product code etc...
Click to expand...
Click to collapse
make sure you are connected to internet when you start the app, and try use Refresh preset in the menu. also make sure you have busybox installed.
first hit Backup. put the info above in the fields. and hit step 2 ok. Then press reboot, and start the app again. put the same info as before in the fields and hit ok on step 3. Conenct to Kies.
you can send me your complete log right after hitting step1 button if anything goes wrong.

[Q] Need an urgent help...

Hello all,
I recently bought samsung galaxy s i 9000 it was pre loaded with froyo 2.2 and when ever i connect it to kies it gets connected for the first time and then onn if i disconnect it will never get connected unless i restart the phone.. I tried to update the firmware several times and it downloads the files but gets disconnected in between. I badly wanted to change to ginger bread and just loaded with odin.. Now, I started having the real problem its getting stuck most of the times and i had to open the task manager to free the ram.
But the video player is supporting more formats and no problem connecting with kies.. and i used it for sometime. Now while hanging up a call its getting stuck frequently. And once i had to lose most of my balance.
I decided to roll back my firmware to froyo 2.2 but I came to know I might lose the warranty tampering with O.S.. Is that really so?? And I got an asian version of froyo 2.2.1 for march 2011 from one of the threads and I flashed it into my phone. Now, kies is telling that this version cannot be updated. Can some one please suggest me
1) How I can get back my official firmware...which can also support updates in kies.
2) And Is that possible to retain warranty with any firmware?
I had to spend the whole of sunday over this please suggest me...
Thank you
go to samfirmware.com try search see u got luck there got upload the version for ur country... juz flash with odin... very easy....
Flash 2.3.3
ovsanjay said:
Hello all,
I recently bought samsung galaxy s i 9000 it was pre loaded with froyo 2.2 and when ever i connect it to kies it gets connected for the first time and then onn if i disconnect it will never get connected unless i restart the phone.. I tried to update the firmware several times and it downloads the files but gets disconnected in between. I badly wanted to change to ginger bread and just loaded with odin.. Now, I started having the real problem its getting stuck most of the times and i had to open the task manager to free the ram.
But the video player is supporting more formats and no problem connecting with kies.. and i used it for sometime. Now while hanging up a call its getting stuck frequently. And once i had to lose most of my balance.
I decided to roll back my firmware to froyo 2.2 but I came to know I might lose the warranty tampering with O.S.. Is that really so?? And I got an asian version of froyo 2.2.1 for march 2011 from one of the threads and I flashed it into my phone. Now, kies is telling that this version cannot be updated. Can some one please suggest me
1) How I can get back my official firmware...which can also support updates in kies.
2) And Is that possible to retain warranty with any firmware?
I had to spend the whole of sunday over this please suggest me...
Thank you
Click to expand...
Click to collapse
Go to www.samfirmware.com and register. Download the ROM you want. I'm currently using XXJVR (Android 2.3.4). It is quite stable.
Then, use Odin to flash the ROM onto your device. Make sure you backup all your important data. I recommend MyBackupPro. It's available in the Market.
Then, switch off your phone completely and put it in 'Download Mode' (Volume Down + Home + Power). Connect it to your PC. Make sure you have the drivers installed.
Follow the instructions given on the website to flash with Odin. The XXJVR ROM has only 1 tar file. So, you're gonna have to use this procedure--> http://www.samfirmware.com/Odin I9000 2.png
Best of luck! Do let us know how it goes!

