Hi guys.
I am unable to update my Galaxy Note by any means. Kies says that my device does not support software upgrading via Kies. When I tried OTA, I get a message saying Failed to update firmware.
This is not the ICS upgrade. This is a 72.29 MB upgrade rolled out months back. I have tried everything with Kies. It refuses to budge.
I have browsed several threads but none provided me with a working solution. I read that sometimes the firmware is flashed when you give the phone for repairing. I DID give my phone at the service centre once and was handed back a completely fresh install of the software.
I am very noob-y in matters related to kernels and CSC and odin. A detailed answer would be really helpful. Your patience and effort is appreciated.
Please help guys. Thanks!
You can update to the latest version of ICS for India using the PC Odin. Thats the fastest way of upgrading. Follow the instruction that Dr Ketan has for upgrading to the Indian Rom of ICS.
hope this helps.
download the stock ics from samfirmwares.com
download pc odin
enable usb debugging
unknown sources
open pc odin
just open pda and browse to the tar file and do not change any other options and flash
profest said:
Hi guys.
I am unable to update my Galaxy Note by any means. Kies says that my device does not support software upgrading via Kies. When I tried OTA, I get a message saying Failed to update firmware.
This is not the ICS upgrade. This is a 72.29 MB upgrade rolled out months back. I have tried everything with Kies. It refuses to budge.
I have browsed several threads but none provided me with a working solution. I read that sometimes the firmware is flashed when you give the phone for repairing. I DID give my phone at the service centre once and was handed back a completely fresh install of the software.
I am very noob-y in matters related to kernels and CSC and odin. A detailed answer would be really helpful. Your patience and effort is appreciated.
Please help guys. Thanks!
Click to expand...
Click to collapse
download indian ics and use pc odin to update..
see this Dr. Ketan's link http://forum.xda-developers.com/showthread.php?t=1667018
will wait for OTA update.. waited for such a longtime already!!
Karthikdoc - U dont have to wait for OTA update. It is already there.. Just keep refreshing .. I did a OTA update of Note to ICS almost a week ago .. and some even more earlier.
Profest - It would be good if you can go into
Settings --> About Phone
and provide us the Android version
Baseband version
Kernal version
Just want to make sure the samsung guys gave you a right flash and also to guide you in the right direction ..
Maybe factory reset will help.....
Afterall you will have to do it before upgrading to ICS.
Related
Anyone here still have official rom for malaysia galaxy tab. I am in desperate as most of the custom give headache to me. the one in samfirmware is now dead.
hope aout of thousands here still have that.
cheers
I recently updated to gingerbread with the help of this thread (this guide seems to be easier to follow). So far no problem with the rom.
this is not malaysian firmware ...
download the rom from here STOCK GINGERBREAD ( http://hotfile.com/dl/120112727/77ed932/P1000DXJPC_OLBJPC_DXJPC.rar.html)
follow my guide here
http://forum.xda-developers.com/showthread.php?p=15002478#post15002478
5mins and you'll done
follow this video and you'll done this is the same rom that you'll download it http://www.youtube.com/watch?v=YW79T4qoGz0&feature=player_embedded
I posted DXJPD in the general section. That is the latest official firmware for Asia including Malaysia. You can also update via kies.
Sent from my GT-P1000 using Tapatalk
bongski55 said:
I posted DXJPD in the general section. That is the latest official firmware for Asia including Malaysia. You can also update via kies.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
nah , he can't update via kies . its not available yet in malaysia . even though galaxy S1 got the update from 2weeks already >> i blame samsung malaysia in their page at facebook , and ask them to update it for the poor ppl , but they wont listen to me . DXJPD though the firmware i posted is P1000DXJPC_OLBJPC_DXJPC and this is the one for malaysia and Indo
k0sh said:
nah , he can't update via kies . its not available yet in malaysia . even though galaxy S1 got the update from 2weeks already >> i blame samsung malaysia in their page at facebook , and ask them to update it for the poor ppl , but they wont listen to me . DXJPD though the firmware i posted is P1000DXJPC_OLBJPC_DXJPC and this is the one for malaysia and Indo
Click to expand...
Click to collapse
The location has nothing to do with the update from kies. Even our friend Darkpal told us so here. I am in the Middle East(UAE) yet I was able to update to the latest Asian firmware although my tab has CSC for Philippines. There is also one report here of somebody from Malaysia who has updated to JPD.....