New firmware From KIES

Hello everyone.
I've just purchased I9001 and the version is gingerbread 2.3.3. I have a lot of application installed. When i upgrade my KIES version to 2.1.1.11124_17, a new firmware was mentioned by KIES. This is the details:-
My current version is PDA:KG2 / PHONE:KG1 / CSC:KG2 (XME)
New version is PDA:KJ2 / PHONE:KJ1 / CSC:KJ1 (XME)
If i upgrade the firmware, will i lost all my application installed?
If yes, is there any other method to back up my apps?
Attach is the picture of KIES
Don't use Kies unless you want to brick your phone.. the software sucks so hard that will almost brick your phone 100% sure. Use Odin instead and flash XXKPS (2.3.6)
But first root your phone and save /data/apps to your local drive
I think this is allot information for you if you just bought the phone but you should read the forums
You can find everything you need here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
Go to 2.3.6 and download I9001XXKPS. You can use most of the tweaks for that.
Note: your warranty will be lost (at least formal). But its worth to do
you can find a good description how to flash a rom also here
i just installed XXKPU as described above and improved it following this post from point 3 of the step by step description on (steps 1 and 2 can be ignored due to previously mentioned description)...
my sgs+ works fine now... all apps with complete app data and settings plus market links were restored with titanium backup pro within 30 min...
make sure not to use kies ! it bricked my phone ! use odin !
Does KIES brick the SGS Plus only?
Before i started flashing roms i updated twice with kies and nothing happened ?
Kodon said:
Does KIES brick the SGS Plus only?
Before i started flashing roms i updated twice with kies and nothing happened ?
Click to expand...
Click to collapse
updating with kies is a real adventure, i tried it only once, and i was lucky it gave me an error at 0% , so i just got the battery out and all worked fine after a reboot, my friend was not that lucky, it froze on 55% and he could do nothing about it, so he had to flash a stock rom with odin to get his phone working again. i don't think it can hard brick ur phone (well the chances are little, but still possible) , mostly u can get into download mode and fix the issue, for those who don't know how, they just have to take their phone to service and claim their warranty.
But i like to know too...Is it a SGS plus thing? I have a SGS and updated 2 times my SGS, 2 times my girlfriends SGS and 1 time the SGS II of my sister. All with kies. Nothing happend.
Sooo... am i this lucky or IS it really a SGS plus thing?
Cheers
New...
If you are not interested in exploring new ways to do things, Kies is the safest way

Need some advice with i9000M

Hi guys, I know I need to make this short but I want it to be clear anyway. This is crazy I wanted nothing to do with smartphones 3-4 days ago because all the carriers rip us off with huge bills to get them. But low and behold when my cheap flip phone died after 3 years of loyal daily work a friend of mine offered me his Galaxy S i9000m for a good price. Started playing with the device and having a strong software/computer background started having a lot of fun with all the applications and was amazed with the possibilities (Networking, ipcam whatever) that just kept multiplying until I fell upon applications that needed something called gingerbread... Anyways I can tell you I learned a ****load in 48hours...
So I installed Samsung Kies, it found me the update and put it on for me.. (2.3.3 Gingerbread) then the nightmare started. The phone would boot, and would randomly reboot a random number of times until it could finally stay on and this could last from 2-30 minutes. So I thought, I'll just do a factory reset, to realise that its "STUCK" in 2.3.3 once its updated no going back to 2.1 or 2.2 easily.
Started looking around for ways to downgrade, and EVERY SINGLE LINK redirects to these 'mass download' sites that end up saying the firmwares were taken down for copyright issues. So desperate to find something, I fell upon a multiple CSC FROYO 2.2 firmware for the i9000 and was able to flash that in download mode the phone worked fine, except for me being very curious about the fact that I lost the "M" in my model description...
So started reading this thread(Mostly because I had already realised that with this non i9000m rom I had lost the 3 button DOWNLOAD MODE which i Had before) **** : http://androidforums.com/galaxy-s-a...flashing-darky-v9-gt-i9000m-minimal-risk.html
Got it rooted, got clockwork on, never managed to get the voodoo kernel working had errors in CWM.. so I was ready to give up until my eyes caught the
"*#*#2663#*#*
Then click Touch key FW update"
Which I thought would be neat to try.
NIGHTMARE, now BACK and MENU are dead, I understand that this is because I am running a non i9000m ROM and that updating the firmware rendered them unusable.
I came accross a post : http://forum.xda-developers.com/showthread.php?t=869492
Where this problem is adressed, I pretty much understand everything that should be done to get this back on its feet (right now the phone is still working I can use it at least 75% of its functions work except no back and menu)
Where I need your help : I'm not too sure how to attack this the right way, since I can't get into download mode I understand flashing is now more complicated to accomplish and now that I know that I need a i9000m firmware how can I find that...
Sorry for the long post I know I'm a noob here but I wanted to prove I had done all my homework to get where I'm at now seeking help from you guys!
Thanks a lot
Mat
By the way : Galaxy S GT i9000m currently on a 2.2 i9000 rom, my carrier is BELL. (Canada)
So there's no way of updating to 2.3.3 using Kies?
The only thing I can think of is getting a USB jig from ebay, which makes the i9000 go to download mode instantly. Good luck!
Alright, so I used CHECK FUS, and was able to get the i9000m stock BELL firmware YAY
now the help I need is to flash it correctly and find a way to get past the no download mode problem, would be very appreciated,
thanks guys
No, similar minds Sepharite, I also thought of redoing the Kies method, and then going back again if I needed to but now Samsung Kies says "Your device does not support firmware updates through Kies" Wow.. useful app, a samsung native app can't even detect it's own fricking hardware.
Thanks
UPdate : Was able to restore the 3 button "DOWNLOAD MODE" with a little tutorial online. Now I tried flashing my i9000m with ODIN, it flashed all the way and I get a i9000M logo now but it gets to the splash S logo and keeps rebooting never gets into the actual android setup is there something I did wrong?
In Odin all I put was the "BELL i19000m stock ROM" under PDA and wrote it. The device rebooted after flash but there still seems to be something I haven't done right.
Thanks guys
Please help guys, I know some of you out there have got this stuff nailed down!
Did you flash with a 1 file ROM or a 3 file ROM?
Using the UGKG3 ROM that you can fine here:
http://forum.xda-developers.com/showthread.php?t=1102881
Place the 3 files in their respective places (PDA, PHONE, CSC), for the PIT file, select the 512 pit file that should have come with ODIN, connect the phone, wait for ID:COM to turn yellow, and press Start.
That should get you going again. You may get apps that force close, so you'll need to delete the apps data and then reinstall them.
Hey thanks a lot man ya my flash was a SINGLE FILE, I bricked it yesterday trying to flash a different ROM since I had nothing to lose, I just got it working again on the old 9000 ****ty version that my back and menu keys don't work...
Now for some reason the USB JIG doesn'T work anymore after a couple of uses... could something have been damaged by doing it many times?
And your original roms section they are all unavailable due to copyright did you check the links before sending them?
When you say get the stock roms, I was able to get the UGKG3 file, but what about the versions? When I look at the north american section of the 2.2 version
UGKC1/UGKC1/BMCKC1/Sbl
UGJL2/UGJL2/BMCJL2/Sbl
UGJK3/UGJK3/BMCJK3
which one of the three suits me?
Thanks for your help, and if I get this running and go back and update my touch key firmwares with the right "Vibrant / 9000M" roms I should get them working again?
PS : I'm also very preoccupied by the fact that the USB JIG fix doesn'T seem to pop download mode anymore because this version of the ROM that I have has Download mode not working with the 3 button method. :S I wonder whats going on, but basically if I get your ROMS working the first time It'll fix everything but if it crashes then I lose the galaxy haha
Not sure why the USB jig doesn't work anymore. I have a couple and have only tested them on my phone to make sure they work, but they did not work on a Galaxy S II that I tried it on.
I just checked and the download link for the UGKG3 ROM at multiupload (downloading from multiupload), still works (you need to enter the captcha phrase).
The site megaupload was shut down by the US gov't, so that one won't work.
EDIT: UGKC1/UGKC1/BMCKC1/Sbl is the latest Froyo release from Bell. That's what mine and my wife's gt-i9000m phones came with.
She's still running it on hers.
Ok sorry for all these posts, basically when you said UGKG3 you want me to get the 2.3.3 ROM on ? Is that right? What if I Want to put on 2.2 to be sure I have no trouble with it since I'm in all this mess because the Kies update to Gingerbread had my phone in a bad state.
Thanks a lot by the way!
Sorry your post refreshed right after I did mine. Alright cool so I'll try the one you say your wife is running, I had made myself a JIG with a stock Samsung wire, it was working fine with a 300K resistor and I decided to solder it on and then it stopped working after that.... maybe the actual "usb plug" is damaged from the soldering heat I guess I'd have to try another wire, but anyway I'll try to download the 2.2 I just got the UGKG3 3 FILE rom downloaded one of the links did work!
But I'm a little worried about 2.3.3
I'll try to see if i can download the 2.2 first.
I mean basically... these roms shouldn't jam during transfer i Guess
One other thing I see different confusing information, is it important for me to click 'update bootloader" with these stock roms since these files contain an 'SBL' ? Because both times I bricked it was with an "update bootloader checked" firmware update trying to put the ARIES 3 button method fix as a boot.bin and sbl.bin
Fanks..
Files with SBL in the name already have the bootloader included in the PDA file, so "update bootloader" should NOT be checked.
That reassures me, because the only times it did jammed was when the bootloader was checked! THanks a lot blackrose i'll go out and buy another usb cable because I destroyed mine making my JIG. And I'll try yours out. I was reading a lot on another thread and found this one guy who flashed the JL2 one to save his keys instead of the C1 you said your wife was running, whats the main difference between those two and which one should I start with?
Update : I got a new wire, flashed the KC1 version of the firmware, everything goes fine, I did a repartition with the 512 PIT, it reboots the phone, loads all files in a prompt in yellow and there are no errors that appear, the phone reboots after writing 'successful update' and then goes to the galaxy logo and jams there and does the ONE vibrate, PAUSE, 2 vibrate on a black screen forever. The advantage of having successfully flashed a 9000M ROM allows me to have access to my DOWNLOAD MODE 3 button method, but ever since I flashed that 2.2 i9000 XXJP2 (seems its a euro version) off a torrent I found on the web (When I was desperate to find a functioning 2.2 working version) it seems as though it doesn'T want to boot with any other rom than that one, because all the 9000M roms that I've tried so far flash correctly, and the logo actually changed from i9000 to i9000M on the startup, but they just don't boot.. what could be missing it doesn't seem to be much???
Thanks Mat
If any of this can help, the device was rooted, I was following the darky's mod i9000M guide so I had previously installed the CLOCKWORK MOD and that's as far as I got because my eyes caught the FIRMWARE TOUCH KEY UPDATE which ruined my keys.
Could any of this have screwed something that stops my other roms from booting?
Thanks guys I really want to get this phone up and working again as I don't have much money and am afraid I'll have to cancel with my phone company if I just can'T get this running. I am also willing to make a significant donation to whoever can help me.
You in Canada right? Where abouts?
Sent from my GT-I9000 using xda premium
Quebec province
Alright, if this can help anybody my whole problme is solved.
I flashed the ****JL2**** the KC1 did not boot, the JL2 did.
Once inside JL2, I was able to update my TOUCH KEY FIRMWARE *#*#2663#*#* and everything went back to normal
I have no idea why the KC1 does not work, bugs me out.