And even if he cannot update using kies I already provided the DXJPD file for him to flash.
CHEERS!
after tried with kies for my whole saturday daytime, i am still unable to upgrade tru kies. restart phone, computer, reinstal everythings. finally, i am almost give up. so, just use the one you gave= DXJPD.
presariov3000 said:
after tried with kies for my whole saturday daytime, i am still unable to upgrade tru kies. restart phone, computer, reinstal everythings. finally, i am almost give up. so, just use the one you gave= DXJPD.
Click to expand...
Click to collapse
Do you have a carrier locked galaxy tab?
no. it is unbranded gtab. i tried also your gingerbread (DXJPD). unfortunately it stuck at samsung glow text. go to recovery, it said E partition not mounted. now revert back to froyo.
my step using odin: put the.tar in PDA and click start with .pit file empty and repartition untick.
presariov3000 said:
no. it is unbranded gtab. i tried also your gingerbread (DXJPD). unfortunately it stuck at samsung glow text. go to recovery, it said E partition not mounted. now revert back to froyo.
my step using odin: put the.tar in PDA and click start with .pit file empty and repartition untick.
Click to expand...
Click to collapse
Don't tell me you did NOT ROOT first before flashing DXJPD?
it is rooted using Superoneclick.
P1000DXJPC ## 2.3.3 2011 May
http://hotfile.com/dl/145759696/4ffe292/P1000DXJPC_OLBJPC_DXJPC.zip.html
I installed the Gingerbread update off samfirmware on my samsung galaxy s but i would like to go back to the official firmware for vodafone UK so i can just continue updating through Kies, is it possible and if so how??
Sorry if this is in the wrong place but i have been searching the net for ages and i can't find anything and all i keep seeing is this site so i thought you guys might be able to help me.
Reinstall the original firmware you saved .
Another one that did not save then you might find somebody with firmware saved .
Or you flash stock rom via Odin use registry spoof method to try to update to Vodaphone current firmware .
Kies only updates original firmware .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
Hi, thanks alot for getting back to me, is there a tortrial or can you help explain what i have to do.
Thanks
EDMJosh said:
Hi, thanks alot for getting back to me, is there a tortrial or can you help explain what i have to do.
Thanks
Click to expand...
Click to collapse
It is quite simple. Disable any lagfix or ext4 conversion (if any) back to RFS. Flash via ODIN with preferably 512 pit & repartition (it will save you a lot of time & less opportunity of errors appearing afterwards). I would also suggest you to make a backup of your data & do a factory reset before flashing back.....
On youtube are many tutorials how to flash back to your stock rom.
example:
search: samsung galaxy s flash stock rom
-> the first video
stock roms you can download in this forum
I do not have the original VodaFone Firmware, That's why i need to change this current firmware so i can update it via Kies to the original Vodafone uk firmware, i do not know nothing about lag fixes or anything, i just used odin to update my phone to V2.3.3, i followed simple instructions to do it, it was my first time doing anything to my phone, i know i should of read into it etc....
http://forum.xda-developers.com/showthread.php?t=723596
Basic faqs .
Roll back to 2.2.1 from Beta 2.3 Gingerbread .
Post 2 but you are as always at risk of bricking your phone .
http://forum.xda-developers.com/showthread.php?t=1033781
Kies will only update stock 2.2 .1 to Vodafone firmware if you spoof the registry as posted .It will not update to Gingerbread until Gingerbread is released .
jje
I'm not very good at these things and i know i shouldn't of done it in the first place but i don't understand those instructions, is there no way anyone has it or can get it for me? or extract it from there phone or something like that?
No nobody seems to bother keeping original firmware >Try a Google search for Voda firmware .
Flash back to stock Eclair 2.1 and try below to spoof Kies.
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
That fails then your update path is via Odin .
jje
Hi, thanks alot for your time to reply to me, i have currently rooted and i have SpoofFW but when it says choose preset i dont have any in the drop down box and i need a Vodafone uk one, any help here mate?
I have posted the codes you should use in SpoofFw thread, but here you go again.
The codes can be found in the presets as UK (Vodafone) and is
Product Code: GT-I9000HKDVOD
PDA: I9000BUJG2
CSC: I9000VODVOD
Phone: I9000BUJG1
An alternative is to use Check Fus Downloader with which you can download the latest official firmware for UK Vod (I9000BUJS3) and flash that file with Odin. The app can be found in my signature.
Hi, thanks alot mate, can you please guide me through how to do it as when i try and find the preset on your app, there is none there! just blank, so i tried typing it all in and following instructions but it hasn't worked could you please explain?
It still says... This device cannot be updated and still gives me my normal product code etc...
EDMJosh said:
Hi, thanks alot mate, can you please guide me through how to do it as when i try and find the preset on your app, there is none there! just blank, so i tried typing it all in and following instructions but it hasn't worked could you please explain?
It still says... This device cannot be updated and still gives me my normal product code etc...
Click to expand...
Click to collapse
make sure you are connected to internet when you start the app, and try use Refresh preset in the menu. also make sure you have busybox installed.
first hit Backup. put the info above in the fields. and hit step 2 ok. Then press reboot, and start the app again. put the same info as before in the fields and hit ok on step 3. Conenct to Kies.
you can send me your complete log right after hitting step1 button if anything goes wrong.
Hello all,
I recently bought samsung galaxy s i 9000 it was pre loaded with froyo 2.2 and when ever i connect it to kies it gets connected for the first time and then onn if i disconnect it will never get connected unless i restart the phone.. I tried to update the firmware several times and it downloads the files but gets disconnected in between. I badly wanted to change to ginger bread and just loaded with odin.. Now, I started having the real problem its getting stuck most of the times and i had to open the task manager to free the ram.
But the video player is supporting more formats and no problem connecting with kies.. and i used it for sometime. Now while hanging up a call its getting stuck frequently. And once i had to lose most of my balance.
I decided to roll back my firmware to froyo 2.2 but I came to know I might lose the warranty tampering with O.S.. Is that really so?? And I got an asian version of froyo 2.2.1 for march 2011 from one of the threads and I flashed it into my phone. Now, kies is telling that this version cannot be updated. Can some one please suggest me
1) How I can get back my official firmware...which can also support updates in kies.
2) And Is that possible to retain warranty with any firmware?
I had to spend the whole of sunday over this please suggest me...
Thank you
go to samfirmware.com try search see u got luck there got upload the version for ur country... juz flash with odin... very easy....
Flash 2.3.3
ovsanjay said:
Hello all,
I recently bought samsung galaxy s i 9000 it was pre loaded with froyo 2.2 and when ever i connect it to kies it gets connected for the first time and then onn if i disconnect it will never get connected unless i restart the phone.. I tried to update the firmware several times and it downloads the files but gets disconnected in between. I badly wanted to change to ginger bread and just loaded with odin.. Now, I started having the real problem its getting stuck most of the times and i had to open the task manager to free the ram.
But the video player is supporting more formats and no problem connecting with kies.. and i used it for sometime. Now while hanging up a call its getting stuck frequently. And once i had to lose most of my balance.
I decided to roll back my firmware to froyo 2.2 but I came to know I might lose the warranty tampering with O.S.. Is that really so?? And I got an asian version of froyo 2.2.1 for march 2011 from one of the threads and I flashed it into my phone. Now, kies is telling that this version cannot be updated. Can some one please suggest me
1) How I can get back my official firmware...which can also support updates in kies.
2) And Is that possible to retain warranty with any firmware?
I had to spend the whole of sunday over this please suggest me...
Thank you
Click to expand...
Click to collapse
Go to www.samfirmware.com and register. Download the ROM you want. I'm currently using XXJVR (Android 2.3.4). It is quite stable.
Then, use Odin to flash the ROM onto your device. Make sure you backup all your important data. I recommend MyBackupPro. It's available in the Market.
Then, switch off your phone completely and put it in 'Download Mode' (Volume Down + Home + Power). Connect it to your PC. Make sure you have the drivers installed.
Follow the instructions given on the website to flash with Odin. The XXJVR ROM has only 1 tar file. So, you're gonna have to use this procedure--> http://www.samfirmware.com/Odin I9000 2.png
Best of luck! Do let us know how it goes!
Hi,
I flashed my SGS to CM7 and don't really like it. I have downloaded the firmware ( I9000DXJF4 )from sammobile and flashed it. However, I am unable to upgrade the firmware using Kies to the new firmware available thru Samsung.