[Q] Galaxy Note Update problem (India)

Hi guys.
I am unable to update my Galaxy Note by any means. Kies says that my device does not support software upgrading via Kies. When I tried OTA, I get a message saying Failed to update firmware.
This is not the ICS upgrade. This is a 72.29 MB upgrade rolled out months back. I have tried everything with Kies. It refuses to budge.
I have browsed several threads but none provided me with a working solution. I read that sometimes the firmware is flashed when you give the phone for repairing. I DID give my phone at the service centre once and was handed back a completely fresh install of the software.
I am very noob-y in matters related to kernels and CSC and odin. A detailed answer would be really helpful. Your patience and effort is appreciated.
Please help guys. Thanks!
You can update to the latest version of ICS for India using the PC Odin. Thats the fastest way of upgrading. Follow the instruction that Dr Ketan has for upgrading to the Indian Rom of ICS.
hope this helps.
download the stock ics from samfirmwares.com
download pc odin
enable usb debugging
unknown sources
open pc odin
just open pda and browse to the tar file and do not change any other options and flash
profest said:
Hi guys.
I am unable to update my Galaxy Note by any means. Kies says that my device does not support software upgrading via Kies. When I tried OTA, I get a message saying Failed to update firmware.
This is not the ICS upgrade. This is a 72.29 MB upgrade rolled out months back. I have tried everything with Kies. It refuses to budge.
I have browsed several threads but none provided me with a working solution. I read that sometimes the firmware is flashed when you give the phone for repairing. I DID give my phone at the service centre once and was handed back a completely fresh install of the software.
I am very noob-y in matters related to kernels and CSC and odin. A detailed answer would be really helpful. Your patience and effort is appreciated.
Please help guys. Thanks!
Click to expand...
Click to collapse
download indian ics and use pc odin to update..
see this Dr. Ketan's link http://forum.xda-developers.com/showthread.php?t=1667018
will wait for OTA update.. waited for such a longtime already!!
Karthikdoc - U dont have to wait for OTA update. It is already there.. Just keep refreshing .. I did a OTA update of Note to ICS almost a week ago .. and some even more earlier.
Profest - It would be good if you can go into
Settings --> About Phone
and provide us the Android version
Baseband version
Kernal version
Just want to make sure the samsung guys gave you a right flash and also to guide you in the right direction ..
Maybe factory reset will help.....
Afterall you will have to do it before upgrading to ICS.

Categories

Resources