My current version is as followed
PDA: I9000DXJF4
PHONE: I9000DXJF4
CSC: I9000OLBJF4
From the look of my phone, everything seem to be back to its original setting, with all the singtel (my telco provider ) apps. Now I am trying to upgrade to Froyo 2.2 (I think) using Kies. Kies prompted that it is unable to update the firmware. I tried the latest version of kies and also version 1.5. Both are unable to do so.
Anyone can kindly advise?
Try changing your CSC code to XEU. I encountered some issues with KIES updates when having CSC code KOR.
Hi,
I tried to change to XUE but this option is not available. I go into CSC by *#272*HHMM#. Is it wrong?
*#272*???????????????# (??????????????? it's your IMEI, it must have 15 digits)
or try https://market.android.com/details?id=com.nfye.insanity.toolbox
Hi,
Thanks for your help. I got my IMEI code. It pop up in a small window. Then I tried to change the CSC using the method u mentioned. But nothing happen. When I press the call button, it say "USSD code running..." then follow by "UNKNOWN APPLICATION"
I also tried to install the software, but it is only for android 2.2 and above. I tried to find the crack version for the premium version but cant find any. Do you have the premium version? Can upload to mediafire and send me the link?
Never try to install via KIES ..
Install via ODIN the Firmware you want it's simply better, even if ODIN is unofficial.
Introductions you will find by googleing I think .. it's easy.
Good luck and have fun
Hi,
Ya, using Odin now. But still prefer Kies over Odin. A lot of stuff become automatic with Kies.
I just flash to DXJG4 hoping to be able to link to kies but it failed.
I read that once the lagfix is fixed, there will be problem with kies. Am I fixing the lagfix in anyway thus leading to this problem?
Did you get solution to your problem? I had the same problem with a Galaxy Wonder... when i tried to upgrade via kies i got this screen..
That I cannot post actually because the forum prevents me from doing it...
BUT...
I tried OTA upgrade with perfect results... And the funny thing is that I NEVER before could start OTA...
BTW everything's fine now and I bumped to 2.3.6 ggbrd
nuky8181 said:
Hi,
I flashed my SGS to CM7 and don't really like it. I have downloaded the firmware ( I9000DXJF4 )from sammobile and flashed it. However, I am unable to upgrade the firmware using Kies to the new firmware available thru Samsung.
My current version is as followed
PDA: I9000DXJF4
PHONE: I9000DXJF4
CSC: I9000OLBJF4
From the look of my phone, everything seem to be back to its original setting, with all the singtel (my telco provider ) apps. Now I am trying to upgrade to Froyo 2.2 (I think) using Kies. Kies prompted that it is unable to update the firmware. I tried the latest version of kies and also version 1.5. Both are unable to do so.
Anyone can kindly advise?
Click to expand...
Click to collapse
You can download all the recent firmware from sammobile and you can flash it via odin. Flashing stock ROM via Odin
Hi all,
I need help here. My phone (with stock Android 2.3.6) does not upgrade through OTA and therefore I only rely on Kies.
Kies says that there is a firmware upgrade available, but when I start the upgrade process, it stops (mostly between 13 to 15%... only once it went to 65%) and then it stops and says:
"Failed to run firmware upgrade, Unknown error occurred"
I upgraded the Kies to least version already. So please help
you must have a reliable internet connection to update through Kies. If Kies fail just download an ICS ROM and upgrade via PC Odin.
And most importantly read around the threads before doing anything, the search function is your friend, it helps to be informed before jumping into something you are not familiar with.
Thanks rcaballero,
As you rightly said I would not do anything without understanding it first. I am not familiar with pc odin yet and am afraid to use it at the moment.
My internet connection is fine. I have rather tried it on 2 different internet connections till now but still no luck :-(
By the way my Kies is showing that my firmware now is: PDA:LA1 / PHONE:LA4 / CSC:LA1 (PAK)
and new firmware available is: PDA:LPD / PHONE:LPT / CSC:LP7 (PAK)
If I go for download from sammobile, should I search for the same firmware or any newer ICS ROM will work?
you could look for the same or use any other if you cannot find it, I've tried flashing ICS ROMs for India, Poland and Philippines not much of a difference.
Just stick to what's best for you